Nebula AC1200

Decompressing...done
Found ST compatible serial flash with 128 64KB blocks; total size 8MB


CFE version 9.10.178.27 (r584393) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Jul  1 10:44:14 EDT 2016 (root@linux-empc)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 392 MHz
Info: DDR frequency set from clkfreq=900,*392*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
CPU type 0x0: 900MHz
Tot mem: 65536 KBytes

CFE mem:    0x00F00000 - 0x017A367C (9057916)
Data:       0x00F6BA24 - 0x00F6C05C (1592)
BSS:        0x00F6C068 - 0x00FA167C (218644)
Heap:       0x00FA167C - 0x017A167C (8388608)
Stack:      0x017A167C - 0x017A367C (8192)
Text:       0x00F00000 - 0x00F5F8EC (391404)
Boot:       0x017A4000 - 0x017E4000
Reloc:      I:00000000 - D:00000000

Mac:c0-25-67-3e-ff-d0
Device eth0:  hwaddr C0-25-67-3E-FF-D0, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
upgrade wait time is 3s
**upgrade_wait over!
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 4177792 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
[    0.890000] console [ttyS0] enabled, bootconsole disabled
[    0.910000] brd: module loaded
[    0.920000] loop: module loaded
[    0.920000] pflash: found no supported devices
[    0.930000] bcmsflash: squash filesystem found at block 30
[    0.930000] Creating 7 MTD partitions on "bcmsflash":
[    0.940000] 0x000000000000-0x000000800000 : "All"
[    0.940000] 0x000000000000-0x000000040000 : "Bootloader"
[    0.950000] 0x000000040000-0x0000007d0000 : "KernelFS"
[    0.950000] 0x0000001e445c-0x0000007d0000 : "rootfs"
[    0.960000] 0x0000007d0000-0x0000007e0000 : "CFM_BACKUP"
[    0.960000] 0x0000007e0000-0x0000007f0000 : "CFM"
[    0.970000] 0x0000007f0000-0x000000800000 : "nvram"
[    0.970000] nflash: found no supported devices
[    0.980000] PPP generic driver version 2.4.2
[    0.980000] PPP Deflate Compression module registered
[    0.990000] PPP BSD Compression module registered
[    0.990000] PPP MPPE Compression module registered
[    1.000000] NET: Registered protocol family 24
[    1.000000] u32 classifier
[    1.000000]     Actions configured
[    1.010000] Netfilter messages via NETLINK v0.30.
[    1.010000] nf_conntrack version 0.5.0 (938 buckets, 3752 max)
[    1.020000] [BM CORE     ]  INFO: online ip data hash table created, size = 199
[    1.020000] [BM CORE     ]  INFO: online_ip proc file created
[    1.030000] ctnetlink v0.93: registering with nfnetlink.
[    1.030000]  create /proc/behavior/emailbcc SUCCESSFULLY.
[    1.040000] netfilter smtp init successfully
[    1.040000] xt_time: kernel timezone is -0000
[    1.040000] Kernel:Init flow dev success.
[    1.050000] IPv4 over IPv4 tunneling driver
[    1.050000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.060000] TCP cubic registered
[    1.060000] NET: Registered protocol family 17
[    1.060000] L2TP core driver, V2.0
[    1.070000] PPPoL2TP kernel driver, V2.0
[    1.070000] L2TP IP encapsulation support (L2TPv3)
[    1.070000] L2TP netlink interface
[    1.080000] L2TP ethernet pseudowire support (L2TPv3)
[    1.080000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    1.090000] All bugs added by David S. Miller <davem@redhat.com>
[    1.140000] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[    1.150000] brcmnand: found no supported devices
[    1.150000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.160000] devtmpfs: mounted
[    1.170000] Freeing init memory: 196K
[    1.180000] Failed to execute /sbin/preinit.  Attempting defaults...
mkdir: can't create directory '/var/run': File exists
[    3.200000] _fastnat_attach: fastnat attach is successful  register.
[    3.200000] fastnat_switch_init_proc success
[    3.220000] fastnat_init: FastNat_init successful .
[    3.250000] [BM CORE     ]  INFO: bm_init success
[    3.270000] bm_debug_init_proc success!
[    3.270000] [U2K MODULE  ]  INFO: bm_u2k_info_init success
[    3.310000] [MAC FILTER  ]  INFO: bm_mac_filter init success
[    3.400000] [QOS         ]  INFO: qos module init success
[    3.470000] OS TYPE INIT FINISHED
[    3.470000] [URL FILTER  ]  INFO: url filter init success
Give root password for system maintenance
(or type Control-D for normal startup):[    3.670000] udevd (334): /proc/334/oom_adj is deprecated, please use /proc/334/oom_score_adj instead.
init_core_dump 1791: rlim_cur = 0, rlim_max = -1
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
func:InitCfm begin load_mib....
flash_read:ret = 65536
crc = 2122daf, newcrc = 2122daf
flash_read:ret = 65536
crc = d3815a13, newcrc = d3815a13

######## STARTING PROGRAM #########
flash_read:ret = 65536
crc = 2122daf, newcrc = 2122daf
flash_to_file:open Policy failed.
going to rewrite flash...
open /etc/policy_bak.cfg failed.
rewrite flash ok...
failure to open policy source: /etc/policy.cfg
left lan[0]:0
left lan[1]:1
left lan[2]:2
left wan[0]:3
left lan[3]:4
vlan_array[0]: value 0  index_num 4 name eth0 cpu_port 5index[0] 0  index[1] 1  index[2] 2  index[3] 4  index[4] 0
vlan_array[1]: value 1  index_num 1 name eth0 cpu_port 5index[0] 3  index[1] 0  index[2] 0  index[3] 0  index[4] 0
vlan_array[2]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0
vlan_array[3]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0
vlan_array[4]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0
nvram unset vlan1ports
nvram unset vlan2ports
nvram unset vlan3ports
nvram unset vlan4ports
nvram unset vlan5ports
nvram set vlan1ports="0  1  2  4  5*"
nvram set vlan2ports="3  5"
#IPTV STB VLAN ID mode is disable!#
main=>100:init server success.1..
No need to start gpio thread.
[    4.660000] et: module license 'Proprietary' taints kernel.
[    4.670000] Disabling lock debugging due to kernel taint
[    4.690000] et_module_init: passivemode set to 0x0
[    4.700000] et_module_init: txworkq set to 0x0
[    4.700000] et_module_init: et_txq_thresh set to 0xce4
[    4.710000] et_module_init: et_rxlazy_timeout set to 0x3e8
[    4.710000] et_module_init: et_rxlazy_framecnt set to 0x20
[    4.720000] stbport=0=wanport=3=
[    4.740000] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/net/proxyarp/proxyarp.ko': No such file or directory
[    6.670000] wl_module_init: passivemode set to 0x0
[    6.670000] wl_module_init: txworkq set to 0x0
[    6.700000] External imprecise Data abort at addr=0x1f4fc, fsr=0x1c06, pc=0x801e6a08 lr=0x80219cd4 ignored.
[    6.710000] External imprecise Data abort at addr=0x1f4fc, fsr=0x1c06, pc=0x7f09bafc lr=0x80219cd4 ignored.
[    6.730000] eth1: Broadcom BCM43b6 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST)
[    6.740000] PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
[    6.780000] eth2: Broadcom BCM43227 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST)
sh: can't create /proc/irq/163/smp_affinity: nonexistent directory
sh: can't create /proc/irq/169/smp_affinity: nonexistent directory
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCGIFFLAGS: No such device
### set br0 mac [c0:25:67:3e:ff:d0]### [5]
##############add vlan devices [vconfig add eth0 1]
##############add vlan devices [vconfig add eth0 2]
[    7.080000] device eth0 entered promiscuous mode
ifconfig: SIOCSIFHWADDR: No such device
[    7.190000] device vlan1 entered promiscuous mode
[    7.210000] br0: topology change detected, propagating
[    7.220000] br0: port 1(vlan1) entering forwarding state
[    7.220000] br0: port 1(vlan1) entering forwarding state
[    7.240000] IPv4 FIB: Using LC-trie version 0.409
Sun May  1 00:00:00 UTC 2011
Loading dnrd...
killall: dnrd: no process killed
_eval 98: child process create success
_eval 98: child process create success
_start_time_check 202: time_check register success, register_pid = 437
_eval 94: child process status is 0
_start_httpd 219: httpd register success, register_pid = 438
_eval 94: child process status is 0
_start_multiwan 259: _start_multiwan register success, register_pid = 439
_eval 94: child process status is 0
_start_ucloud_v2 312: ucloud_v2 register success, register_pid = 440
_eval 94: child process status is 0
_start_buisness_proc 336: buisness_proc register success, register_pid = 441
business_proc
ucloud_v2
httpd
multiWAN
netctrl
time_check
logserver.c check network 192.168.0.1 success
init_core_dump 1791: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1791: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1791: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
######## RECEIVING DATA #########


Yes:

      ****** WeLoveLinux******

 Welcome to ...
[TIMER_CHECK >>time_check_reboot_info_printf(51)]:               enable:1
[TIMER_CHECK >>time_check_reboot_info_printf(52)]:               type:1
[TIMER_CHECK >>time_check_reboot_info_printf(57)]:               wday_en:1;1;1;1;1;1;1
[TIMER_CHECK >>time_check_reboot_info_printf(58)]:               start_time:03:00
[TIMER_CHECK >>time_check_reboot_info_printf(59)]:               end_time:05:00
[TIMER_CHECK >>time_check_reboot_info_printf(60)]:               max_speed:3
[TIMER_CHECK >>time_check_reboot_info_printf(61)]:               check_speed=3000
[TIMER_CHECK >>time_check_reboot_info_printf(62)]:               wan_ifnames:vlan2
[TIMER_CHECK >>time_check_power_info_printf(48)]:                enable:0
[TIMER_CHECK >>time_check_power_info_printf(49)]:                type:1
[TIMER_CHECK >>time_check_power_info_printf(54)]:                wday_en:1;1;1;1;1;1;1
[TIMER_CHECK >>time_check_power_info_printf(55)]:                start_time:00:00
[TIMER_CHECK >>time_check_power_info_printf(56)]:                end_time:07:00
[TIMER_CHECK >>time_check_power_info_printf(57)]:                max_speed:3
[TIMER_CHECK >>time_check_power_info_printf(58)]:                check_speed=3000
wl2g_op:0 wl5g_op:0
not need to write flash,crc:[6fc58681]
commit cfm failed or not need write flash
RTNETLINK answers: Operation not supported
create socket  fail -1
sh: can't create /proc/br0_ip: nonexistent directory
[httpd][debug]----------------------------webs.c,157
httpd listen ip = 192.168.0.1 port = 80
webs: Listening for HTTP requests at address 192.168.0.1
[    9.740000] max_new_conntrack=4000
sh: nkgw: not found
Debug->tpi_port.c: tpi_port_handle(61)--type = 0
Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1
Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0
set port 3 to AUTO
[ DEBUG ] ******Sucessed to change lan config! ******
killall: dhttpd: no process killed
not need to write flash,crc:[6fc58681]
commit cfm failed or not need write flash
not need to write flash,crc:[6fc58681]
commit cfm failed or not need write flash
iptables: No chain/target/match by that name.
********************************
        goahead  3.3.0 start
********************************
goahead: 4: main----51

goahead: 4: initPlatform----398

goahead: 4: websOpen----228

iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: Index of insertion too big.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
goahead: 0: Can't get host address for host Nexxt: errno 97, use Local:127.0.0.1
cgi/main.c check network 192.168.0.2 success
dlan_ip:192.168.0.2
endpoint[http://192.168.0.2:80]
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
killall: 3322ip: no process killed
killall: 88ip: no process killed
killall: gnway: no process killed
iptables v1.4.12.2: Couldn't load target `icmp_drop':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
killall: inadyn: no process killed
iptables: No chain/target/match by that name.
rm: can't remove '/etc/ddns_*': No such file or directory
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
Error: argument "xmain" is wrong: invalid table ID

Error: argument "xmain" is wrong: invalid table ID

RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
iptables v1.4.12.2: Couldn't load target `access_ctrl':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
nbns task start:
arp task satrt:
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
miniupnpd.c,865,ver=ARN04904U2,osname=Nebula1200-AC,osver=ARN04904U2,osurl=http://192.168.0.1,manuft=Nexxt Solutions,descri=Dual Band AC1200 Wireless Router
RTNETLINK answers: No such file or directory
dhcpsCfgToStruct 555: lan type is
dhcps_lan_dhcpc_configure 272: lan dhcp client not get ip
[   17.210000] [QOS         ]  INFO: g_qos_enable = disable
[   17.370000] Init gsbmac dev success.
[   17.370000] The ARP attack defence is init v1 successful
killall: arpbrocast: no process killed
[   17.430000] Kernel:Init attack fence dev success.
[   17.440000] the ddos ip attack defnence init successful
[   17.450000] SET_LAN_PARAM_DATA k_data:
[   17.450000]  lan ip:3232235521
[   17.450000]  lan mask:4294967040
[   17.460000]  lan submask:3232235520
[   17.460000]  lan interface:br0
[   17.460000]  lan http port:80
icmp is 1,1500,u[   17.470000] set the proceee ture
dp is 1,1500,tcp[   17.470000] SET_IPOP_FENCE_ATTACK_DATA k_data:
_syn is 1,1500
[   17.480000]  ip options:32512
[   17.480000] SET_BAD_PKT_FENCE_ATTACK_DATA k_data:
[   17.480000]  bad pkt:248
[   17.490000] SET_DDOS_FENCE_ATTACK_DATA k_data:
[   17.490000]  status:7
[   17.490000]  tcp threshold:1500
[   17.500000]  udp threshold:1500
[   17.500000]  icmp threshold:1500
---------->>[ start_wifi, wl_rate=24 ]
26755137
killall: wps_monitor: no process killed
killall: nas: no process killed
killall: eapd: no process killed
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
killall: acsd: no process killed
CJ+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++set wl1 value = auto
[   18.280000] CJ++ init gpioouten in hw_init status 1
###fd failed to recv packet!###
mdns task start:
##### NO SERVER FOUND! #####
eth2: cmd=231: Invalid argument
eth2: WLC_SET_VAR(chanspec): Invalid argument
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not sup[   18.440000] CJ++ init gpioouten in hw_init status 1
ported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth2: WLC_SET_VAR(taf): Operation not supported
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
eth2: WLC_GET_VAR(apcschspec): Invalid argument
[   19.870000] device eth2 entered promiscuous mode
[   19.880000] br0: topology change detected, propagating
[   19.880000] br0: port 2(eth2) entering forwarding state
[   19.890000] br0: port 2(eth2) entering forwarding state
Invalid instance identifier br0

[ ERROR ] Bad list or target.
[ ERROR ] Bad list or target.
[ ERROR ] Bad list or target.
eth1: WLC_GET_VAR(psta_if): Invalid argument
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
===name(eth1) unit(0)===
td_acs >>td_acs_init_dev_name(2570): ifname eth1: radio is on
td_acs >>td_acs_init_dev_name(2580): ifname eth1: auto channel is enable
===name(eth2) unit(1)===
td_acs >>td_acs_init_dev_name(2570): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2580): ifname eth2: auto channel is enable
td_acs >>td_acs_init_cfg(480): set invalid ch:12
td_acs >>td_acs_init_cfg(480): set invalid ch:13
td_acs >>td_acs_init_cfg(495): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
eth1: WLC_GET_VAR(bw_cap): Invalid argument
td_acs >>td_acs_init_rsi(539): failed to get bw_capret code: -1
td_acs >>td_acs_info_init(578): dev(eth1) acs_init_rsi fail
====td_acs_exit====
[   20.340000] wisp or APC is close
---------->>[ start_wifi, wl_rate=5 ]
26755137
[ ERROR ] coutry_code=TW
killall: wps_monitor: no process killed
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
killall: acsd: no process killed
CJ+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++set wl0 value = auto
[   20.860000] CJ++ init gpioouten in hw_init status 1
eth1: cmd=231: Invalid argument
eth1: WLC_SET_VAR(chanspec): Invalid argument
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_[   20.980000] CJ++ init gpioouten in hw_init status 1
limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth1: WLC_SET_VAR(taf): Operation not supported
eth1: cmd=64: Operation not supported
eth1: WLC_GET_VAR(apcschspec): Invalid argument
eth1: WLC_GET_VAR(apcschspec): Invalid argument
eth1: WLC_GET_VAR(apcschspec): Invalid argument
eth1: WLC_GET_VAR(apcschspec): Invalid argument
eth1: WLC_GET_VAR(apcschspec): Invalid argument
eth1: WLC_GET_VAR(apcschspec): Invalid argument
[   22.230000] device eth1 entered promiscuous mode
[   22.240000] br0: topology change detected, propagating
[   22.240000] br0: port 3(eth1) entering forwarding state
[   22.250000] br0: port 3(eth1) entering forwarding state
Invalid instance identifier br0

device br1 already exists; can't create bridge with the same name
[ ERROR ] Bad list or target.
[ ERROR ] Bad list or target.
[ ERROR ] Bad list or target.
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
===name(eth1) unit(0)===
td_acs >>td_acs_init_dev_name(2570): ifname eth1: radio is on
td_acs >>td_acs_init_dev_name(2580): ifname eth1: auto channel is enable
===name(eth2) unit(1)===
td_acs >>td_acs_init_dev_name(2570): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2580): ifname eth2: auto channel is enable
td_acs >>td_acs_init_cfg(480): set invalid ch:12
td_acs >>td_acs_init_cfg(480): set invalid ch:13
td_acs >>td_acs_init_cfg(495): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(547): band_type:1 bw_cap: 7 coex_enb:1
===td_acs_scan_timer_func==(eth1)==
td_acs >>td_acs_scan_timer_func(1768): band_type:1 bw_cap: 7 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(628): scan channel number: 9
td_acs >>td_acs_scan_prep(631): params size: 82
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs >>td_acs_get_scan(812): list->count: 11, list->buflen: 4248
td_acs: selected_chspec=0xe09b
td_acs >>td_acs_init_cfg(480): set invalid ch:12
td_acs >>td_acs_init_cfg(480): set invalid ch:13
td_acs >>td_acs_init_cfg(495): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(547): band_type:2 bw_cap: 3 coex_enb:1
===td_acs_scan_timer_func==(eth2)==
td_acs >>td_acs_scan_timer_func(1768): band_type:2 bw_cap: 3 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(628): scan channel number: 11
td_acs >>td_acs_scan_prep(631): params size: 86
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs >>td_acs_get_scan(812): list->count: 46, list->buflen: 15564
td_acs >>td_acs_adjust_second_chan(1556): ctrl_ch:9 middle: 0=7 1=11
td_acs >>td_acs_adjust_second_chan(1580): selected mid: 0=7
td_acs >>td_acs_adjust_second_chan(1591): Final selected chanspec: 0x1907
td_acs: selected_chspec=0x1907
[   27.910000] wisp or APC is close
msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start]
tpi_sntp_handle(102): start sntp...
systime_server = 211.138.200.208
main,421,sntp_en =1,tz=7.00,checktime=86400
[TIMER_CHECK >>init_time_check_module_var(146)]:key = relate_module_id,value = 19
[TIMER_CHECK >>init_time_check_module_var(154)]:key = string_info,value = first_time_start
===name(eth1) unit(0)===
td_acs >>td_acs_init_dev_name(2570): ifname eth1: radio is on
td_acs >>td_acs_init_dev_name(2580): ifname eth1: auto channel is enable
===name(eth2) unit(1)===
td_acs >>td_acs_init_dev_name(2570): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2580): ifname eth2: auto channel is enable
td_acs >>td_acs_init_cfg(480): set invalid ch:12
td_acs >>td_acs_init_cfg(480): set invalid ch:13
td_acs >>td_acs_init_cfg(495): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(547): band_type:1 bw_cap: 7 coex_enb:1
===td_acs_scan_timer_func==(eth1)==
td_acs >>td_acs_scan_timer_func(1768): band_type:1 bw_cap: 7 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(628): scan channel number: 9
td_acs >>td_acs_scan_prep(631): params size: 82
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs >>td_acs_get_scan(812): list->count: 11, list->buflen: 4248
td_acs: selected_chspec=0xe09b
td_acs >>td_acs_init_cfg(480): set invalid ch:12
td_acs >>td_acs_init_cfg(480): set invalid ch:13
td_acs >>td_acs_init_cfg(495): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(547): band_type:2 bw_cap: 3 coex_enb:1
===td_acs_scan_timer_func==(eth2)==
td_acs >>td_acs_scan_timer_func(1768): band_type:2 bw_cap: 3 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(628): scan channel number: 11
td_acs >>td_acs_scan_prep(631): params size: 86
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs: scan in progress ...
td_acs >>td_acs_get_scan(812): list->count: 49, list->buflen: 16568
td_acs >>td_acs_adjust_second_chan(1556): ctrl_ch:1 middle: 0=0 1=3
td_acs >>td_acs_adjust_second_chan(1580): selected mid: 0=0
td_acs >>td_acs_adjust_second_chan(1588): selected:0x1900 is invaild,use org:0x1803
td_acs >>td_acs_adjust_second_chan(1591): Final selected chanspec: 0x1803
td_acs: selected_chspec=0x1803
tpi_set_user_policy,35: entry count:0
[ DEBUG ] lan dhcp not[   35.130000] [MAC FILTER  ]  INFO: g_mac_filter_enable = disable, mf_default_action = accept
 enable
[   35.140000] [URL FILTER  ]  INFO: g_uf_enable = disable
[   35.140000] [MAC FILTER  ]  INFO: g_mac_filter_enable = disable, mf_default_action = accept
[   35.150000] [URL FILTER  ]  INFO: g_uf_enable = disable
[llllllm]telnetd_start(58)
[ INFO ] telnetd_restart[37] Start telnet, listen 192.168.0.1:23
[ DEBUG ] *****netctrl init module entries ok.*****
create socket  fail -1
create socket  fail -1
sh: u_yunsafe: not found
===td_acs_run_scan_mark==(eth1) mark:0==
===td_acs_run_scan_mark==(eth2) mark:0==