CPBoot 1.3.0.1 (build 28907)
Built: 2011-06-24 at 13:46:04
DRAM:  DDR2 running at 533Mhz (with ECC)
DRAM:  Total = 2048 MB
POST:  Memory test: Physical 0x00000000 - 0x10000000 - quick test
       Memory test: Physical 0x10000000 - 0x80000000 - quick test
PASS
CPU:   XLR732 rev. C4  Clock: 1200MHz
Board: M3mk1
XPLD:  rev: 21
SMP:   All 32 cpus successfully started
Boot:  Primary bootflash partition
PCI:   Scanning Bus 0:
       PCI device 182e:0000, 00:00 0
       PCI device 14e4:b309, 00:04 0
FPGA:  Pinot Configured
POST2: OK
Restart required for Pinot PCI Rescan..

CPBoot 1.3.0.1 (build 28907)
Built: 2011-06-24 at 13:46:04
DRAM:  DDR2 running at 533Mhz (with ECC)
DRAM:  Total = 2048 MB
POST:  Memory test: Physical 0x00000000 - 0x10000000 - quick test
       Memory test: Physical 0x10000000 - 0x80000000 - quick test
PASS
CPU:   XLR732 rev. C4  Clock: 1200MHz
Board: M3mk1
XPLD:  rev: 21
SMP:   All 32 cpus successfully started
Boot:  Primary bootflash partition
PCI:   Scanning Bus 0:
       PCI device 182e:0000, 00:00 0
       PCI device 14e4:b309, 00:04 0
       PCI device 10ee:4062, 00:05 0
POST:
       ibuf Data Bus Test
       ibuf Address Bus Test: 0x0 - 0x10000000
       obuf Data Bus Test
       obuf Address Bus Test: 0x0 - 0x10000000
       rldram Data Bus Test
       rldram Address Bus Test: 0x0 - 0x2000000
       PASS
POST2: OK
Net:   xlr_gmac0
IDE:   Bus 0: OK
       Device 0: Model: CF 512MB Firm: 20080112 Ser#: 2012B     0000122325
                 Type: Removable Hard Disk
                 Capacity: 502.0 MB = 0.4 GB (1028160 x 512)

Hit any key to stop autoboot:  0
Loading image 0:1###############################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################

Image is signed; verifying checksum...
passed
Signer Cert OK
Policy Cert OK
RSA signature verified.

Booting image...
Uncompressing core image files... 00:00:08  done. 00:00:32

Aruba Networks
ArubaOS Version 6.4.2.14 (build 52696 / label #52696)
Built by p4build@lesbos on 2015-11-24 at 13:58:48 PST (gcc version 3.4.3)
Copyright (c) 2002-2015, Aruba Networks, Inc.

          <<<<<    Welcome to Aruba Networks - Aruba A6000-US    >>>>>

Checking Inventory...OK
Watchdog processes Starting ...
No of processor 8
Watchdog processes running ...
Performing CompactFlash fast test...  Checking for file system...
Passed.
Performing integrity check on Ancillary partition 1...passed.
Tuning IPv4 route cache...done.
Reboot Cause: Power Failure (Intent:cause:register ee:ee:0)
Downloading SOS for A6000... done.
Restoring the database...done.
Generating SSH Keys......done.
Initializing TPM and Certificates
TPM and Certificate Initialization successful.
Checking for Mobility Processor update...
Mobility Processor Image uptodate.
Reading configuration from default.cfg
Retrieving Configuration...will take approximately 1 minute


(Aruba6000)
User:
User: admin
Password:
User: admin
Password: *****
User: admin
Password: ****
User: admin
Password:
User: admin
Password: *******
User: password
Password: *********
(Aruba6000) >show license limit
                          ^
% Invalid input detected at '^' marker.

(Aruba6000) >show license
                  ^
% Invalid input detected at '^' marker.

(Aruba6000) >en
Password:*********
Password:*********
Password:
Password:*****
(Aruba6000) >show license limit
                          ^
% Invalid input detected at '^' marker.

(Aruba6000) >en
Password:*****
Password:*****
Password:****
(Aruba6000) >
(Aruba6000) >
(Aruba6000) >
(Aruba6000) >en
Password:******
Password:******
Password:******
(Aruba6000) #show license limit
You do not have permission to execute this show command show license limits

(Aruba6000) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z

(Aruba6000) (config) #mgmt-user admin root
Password:
Error: Invalid password length try again

(Aruba6000) (config) #mgmt-user admin root
Password:********
Re-Type password:********
(Aruba6000) (config) #exit
(Aruba6000) #exit
(Aruba6000) >exit
(Aruba6000)
User: admin
Password: ********
(Aruba6000) >enable
Password:******
(Aruba6000) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z

(Aruba6000) (config) #enable secret
Password:********
Re-Type password:********
(Aruba6000) (config) #write memory
Saving Configuration...

Configuration Saved.

(Aruba6000) (config) #show license limit

License Limits
--------------
Limit  Value
-----  -----
0      Access Points
0      RF Protect
0      xSec Module
0      120abg Upgrade
0      121abg Upgrade
0      124abg Upgrade
0      125abg Upgrade
0      Next Generation Policy Enforcement Firewall Module
0      Advanced Cryptography
0      Service provider AP

(Aruba6000) (config) #