Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@tim:~# smartctl -q noserial -x /dev/nvme0
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Number: Samsung SSD 950 PRO 256GB
- Firmware Version: 1B0QBXX7
- PCI Vendor/Subsystem ID: 0x144d
- IEEE OUI Identifier: 0x002538
- Controller ID: 1
- Number of Namespaces: 1
- Namespace 1 Size/Capacity: 256,060,514,304 [256 GB]
- Namespace 1 Utilization: 49,537,294,336 [49.5 GB]
- Namespace 1 Formatted LBA Size: 512
- Local Time is: Wed Sep 27 11:57:41 2017 CDT
- Firmware Updates (0x06): 3 Slots
- Optional Admin Commands (0x0007): Security Format Frmw_DL
- Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
- Maximum Data Transfer Size: 32 Pages
- Supported Power States
- St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
- 0 + 6.50W - - 0 0 0 0 5 5
- 1 + 5.80W - - 1 1 1 1 30 30
- 2 + 3.60W - - 2 2 2 2 100 100
- 3 - 0.0700W - - 3 3 3 3 500 5000
- 4 - 0.0050W - - 4 4 4 4 2000 22000
- Supported LBA Sizes (NSID 0x1)
- Id Fmt Data Metadt Rel_Perf
- 0 + 512 0 0
- === START OF SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
- Critical Warning: 0x00
- Temperature: 54 Celsius
- Available Spare: 100%
- Available Spare Threshold: 10%
- Percentage Used: 1%
- Data Units Read: 10,031,329 [5.13 TB]
- Data Units Written: 15,954,371 [8.16 TB]
- Host Read Commands: 330,405,934
- Host Write Commands: 214,829,198
- Controller Busy Time: 1,718
- Power Cycles: 611
- Power On Hours: 16,471
- Unsafe Shutdowns: 415
- Media and Data Integrity Errors: 0
- Error Information Log Entries: 3
- Error Information (NVMe Log 0x01, max 64 entries)
- Num ErrCount SQId CmdId Status PELoc LBA NSID VS
- 0 3 0 0x0000 0x4212 0x000 0 255 -
- 1 2 0 0x001f 0x4004 0x000 0 0 -
- 2 1 0 0x001e 0x4004 0x000 0 0 -
- root@bob:~# smartctl -x -q noserial /dev/sda
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: Samsung SSD 850 PRO 128GB
- Firmware Version: EXM02B6Q
- User Capacity: 128,035,676,160 bytes [128 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
- Local Time is: Wed Sep 27 11:48:43 2017 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Unexpected SCT status 0x0001 (action_code=4, function_code=2)
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x53) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 68) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 9 Power_On_Hours -O--CK 095 095 000 - 20986
- 12 Power_Cycle_Count -O--CK 099 099 000 - 17
- 177 Wear_Leveling_Count PO--C- 099 099 000 - 46
- 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
- 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
- 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
- 183 Runtime_Bad_Block PO--C- 100 100 010 - 0
- 187 Reported_Uncorrect -O--CK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O--CK 071 061 000 - 29
- 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
- 235 Unknown_Attribute -O--C- 099 099 000 - 4
- 241 Total_LBAs_Written -O--CK 099 099 000 - 1628163790
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 1 Comprehensive SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x13 GPL R/O 1 SATA NCQ Send and Receive log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 16 Device vendor specific log
- 0xa5 GPL,SL VS 16 Device vendor specific log
- 0xce GPL,SL VS 16 Device vendor specific log
- 0xde SL VS 1 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 1 (0x0001)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 29 Celsius
- Power Cycle Min/Max Temperature: ?/ ? Celsius
- Lifetime Min/Max Temperature: ?/ ? Celsius
- Under/Over Temperature Limit Count: 0/160191
- SCT Temperature History Version: 2
- Temperature Sampling Period: 10 minutes
- Temperature Logging Interval: 10 minutes
- Min/Max recommended Temperature: ?/ ? Celsius
- Min/Max Temperature Limit: ?/ ? Celsius
- Temperature History Size (Index): 128 (117)
- Index Estimated Time Temperature Celsius
- 118 2017-09-26 14:30 27 ********
- ... ..( 4 skipped). .. ********
- 123 2017-09-26 15:20 27 ********
- 124 2017-09-26 15:30 28 *********
- ... ..( 6 skipped). .. *********
- 3 2017-09-26 16:40 28 *********
- 4 2017-09-26 16:50 29 **********
- ... ..( 27 skipped). .. **********
- 32 2017-09-26 21:30 29 **********
- 33 2017-09-26 21:40 30 ***********
- ... ..( 2 skipped). .. ***********
- 36 2017-09-26 22:10 30 ***********
- 37 2017-09-26 22:20 31 ************
- 38 2017-09-26 22:30 31 ************
- 39 2017-09-26 22:40 31 ************
- 40 2017-09-26 22:50 30 ***********
- ... ..( 49 skipped). .. ***********
- 90 2017-09-27 07:10 30 ***********
- 91 2017-09-27 07:20 29 **********
- ... ..( 25 skipped). .. **********
- 117 2017-09-27 11:40 29 **********
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
- root@craig:~# smartctl -x -q noserial /dev/sdc
- smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-2-amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Samsung based SSDs
- Device Model: Samsung SSD 850 PRO 128GB
- Firmware Version: EXM02B6Q
- User Capacity: 128,035,676,160 bytes [128 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Sep 27 11:58:55 2017 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Unexpected SCT status 0x0001 (action_code=4, function_code=2)
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x53) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 68) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 3
- 9 Power_On_Hours -O--CK 095 095 000 - 23320
- 12 Power_Cycle_Count -O--CK 099 099 000 - 124
- 177 Wear_Leveling_Count PO--C- 098 098 000 - 87
- 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 3
- 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
- 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
- 183 Runtime_Bad_Block PO--C- 099 099 010 - 3
- 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 797
- 190 Airflow_Temperature_Cel -O--CK 070 051 000 - 30
- 195 ECC_Error_Rate -O-RC- 199 199 000 - 797
- 199 CRC_Error_Count -OSRCK 099 099 000 - 2
- 235 POR_Recovery_Count -O--C- 099 099 000 - 44
- 241 Total_LBAs_Written -O--CK 099 099 000 - 14248391191
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 1 Comprehensive SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x13 GPL R/O 1 SATA NCQ Send and Receive log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 16 Device vendor specific log
- 0xa5 GPL,SL VS 16 Device vendor specific log
- 0xce GPL,SL VS 16 Device vendor specific log
- 0xde SL VS 1 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 17701 -
- # 2 Extended offline Completed without error 00% 8048 -
- # 3 Extended offline Completed without error 00% 8036 -
- # 4 Extended offline Completed: read failure 00% 7849 81110632
- 1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 1
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 1 (0x0001)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 30 Celsius
- Power Cycle Min/Max Temperature: ?/ ? Celsius
- Lifetime Min/Max Temperature: ?/ ? Celsius
- Under/Over Temperature Limit Count: 0/134530
- SCT Temperature History Version: 2
- Temperature Sampling Period: 10 minutes
- Temperature Logging Interval: 10 minutes
- Min/Max recommended Temperature: ?/ ? Celsius
- Min/Max Temperature Limit: ?/ ? Celsius
- Temperature History Size (Index): 128 (111)
- Index Estimated Time Temperature Celsius
- 112 2017-09-26 14:40 28 *********
- ... ..( 4 skipped). .. *********
- 117 2017-09-26 15:30 28 *********
- 118 2017-09-26 15:40 29 **********
- ... ..( 15 skipped). .. **********
- 6 2017-09-26 18:20 29 **********
- 7 2017-09-26 18:30 30 ***********
- ... ..( 18 skipped). .. ***********
- 26 2017-09-26 21:40 30 ***********
- 27 2017-09-26 21:50 31 ************
- ... ..( 56 skipped). .. ************
- 84 2017-09-27 07:20 31 ************
- 85 2017-09-27 07:30 30 ***********
- ... ..( 25 skipped). .. ***********
- 111 2017-09-27 11:50 30 ***********
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
- root@lisa:~# smartctl -x -q noserial /dev/sda
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: SanDisk SDSSDRC032G
- Firmware Version: 3.1.0
- User Capacity: 32,017,047,552 bytes [32.0 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 1.8 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 T13/2015-D revision 3
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Sep 27 11:58:52 2017 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 254 (maximum performance)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Unavailable
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x51) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 7) minutes.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
- 9 Power_On_Hours -O---- 100 100 000 - 15314
- 12 Power_Cycle_Count -O---- 100 100 000 - 1260
- 165 Unknown_Attribute -O---- 100 100 000 - 1753634
- 171 Unknown_Attribute -O---- 100 100 000 - 0
- 172 Unknown_Attribute -O---- 100 100 000 - 0
- 173 Unknown_Attribute -O---- 100 100 000 - 439
- 174 Unknown_Attribute -O---- 100 100 000 - 51
- 187 Reported_Uncorrect -O---- 100 100 000 - 0
- 194 Temperature_Celsius -O---K 065 035 000 - 35 (Min/Max 5/46)
- 230 Unknown_SSD_Attribute -O---- 100 100 000 - 1463
- 232 Available_Reservd_Space PO---- 100 100 005 - 0
- 234 Unknown_Attribute -O---- 100 100 000 - 493
- 241 Total_LBAs_Written -O---- 100 100 000 - 1989272865
- 242 Total_LBAs_Read -O---- 100 100 000 - 114010743391
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 GPL,SL R/O 1 Summary SMART error log
- 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 GPL,SL R/O 1 SMART self-test log
- 0x09 GPL,SL R/W 1 Selective self-test log
- 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 1 Device vendor specific log
- 0xa2 GPL,SL VS 2 Device vendor specific log
- 0xa3 GPL,SL VS 1 Device vendor specific log
- 0xa6-0xa7 GPL,SL VS 255 Device vendor specific log
- Warning! SMART Extended Comprehensive Error Log Structure (16/16) error: invalid SMART checksum.
- SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
- No Errors Logged
- SMART Extended Self-test Log (GP Log 0x07) not supported
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Commands not supported
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Description
- 5 ===== = = == Temperature Statistics (rev 1) ==
- 5 0x008 1 35 Current Temperature
- 5 0x010 1 34 Average Short Term Temperature
- 5 0x018 1 34 Average Long Term Temperature
- 5 0x020 1 46 Highest Temperature
- 5 0x028 1 23 Lowest Temperature
- 5 0x030 1 40 Highest Average Short Term Temperature
- 5 0x038 1 40 Lowest Average Short Term Temperature
- 5 0x040 1 38 Highest Average Long Term Temperature
- 5 0x048 1 38 Lowest Average Long Term Temperature
- 5 0x050 4 0 Time in Over-Temperature
- 5 0x058 1 95 Specified Maximum Operating Temperature
- 5 0x060 4 0 Time in Under-Temperature
- 5 0x068 1 0 Specified Minimum Operating Temperature
- 7 ===== = = == Solid State Device Statistics (rev 1) ==
- 7 0x008 1 14~ Percentage Used Endurance Indicator
- |_ ~ normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0001 2 0 Command failed due to ICRC error
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement