Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2016.01 (Jul 08 2021 - 07:16:48 +0000), Build: jenkins-common_router_openwrt_ota_publish-1455
- DRAM: smem ram ptable found: ver: 1 len: 4
- 512 MiB
- NAND: ONFI device found
- ID = 158061c8
- Vendor = c8
- Device = 61
- SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
- ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
- 128 MiB
- MMC: sdhci: Node Not found, skipping initialization
- ## Error: flags type check failure for "ethaddr" <= ""00:AA:BB:CC:DD:10"" (type: m)
- himport_r: can't insert "ethaddr="00:AA:BB:CC:DD:10"" into hash table
- PCI1 is not defined in the device tree
- In: serial@78B3000
- Out: serial@78B3000
- Err: serial@78B3000
- machid: 8010010
- MMC Device 0 not found
- eth5 MAC Address from ART is not valid
- write phy_id=1, reg(0x8074):0x0670
- write phy_id=2, reg(0x8074):0x0670
- write phy_id=3, reg(0x8074):0x0670
- write phy_id=4, reg(0x8074):0x0670
- bootwait is off, bootdelay=5
- Hit any key to stop autoboot: 0
- detect button press, continue check 5 secs
- detect button pressed 5 secs !
- confirm to launch xq_upgrade !
- cmd=dhcp
- Net: MAC0 addr:64:64:4a:XX:a:XX <---******* Could be this a bug?? Should the MAC should be 64:64:4a:XX:0a:XX ********
- PHY ID1: 0x4d
- PHY ID2: 0xd0b1
- EDMA ver 1 hw init
- Num rings - TxDesc:1 (0-0) TxCmpl:1 (7-7)
- RxDesc:1 (15-15) RxFill:1 (7-7)
- ipq807x_edma_alloc_rings: successfull
- ipq807x_edma_setup_ring_resources: successfull
- ipq807x_edma_configure_rings: successfull
- ipq807x_edma_hw_init: successfull
- board_eth_init: ipq807x_edma_init successed
- eth0
- ipq807x_eth_halt: done
- eth0 PHY0 Down Speed :10 Half duplex
- eth0 PHY1 up Speed :10 Full duplex
- eth0 PHY2 Down Speed :10 Half duplex
- eth0 PHY3 Down Speed :10 Half duplex
- eth0 PHY4 Down Speed :10 Half duplex
- eth0 PHY5 Down Speed :10 Half duplex
- ipq807x_eth_init: done
- BOOTP broadcast 1
- BOOTP broadcast 2
- BOOTP broadcast 3
- BOOTP broadcast 4
- BOOTP broadcast 5
- BOOTP broadcast 6
- BOOTP broadcast 7
- BOOTP broadcast 8
- BOOTP broadcast 9
- BOOTP broadcast 10
- BOOTP broadcast 11
- BOOTP broadcast 12
- BOOTP broadcast 13
- BOOTP broadcast 14
- BOOTP broadcast 15
- BOOTP broadcast 16
- BOOTP broadcast 17
- BOOTP broadcast 18
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147
- S - IMAGE_VARIANT_STRING=HAACANAAA
- S - OEM_IMAGE_VERSION_STRING=xiaoyang-gv
- S - Boot Config, 0x000002e5
- B - 203 - PBL, Start
- B - 2739 - bootable_media_detect_entry, Start
- B - 3446 - bootable_media_detect_success, Start
- B - 3451 - elf_loader_entry, Start
- B - 6117 - auth_hash_seg_entry, Start
- B - 6360 - auth_hash_seg_exit, Start
- B - 68556 - elf_segs_hash_verify_entry, Start
- B - 131256 - PBL, End
- B - 145088 - SBL1, Start
- B - 198646 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
- B - 205234 - pm_device_init, Start
- B - 328058 - PM_SET_VAL:Skip
- D - 122091 - pm_device_init, Delta
- B - 330345 - pm_driver_init, Start
- D - 5368 - pm_driver_init, Delta
- B - 336781 - clock_init, Start
- D - 2135 - clock_init, Delta
- B - 340837 - boot_flash_init, Start
- D - 11895 - boot_flash_init, Delta
- B - 356423 - boot_config_data_table_init, Start
- D - 3202 - boot_config_data_table_init, Delta - (575 Bytes)
- B - 363926 - Boot Setting : 0x00000600
- B - 367860 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:16
- B - 374814 - sbl1_ddr_set_params, Start
- B - 378627 - CPR configuration: 0x300
- B - 382104 - cpr_init, Start
- B - 384879 - Rail:0 Mode: 5 Voltage: 808000
- B - 390034 - CL CPR settled at 760000mV
- B - 392870 - Rail:1 Mode: 5 Voltage: 880000
- B - 397049 - Rail:1 Mode: 7 Voltage: 904000
- D - 16470 - cpr_init, Delta
- B - 403942 - Pre_DDR_clock_init, Start
- B - 407968 - Pre_DDR_clock_init, End
- B - 411353 - DDR Type : PCDDR3
- B - 416965 - do ddr sanity test, Start
- D - 1067 - do ddr sanity test, Delta
- B - 421815 - DDR: Start of HAL DDR Boot Training
- B - 426451 - DDR: End of HAL DDR Boot Training
- B - 432246 - DDR: Checksum to be stored on flash is 888519950
- B - 442463 - Image Load, Start
- D - 224114 - QSEE Image Loaded, Delta - (1373936 Bytes)
- B - 666669 - Image Load, Start
- D - 61 - SEC Image Loaded, Delta - (0 Bytes)
- B - 674324 - Image Load, Start
- D - 10736 - DEVCFG Image Loaded, Delta - (26004 Bytes)
- B - 685152 - Image Load, Start
- D - 25223 - RPM Image Loaded, Delta - (105964 Bytes)
- B - 710467 - Image Load, Start
- D - 96746 - APPSBL Image Loaded, Delta - (590292 Bytes)
- B - 807335 - QSEE Execution, Start
- D - 61 - QSEE Execution, Delta
- B - 813130 - USB D+ check, Start
- D - 0 - USB D+ check, Delta
- B - 819535 - SBL1, End
- D - 676765 - SBL1, Delta
- S - Flash Throughput, 6743 KB/s (2096771 Bytes, 310910 us)
- S - DDR Frequency, 466 MHz
- S - Core 0 Frequency, 800 MHz
- U-Boot 2016.01 (Jul 08 2021 - 07:16:48 +0000), Build: jenkins-common_router_openwrt_ota_publish-1455
- DRAM: smem ram ptable found: ver: 1 len: 4
- 512 MiB
- NAND: ONFI device found
- ID = 158061c8
- Vendor = c8
- Device = 61
- SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
- ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
- 128 MiB
- MMC: sdhci: Node Not found, skipping initialization
- ## Error: flags type check failure for "ethaddr" <= ""00:AA:BB:CC:DD:10"" (type: m)
- himport_r: can't insert "ethaddr="00:AA:BB:CC:DD:10"" into hash table
- PCI1 is not defined in the device tree
- In: serial@78B3000
- Out: serial@78B3000
- Err: serial@78B3000
- machid: 8010010
- MMC Device 0 not found
- eth5 MAC Address from ART is not valid
- write phy_id=1, reg(0x8074):0x0670
- write phy_id=2, reg(0x8074):0x0670
- write phy_id=3, reg(0x8074):0x0670
- write phy_id=4, reg(0x8074):0x0670
- bootwait is off, bootdelay=5
- Hit any key to stop autoboot: 0
- trigger button release!
- boot from rootfs 1
- miwifi: check crash in rmem !
- ubi0: attaching mtd1
- ubi0: scanning is finished
- ubi0: attached mtd1 (name "mtd=0", size 35 MiB)
- ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
- ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- ubi0: max/mean erase counter: 2/2, WL threshold: 4096, image sequence number: 763165774
- ubi0: available PEBs: 40, total reserved PEBs: 246, PEBs reserved for bad PEB handling: 20
- Read 0 bytes from volume kernel to 44000000
- No size specified -> Using max size (4317184)
- Could not find PCI in device tree
- ## Loading kernel from FIT Image at 44000000 ...
- Using 'config@ac04' configuration
- Trying 'kernel@1' kernel subimage
- Description: ARM64 OpenWrt Linux-4.4.60
- Type: Kernel Image
- Compression: gzip compressed
- Data Start: 0x440000e8
- Data Size: 3957925 Bytes = 3.8 MiB
- Architecture: AArch64
- OS: Linux
- Load Address: 0x41080000
- Entry Point: 0x41080000
- Hash algo: crc32
- Hash value: e3a16865
- Hash algo: sha1
- Hash value: 85c3e992e87196c9a4d558b0b3db00fe23bbf715
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Loading fdt from FIT Image at 44000000 ...
- Using 'config@ac04' configuration
- Trying 'fdt@ac04' fdt subimage
- Description: ARM64 OpenWrt qcom-ipq807x-hkxx device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x443da1c0
- Data Size: 79565 Bytes = 77.7 KiB
- Architecture: AArch64
- Hash algo: crc32
- Hash value: b4ed9ff8
- Hash algo: sha1
- Hash value: 6119388eb1ae982f4a3586f267c7ea804db115bb
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Booting using the fdt blob at 0x443da1c0
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 4a3e9000, end 4a3ff6cc ... OK
- Using machid 0x8010010 from environment
- Starting kernel ...
- Jumping to AARCH64 kernel via monitor
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.60 (jenkins@a09fbe6c5976) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 unknown) ) #0 SMP PREEMPT Fri Jul 10 05:56:17 2020
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] Ignoring memory range 0x40000000 - 0x41000000
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @ffffffc01ef5c000 s19096 r8192 d30056 u57344
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105840
- [ 0.000000] Kernel command line: ubi.mtd=rootfs_1 root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1
- [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.000000] software IO TLB [mem 0x5fe57000-0x5fe97000] (0MB) mapped at [ffffffc01ee57000-ffffffc01ee96fff]
- [ 0.000000] Memory: 402204K/430080K available (5491K kernel code, 654K rwdata, 2796K rodata, 224K init, 405K bss, 27876K reserved, 0K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
- [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
- [ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc0800000 ( 7 MB actual)
- [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
- [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc01f000000 ( 496 MB)
- [ 0.000000] .init : 0xffffffc00089a000 - 0xffffffc0008d2000 ( 224 KB)
- [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0008997f4 ( 8294 KB)
- [ 0.000000] .data : 0xffffffc0008e1000 - 0xffffffc000984800 ( 654 KB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000414] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000426] pid_max: default: 32768 minimum: 301
- [ 0.000515] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.000524] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.001057] Initializing cgroup subsys io
- [ 0.001073] Initializing cgroup subsys memory
- [ 0.001103] Initializing cgroup subsys devices
- [ 0.001117] Initializing cgroup subsys freezer
- [ 0.001128] Initializing cgroup subsys net_cls
- [ 0.001138] Initializing cgroup subsys pids
- [ 0.001389] EFI services will not be available.
- [ 0.001413] ASID allocator initialised with 65536 entries
- [ 0.051858] MSM Memory Dump base table set up
- [ 0.051882] MSM Memory Dump apps data table set up
- [ 0.090112] Detected VIPT I-cache on CPU1
- [ 0.090154] CPU1: Booted secondary processor [410fd034]
- [ 0.120098] Detected VIPT I-cache on CPU2
- [ 0.120125] CPU2: Booted secondary processor [410fd034]
- [ 0.150125] Detected VIPT I-cache on CPU3
- [ 0.150152] CPU3: Booted secondary processor [410fd034]
- [ 0.150204] Brought up 4 CPUs
- [ 0.150230] SMP: Total of 4 processors activated.
- [ 0.150240] CPU: All CPU(s) started at EL1
- [ 0.150263] alternatives: patching kernel code
- [ 0.167073] DMI not present or invalid.
- [ 0.167324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.167348] futex hash table entries: 1024 (order: 5, 131072 bytes)
- [ 0.167573] pinctrl core: initialized pinctrl subsystem
- [ 0.168514] NET: Registered protocol family 16
- [ 0.190054] cpuidle: using governor ladder
- [ 0.220070] cpuidle: using governor menu
- [ 0.220214] vdso: 2 pages (1 code @ ffffffc0008e9000, 1 data @ ffffffc0008e8000)
- [ 0.220354] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.220447] CPU: unavail, SoC Version: 2.0
- [ 0.220483] <CORE> glink_init: IPC Logging Disabled
- [ 0.220878] IPC logging disabled
- [ 0.220884] IPC logging disabled
- [ 0.220889] IPC logging disabled
- [ 0.220893] IPC logging disabled
- [ 0.220897] IPC logging disabled
- [ 0.223609] Soc version is not 1, changing clock offsets
- [ 0.234992] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
- [ 0.237027] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
- [ 0.239215] msm_rpm_dev_probe: APSS-RPM communication over GLINK
- [ 0.240146] sps:sps is ready.
- [ 0.249904] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 2
- [ 0.256438] pps_core: LinuxPPS API ver. 1 registered
- [ 0.256450] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.256476] PTP clock support registered
- [ 0.256628] dmi: Firmware registration failed.
- [ 0.257954] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.258595] clocksource: Switched to clocksource arch_sys_counter
- [ 0.261848] NET: Registered protocol family 2
- [ 0.262438] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.262498] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
- [ 0.262595] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.262649] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.262672] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.262842] NET: Registered protocol family 1
- [ 0.270463] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.270482] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.273727] io scheduler noop registered
- [ 0.273744] io scheduler deadline registered (default)
- [ 0.275875] 20000000.pci supply vdda not found, using dummy regulator
- [ 0.275955] 20000000.pci supply vdda_phy not found, using dummy regulator
- [ 0.275990] 20000000.pci supply vdda_refclk not found, using dummy regulator
- [ 0.276536] PCI host bridge /soc/pci@20000000 ranges:
- [ 0.276563] IO 0x20200000..0x202fffff -> 0x20200000
- [ 0.276577] MEM 0x20300000..0x20ffffff -> 0x20300000
- [ 1.308642] qcom-pcie 20000000.pci: phy link never came up
- [ 1.310186] qcom-pcie 20000000.pci: hostinit failed
- [ 1.310195] qcom-pcie 20000000.pci: cannot initialize host
- [ 1.310340] qcom-pcie: probe of 20000000.pci failed with error -110
- [ 1.315748] NET: Registered protocol family 27
- [ 1.315760] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
- [ 1.315772] qmi_log_init: IPC Logging disabled
- [ 1.315778] qmi_log_init: IPC Logging disabled
- [ 1.315869] msm_rpm_log_probe: OK
- [ 1.316447] msm-dcc b3000.dcc: DCC XPU is not specified
- [ 1.316690] msm-dcc b3000.dcc: DCC SRAM dump setup failed
- [ 1.316713] msm-dcc b3000.dcc: jiffies_64: 0xffff8b52, cntvct_64: 0x6598597
- [ 1.316725] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff80003cc004)
- [ 1.316735] msm-dcc b3000.dcc: gcnt_lo: 0x0659874b(0xffffff80003cc000)
- [ 1.317284] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
- [ 1.317951] msm_serial 78b3000.serial: msm_serial: detected port #0
- [ 1.317986] msm_serial 78b3000.serial: uartclk = 3686400
- [ 1.318020] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM
- [ 1.318038] msm_serial: console setup on port #0
- [ 2.053814] console [ttyMSM0] enabled
- [ 2.058777] msm_serial 78b1000.serial: msm_serial: detected port #1
- [ 2.062044] msm_serial 78b1000.serial: uartclk = 19200000
- [ 2.068116] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM
- [ 2.073978] msm_serial: driver initialized
- [ 2.082458] msm_serial_hsl_init: driver initialized
- [ 2.095171] brd: module loaded
- [ 2.095853] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 2.098566] m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
- [ 2.105450] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61
- [ 2.110696] nand: GigaDevice PSR1GA30DT
- [ 2.117165] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 2.120845] 16 ofpart partitions found on MTD device qcom_nand.0
- [ 2.128366] Creating 16 MTD partitions on "qcom_nand.0":
- [ 2.134545] 0x000000000000-0x000000100000 : "0:SBL1"
- [ 2.141500] 0x000000100000-0x000000200000 : "0:MIBIB"
- [ 2.146301] 0x000000200000-0x000000500000 : "0:QSEE"
- [ 2.153064] 0x000000500000-0x000000580000 : "0:DEVCFG"
- [ 2.155823] 0x000000580000-0x000000600000 : "0:RPM"
- [ 2.160793] 0x000000600000-0x000000680000 : "0:CDT"
- [ 2.165555] 0x000000680000-0x000000700000 : "0:APPSBLENV"
- [ 2.170422] 0x000000700000-0x000000800000 : "0:APPSBL"
- [ 2.176405] 0x000000800000-0x000000880000 : "0:ART"
- [ 2.181051] 0x000000880000-0x000000900000 : "bdata"
- [ 2.185769] 0x000000900000-0x000000980000 : "crash"
- [ 2.190626] 0x000000980000-0x000000a00000 : "crash_syslog"
- [ 2.195474] 0x000000a00000-0x000002dc0000 : "rootfs"
- [ 2.232447] mtd: device 12 (rootfs) set to be root filesystem
- [ 2.232773] mtdsplit: no squashfs found in "rootfs"
- [ 2.237176] 0x000002dc0000-0x000005180000 : "rootfs_1"
- [ 2.274335] 0x000005180000-0x000007040000 : "overlay"
- [ 2.302114] 0x000007040000-0x0000070c0000 : "rsvd0"
- [ 2.303714] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
- [ 2.308694] libphy: Fixed MDIO Bus: probed
- [ 2.531992] qca-mdio 90000.mdio: Could not find phy-reset-gpio
- [ 2.532102] libphy: qca_mdio: probed
- [ 2.537930] qca-mdio 90000.mdio: qca-mdio driver was registered
- [ 2.540668] Unable to create IPC log context!
- [ 2.546384] cnss: Platform driver probed successfully.
- [ 2.550853] Skip QCA8074V1 in V2 platform
- [ 2.555735] cnss_genl: genl_register_family fail: -17
- [ 2.559760] cnss: CNSS genl init failed -17
- [ 2.564743] cnss: Platform driver probed successfully.
- [ 2.568925] i2c /dev entries driver
- [ 2.580519] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
- [ 2.580972] sdhci: Secure Digital Host Controller Interface driver
- [ 2.588015] sdhci: Copyright(c) Pierre Ossman
- [ 2.594033] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.599120] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
- [ 2.604220] ICE IRQ = 81
- [ 2.612756]
- [ 2.612756] Version Rollback Feature Disabled
- [ 2.615683] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000008b04000
- [ 2.620681] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000008b04000
- [ 2.637934] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000008b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000008b04000
- [ 2.653831] sps:BAM 0x0000000008b04000 is registered.[ 2.661572] DEV CI test message
- [ 2.666266] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group
- [ 2.669035] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group
- [ 2.679513] remoteproc remoteproc0: q6v5-m3 is available
- [ 2.689940] SPMI VADC - Min ch: 0 Max ch: 15
- [ 2.696722] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
- [ 2.699406] coresight-csr 6001000.csr: CSR initialized
- [ 2.706825] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
- [ 2.711802] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
- [ 2.719341] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
- [ 2.726703] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
- [ 2.734097] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
- [ 2.741489] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
- [ 2.748854] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
- [ 2.756217] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
- [ 2.763612] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
- [ 2.770993] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
- [ 2.778355] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
- [ 2.785752] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
- [ 2.793123] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
- [ 2.800509] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
- [ 2.807872] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
- [ 2.815260] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
- [ 2.822640] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
- [ 2.830181] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
- [ 2.837503] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000
- [ 2.844933] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000
- [ 2.852349] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
- [ 2.859730] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006044000
- [ 2.866756] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006044000
- [ 2.883865] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006044000
- [ 2.899751] sps:BAM 0x0000000006044000 is registered.[ 2.907380] coresight-tmc 6028000.tmc: TMC initialized
- [ 2.912188] coresight-tmc 6027000.tmc: TMC initialized
- [ 2.917316] coresight-funnel 6021000.funnel: FUNNEL initialized
- [ 2.922379] coresight-funnel 6100000.funnel: FUNNEL initialized
- [ 2.928177] coresight-funnel 6120000.funnel: FUNNEL initialized
- [ 2.934100] coresight-funnel 61a1000.funnel: FUNNEL initialized
- [ 2.940525] coresight-etm4x 619c000.etm: ETM 4.0 initialized
- [ 2.946212] coresight-etm4x 619d000.etm: ETM 4.0 initialized
- [ 2.952158] coresight-etm4x 619e000.etm: ETM 4.0 initialized
- [ 2.957825] coresight-etm4x 619f000.etm: ETM 4.0 initialized
- [ 2.963113] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
- [ 2.968855] coresight-stm 6002000.stm: STM initialized
- [ 2.977369] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
- [ 2.981281] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
- [ 2.991643] Netfilter messages via NETLINK v0.30.
- [ 2.996481] ip_set: protocol 6
- [ 3.001761] NET: Registered protocol family 10
- [ 3.004782] NET: Registered protocol family 17
- [ 3.008454] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 3.012905] Bridge firewalling registered
- [ 3.025616] 8021q: 802.1Q VLAN Support v1.8
- [ 3.030989] <CORE> glink_core_register_transport: IPC Logging disabled
- [ 3.033619] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 2
- [ 3.040129] msm_glink_smem_native_xprt rx fifo not found
- [ 3.047455] pmd9655_s3: supplied by e-smps1-reg
- [ 3.053067] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
- [ 3.057116] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
- [ 3.063730] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
- [ 3.071379] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
- [ 3.078881] cpr3_mem_acc_init: apc: not using memory accelerator regulator
- [ 3.088020] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
- [ 3.094980] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV
- [ 3.105010] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 720, quot_offset[ 7]= 0
- [ 3.114776] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 934, quot_offset[ 7]= 210
- [ 3.125723] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
- [ 3.137832] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz
- [ 3.143437] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz
- [ 3.150702] DEV CI test message
- [ 3.159531] remoteproc remoteproc1: q6v5-wcss is available
- [ 3.162267] ubi0: attaching mtd13
- [ 3.351670] ubi0: scanning is finished
- [ 3.358357] ubi0: attached mtd13 (name "rootfs_1", size 35 MiB)
- [ 3.358378] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 3.363084] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 3.370024] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 3.376874] ubi0: good PEBs: 286, bad PEBs: 0, corrupted PEBs: 0
- [ 3.383650] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 3.389903] ubi0: max/mean erase counter: 2/2, WL threshold: 4096, image sequence number: 763165774
- [ 3.396932] ubi0: available PEBs: 40, total reserved PEBs: 246, PEBs reserved for bad PEB handling: 20
- [ 3.405885] ubi0: background thread "ubi_bgt0d" started, PID 118
- [ 3.415966] hctosys: unable to open rtc device (rtc0)
- [ 3.446493] crash_kernel_init, res rsvd1, 50700000, 400000, /reserved-memory/rsvd1@50700000
- [ 3.446527] mtd dev crash, size 0x80000
- [ 3.454408] crash_kernel_init, crash init, res->start:50700000,crash_buf:0xffffff8001c80000,crash_buf_len 0x7ffe4, crash_avail_sz 0x80000
- [ 3.458082] Crash kernel dumper registered ok!
- [ 3.470783] crash_syslog_init, res rsvd2, 50b00000, 400000, /reserved-memory/rsvd2@50b00000
- [ 3.475263] mtd dev crash_syslog, size 0x80000
- [ 3.484404] crash_syslog_init, crash init, crash_buf_len 0x3ffe4, crash_avail_sz 0x40000
- [ 3.488555] Crash syslog dumper register ok!
- [ 3.497003] pmd9655_ldo11: disabling
- [ 3.501726] ALSA device list:
- [ 3.504938] No soundcards found.
- [ 3.510131] VFS: Mounted root (squashfs filesystem) readonly on device 31:17.
- [ 3.511245] Freeing unused kernel memory: 224K (ffffffc00089a000 - ffffffc0008d2000)
- [ 3.518335] Freeing alternatives memory: 44K (ffffffc0008d2000 - ffffffc0008dd000)
- [ 3.865769] init: Console is alive
- [ 3.865887] init: - watchdog -
- [ 3.988380] random: nonblocking pool is initialized
- [ 4.980118] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 4.995660] usbcore: registered new interface driver usbfs
- [ 4.995712] usbcore: registered new interface driver hub
- [ 5.000151] usbcore: registered new device driver usb
- [ 5.006881] Button Hotplug driver version 0.4.1
- [ 5.012992] SCSI subsystem initialized
- [ 5.016688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 5.019106] ehci-platform: EHCI generic platform driver
- [ 5.247918] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.247958] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 5.252503] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
- [ 5.259892] xhci-hcd xhci-hcd.0.auto: irq 189, io mem 0x08a00000
- [ 5.268918] hub 1-0:1.0: USB hub found
- [ 5.274786] hub 1-0:1.0: 1 port detected
- [ 5.278524] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.282450] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 5.287749] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.295566] hub 2-0:1.0: USB hub found
- [ 5.303610] hub 2-0:1.0: 1 port detected
- [ 5.309901] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 5.318370] init: - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 8.674447] mount_root: mounting /dev/root
- [ 8.725111] ubi1: attaching mtd14
- [ 8.885665] ubi1: scanning is finished
- [ 8.908410] ubi1: attached mtd14 (name "overlay", size 30 MiB)
- [ 8.908439] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 8.913167] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 8.919998] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 8.926846] ubi1: good PEBs: 246, bad PEBs: 0, corrupted PEBs: 0
- [ 8.933625] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 8.939879] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1529827289
- [ 8.946905] ubi1: available PEBs: 0, total reserved PEBs: 246, PEBs reserved for bad PEB handling: 20
- [ 8.956209] ubi1: background thread "ubi_bgt1d" started, PID 189
- UBI device number 1, total 246 LEBs (31236096 bytes, 29.7 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
- [ 8.980583] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 200
- ubimkvol: error!: UBI device does not have free logical eraseblocks
- [ 9.018130] UBIFS (ubi1:0): recovery needed
- [ 9.108355] UBIFS (ubi1:0): recovery completed
- [ 9.108420] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data"
- [ 9.111725] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 9.118922] UBIFS (ubi1:0): FS size: 26918912 bytes (25 MiB, 212 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
- [ 9.128885] UBIFS (ubi1:0): reserved for root: 1271446 bytes (1241 KiB)
- [ 9.139123] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 5960C5ED-58F3-4E96-BB9F-79A3D171AD3C, small LPT model
- 2116+0 records in
- 2116+0 records out
- 2116 bytes (2.1KB) copied, 0.006182 seconds, 334.3KB/s
- 131072+0 records in
- [ 9.517715] urandom-seed: Seed file not found (/etc/urandom.seed)
- 131072+0 records out
- 131072 bytes (128.0KB) copied, 0.337141 seconds, 379.7KB/s
- start do data_mount_fail_recover
- [ 10.019136] procd: - early -
- [ 10.019184] procd: - watchdog -
- [ 10.620398] procd: - watchdog -
- [ 10.620520] procd: - ubus -
- [ 10.672726] procd: - init -
- Please press Enter to activate this console.
- /etc/rc.d/S00sysfixtime: Fri Jul 10 06:42:04 UTC 2020
- /etc/rc.d/S00wifi_fw_mount: 2116+0 records in
- /etc/rc.d/S00wifi_fw_mount: 2116+0 records out
- /etc/rc.d/S00wifi_fw_mount: 2116 bytes (2.1KB) copied, 0.006246 seconds, 330.8KB/s
- /etc/rc.d/S00wifi_fw_mount: 131072+0 records in
- /etc/rc.d/S00wifi_fw_mount: 131072+0 records out
- /etc/rc.d/S00wifi_fw_mount: 131072 bytes (128.0KB) copied, 0.346342 seconds, 369.6KB/s
- /etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/mem failed: Resource busy
- /etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/net_cls failed: Resource busy
- /etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/cpu failed: Resource busy
- /etc/rc.d/S09qca-iot: sh: write error: Invalid argument
- /etc/rc.d/S09qca-iot: /etc/rc.common: line 154: can't create /sys/class/gpio/gpio/direction: nonexistent directory
- /etc/rc.d/S09qca-iot: /etc/rc.common: line 154: can't create /sys/class/gpio/gpio/value: nonexistent directory
- /etc/rc.d/S09qca-iot: /etc/rc.common: line 154: can't create /sys/class/gpio/gpio/value: nonexistent directory
- /usr/bin/iotd[311]: Started iot daemon
- [ 11.237845] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 11.850235] nf_conntrack version 0.5.0 (3144 buckets, 40000 max)
- [ 11.850264] xqnss: extend init success!
- [ 11.862505] cfg80211: World regulatory domain updated:
- [ 11.862530] cfg80211: DFS Master region: unset
- [ 11.866527] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 11.871206] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 11.880724] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 11.888502] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 11.898192] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 11.905937] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 11.915600] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 11.925052] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 11.933145] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 12.021440] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1
- [ 12.025148] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist!
- [ 12.032087] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus
- [ 12.038215] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000
- [ 12.045334] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000
- [ 12.052678] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0
- [ 12.059053] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xff
- [ 12.064602] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xff
- [ 12.070390] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist!
- [ 12.076168] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC 64:64:4a:XXXXXXXX
- [ 12.081994] ssdk_dt_parse_intf_mac[683]:INFO:dp2 MAC 64:64:4a:XXXXXXXX
- [ 12.088497] ssdk_dt_parse_intf_mac[683]:INFO:dp3 MAC 64:64:4a:XXXXXXXX
- [ 12.095009] ssdk_dt_parse_intf_mac[683]:INFO:dp4 MAC 64:64:4a:XXXXXXXX
- [ 12.101525] ssdk_dt_parse_intf_mac[683]:INFO:dp5 MAC 64:64:4a:XXXXXXXX
- [ 12.108047] ssdk_plat_init start
- [ 12.190691] ssdk_ppe_clock_init[464]:INFO:ppe and uniphy clock init successfully!
- [ 12.193854] ssdk_probe[1884]:INFO:ess_rst doesn't exist!
- [ 12.201092] HPPE initializing...
- [ 12.202424] malibu_phy_api_ops_init[2851]:INFO:qca probe malibu phy driver succeeded!
- [ 12.213520] regi_init[3411]:INFO:Initializing HPPE!!
- [ 12.428601] ssdk_ppe_reset_init[738]:INFO:ppe reset successfully!
- [ 12.435905] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96
- [ 12.439188] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing
- [ 12.654706] ssdk_switch_register[1623]:INFO:Chip version 0x1500
- [ 12.657686] qca_link_polling_select[1285]:INFO:link-polling-required node does not exist
- [ 12.663926] ssdk_switch_register[1648]:INFO:polling is selected
- [ 12.671656] regi_init[3415]:INFO:Initializing HPPE Done!!
- [ 12.676581] regi_init[3459]:INFO:qca-ssdk module init succeeded!
- [ 12.684117] tun: Universal TUN/TAP device driver, 1.6
- [ 12.685024] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 12.692832] EDMA ver 1 hw init
- [ 12.696268] EDMA HW Reset completed succesfully
- [ 12.699142] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
- [ 12.703514] RxDesc:1 (15-15) RxFill:1 (7-7)
- [ 12.712962] **********************************************************
- [ 12.712989] * NSS Data Plane driver
- [ 12.719508] **********************************************************
- [ 12.726408] l2tp_core: L2TP core driver, V2.0
- [ 12.730193] l2tp_netlink: L2TP netlink interface
- [ 12.886541] nss_driver - fw of size 667888 bytes copied to load addr: 40000000, nss_id : 0
- [ 12.888265] Supported Frequencies -
- [ 12.895935] 187.2 MHz 748.8 MHz
- [ 12.899683] 1.4976 GHz [ 12.900626]
- [ 12.903123] ffffffbffc62c680: meminfo init succeed
- [ 12.953553] node size 2 # items 4
- [ 12.953580] memory: 40000000 536870912 (avl 435597312) items 4 active_cores 2
- [ 12.955860] ffffffbffc62c680: nss core 0 booted successfully
- [ 12.970382] nss_driver - fw of size 265296 bytes copied to load addr: 40800000, nss_id : 1
- [ 12.971457] Supported Frequencies -
- [ 12.977532] 187.2 MHz 748.8 MHz
- [ 12.983517] 1.4976 GHz [ 12.984473]
- [ 12.986993] ffffffbffc633780: meminfo init succeed
- [ 12.990649] sit: IPv6 over IPv4 tunneling driver
- [ 12.992982] node size 2 # items 4
- [ 12.994505] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
- [ 12.994984] gre: GRE over IPv4 demultiplexor driver
- [ 12.995543] ip_gre: GRE over IPv4 tunneling driver
- [ 12.997093] ip6_gre: GRE over IPv6 tunneling driver
- [ 12.999966] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 13.022946] memory: 40000000 536870912 (avl 435638272) items 4 active_cores 2
- [ 13.029551] ffffffbffc633780: nss core 1 booted successfully
- [ 13.038473] QCA multicast snooping installed successfully
- [ 13.044837] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 14.840757] QCA Hy-Fi multicast installation successfully
- [ 15.519140] nss_lag_init[354]:LAG Manager Installed
- [ 16.070238] PPP generic driver version 2.4.2
- [ 16.070868] NET: Registered protocol family 24
- [ 16.399990] <NSS-CRYPTO>:module loaded Build_ID - 07/10/20, 06:31:48 SoC=ipq807x_64
- [ 16.630617] cannot find nss-macsec0 node
- [ 16.630677] cannot find nss-macsec1 node
- [ 16.633625] cannot find nss-macsec2 node
- [ 16.637502] nss_macsec init success
- [ 17.022046] diag: IPC Logging disabled
- [ 19.529224] u32 classifier
- [ 19.529244] input device check on
- [ 19.530813] Actions configured
- [ 19.989198] Mirror/redirect action on
- [ 25.079750] ipaccount: ifname [lo] event[5]
- [ 25.079777] ipaccount: ifname [miireg] event[5]
- [ 25.082733] ipaccount: ifname [eth0] event[5]
- [ 25.087253] ipaccount: ifname [eth1] event[5]
- [ 25.091790] ipaccount: ifname [eth2] event[5]
- [ 25.096099] ipaccount: ifname [eth3] event[5]
- [ 25.100450] ipaccount: ifname [eth4] event[5]
- [ 25.104780] ipaccount: ifname [ip6tnl0] event[5]
- [ 25.109127] ipaccount: ifname [sit0] event[5]
- [ 25.113809] ipaccount: ifname [gre0] event[5]
- [ 25.118062] ipaccount: ifname [gretap0] event[5]
- [ 25.122412] ipaccount: ifname [ip6gre0] event[5]
- [ 25.127090] ipaccount: ifname [bond0] event[5]
- [ 25.131704] ipaccount: ifname [teql0] event[5]
- [ 25.331020] fuse init (API version 7.23)
- [ 25.561937] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 25.564400] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 25.813364] PPP MPPE Compression module registered
- [ 25.814391] PPTP driver version 0.8.5
- [ 25.821222] ipt: xt_cgroup_MARK installed ok.
- [ 25.832038] xt_time: kernel timezone is -0000
- [ 25.841739] kmodloader: done loading kernel modules from /etc/modules.d/*
- /etc/rc.d/S10boot: cp: omitting directory '/cfg/default/internal'
- /etc/rc.d/S10boot: cat: can't open '/etc/config/wireless': No such file or directory
- [ 29.039769] mem_manager: module license 'unspecified' taints kernel.
- [ 29.039798] Disabling lock debugging due to kernel taint
- [ 29.046228] __mm_init_module
- [ 29.069837] qdf_dbg_mask value is invalid
- [ 29.069860] Using the default module debug levels instead
- [ 29.072823] qdf_print_ctrl_register: Allocated print control object 0
- [ 29.078261]
- MINIDUMP VA .bss start=ffffffbffcd28f00 module=qdf
- [ 29.534387] wlan: [1372:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
- [ 29.534481]
- MINIDUMP VA .bss start=ffffffbffcfb8a80 module=umacINFO: Cold boot calibration not applicable: ap-ac04
- [ 29.699320]
- [ 29.699320] MINIDUMP VA .bss start=ffffffbffd244900 module=qca_ol=======ol_if_register_wifi3_0==========
- [ 29.711874] wlan: [1384:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:ffffffbffd3788b8
- [ 29.714515] remoteproc remoteproc0: powering up q6v5-m3
- [ 29.742476] remoteproc remoteproc0: Booting fw image IPQ8074/m3_fw.mdt, size 284
- [ 29.742509] Sanity check passed for M3 image
- [ 29.795836] remoteproc remoteproc0: remote processor q6v5-m3 is now up
- [ 29.796028] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done
- [ 29.801277] wlan: [1384:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2
- [ 29.806733] remoteproc remoteproc1: powering up q6v5-wcss
- [ 29.814203] remoteproc remoteproc1: Booting fw image IPQ8074/q6_fw.mdt, size 668
- [ 29.819714] Sanity check passed for the image
- [ 30.917731] glink_core_link_up glink is up
- [ 30.917896] glink_xprt_open_event
- [ 30.918072] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
- [ 30.924170] Subsystem error monitoring/handling services are up
- [ 30.930602] remoteproc remoteproc1: remote processor q6v5-wcss is now up
- [ 30.931051] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, ffffffbffc916248
- [ 30.943358] wlan: [1384:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3
- [ 46.153414] wlan: [1384:I:ANY] ol_ath_ahb_probe: 504: Error: QMI FW ready timeout 15 seconds
- [ 46.153445] qmi_history_index [127]
- [ 46.160927] Assertion failed! 0:ol_ath_ahb_probe /home/jenkins/romdaily_new_openwrt/system/build_dir/target-aarch64-openwrt-linux_musl/linux-ipq807x_64_MiWiFi/qca-wifi-miwifi_git-unified-profile/qca-wifi-miwifi_git/os/linux/../../qca_ol/../offload/os/linux/ath_ahb.c:506
- [ 46.165860] CPU: 0 PID: 1384 Comm: insmod Tainted: P 4.4.60 #0
- [ 46.188081] Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-AC04 (DT)
- [ 46.195287] Call trace:
- [ 46.202056] [<ffffffc000087b78>] dump_backtrace+0x0/0x128
- [ 46.204486] [<ffffffc000087cb4>] show_stack+0x14/0x1c
- [ 46.210044] [<ffffffc00027c1c0>] dump_stack+0x94/0xb4
- [ 46.215429] [<ffffffbffd1b3300>] ol_ath_ahb_probe+0xd0/0x508 [qca_ol]
- [ 46.220433] [<ffffffbffd1b38e4>] ol_ath_ahb_ssr+0x1ac/0x6f8 [qca_ol]
- [ 46.226842] [<ffffffbffd1b4354>] ol_ath_pld_probe+0x1c/0x38 [qca_ol]
- [ 46.233264] [<ffffffbffd178bb4>] pld_pcie_device_self_recovery+0x23c/0x268 [qca_ol]
- [ 46.239302] [<ffffffc0003a4b1c>] cnss_qca8074_notifier_nb+0x28/0x7c
- [ 46.246677] [<ffffffc0000abf30>] notifier_call_chain+0x50/0x84
- [ 46.252925] [<ffffffc0000ac410>] __srcu_notifier_call_chain+0x80/0xac
- [ 46.258829] [<ffffffc0000ac450>] srcu_notifier_call_chain+0x14/0x1c
- [ 46.265341] [<ffffffc000305a40>] subsys_notif_queue_notification+0x38/0x4c
- [ 46.271416] [<ffffffc00030706c>] notify_each_subsys_device.isra.6+0xa4/0xc0
- [ 46.278360] [<ffffffc000307b78>] __subsystem_get+0x148/0x1a0
- [ 46.285216] [<ffffffc000307be0>] subsystem_get+0x10/0x18
- [ 46.291119] [<ffffffc0003a6ad8>] cnss_wlan_register_driver+0x9c/0x158
- [ 46.296718] [<ffffffbffd178c20>] pld_ahb_register_driver+0x10/0x20 [qca_ol]
- [ 46.303054] [<ffffffbffd177504>] pld_register_driver+0x8c/0x148 [qca_ol]
- [ 46.309828] [<ffffffbffd1b4310>] pld_module_init+0x10/0x20 [qca_ol]
- [ 46.316629] [<ffffffbffd354468>] init_ath_ahb_3_0+0x50/0xf0 [wifi_3_0]
- [ 46.322610] [<ffffffbffd398014>] init_module+0x14/0x168 [wifi_3_0]
- [ 46.329054] [<ffffffc000082218>] do_one_initcall+0x19c/0x1b8
- [ 46.335218] [<ffffffc000108f28>] do_init_module+0x58/0x19c
- [ 46.341033] [<ffffffc0000ef2a0>] load_module+0x1660/0x1adc
- [ 46.346325] [<ffffffc0000ef85c>] SyS_init_module+0x140/0x16c
- [ 46.351797] [<ffffffc0000855b0>] el0_svc_naked+0x24/0x28
- [ 46.358546] QDF BUG in ol_ath_ahb_probe Line 506: Failed assertion '0'
- [ 46.362977] ------------[ cut here ]------------
- [ 46.369241] kernel BUG at /home/jenkins/romdaily_new_openwrt/system/build_dir/target-aarch64-openwrt-linux_musl/linux-ipq807x_64_MiWiFi/qca-wifi-miwifi_git-unified-profile/qca-wifi-miwifi_git/os/linux/../../qca_ol/../cmn_dev/qdf/linux/src/i_qdf_trace.h:278!
- [ 46.374438] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
- [ 46.396672] Modules linked in: wifi_3_0(+) qca_ol qca_spectral umac asf(P) qdf mem_manager(P) iptable_nat ip6table_nat nf_nat_pptp nf_nat_ipv6 nf_nat_ipv4 nf_conntrack_pptp nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_MASQUERADE xt_u32 xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_flowMARK xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_cgroup_MARK xt_bpf xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG xt_IP4MARK xt_HL xt_DSCP xt_CLASSIFY ts_fsm ts_bm pptp ppp_mppe ppp_async nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda l2tp_ppp iptable_mangle iptable_filter ipt_REJECT ipt_ECN ip_tables compat_xtables fuse ip_account sch_teql sch_tbf sch_sfq sch_red sch_prio sch_pie sch_htb sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_ipset em_cmp cls_basic act_police act_ipt act_connmark act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress qca_nss_cfi_ocf qca_nss_tunipip6 qca_nss_tun6rd qca_nss_cfi_cryptoapi diagchar crc_ccitt usb_f_diag qca_nss_macsec qca_nss_crypto qca_nss_pppoe pppoe pppox ppp_generic slhc qca_nss_map_t qca_nss_lag_mgr qca_nss_bridge_mgr qca_nss_vlan hyfi_bridging nf_nat_proto_sctp libcrc32c libcomposite nf_conntrack_proto_sctp xt_set ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat ip6t_rt ip6t_frag ip6t_hbh ip6t_eui64 ip6t_mh ip6t_ah ip6t_ipv6header ip6t_REJECT nf_log_ipv6 ip6table_mangle ip6table_filter ip6_tables x_tables qca_mcs hyfi_qdisc bonding ip6_gre ip_gre gre nat46 sit qca_nss_drv l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel ip6_tunnel qca_nss_dp tunnel6 tunnel4 ip_tunnel tun qca_ssdk gpio_button_hotplug cfg80211 nls_iso8859_1 nls_cp437 shortcut_fe_drv shortcut_fe_ipv6 shortcut_fe nf_conntrack sha1_generic cryptosoft cryptodev ocf md5 ecb des_generic cbc authenc leds_gpio bootconfig xhci_plat_hcd xhci_pci xhci_hcd dwc3 udc_core dwc3_of_simple dbm ahci libahci libata ehci_platform ehci_hcd sd_mod scsi_mod button_hotplug input_core usbcore usb_common
- [ 46.615415] CPU: 0 PID: 1384 Comm: insmod Tainted: P 4.4.60 #0
- [ 46.615686] Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-AC04 (DT)
- [ 46.622806] task: ffffffc01884a100 ti: ffffffc01884a100 task.ti: ffffffc01884a100
- [ 46.629928] PC is at ol_ath_ahb_probe+0xe0/0x508 [qca_ol]
- [ 46.637523] LR is at ol_ath_ahb_probe+0xe0/0x508 [qca_ol]
- [ 46.642593] pc : [<ffffffbffd1b3310>] lr : [<ffffffbffd1b3310>] pstate: 60000145
- [ 46.647978] sp : ffffffc0174f7810
- [ 46.655435] x29: ffffffc0174f7820 x28: 0000000000000124
- [ 46.663760] x27: 0000000000000019 x26: 0000000000000000
- [ 46.669057] x25: 0000000000000000 x24: ffffffc00063d7e8
- [ 46.674351] x23: ffffffc01d674c00 x22: ffffffc00063d7e8
- [ 46.679646] x21: ffffffc01d674c10 x20: 0000000000000000
- [ 46.684942] x19: ffffffbffd1f1e98 x18: 00000000eaa2a697
- [ 46.690237] x17: 00000000c1ec15be x16: 00000000a6c66259
- [ 46.695531] x15: 0000000075c1226a x14: 0ffffffffffffffe
- [ 46.700828] x13: 0000000000000000 x12: 0101010101010101
- [ 46.706123] x11: 7f7f7f7f7f7f7f7f x10: fefefefefefefeff
- [ 46.711418] x9 : 7f7f7f7f7f7f7f7f x8 : 64656c696146203a
- [ 46.716712] x7 : 36303520656e694c x6 : ffffffc00098a389
- [ 46.722007] x5 : ffffffc000614d38 x4 : 0000000000000000
- [ 46.727303] x3 : 0000000000000000 x2 : ffffffc01884a100
- [ 46.732598] x1 : ffffffc01884a100 x0 : 000000000000003a
- [ 46.737893]
- [ 46.738071] Process insmod (pid: 1384, stack limit = 0xffffffc0174f4000)
- [ 46.739645] Stack: (0xffffffc0174f7810 to 0xffffffc0174f8000)
- [ 46.746327] 7800: 0000000000000000 ffffffc01884a100
- [ 46.751974] 7820: ffffffc0174f78d0 ffffffbffd1b38e4 ffffffbffd24c2f4 ffffffbffd1f1e10
- [ 46.759787] 7840: ffffffc01d674c00 ffffffc00063d7e8 ffffffbffd1f1ed8 ffffffc00063d7e8
- [ 46.767599] 7860: 0000000000000000 0000000000000000 0000000000000019 0000000000000124
- [ 46.775411] 7880: ffffffc0174f7890 ffffffbffd1d65f8 ffffffc0174f78a0 ffffffbffd1b2728
- [ 46.783223] 78a0: ffffffc0174f78d0 ffffffbffd1b3794 0000000000000003 0000000000000000
- [ 46.791036] 78c0: 0000000000000000 0000000000000000 ffffffc0174f7940 ffffffbffd1b4354
- [ 46.798848] 78e0: ffffffc017599b00 ffffffc01d674c00 ffffffc01d674c10 ffffffc00063d7e8
- [ 46.806661] 7900: 0000000000000000 00000000ffffffff 0000000000000000 0000000000000000
- [ 46.814473] 7920: ffffffc017599b00 ffffffc01d674c00 ffffffc01d674c10 ffffffc00063d7e8
- [ 46.822285] 7940: ffffffc0174f7950 ffffffbffd178bb4 ffffffc0174f7980 ffffffc0003a4b1c
- [ 46.830098] 7960: ffffffc01d359018 ffffffbffd23de40 0000000000000003 ffffffc0174f7a98
- [ 46.837911] 7980: ffffffc0174f79a0 ffffffc0000abf30 00000000fffffffe 0000000000000000
- [ 46.845723] 79a0: ffffffc0174f79e0 ffffffc0000ac410 ffffffc01884a100 ffffffc01d0a0260
- [ 46.853535] 79c0: ffffffc01d0a0238 0000000000000003 ffffffc0174f7a98 ffffffc0008182c9
- [ 46.861348] 79e0: ffffffc0174f7a30 ffffffc0000ac450 0000000000000000 0000000000000003
- [ 46.869160] 7a00: ffffffc0009be000 0000000000000001 ffffffc0174f7af8 ffffffc0008182c9
- [ 46.876973] 7a20: ffffffc0184f2000 0000000000000000 ffffffc0174f7a40 ffffffc000305a40
- [ 46.884785] 7a40: ffffffc0174f7a50 ffffffc00030706c ffffffc0174f7ab0 ffffffc000307b78
- [ 46.892598] 7a60: ffffffc01cd01000 ffffffc01d2c7800 ffffffc01d337338 ffffffc0174f7af8
- [ 46.900410] 7a80: 0000000000000000 ffffffc000307b58 ffffffc01cd01000 000000001d2c7800
- [ 46.908223] 7aa0: ffffff0000000000 ffffffc01d664400 ffffffc0174f7b00 ffffffc000307be0
- [ 46.916036] 7ac0: ffffffc01d359018 0000000000000001 ffffffc0009bfd10 ffffffbffd23de40
- [ 46.923848] 7ae0: ffffffc0008182d1 ffffffc0003a68cc ffffffc0174f7b10 ffffffc01cd01000
- [ 46.931661] 7b00: ffffffc0174f7b10 ffffffc0003a6ad8 ffffffc0174f7b60 ffffffbffd178c20
- [ 46.939473] 7b20: ffffffc017599b00 ffffffbffd359480 ffffffc0009bfd40 ffffffc0175aec80
- [ 46.947286] 7b40: ffffffc0008f12a0 0000000000000000 ffffffc0184f2000 ffffffc0174f7ba0
- [ 46.955098] 7b60: ffffffc0174f7b70 ffffffbffd177504 ffffffc0174f7ba0 ffffffbffd1b4310
- [ 46.962910] 7b80: ffffffbffd398000 ffffffbffd359480 ffffffc0008f12a0 0000000000000001
- [ 46.970723] 7ba0: ffffffc0174f7bb0 ffffffbffd354468 ffffffc0174f7bd0 ffffffbffd398014
- [ 46.978535] 7bc0: ffffffbffd398000 ffffffc0008ea000 ffffffc0174f7c00 ffffffc000082218
- [ 46.986348] 7be0: ffffffbffd398000 ffffffc0008ea000 ffffffc0008f12a0 00000000ffffffff
- [ 46.994160] 7c00: ffffffc0174f7c90 ffffffc000108f28 ffffffbffd378a80 ffffffc0008fb000
- [ 47.001973] 7c20: ffffffc0184f2490 ffffffc0175aec00 0000000000000000 0000000000000000
- [ 47.009785] 7c40: ffffffbffd378a80 ffffffc0008fb000 ffffffc0184f2490 ffffffc0008fb000
- [ 47.017598] 7c60: 0000000000000000 0000000000000000 ffffffc0184f2000 0000000000000000
- [ 47.025412] 7c80: 0000000000000019 cb88537fdc8ba63c ffffffc0174f7cc0 ffffffc0000ef2a0
- [ 47.033223] 7ca0: ffffffbffd378a80 ffffffc0174f7e58 ffffffc0184f2490 ffffffc0008fb000
- [ 47.041036] 7cc0: ffffffc0174f7e00 ffffffc0000ef85c 000000000000c8e0 0000007f7cccb900
- [ 47.048848] 7ce0: ffffff80055498e0 0000000000000000 0000007f7cd89340 0000000000010000
- [ 47.056661] 7d00: ffffffc01884a100 0000000000000069 ffffffc0005db000 ffffffc01884a100
- [ 47.064473] 7d20: 0000000000400000 ffffffc0008ea000 0000007f7cd89340 ffffffbffd378ca0
- [ 47.072285] 7d40: ffffffc0174f7da8 ffffffc000968bf0 ffffffc000968998 00e8000000000713
- [ 47.080098] 7d60: ffffffbffd398168 ffffff8005549820 ffffffc0007c18b0 ffffffc0000ec740
- [ 47.087910] 7d80: 00000000000ec8e0 0000007f7cbdf020 ffffffbffd3545e8 0000007f00000008
- [ 47.095722] 7da0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
- [ 47.103536] 7dc0: 0000000000666471 0000000000000000 0000000000000000 0000000000000000
- [ 47.111349] 7de0: 0000000000000000 0000000000000000 0000000000000000 cb88537fdc8ba63c
- [ 47.119161] 7e00: 0000007ff76df8c0 ffffffc0000855b0 0000000000000000 000000001e6b9000
- [ 47.126974] 7e20: ffffffffffffffff 0000007f7cd3f444 0000000080000000 0000000000000015
- [ 47.134786] 7e40: 000000000000011d ffffffc00014c19c ffffffc01cce0b00 ffffff800545d000
- [ 47.142599] 7e60: 00000000000ec8e0 ffffff80055492a0 ffffff80055491c8 ffffff80055042c0
- [ 47.150411] 7e80: 000000000008c490 00000000000a4700 0000000000000000 0000000000000000
- [ 47.158223] 7ea0: 000000000001efa0 0000001700000016 0000000000000013 0000000000000010
- [ 47.166036] 7ec0: 0000007f7cbdf020 00000000000ec8e0 0000007f7cd89340 0000000000000000
- [ 47.173848] 7ee0: 0000000000000000 0000000000000000 00000000fffffff0 0000000000000000
- [ 47.181661] 7f00: 0000000000000069 0000000000000003 0000000062660000 0000000000000000
- [ 47.189473] 7f20: 0000000000000000 0000000000000001 0000000000000038 0000000000000000
- [ 47.197287] 7f40: 0000005558c48e48 0000007f7cd3f34c 0000000000000000 0000005558c49098
- [ 47.205099] 7f60: 0000007f7cbdf020 0000000000000003 00000000000ec8e0 0000007f7cd89340
- [ 47.212911] 7f80: 0000007ff76dfbd8 0000005558c38195 0000000000000020 0000007f7cd8c000
- [ 47.220724] 7fa0: 0000000000000020 0000007ff76df8c0 0000005558c37618 0000007ff76df8c0
- [ 47.228536] 7fc0: 0000007f7cd3f444 0000000080000000 0000007f7cbdf020 0000000000000069
- [ 47.236348] 7fe0: 0000000000000000 0000000000000000 34365f7837303871 2f69466957694d5f
- [ 47.244159] Call trace:
- [ 47.252269] [<ffffffbffd1b3310>] ol_ath_ahb_probe+0xe0/0x508 [qca_ol]
- [ 47.254533] [<ffffffbffd1b38e4>] ol_ath_ahb_ssr+0x1ac/0x6f8 [qca_ol]
- [ 47.261129] [<ffffffbffd1b4354>] ol_ath_pld_probe+0x1c/0x38 [qca_ol]
- [ 47.267550] [<ffffffbffd178bb4>] pld_pcie_device_self_recovery+0x23c/0x268 [qca_ol]
- [ 47.273591] [<ffffffc0003a4b1c>] cnss_qca8074_notifier_nb+0x28/0x7c
- [ 47.280966] [<ffffffc0000abf30>] notifier_call_chain+0x50/0x84
- [ 47.287213] [<ffffffc0000ac410>] __srcu_notifier_call_chain+0x80/0xac
- [ 47.293117] [<ffffffc0000ac450>] srcu_notifier_call_chain+0x14/0x1c
- [ 47.299628] [<ffffffc000305a40>] subsys_notif_queue_notification+0x38/0x4c
- [ 47.305705] [<ffffffc00030706c>] notify_each_subsys_device.isra.6+0xa4/0xc0
- [ 47.312649] [<ffffffc000307b78>] __subsystem_get+0x148/0x1a0
- [ 47.319503] [<ffffffc000307be0>] subsystem_get+0x10/0x18
- [ 47.325406] [<ffffffc0003a6ad8>] cnss_wlan_register_driver+0x9c/0x158
- [ 47.331005] [<ffffffbffd178c20>] pld_ahb_register_driver+0x10/0x20 [qca_ol]
- [ 47.337343] [<ffffffbffd177504>] pld_register_driver+0x8c/0x148 [qca_ol]
- [ 47.344115] [<ffffffbffd1b4310>] pld_module_init+0x10/0x20 [qca_ol]
- [ 47.350915] [<ffffffbffd354468>] init_ath_ahb_3_0+0x50/0xf0 [wifi_3_0]
- [ 47.356894] [<ffffffbffd398014>] init_module+0x14/0x168 [wifi_3_0]
- [ 47.363343] [<ffffffc000082218>] do_one_initcall+0x19c/0x1b8
- [ 47.369507] [<ffffffc000108f28>] do_init_module+0x58/0x19c
- [ 47.375321] [<ffffffc0000ef2a0>] load_module+0x1660/0x1adc
- [ 47.380615] [<ffffffc0000ef85c>] SyS_init_module+0x140/0x16c
- [ 47.386083] [<ffffffc0000855b0>] el0_svc_naked+0x24/0x28
- [ 47.391900] Code: 58001f40 52803f42 aa1303e1 94bd5666 (d4210000)
- [ 47.398628] ---[ end trace 81759648e7c0ece0 ]---
- [ 47.403185] Trying to store crash panic, reason = 2 vs 1
- [ 47.407872] Kernel panic - not syncing: Fatal exception
- [ 47.413170] CPU0: stopping
- [ 47.418198] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P D 4.4.60 #0
- [ 47.420980] Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-AC04 (DT)
- [ 47.428186] Call trace:
- [ 47.434956] [<ffffffc000087b78>] dump_backtrace+0x0/0x128
- [ 47.437386] [<ffffffc000087cb4>] show_stack+0x14/0x1c
- [ 47.442943] [<ffffffc00027c1c0>] dump_stack+0x94/0xb4
- [ 47.447976] [<ffffffc00008c190>] handle_IPI+0xcc/0x134
- [ 47.453010] [<ffffffc000081cac>] gic_handle_irq+0x94/0xbc
- [ 47.458044] Exception stack(0xffffffc0008e7de0 to 0xffffffc0008e7f10)
- [ 47.463517] 7de0: 0000000000000000 0000008000000000 ffffffc0008e7f40 ffffffc000085d50
- [ 47.469942] 7e00: 0000000060000345 ffffffc0008c54c8 0000000000000000 0000000000000000
- [ 47.477754] 7e20: 0000000000000001 0000000000000000 0100000000000000 0000000000000000
- [ 47.485566] 7e40: 00000000000021e2 ffffffc01d800b90 ffffffc0008f1c00 ffffffc0008e7eb0
- [ 47.493380] 7e60: 00000000000006d0 0000000000000028 0000000000000000 0000000000000000
- [ 47.501192] 7e80: 0ffffffffffffffc 0000000075c1226a 00000000a6c66259 00000000c1ec15be
- [ 47.509005] 7ea0: 00000000eaa2a697 0000000000000000 ffffffc0008cd008 0000000000000000
- [ 47.516817] 7ec0: ffffffc0008cd9e0 ffffffc01ef96200 ffffffc0008c54c8 00000000419ea000
- [ 47.524629] 7ee0: 00000000419ed000 ffffffc000081198 0000000000000000 ffffffc0008e7f40
- [ 47.532441] 7f00: ffffffc000085d4c ffffffc0008e7f40
- [ 47.540248] [<ffffffc000084e7c>] el1_irq+0x7c/0xf4
- [ 47.544939] [<ffffffc0000c3778>] default_idle_call+0x20/0x28
- [ 47.549800] [<ffffffc0000c3924>] cpu_startup_entry+0x158/0x20c
- [ 47.555617] [<ffffffc0005d0284>] rest_init+0x80/0x8c
- [ 47.561260] [<ffffffc00089a978>] start_kernel+0x3a8/0x3bc
- [ 47.566377] [<00000000415d5000>] 0x415d5000
- [ 47.571670] CPU1: stopping
- [ 47.575662] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.4.60 #0
- [ 47.578445] Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-AC04 (DT)
- [ 47.585650] Call trace:
- [ 47.592415] [<ffffffc000087b78>] dump_backtrace+0x0/0x128
- [ 47.594851] [<ffffffc000087cb4>] show_stack+0x14/0x1c
- [ 47.600405] [<ffffffc00027c1c0>] dump_stack+0x94/0xb4
- [ 47.605439] [<ffffffc00008c190>] handle_IPI+0xcc/0x134
- [ 47.610474] [<ffffffc000081cac>] gic_handle_irq+0x94/0xbc
- [ 47.615509] Exception stack(0xffffffc00ffd3e20 to 0xffffffc00ffd3f50)
- [ 47.620981] 3e20: 0000000000000000 0000008000000000 ffffffc00ffd3f80 ffffffc000085d50
- [ 47.627408] 3e40: 0000000060000145 0000000000000000 0000000000000000 0000000000000000
- [ 47.635220] 3e60: 0000000000000001 0000000000000000 0100000000000000 0000000000000001
- [ 47.643032] 3e80: 0000000000002190 0000000000000001 ffffffc00ffc8730 ffffffc00ffd3ef0
- [ 47.650845] 3ea0: 00000000000006d0 0000000000000000 0000007ff647cef0 000000556770185c
- [ 47.658657] 3ec0: 0000000000000038 0000000000000000 ffffffc0000db1f4 0000007f8d3a6cdc
- [ 47.666469] 3ee0: 0000000000000000 0000000000000000 ffffffc0008cd008 0000000000000000
- [ 47.674283] 3f00: ffffffc0008cd9e0 0000000000000000 0000000000000000 00000000419ea000
- [ 47.682095] 3f20: 00000000419ed000 ffffffc000081fd0 0000000000000000 ffffffc00ffd3f80
- [ 47.689907] 3f40: ffffffc000085d4c ffffffc00ffd3f80
- [ 47.697713] [<ffffffc000084e7c>] el1_irq+0x7c/0xf4
- [ 47.702402] [<ffffffc0000c3778>] default_idle_call+0x20/0x28
- [ 47.707264] [<ffffffc0000c3924>] cpu_startup_entry+0x158/0x20c
- [ 47.713079] [<ffffffc00008bd7c>] secondary_start_kernel+0x130/0x13c
- [ 47.718721] [<0000000041081fbc>] 0x41081fbc
- [ 47.724881] CPU2: stopping
- [ 47.729047] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P D 4.4.60 #0
- [ 47.731830] Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-AC04 (DT)
- [ 47.739035] Call trace:
- [ 47.745800] [<ffffffc000087b78>] dump_backtrace+0x0/0x128
- [ 47.748236] [<ffffffc000087cb4>] show_stack+0x14/0x1c
- [ 47.753791] [<ffffffc00027c1c0>] dump_stack+0x94/0xb4
- [ 47.758825] [<ffffffc00008c190>] handle_IPI+0xcc/0x134
- [ 47.763858] [<ffffffc000081cac>] gic_handle_irq+0x94/0xbc
- [ 47.768894] Exception stack(0xffffffc00ffd7e20 to 0xffffffc00ffd7f50)
- [ 47.774366] 7e20: 0000000000000000 0000008000000000 ffffffc00ffd7f80 ffffffc000085d50
- [ 47.780793] 7e40: 0000000060000145 0000000000000000 0000000000000000 0000000000000000
- [ 47.788605] 7e60: 0000000000000001 0000000000000000 0100000000000000 ffffffc0008ea848
- [ 47.796417] 7e80: 0000000000000001 00350c5272b0c600 ffffffc00ffc9230 ffffffc00ffd7ef0
- [ 47.804230] 7ea0: 00000000000006d0 0000000025415795 0000000000000018 ffffffffa0f7f24e
- [ 47.812042] 7ec0: 002b4d85dd000000 003b9aca00000000 ffffffc000184160 0000007f8efaf0d4
- [ 47.819854] 7ee0: 0000000000000000 0000000000000000 ffffffc0008cd008 0000000000000000
- [ 47.827668] 7f00: ffffffc0008cd9e0 0000000000000000 0000000000000000 00000000419ea000
- [ 47.835481] 7f20: 00000000419ed000 ffffffc000081fd0 0000000000000000 ffffffc00ffd7f80
- [ 47.843292] 7f40: ffffffc000085d4c ffffffc00ffd7f80
- [ 47.851099] [<ffffffc000084e7c>] el1_irq+0x7c/0xf4
- [ 47.855787] [<ffffffc0000c3778>] default_idle_call+0x20/0x28
- [ 47.860650] [<ffffffc0000c3924>] cpu_startup_entry+0x158/0x20c
- [ 47.866465] [<ffffffc00008bd7c>] secondary_start_kernel+0x130/0x13c
- [ 47.872107] [<0000000041081fbc>] 0x41081fbc
- [ 52.878406] Couldn't get reading for sensor 4
- [ 52.878479] Couldn't get reading for sensor 5
- [ 52.881784] Couldn't get reading for sensor 6
- [ 52.886069] The reading for sensor 7 is 0x0020717d
- [ 52.890409] The reading for sensor 8 is 0x0020817a
- [ 52.895152] Couldn't get reading for sensor 9
- [ 52.899871] The reading for sensor 10 is 0x0020a18d
- [ 52.904299] The reading for sensor 11 is 0x0020b191
- [ 52.909041] Couldn't get reading for sensor 12
- [ 52.913847] The reading for sensor 13 is 0x0020d18d
- [ 52.918361] The reading for sensor 14 is 0x0020e17d
- [ 52.923189] Couldn't get reading for sensor 15
- [ 52.928007] Trying to store crash syslog !
- [ 53.932524] Trying to store crash panic, reason = 1 vs 1
- [ 53.935041] get crash_buf len 52445 vs 524260, 524288
- [ 53.944295] Rebooting in 5 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement