[2018-09-03 04:21:58] [Output] : ★ Jared Lyall enters the vehicle, pulling a button from the inside as to open up the vehicle's hood.
[2018-09-03 04:22:05] [Output] : ★ Jared Lyall opens up the door, then steps outside and heads towards the front of the vehicle - opening
[2018-09-03 04:22:13] [Output] : ★ - up the hood entirely as he reaches under it and supports it with the stands.      ((Jared Lyall))
[2018-09-03 04:22:35] [Output] : ★ Jared Lyall reaches for the two boxes near the vehicle - one being a toolbox and the other being a
[2018-09-03 04:22:40] [Output] : ★ bolt organizer box.      ((Jared Lyall))
[2018-09-03 04:22:46] [Output] : ★ Jared Lyall places both of the boxes onto the ground near the hood, then reaches into the toolbox and
[2018-09-03 04:22:52] [Output] : ★ takes out a socket and a rachet, then untightens the nuts on the battery's negative      ((Jared Lyall))
[2018-09-03 04:22:57] [Output] : ★ - terminal.      ((Jared Lyall))
[2018-09-03 04:23:03] [Output] : ★ Jared Lyall proceeds to remove the cable, then repeats the same actions for the battery's -
[2018-09-03 04:23:09] [Output] : ★ - positive terminal.      ((Jared Lyall))
[2018-09-03 04:23:14] [Output] : ★ Jared Lyall reaches for the battery's handle, then pulls it upwards, placing it carefully next to him -
[2018-09-03 04:23:21] [Output] : ★ - on the ground.      ((Jared Lyall))
[2018-09-03 04:23:26] [Output] : ★ Jared Lyall places back the socket and wrench into the toolbox, and reaches into his pocket for the -
[2018-09-03 04:23:31] [Output] : ★ - vehicle keys.      ((Jared Lyall))
[2018-09-03 04:23:35] [Output] : ★ Jared Lyall opens up the vehicle trunk, and reaches for a couple of hydraulic jacks.
[2018-09-03 04:23:40] [Output] : ★ Jared Lyall places them under the vehicle. He starts pressing each jack after -
[2018-09-03 04:23:45] [Output] : ★ - securely tightening the jack under different axle parts. Jared ensures they're -      ((Jared Lyall))
[2018-09-03 04:23:53] [Output] : ★ - placed on spots that do not threaten the axle's integrity, so he'd place them next to -      ((Jared Lyall))
[2018-09-03 04:24:15] [Output] : ★ - a beam axle, but not on it as not to damage it.      ((Jared Lyall))
[2018-09-03 04:24:25] [Output] : ★ Jared Lyall reaches for two medium-sized containers, he grabs them then heads back -
[2018-09-03 04:24:29] [Output] : ★ - to the vehicle.      ((Jared Lyall))
[2018-09-03 04:24:34] [Output] : ★ Jared Lyall places one under the coolant and another one under the engine oil valve; proceeding to -
[2018-09-03 04:24:41] [Output] : ★ - unscrew the valves as to drain both of them into the containers.      ((Jared Lyall))
[2018-09-03 04:24:55] [Output] : ★ There would be a good amount of glitter in the oil due to the high vehicle mileage.      ((Jared Lyall))
[2018-09-03 04:25:01] [Output] : ★ Jared Lyall pushes away the containers from under the vehicle after the valves have been -
[2018-09-03 04:25:07] [Output] : ★ - completely drained.      ((Jared Lyall))
[2018-09-03 04:25:11] [Output] : ★ Jared Lyall starts lowering the vehicle once more.
[2018-09-03 04:25:17] [Output] : ★ Jared Lyall proceeds to unplug a coolant line from the radiator to the transmission coolant -
[2018-09-03 04:25:24] [Output] : ★ then reaches into the toolbox quickly and plugs it into the line to prevent leaking the      ((Jared Lyall))
[2018-09-03 04:25:28] [Output] : ★ fluid everywhere.      ((Jared Lyall))
[2018-09-03 04:25:33] [Output] : ★ Jared Lyall reaches for a 45 degrees plier and a 90 degrees plier - using both to reach into the hose
[2018-09-03 04:25:42] [Output] : ★ clamps and removes the second line.      ((Jared Lyall))
[2018-09-03 04:25:59] [Output] : ★ Jared Lyall places back the clamps into the toolbox and reaches into it once more for a socket and -
[2018-09-03 04:26:04] [Output] : ★ - a wrench, removing the bolts holding down the radiator then placing the bolts down -      ((Jared Lyall))
[2018-09-03 04:26:09] [Output] : ★ - onto the ground next to him, next to the wall.      ((Jared Lyall))
[2018-09-03 04:26:12] [Output] : ★ Jared Lyall puts down the socket and ratchet next to the bolts.
[2018-09-03 04:26:17] [Output] : ★ Jared Lyall removes the radiator entirely from the vehicle and places it next to the battery.
[2018-09-03 04:26:21] [Output] : ★ Jared Lyall leans up the radiator against the wall.
[2018-09-03 04:26:27] [Output] : ★ Jared Lyall reaches into the vehicle, he aims for the throttle cable, rolling it backwards and then -
[2018-09-03 04:26:32] [Output] : ★ - slips the cable out.      ((Jared Lyall))
[2018-09-03 04:26:49] [Output] : ★ Jared Lyall reaches into the toolbox and takes out the ratchet and socket, removing the -
[2018-09-03 04:26:54] [Output] : ★ - bolts that hold the cable into the intake, then places the bolts into the holder's second      ((Jared Lyall))
[2018-09-03 04:26:57] [Output] : ★ - slot.      ((Jared Lyall))
[2018-09-03 04:27:02] [Output] : ★ Jared Lyall pushes the intake out of the way.
[2018-09-03 04:27:09] [Output] : ★ Jared Lyall lowers the hood, then places his hands under it; looking for the bolts carefully -
[2018-09-03 04:27:14] [Output] : ★ - as not to scratch the fenders, then unscrews them.      ((Jared Lyall))
[2018-09-03 04:27:18] [Output] : ★ Jared Lyall removes the hood entirely from its position.
[2018-09-03 04:27:22] [Output] : ★ Jared Lyall places it hood against the wall.
[2018-09-03 04:27:31] [Output] : ★ Jared Lyall unbolts the airbox using the socket and ratchet, then removes it and places it against the -
[2018-09-03 04:27:35] [Output] : ★ - wall as well.      ((Jared Lyall))
[2018-09-03 04:27:41] [Output] : ★ Jared Lyall removes the wiring harness between the runners and the intake manifold.
[2018-09-03 04:27:45] [Output] : ★ Jared Lyall turns his head towards the air compressor - disconnecting it and disconnecting the -
[2018-09-03 04:27:49] [Output] : ★ - power steering pump.      ((Jared Lyall))
[2018-09-03 04:27:55] [Output] : ★ Jared Lyall reaches for the three bolts on the power assembly - the bolts being of different sizes -
[2018-09-03 04:28:08] [Output] : ★ two being 15mm, one being 17mm (06 charger specs).      ((Jared Lyall))
[2018-09-03 04:28:17] [Output] : ★ Jared Lyall proceeds to use the appropriate sockets, removing the three bolts and placing them near -
[2018-09-03 04:28:22] [Output] : ★ - the wall.      ((Jared Lyall))
[2018-09-03 04:28:30] [Output] : ★ Jared Lyall removes the pump from the engine and pushes it away.
[2018-09-03 04:28:35] [Output] : ★ There would be some clearance between the harmonic balancer and the fender.      ((Jared Lyall))
[2018-09-03 04:28:41] [Output] : ★ Jared Lyall reaches for the impact gun in the toolbox, then proceeds to remove the bolts holding -
[2018-09-03 04:28:49] [Output] : ★ the harmonic balancer into place.      ((Jared Lyall))
[2018-09-03 04:28:54] [Output] : ★ Jared Lyall pulls out the harmonic balancer and places it next to the vehicle parts near the wall.
[2018-09-03 04:28:58] [Output] : ★ Jared Lyall reaches for the exhaust pipe - disconnecting the bolts holding it with the impact gun.
[2018-09-03 04:29:01] [Output] : ★ Jared Lyall places back the impact gun into the toolbox, then reaches for another hydro-jack.
[2018-09-03 04:29:05] [Output] : ★ Jared Lyall places the hydro-jack under the transmission pan to push the pan up, then pulls it out.
[2018-09-03 04:29:13] [Output] : ★ The cover hiding the driver plate would be in plain sight now.      ((Jared Lyall))
[2018-09-03 04:29:18] [Output] : ★ Jared Lyall pulls up the plastic cover and places it next to the car parts near the wall.
[2018-09-03 04:29:23] [Output] : ★ Jared Lyall turns his head once more to the now obvious torque converter, which was hidden by -
[2018-09-03 04:29:27] [Output] : ★ - the plastic cover.      ((Jared Lyall))
[2018-09-03 04:29:36] [Output] : ★ Jared Lyall takes out a socket with a ratchet as he starts to loosen up the spark plugs.
[2018-09-03 04:29:40] [Output] : ★ Jared Lyall places the socket and ratchet onto the bolts on the crank shaft and loosens them up -
[2018-09-03 04:29:45] [Output] : ★ - from the torque converter, moving the converter with his other hand as he rotates it and -      ((Jared Lyall))
[2018-09-03 04:29:52] [Output] : ★ - removes the bolts from it accordingly.      ((Jared Lyall))
[2018-09-03 04:29:56] [Output] : ★ Jared Lyall heads for the engine to transmission bolts as he starts loosening them up.
[2018-09-03 04:30:00] [Output] : ★ Jared Lyall removes the second grade 8 bolt underneath the cover entirely.
[2018-09-03 04:30:05] [Output] : ★ Jared Lyall reaches for another jack and a small block of wood.
[2018-09-03 04:30:09] [Output] : ★ Jared Lyall adjusts the block of wood onto the jack, and pushes it under the oil pan as to -
[2018-09-03 04:30:15] [Output] : ★ - get clearance on the engine bolts to unscrew and remove them.      ((Jared Lyall))
[2018-09-03 04:30:20] [Output] : ★ Jared Lyall proceeds to remove the bolts and nut set from the first engine mount.
[2018-09-03 04:30:24] [Output] : ★ Jared Lyall removes the bolts from the second engine mount, near the fender.
[2018-09-03 04:30:28] [Output] : ★ Jared Lyall removes the final engine to transmission bolt which has been loosened earlier.
[2018-09-03 04:30:34] [Output] : ★ A gap would form between the engine and transmission.      ((Jared Lyall))
[2018-09-03 04:30:40] [Output] : ★ Jared Lyall reaches for a crane, he ties the crane's chains to the intake runners, from the -
[2018-09-03 04:30:45] [Output] : ★ - fender's side.      ((Jared Lyall))
[2018-09-03 04:30:48] [Output] : ★ Jared Lyall ties the chain around the exhaust manifold runners around the engine as well.
[2018-09-03 04:30:56] [Output] : ★ Jared Lyall hooks up the chain to the crane, ensuring nothing's bound up by the chain.
[2018-09-03 04:31:03] [Output] : ★ Jared Lyall double checks that nothing is still connected to the engine before heading -
[2018-09-03 04:31:11] [Output] : ★ - towards the crane.      ((Jared Lyall))
[2018-09-03 04:31:17] [Output] : ★ Jared Lyall jacks up the crane until the tension starts to build on the chain.
[2018-09-03 04:31:21] [Output] : ★ Jared Lyall ensures once more than nothing is binding by heading towards the engine himself -
[2018-09-03 04:31:27] [Output] : ★ - after the tension's been built and moving the engine a bit - also separating it      ((Jared Lyall))
[2018-09-03 04:31:34] [Output] : ★ - farther off from the transmission.      ((Jared Lyall))
[2018-09-03 04:31:41] [Output] : ★ Jared Lyall reaches for a pry bar, then pushes it between the engine and transmission carefully.
[2018-09-03 04:31:45] [Output] : ★ Jared Lyall slowly separates them a bit further just to get enough leeway.
[2018-09-03 04:31:48] [Output] : ★ Jared Lyall pumps up the crane once more.
[2018-09-03 04:31:53] [Output] : ★ The driver plate would be entirely visible.      ((Jared Lyall))
[2018-09-03 04:31:57] [Output] : ★ Jared Lyall cranks up the engine completely from the  vehicle, then carefully pushes the crane -
[2018-09-03 04:32:03] [Output] : ★ - away after ensuring the engine has enough leverage.      ((Jared Lyall))
[2018-09-03 04:32:10] [Output] : ★ The engine would now be completely removed from the vehicle.      ((Jared Lyall))
[2018-09-03 04:32:16] [Output] : ★ Jared Lyall Jared Lyall grabs a 2mm socket and a wrench, then beings to twist the bumper's bolt counter -
[2018-09-03 04:32:21] [Output] : ★ -clockwise.      ((Jared Lyall))
[2018-09-03 04:32:31] [Output] : ★ The radiator is already removed along with everything in the engine bay.      ((Jared Lyall))
[2018-09-03 04:32:37] [Output] : ★ The bumpers are now removed.      ((Jared Lyall))
[2018-09-03 04:32:50] [Output] : ★ Jared Lyall reaches for the hydro-jack, then heads over to the front-side wheel.
[2018-09-03 04:33:00] [Output] : ★ Jared Lyall lifts the vehicle, he then reaches for a socket and ratchet.
[2018-09-03 04:33:12] [Output] : ★ Jared Lyall starts removing the nuts on the wheel, then removes the rim.
[2018-09-03 04:33:39] [Output] : ★ After removing the nuts holding the rum, Jared removes the nuts holding the wheel.      ((Jared Lyall))
[2018-09-03 04:33:49] [Output] : ★ Jared Lyall removes the wheel in its entirety, placing it next to the other vehicle parts along the wall.
[2018-09-03 04:34:00] [Output] : ★ Jared Lyall reaches for another hydro-jack, then heads for the other front-side wheel.
[2018-09-03 04:34:05] [Output] : ★ Jared Lyall lifts the vehicle, repeating the procees.
[2018-09-03 04:34:09] [Output] : Jared Lyall: (( process* ))
[2018-09-03 04:34:17] [Output] : ★ Jared Lyall reaches for a socket and ratchet, removes the rim, then removes the wheel.
[2018-09-03 04:34:26] [Output] : ★ Jared Lyall places the wheel next to the other wheels along the wall.
[2018-09-03 04:34:39] [Output] : ★ Jared Lyall repeats the process with the other two wheels.
[2018-09-03 04:34:46] [Output] : ★ Jared Lyall grabs a 9mm spanner and applies it to the brake hose, twisting it counterclockwise -
[2018-09-03 04:34:52] [Output] : ★ - to release the bolt.      ((Jared Lyall))
[2018-09-03 04:34:56] [Output] : ★ Jared Lyall applies the spanner to both bolts sequentially in order to remove them, then pops out
[2018-09-03 04:35:02] [Output] : ★ - the brake pads.      ((Jared Lyall))
[2018-09-03 04:35:07] [Output] : ★ Jared Lyall places the brake caliper near the wall.
[2018-09-03 04:35:11] [Output] : ★ Jared Lyall repeats the process for the other brakes.
[2018-09-03 04:35:18] [Output] : ★ Jared Lyall reaches for a hydro-jack.
[2018-09-03 04:35:22] [Output] : ★ Jared Lyall places the jack next to him, then reaches forward for the rubber cover in the driver's door,
[2018-09-03 04:35:28] [Output] : ★ pulling it until a screw is revealed.      ((Jared Lyall))
[2018-09-03 04:35:34] [Output] : ★ Jared Lyall reaches for a screwdriver and unscrews it.
[2018-09-03 04:35:39] [Output] : ★ An electric connector is revealed.      ((Jared Lyall))
[2018-09-03 04:35:42] [Output] : ★ Jared Lyall pulls the connector apart, depressing the tab and separating the door until the door is half
[2018-09-03 04:35:53] [Output] : ★ removed from the car body.      ((Jared Lyall))
[2018-09-03 04:35:59] [Output] : ★ Jared Lyall unbolts the hinges entirely, then slowly places his left hand under the door as the hinges -
[2018-09-03 04:36:04] [Output] : ★ - fall off, then holds the door and rests it up against the wall.      ((Jared Lyall))
[2018-09-03 04:36:16] [Output] : ★ Jared Lyall repeats the process with the other three doors.
[2018-09-03 04:39:23] [Output] : ★ Jared Lyall reaches for the front of the vehicle.
[2018-09-03 04:39:27] [Output] : ★ Jared Lyall looks over as he inspects the front-lights.
[2018-09-03 04:39:38] [Output] : ★ Jared Lyall reaches into the engine bay, he starts unwiring the front-lights.
[2018-09-03 04:40:08] [Output] : ★ Jared Lyall reaches for a socket and ratchet as he starts unbolting the nuts attached in the -
[2018-09-03 04:40:12] [Output] : ★ - engine bay that hold the lights in place.      ((Jared Lyall))
[2018-09-03 04:40:43] [Output] : ★ Jared Lyall removes the front-left car headlight.
[2018-09-03 04:40:52] [Output] : ★ Jared Lyall looks over at the other headlight.
[2018-09-03 04:41:01] [Output] : ★ Jared Lyall reaches into the engine bay, he unwires the other light.
[2018-09-03 04:41:05] [Output] : ★ Jared Lyall reaches for the same socket and ratchet.
[2018-09-03 04:41:10] [Output] : ★ Jared Lyall starts unbolting the nuts attached to the second light.
[2018-09-03 04:41:14] [Output] : ★ Jared Lyall removes the second headlight.
[2018-09-03 04:41:22] [Output] : ★ Jared Lyall places both headlights against the wall, next to the other vehicle parts.
[2018-09-03 04:41:29] [Output] : ★ Jared Lyall slowly walks to the back-end of the vehicle.
[2018-09-03 04:41:38] [Output] : ★ Jared Lyall opens up the trunk, then starts removing the nuts holding the trunk in place using -
[2018-09-03 04:41:48] [Output] : ★ - the socket and ratchet, then slowly removes the trunk entirely and places it next -      ((Jared Lyall))
[2018-09-03 04:41:54] [Output] : ★ - to the other vehicle parts against the wall.      ((Jared Lyall))
[2018-09-03 04:42:17] [Output] : ★ Jared Lyall removes the trunk dressing, now the wiring and nuts holding the backlights are -
[2018-09-03 04:42:20] [Output] : ★ - visible.      ((Jared Lyall))
[2018-09-03 04:42:28] [Output] : ★ Jared Lyall reaches for the socket and ratchet.
[2018-09-03 04:42:34] [Output] : ★ Jared Lyall starts unbolting the nuts holding the backlights in place.
[2018-09-03 04:42:45] [Output] : ★ Jared Lyall does this for the left brake light first.
[2018-09-03 04:42:56] [Output] : ★ Jared Lyall removes the brakelight after disconnecting it, then places it against the wall.
[2018-09-03 04:43:00] [Output] : ★ Jared Lyall heads towards the second brakelight.
[2018-09-03 04:43:03] [Output] : ★ Jared Lyall starts unbolting it.
[2018-09-03 04:43:12] [Output] : ★ Jared Lyall removes the backlight and places it next to the other one.
[2018-09-03 04:43:43] [Output] : ★ Jared Lyall heads inside the vehicle, he readjusts the seat as he starts removing the screws holding the -
[2018-09-03 04:43:47] [Output] : ★ - front driver's seat.      ((Jared Lyall))
[2018-09-03 04:44:12] [Output] : ★ Jared Lyall ensures nothing's holding down the driver seat then removes it from the vehicle.
[2018-09-03 04:44:36] [Output] : ★ Jared Lyall repeats the process for the passenger side seat.
[2018-09-03 04:44:56] [Output] : ★ Jared Lyall places both seats against the wall.