Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg
- ---<<BOOT>>---
- Copyright (c) 1992-2023 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
- root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
- FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
- VT(vga): resolution 640x480
- CPU: AMD Ryzen Embedded V3C18I 8-Core Processor (1896.48-MHz K8-class CPU)
- Origin="AuthenticAMD" Id=0xa40f41 Family=0x19 Model=0x44 Stepping=1
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
- AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
- AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
- Structured Extended Features=0x219c95a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
- Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID>
- XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
- AMD Extended Feature Extensions ID EBX=0x191ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD>
- SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
- TSC: P-state invariant, performance statistics
- real memory = 68717379584 (65534 MB)
- avail memory = 66589589504 (63504 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <ALASKA A M I >
- FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
- FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
- random: registering fast source Intel Secure Key RNG
- random: fast provider: "Intel Secure Key RNG"
- random: unblocking device.
- ioapic0 <Version 2.1> irqs 0-23
- ioapic1 <Version 2.1> irqs 24-55
- Launching APs: 1 2 3 15 5 8 12 6 13 10 14 9 7 4 11
- random: entropy device external interface
- kbd0 at kbdmux0
- efirtc0: <EFI Realtime Clock>
- efirtc0: registered as a time-of-day clock, resolution 1.000000s
- vtvga0: <VT VGA driver>
- smbios0: <System Management BIOS> at iomem 0xd93cc000-0xd93cc01e
- smbios0: Version: 3.4, BCD Revision: 3.4
- aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
- acpi0: <ALASKA A M I >
- acpi0: Power Button (fixed)
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
- atrtc0: registered as a time-of-day clock, resolution 1.000000s
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 350
- Event timer "HPET1" frequency 14318180 Hz quality 350
- Event timer "HPET2" frequency 14318180 Hz quality 350
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
- pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
- pci1: <ACPI PCI bus> on pcib1
- nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff,0xfcf04000-0xfcf05fff at device 0.0 on pci1
- pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
- pci2: <ACPI PCI bus> on pcib2
- nvme1: <Generic NVMe Device> mem 0xfce00000-0xfce03fff,0xfce04000-0xfce05fff at device 0.0 on pci2
- pcib3: <ACPI PCI-PCI bridge> at device 1.3 on pci0
- pci3: <ACPI PCI bus> on pcib3
- pci3: <network> at device 0.0 (no driver attached)
- pcib4: <ACPI PCI-PCI bridge> at device 2.1 on pci0
- pci4: <ACPI PCI bus> on pcib4
- igc0: <Intel(R) Ethernet Controller I226-IT> mem 0xfc900000-0xfc9fffff,0xfca00000-0xfca03fff at device 0.0 on pci4
- igc0: Using 1024 TX descriptors and 1024 RX descriptors
- igc0: Using 4 RX queues 4 TX queues
- igc0: Using MSI-X interrupts with 5 vectors
- igc0: Ethernet address: d0:63:b4:05:47:3f
- igc0: netmap queues/slots: TX 4/1024, RX 4/1024
- pcib5: <ACPI PCI-PCI bridge> at device 2.2 on pci0
- pci5: <ACPI PCI bus> on pcib5
- igc1: <Intel(R) Ethernet Controller I226-IT> mem 0xfc600000-0xfc6fffff,0xfc700000-0xfc703fff at device 0.0 on pci5
- igc1: Using 1024 TX descriptors and 1024 RX descriptors
- igc1: Using 4 RX queues 4 TX queues
- igc1: Using MSI-X interrupts with 5 vectors
- igc1: Ethernet address: d0:63:b4:05:47:40
- igc1: netmap queues/slots: TX 4/1024, RX 4/1024
- pcib6: <ACPI PCI-PCI bridge> at device 2.3 on pci0
- pci6: <ACPI PCI bus> on pcib6
- igc2: <Intel(R) Ethernet Controller I226-IT> mem 0xfc300000-0xfc3fffff,0xfc400000-0xfc403fff at device 0.0 on pci6
- igc2: Using 1024 TX descriptors and 1024 RX descriptors
- igc2: Using 4 RX queues 4 TX queues
- igc2: Using MSI-X interrupts with 5 vectors
- igc2: Ethernet address: d0:63:b4:05:47:41
- igc2: netmap queues/slots: TX 4/1024, RX 4/1024
- pcib7: <ACPI PCI-PCI bridge> at device 2.4 on pci0
- pci7: <ACPI PCI bus> on pcib7
- igc3: <Intel(R) Ethernet Controller I226-IT> mem 0xfc000000-0xfc0fffff,0xfc100000-0xfc103fff at device 0.0 on pci7
- igc3: Using 1024 TX descriptors and 1024 RX descriptors
- igc3: Using 4 RX queues 4 TX queues
- igc3: Using MSI-X interrupts with 5 vectors
- igc3: Ethernet address: d0:63:b4:05:47:42
- igc3: netmap queues/slots: TX 4/1024, RX 4/1024
- pcib8: <ACPI PCI-PCI bridge> at device 2.5 on pci0
- pci8: <ACPI PCI bus> on pcib8
- nvme2: <Generic NVMe Device> mem 0xfcc00000-0xfcc03fff,0xfcc04000-0xfcc05fff at device 0.0 on pci8
- pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
- pci9: <ACPI PCI bus> on pcib9
- pci9: <encrypt/decrypt> at device 0.2 (no driver attached)
- xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb900000-0xfb9fffff at device 0.3 on pci9
- xhci0: 64 bytes context size, 64-bit DMA
- usbus0 on xhci0
- usbus0: 5.0Gbps Super Speed USB v3.0
- xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfb800000-0xfb8fffff at device 0.4 on pci9
- xhci1: 64 bytes context size, 64-bit DMA
- usbus1 on xhci1
- usbus1: 5.0Gbps Super Speed USB v3.0
- pci9: <multimedia> at device 0.5 (no driver attached)
- pcib10: <ACPI PCI-PCI bridge> at device 8.2 on pci0
- pci10: <ACPI PCI bus> on pcib10
- ax0: <AMD 10 Gigabit Ethernet Driver> mem 0xfcb60000-0xfcb7ffff,0xfcb40000-0xfcb5ffff,0xfcb82000-0xfcb83fff at device 0.2 on pci10
- ax0: Using 512 TX descriptors and 512 RX descriptors
- ax0: Using 3 RX queues 3 TX queues
- ax0: Using MSI-X interrupts with 7 vectors
- ax0: Ethernet address: d0:63:b4:05:47:43
- ax0: SPH Enabled
- ax0: xgbe_config_sph_mode: SPH enabled in channel 0
- ax0: xgbe_config_sph_mode: SPH enabled in channel 1
- ax0: xgbe_config_sph_mode: SPH enabled in channel 2
- ax0: RSS Enabled
- ax0: Receive checksum offload Enabled
- ax0: VLAN filtering Enabled
- ax0: VLAN Stripping Enabled
- ax0: netmap queues/slots: TX 3/512, RX 3/512
- ax1: <AMD 10 Gigabit Ethernet Driver> mem 0xfcb20000-0xfcb3ffff,0xfcb00000-0xfcb1ffff,0xfcb80000-0xfcb81fff at device 0.3 on pci10
- ax1: Using 512 TX descriptors and 512 RX descriptors
- ax1: Using 3 RX queues 3 TX queues
- ax1: Using MSI-X interrupts with 7 vectors
- ax1: Ethernet address: d0:63:b4:05:47:44
- ax1: SPH Enabled
- ax1: xgbe_config_sph_mode: SPH enabled in channel 0
- ax1: xgbe_config_sph_mode: SPH enabled in channel 1
- ax1: xgbe_config_sph_mode: SPH enabled in channel 2
- ax1: RSS Enabled
- ax1: Receive checksum offload Enabled
- ax1: VLAN filtering Enabled
- ax1: VLAN Stripping Enabled
- ax1: netmap queues/slots: TX 3/512, RX 3/512
- pcib11: <ACPI PCI-PCI bridge> at device 8.3 on pci0
- pci11: <ACPI PCI bus> on pcib11
- xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfbe00000-0xfbefffff at device 0.0 on pci11
- xhci2: 64 bytes context size, 64-bit DMA
- usbus2 on xhci2
- usbus2: 5.0Gbps Super Speed USB v3.0
- xhci3: <XHCI (generic) USB 3.0 controller> mem 0xfbd00000-0xfbdfffff at device 0.3 on pci11
- xhci3: 64 bytes context size, 64-bit DMA
- usbus3 on xhci3
- usbus3: 5.0Gbps Super Speed USB v3.0
- xhci4: <XHCI (generic) USB 3.0 controller> mem 0xfbc00000-0xfbcfffff at device 0.4 on pci11
- xhci4: 64 bytes context size, 64-bit DMA
- usbus4 on xhci4
- usbus4: 5.0Gbps Super Speed USB v3.0
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- acpi_button0: <Power Button> on acpi0
- acpi_syscontainer0: <System Container> on acpi0
- uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
- ns8250: UART FCR is broken
- uart2: console (111111,n,8,1)
- cpu0: <ACPI CPU> on acpi0
- hwpstate0: <Cool`n'Quiet 2.0> on cpu0
- Timecounter "TSC" frequency 1896437051 Hz quality 1000
- Timecounters tick every 1.000 msec
- ugen4.1: <AMD XHCI root HUB> at usbus4
- ugen1.1: <AMD XHCI root HUB> at usbus1
- ugen3.1: <AMD XHCI root HUB> at usbus3
- ugen0.1: <AMD XHCI root HUB> at usbus0
- ugen2.1: <AMD XHCI root HUB> at usbus2
- uhub0 on usbus4
- uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
- uhub1 on usbus1
- uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
- uhub2 on usbus2
- uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
- uhub3 on usbus3
- uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
- uhub4 on usbus0
- uhub4: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- nvme0: Allocated 64MB host memory buffer
- nvme1: Allocated 64MB host memory buffer
- uhub2: 1 port with 1 removable, self powered
- uhub0: 2 ports with 2 removable, self powered
- nvme2: Allocated 64MB host memory buffer
- uhub3: 2 ports with 2 removable, self powered
- nda0 at nvme0 bus 0 scbus0 target 0 lun 1
- nda0: <ADATA LEGEND 710 VC2S038F 2N4429CGA1LF>
- nda0: Serial Number 2N4429CGA1LF
- nda0: nvme version 1.4
- nda0: 1953514MB (4000797360 512 byte sectors)
- nda1 at nvme1 bus 0 scbus1 target 0 lun 1
- nda1: <ADATA LEGEND 710 VC2S038F 2N4429S811UL>
- nda1: Serial Number 2N4429S811UL
- nda1: nvme version 1.4
- nda1: 1953514MB (4000797360 512 byte sectors)
- nda2 at nvme2 bus 0 scbus2 target 0 lun 1
- nda2: <ADATA LEGEND 710 VC2S038F 2N442LCGADUY>
- nda2: Serial Number 2N442LCGADUY
- nda2: nvme version 1.4
- nda2: 1953514MB (4000797360 512 byte sectors)
- Trying to mount root from cd9660:/dev/iso9660/14_0_RELEASE_AMD64_CD [ro]...
- uhub1: 5 ports with 5 removable, self powered
- uhub4: 6 ports with 6 removable, self powered
- ugen2.2: <vendor 0x8087 product 0x0032> at usbus2
- ugen1.2: <Quectel RM520N-GL> at usbus1
- ax1: Link is DOWN
- ax0: Link is DOWN
- Root mount waiting for: usbus0
- usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Ultra Fit (0x0781:0x5583)
- usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Ultra Fit (0x0781:0x5583)
- usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Ultra Fit (0x0781:0x5583)
- ugen0.2: <SanDisk Ultra Fit> at usbus0
- umass0 on uhub4
- umass0: <SanDisk Ultra Fit, class 0/0, rev 2.10/1.00, addr 1> on usbus0
- umass0: SCSI over Bulk-Only; quirks = 0xc100
- umass0:3:0: Attached to scbus3
- mountroot: waiting for device /dev/iso9660/14_0_RELEASE_AMD64_CD...
- da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
- da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device
- da0: Serial Number 4C530001251027109530
- da0: 40.000MB/s transfers
- da0: 58656MB (120127488 512 byte sectors)
- da0: quirks=0x2<NO_6_BYTE>
- Intel(R) Wireless WiFi based driver for FreeBSD
- intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
- smbus0: <System Management Bus> on intsmb0
- iwlwifi0: <iwlwifi> mem 0xfcd00000-0xfcd03fff at device 0.0 on pci3
- iwlwifi0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
- iwlwifi0: PCI dev 2725/e024, rev=0x420, rfid=0x10d000
- iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0-83.ucode'
- iwlwifi0: api flags index 2 larger than supported by driver
- iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
- iwlwifi0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm
- iwlwifi0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
- iwlwifi0: WRT: Invalid buffer destination
- iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20
- iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
- iwlwifi0: WFPM_AUTH_KEY_0: 0x90
- iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0
- iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0.pnvm'
- iwlwifi0: loaded PNVM version 181407b3
- iwlwifi0: Detected RF GF, rfid=0x10d000
- iwlwifi0: base HW address: 2c:33:58:f3:cc:4e
- driver bug: Unable to set devclass (class: ppc devname: (unknown))
- ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 10 on acpi0
- iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
- ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 11 on acpi0
- iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
- ig4iic2: <Designware I2C Controller> iomem 0xfedc4000-0xfedc4fff irq 4 on acpi0
- iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2
- ig4iic3: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
- iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3
- lo0: link state changed to UP
- u3g0 on uhub1
- u3g0: <Quectel RM520N-GL, class 0/0, rev 3.20/5.04, addr 1> on usbus1
- u3g0: Found 5 ports.
- ax0: SPH Enabled
- ax0: xgbe_config_sph_mode: SPH enabled in channel 0
- ax0: xgbe_config_sph_mode: SPH enabled in channel 1
- ax0: xgbe_config_sph_mode: SPH enabled in channel 2
- ax0: RSS Enabled
- ax0: Receive checksum offload Enabled
- ax0: VLAN filtering Enabled
- ax0: VLAN Stripping Enabled
- ax1: SPH Enabled
- ax1: xgbe_config_sph_mode: SPH enabled in channel 0
- ax1: xgbe_config_sph_mode: SPH enabled in channel 1
- ax1: xgbe_config_sph_mode: SPH enabled in channel 2
- ax1: RSS Enabled
- ax1: Receive checksum offload Enabled
- ax1: VLAN filtering Enabled
- ax1: VLAN Stripping Enabled
Add Comment
Please, Sign In to add comment