SHARE
TWEET

A5-V11 LEDE

a guest Feb 12th, 2018 280 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 4.4.61 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3102-0224e32) ) #0 Sat Apr 15 16:13:45 2017
  2. [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
  3. [    0.000000] bootconsole [early0] enabled
  4. [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
  5. [    0.000000] MIPS: machine is A5-V11
  6. [    0.000000] Determined physical RAM map:
  7. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  8. [    0.000000] Initrd not found or empty - disabling initrd
  9. [    0.000000] Zone ranges:
  10. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
  11. [    0.000000] Movable zone start for each node
  12. [    0.000000] Early memory node ranges
  13. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
  14. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
  15. [    0.000000] On node 0 totalpages: 8192
  16. [    0.000000] free_area_init_node: node 0, pgdat 80334490, node_mem_map 81000000
  17. [    0.000000]   Normal zone: 64 pages used for memmap
  18. [    0.000000]   Normal zone: 0 pages reserved
  19. [    0.000000]   Normal zone: 8192 pages, LIFO batch:0
  20. [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  21. [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  22. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [    0.000000] pcpu-alloc: [0] 0
  24. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  25. [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  26. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  27. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  28. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  29. [    0.000000] Writing ErrCtl register=00069fd0
  30. [    0.000000] Readback ErrCtl register=00069fd0
  31. [    0.000000] Memory: 28612K/32768K available (2888K kernel code, 136K rwdata, 356K rodata, 196K init, 196K bss, 4156K reserved, 0K cma-reserved)
  32. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [    0.000000] NR_IRQS:256
  34. [    0.000000] CPU Clock: 360MHz
  35. [    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
  36. [    0.000000] systick: running - mult: 214748, shift: 32
  37. [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10618113593 ns
  38. [    0.000015] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 11930464253ns
  39. [    0.015682] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
  40. [    0.090885] pid_max: default: 32768 minimum: 301
  41. [    0.100300] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [    0.113376] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [    0.136774] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  44. [    0.156350] futex hash table entries: 256 (order: -1, 3072 bytes)
  45. [    0.168555] pinctrl core: initialized pinctrl subsystem
  46. [    0.181388] NET: Registered protocol family 16
  47. [    0.200334] Can't analyze schedule() prologue at 8000ac9c
  48. [    0.242018] rt2880_gpio 10000600.gpio: registering 22 gpios
  49. [    0.253146] rt2880_gpio 10000600.gpio: registering 22 irq handlers
  50. [    0.265842] rt2880_gpio 10000660.gpio: registering 6 gpios
  51. [    0.276780] rt2880_gpio 10000660.gpio: registering 6 irq handlers
  52. [    0.291440] clocksource: Switched to clocksource MIPS
  53. [    0.303713] NET: Registered protocol family 2
  54. [    0.314349] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  55. [    0.328239] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  56. [    0.340821] TCP: Hash tables configured (established 1024 bind 1024)
  57. [    0.353681] UDP hash table entries: 256 (order: 0, 4096 bytes)
  58. [    0.365299] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  59. [    0.378266] NET: Registered protocol family 1
  60. [    0.397345] rt-timer 10000100.timer: maximum frequency is 3662Hz
  61. [    0.410814] Crashlog allocated RAM at address 0x1f00000
  62. [    0.456875] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  63. [    0.468468] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  64. [    0.494145] io scheduler noop registered
  65. [    0.501921] io scheduler deadline registered (default)
  66. [    0.512477] ralink-usb-phy usbphy: invalid resource
  67. [    0.523571] gpio-export gpio_export: 2 gpio(s) exported
  68. [    0.534376] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  69. [    0.553968] console [ttyS0] disabled
  70. [    0.561017] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
  71. [    0.580843] console [ttyS0] enabled
  72. [    0.594614] bootconsole [early0] disabled
  73. [    0.626205] spi spi0.0: force spi mode3
  74. [    0.634862] m25p80 spi0.0: pm25lq032 (4096 Kbytes)
  75. [    0.644611] 4 ofpart partitions found on MTD device spi0.0
  76. [    0.655595] Creating 4 MTD partitions on "spi0.0":
  77. [    0.665207] 0x000000000000-0x000000030000 : "u-boot"
  78. [    0.678837] 0x000000030000-0x000000040000 : "u-boot-env"
  79. [    0.693577] 0x000000040000-0x000000050000 : "factory"
  80. [    0.707669] 0x000000050000-0x000000400000 : "firmware"
  81. [    1.014223] 2 uimage-fw partitions found on MTD device firmware
  82. [    1.026159] 0x000000050000-0x00000016af62 : "kernel"
  83. [    1.039363] 0x00000016af62-0x000000400000 : "rootfs"
  84. [    1.053301] mtd: device 5 (rootfs) set to be root filesystem
  85. [    1.064919] 1 squashfs-split partitions found on MTD device rootfs
  86. [    1.077339] 0x00000039b000-0x000000400000 : "rootfs_data"
  87. [    1.098379] rt3050-esw 10110000.esw: link changed 0x00
  88. [    1.112406] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  89. [    1.130045] rt2880_wdt 10000120.watchdog: Initialized
  90. [    1.142958] NET: Registered protocol family 10
  91. [    1.160121] NET: Registered protocol family 17
  92. [    1.169338] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  93. [    1.194586] 8021q: 802.1Q VLAN Support v1.8
  94. [    1.222761] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  95. [    1.239026] Freeing unused kernel memory: 196K (8034f000 - 80380000)
  96. [    3.630632] init: Console is alive
  97. [    3.638211] init: - watchdog -
  98. [    6.509952] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  99. [    6.675361] usbcore: registered new interface driver usbfs
  100. [    6.686748] usbcore: registered new interface driver hub
  101. [    6.697764] usbcore: registered new device driver usb
  102. [    6.775660] SCSI subsystem initialized
  103. [    6.794828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  104. [    6.810993] ehci-platform: EHCI generic platform driver
  105. [    6.832174] phy phy-usbphy.0: remote usb device wakeup disabled
  106. [    6.844052] phy phy-usbphy.0: UTMI 16bit 30MHz
  107. [    6.853040] ehci-platform 101c0000.ehci: EHCI Host Controller
  108. [    6.864661] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  109. [    6.880804] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  110. [    6.911575] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  111. [    6.926411] hub 1-0:1.0: USB hub found
  112. [    6.935122] hub 1-0:1.0: 1 port detected
  113. [    6.948694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  114. [    6.963920] ohci-platform: OHCI generic platform driver
  115. [    6.974984] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  116. [    6.988765] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  117. [    7.004875] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  118. [    7.077552] hub 2-0:1.0: USB hub found
  119. [    7.086169] hub 2-0:1.0: 1 port detected
  120. [    7.107060] usbcore: registered new interface driver usb-storage
  121. [    7.120636] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  122. [    7.146091] init: - preinit -
  123. [    7.445844] usb 1-1: new high-speed USB device number 2 using ehci-platform
  124. [    7.936509] random: procd: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
  125. [    7.955683] usb-storage 1-1:1.0: USB Mass Storage device detected
  126. [    7.987845] scsi host0: usb-storage 1-1:1.0
  127. [    8.454737] rt3050-esw 10110000.esw: link changed 0x00
  128. [   10.700597] rt3050-esw 10110000.esw: link changed 0x01
  129. [   12.002778] mount_root: loading kmods from internal overlay
  130. [   12.060628] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  131. [   12.078761] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  132. [   14.308187] jffs2: notice: (369) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  133. [   14.340678] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  134. [   14.367990] block: extroot: not configured
  135. [   14.451766] jffs2: notice: (366) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  136. [   16.126491] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  137. [   16.152584] block: extroot: not configured
  138. [   16.163205] mount_root: switching to jffs2 overlay
  139. [   16.189165] urandom-seed: Seeding with /etc/urandom.seed
  140. [   16.411723] procd: - early -
  141. [   16.417785] procd: - watchdog -
  142. [   17.338402] procd: - ubus -
  143. [   17.414582] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  144. [   17.451124] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  145. [   17.493650] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  146. [   17.538846] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  147. [   17.564886] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  148. [   17.583709] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  149. [   17.602481] random: ubusd: uninitialized urandom read (4 bytes read, 31 bits of entropy available)
  150. [   17.622613] procd: - init -
  151. [   18.178881] kmodloader: loading kernel modules from /etc/modules.d/*
  152. [   18.287693] loop: module loaded
  153. [   18.321836] ip6_tables: (C) 2000-2006 Netfilter Core Team
  154. [   18.372067] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  155. [   18.388182] Backport generated by backports.git backports-20160324-13-g24da7d3c
  156. [   18.572071] batman_adv: B.A.T.M.A.N. advanced 2016.5 (compatibility version 15) loaded
  157. [   18.621186] ip_tables: (C) 2000-2006 Netfilter Core Team
  158. [   18.781726] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
  159. [   18.983090] xt_time: kernel timezone is -0000
  160. [   19.076565] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
  161. [   19.091144] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
  162. [   19.106695] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
  163. [   19.122023] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  164. [   19.203603] kmodloader: done loading kernel modules from /etc/modules.d/*
  165. [   21.303836] random: jshn: uninitialized urandom read (4 bytes read, 37 bits of entropy available)
  166. [   21.342424] random: ubusd: uninitialized urandom read (4 bytes read, 37 bits of entropy available)
  167. [   23.365876] rt3050-esw 10110000.esw: link changed 0x00
  168. [   25.119518] rt3050-esw 10110000.esw: link changed 0x01
  169. [   30.371641] usb 1-1: reset high-speed USB device number 2 using ehci-platform
  170. [   31.013623] device eth0 entered promiscuous mode
  171. [   31.070065] br-lan: port 1(eth0) entered forwarding state
  172. [   31.081065] br-lan: port 1(eth0) entered forwarding state
  173. [   33.071562] br-lan: port 1(eth0) entered forwarding state
  174. [   35.780932] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  175. [   35.840340] device wlan0 entered promiscuous mode
  176. [   35.925204] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  177. [   35.938407] br-lan: port 2(wlan0) entered forwarding state
  178. [   35.949578] br-lan: port 2(wlan0) entered forwarding state
  179. [   37.941472] br-lan: port 2(wlan0) entered forwarding state
  180. [   68.371523] random: nonblocking pool is initialized
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top