API tools faq
paste
Advertisement
Guest User

WRTNode 2P HW Bug

a guest
Jul 1st, 2017
176
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.65 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.3 (May 19 2015 - 21:33:48)
  2.  
  3. Board: Ralink APSoC DRAM: 128 MB
  4. relocate_code Pointer at: 87fb8000
  5. flash manufacture id: c2, device id 20 18
  6. find flash: MX25L12805D
  7. ============================================
  8. Ralink UBoot Version: 4.3.0.0
  9. --------------------------------------------
  10. ASIC 7628_MP (Port5<->None)
  11. DRAM component: 1024 Mbits DDR, width 16
  12. DRAM bus: 16 bit
  13. Total memory: 128 MBytes
  14. Flash component: SPI Flash
  15. Date:May 19 2015 Time:21:33:48
  16. ============================================
  17. icache: sets:512, ways:4, linesz:32 ,total:65536
  18. dcache: sets:256, ways:4, linesz:32 ,total:32768
  19.  
  20. ##### The CPU freq = 575 MHZ ####
  21. estimate memory size =128 Mbytes
  22. RESET MT7628 PHY!!!!!!
  23. Please choose the operation:
  24. 1: Load system code to SDRAM via TFTP.
  25. 2: Load system code then write to Flash via TFTP.
  26. 3: Boot system code via Flash (default).
  27. 4: Entr boot command line interface.
  28. 7: Load Boot Loader code then write to Flash via Serial.
  29. 9: Load Boot Loader code then write to Flash via TFTP. 0
  30.  
  31. 3: System Boot system code via Flash.
  32. ## Booting image at bc050000 ...
  33. Image Name: MIPS LEDE Linux-4.4.70
  34. Image Type: MIPS Linux Kernel Image (lzma compressed)
  35. Data Size: 1185760 Bytes = 1.1 MB
  36. Load Address: 80000000
  37. Entry Point: 80000000
  38. Verifying Checksum ... OK
  39. Uncompressing Kernel Image ... OK
  40. No initrd
  41. ## Transferring control to Linux (at address 80000000) ...
  42. ## Giving linux memsize in MB, 128
  43.  
  44. Starting kernel ...
  45.  
  46. [ 0.000000] Linux version 4.4.70 (nicolo@nicolo-VirtualBox) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4298-aabcc80) ) #0 Fri Jun 2 09:46:29 2017
  47. [ 0.000000] Board has DDR2
  48. [ 0.000000] Analog PMU set to hw control
  49. [ 0.000000] Digital PMU set to hw control
  50. [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
  51. [ 0.000000] bootconsole [early0] enabled
  52. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  53. [ 0.000000] MIPS: machine is WRTnode2P
  54. [ 0.000000] Determined physical RAM map:
  55. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  56. [ 0.000000] Initrd not found or empty - disabling initrd
  57. [ 0.000000] Zone ranges:
  58. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  59. [ 0.000000] Movable zone start for each node
  60. [ 0.000000] Early memory node ranges
  61. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  62. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  63. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  64. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  65. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  66. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  67. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  68. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  69. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  70. [ 0.000000] Writing ErrCtl register=0007b288
  71. [ 0.000000] Readback ErrCtl register=0007b288
  72. [ 0.000000] Memory: 126008K/131072K available (2696K kernel code, 132K rwdata, 668K rodata, 144K init, 189K bss, 5064K reserved, 0K cma-reserved)
  73. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  74. [ 0.000000] NR_IRQS:256
  75. [ 0.000000] intc: using register map from devicetree
  76. [ 0.000000] CPU Clock: 575MHz
  77. [ 0.000000] clocksource_probe: no matching clocksources found
  78. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6647862422 ns
  79. [ 0.000011] sched_clock: 32 bits at 287MHz, resolution 3ns, wraps every 7469508094ns
  80. [ 0.007520] Calibrating delay loop... 380.92 BogoMIPS (lpj=1904640)
  81. [ 0.069998] pid_max: default: 32768 minimum: 301
  82. [ 0.074596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  83. [ 0.080938] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  84. [ 0.094299] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  85. [ 0.103803] futex hash table entries: 256 (order: -1, 3072 bytes)
  86. [ 0.109822] pinctrl core: initialized pinctrl subsystem
  87. [ 0.115586] NET: Registered protocol family 16
  88. [ 0.230965] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
  89. [ 0.385626] PCI host bridge /pcie@10140000 ranges:
  90. [ 0.390210] MEM 0x0000000020000000..0x000000002fffffff
  91. [ 0.395231] IO 0x0000000010160000..0x000000001016ffff
  92. [ 0.408490] mt7621_gpio 10000600.gpio: registering 32 gpios
  93. [ 0.414056] mt7621_gpio 10000600.gpio: registering 32 gpios
  94. [ 0.419490] mt7621_gpio 10000600.gpio: registering 32 gpios
  95. [ 0.425768] PCI host bridge to bus 0000:00
  96. [ 0.429679] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
  97. [ 0.436365] pci_bus 0000:00: root bus resource [io 0xffffffff]
  98. [ 0.442024] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  99. [ 0.448585] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  100. [ 0.456717] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  101. [ 0.465270] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  102. [ 0.471602] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  103. [ 0.478371] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  104. [ 0.484876] pci 0000:00:00.0: BAR 1: assigned [mem 0x20100000-0x2010ffff]
  105. [ 0.491456] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x20001fff 64bit]
  106. [ 0.498506] pci 0000:00:00.0: PCI bridge to [bus 01]
  107. [ 0.503287] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
  108. [ 0.509840] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
  109. [ 0.515471] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
  110. [ 0.522102] clocksource: Switched to clocksource MIPS
  111. [ 0.528541] NET: Registered protocol family 2
  112. [ 0.533650] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  113. [ 0.540341] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  114. [ 0.546523] TCP: Hash tables configured (established 1024 bind 1024)
  115. [ 0.552727] UDP hash table entries: 256 (order: 0, 4096 bytes)
  116. [ 0.558329] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  117. [ 0.564659] NET: Registered protocol family 1
  118. [ 0.574652] Crashlog allocated RAM at address 0x3f00000
  119. [ 0.595831] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  120. [ 0.601419] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  121. [ 0.613770] io scheduler noop registered
  122. [ 0.617508] io scheduler deadline registered (default)
  123. [ 0.623481] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  124. [ 0.630929] console [ttyS0] disabled
  125. [ 0.634417] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  126. [ 0.643133] console [ttyS0] enabled
  127. [ 0.643133] console [ttyS0] enabled
  128. [ 0.650135] bootconsole [early0] disabled
  129. [ 0.650135] bootconsole [early0] disabled
  130. [ 0.659956] spi-mt7621 10000b00.spi: sys_freq: 191666666
  131. [ 0.669276] m25p80 spi32766.0: using chunked io (size=32)
  132. [ 0.674842] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
  133. [ 0.680350] 4 ofpart partitions found on MTD device spi32766.0
  134. [ 0.686277] Creating 4 MTD partitions on "spi32766.0":
  135. [ 0.691493] 0x000000000000-0x000000030000 : "u-boot"
  136. [ 0.698339] 0x000000030000-0x000000040000 : "u-boot-env"
  137. [ 0.705663] 0x000000040000-0x000000050000 : "factory"
  138. [ 0.712710] 0x000000050000-0x000002000000 : "firmware"
  139. [ 0.717936] mtd: partition "firmware" extends beyond the end of device "spi32766.0" -- size truncated to 0xfb0000
  140. [ 0.790038] 2 uimage-fw partitions found on MTD device firmware
  141. [ 0.796092] 0x000000050000-0x000000171820 : "kernel"
  142. [ 0.802863] 0x000000171820-0x000001000000 : "rootfs"
  143. [ 0.809744] mtd: device 5 (rootfs) set to be root filesystem
  144. [ 0.815674] 1 squashfs-split partitions found on MTD device rootfs
  145. [ 0.821955] 0x000000c10000-0x000001000000 : "rootfs_data"
  146. [ 0.839093] rt3050-esw 10110000.esw: link changed 0x00
  147. [ 0.846868] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  148. [ 0.855843] mt7621_wdt 10000120.watchdog: Initialized
  149. [ 0.861648] NET: Registered protocol family 17
  150. [ 0.866312] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  151. [ 0.879132] 8021q: 802.1Q VLAN Support v1.8
  152. [ 0.893877] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  153. [ 0.901831] Freeing unused kernel memory: 144K (8036c000 - 80390000)
  154. [ 2.476111] init: Console is alive
  155. [ 2.479782] init: - watchdog -
  156. [ 5.402892] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  157. [ 5.535125] usbcore: registered new interface driver usbfs
  158. [ 5.540828] usbcore: registered new interface driver hub
  159. [ 5.546394] usbcore: registered new device driver usb
  160. [ 5.558017] exFAT: Version 1.2.9
  161. [ 5.595756] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  162. [ 5.612478] SCSI subsystem initialized
  163. [ 5.621521] ehci-platform: EHCI generic platform driver
  164. [ 5.637163] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
  165. [ 5.643982] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
  166. [ 5.649312] ehci-platform 101c0000.ehci: EHCI Host Controller
  167. [ 5.655185] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  168. [ 5.663355] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  169. [ 5.682155] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  170. [ 5.689675] hub 1-0:1.0: USB hub found
  171. [ 5.693968] hub 1-0:1.0: 1 port detected
  172. [ 5.701393] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  173. [ 5.709359] ohci-platform: OHCI generic platform driver
  174. [ 5.714997] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  175. [ 5.721946] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  176. [ 5.730097] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  177. [ 5.797369] hub 2-0:1.0: USB hub found
  178. [ 5.801559] hub 2-0:1.0: 1 port detected
  179. [ 5.818948] MTK MSDC device init.
  180. [ 5.862282] mtk-sd: MediaTek MT6575 MSDC Driver
  181. [ 5.872606] sdhci: Secure Digital Host Controller Interface driver
  182. [ 5.878898] sdhci: Copyright(c) Pierre Ossman
  183. [ 5.884949] sdhci-pltfm: SDHCI platform and OF driver helper
  184. [ 5.896544] usbcore: registered new interface driver usb-storage
  185. [ 5.908335] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  186. [ 5.926190] init: - preinit -
  187. [ 6.228455] mmc0: new high speed SD card at address 6bd4
  188. [ 6.241678] mmcblk0: mmc0:6bd4 SD02G 1.83 GiB
  189. [ 6.545098] mmcblk0: p1
  190. [ 6.549136] random: procd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
  191. [ 7.306951] rt3050-esw 10110000.esw: link changed 0x00
  192. Press the [f] key and hit [enter] to enter failsafe mode
  193. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  194. [ 9.635381] mount_root: loading kmods from internal overlay
  195. [ 9.666055] kmodloader: loading kernel modules from //etc/modules-boot.d/*
  196. [ 9.675096] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
  197. [ 10.185016] jffs2: notice: (371) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  198. [ 10.201410] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  199. [ 10.214362] block: extroot: not configured
  200. [ 10.317068] jffs2: notice: (368) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  201. [ 10.745176] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  202. [ 10.756591] block: extroot: not configured
  203. [ 10.761863] mount_root: switching to jffs2 overlay
  204. [ 10.793852] urandom-seed: Seeding with /etc/urandom.seed
  205. [ 10.930263] procd: - early -
  206. [ 10.934065] procd: - watchdog -
  207. [ 11.653960] procd: - ubus -
  208. [ 11.755696] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  209. [ 11.768642] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  210. [ 11.778381] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  211. [ 11.787618] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  212. [ 11.797072] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  213. [ 11.806275] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  214. [ 11.816406] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  215. [ 11.825778] random: ubusd: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
  216. [ 11.835382] procd: - init -
  217. Please press Enter to activate this console.
  218. [ 12.218799] kmodloader: loading kernel modules from /etc/modules.d/*
  219. [ 12.255148] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  220. [ 12.320620] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  221. [ 12.328816] Backport generated by backports.git backports-20160324-13-g24da7d3c
  222. [ 12.396971] i2c /dev entries driver
  223. [ 12.404817] mt76_wmac 10300000.wmac: ASIC revision: 76280001
  224. [ 12.510798] mt76_wmac 10300000.wmac: Firmware Version: _e2_mp
  225. [ 12.516682] mt76_wmac 10300000.wmac: Build Time: 20150211175503
  226. [ 12.542119] firmware init done
  227. [ 12.965939] i2c-mt7621 10000900.i2c: clock 100KHz, re-start not support
  228. [ 12.997713] Intel(R) Wireless WiFi driver for Linux
  229. [ 13.002741] Copyright(c) 2003- 2015 Intel Corporation
  230. [ 13.008461] iwlwifi 0000:01:00.0: pci_enable_msi failed - -89
  231. [ 13.026659] nf_conntrack version 0.5.0 (1971 buckets, 7884 max)
  232. [ 13.137292] usbcore: registered new interface driver ums-alauda
  233. [ 13.146100] usbcore: registered new interface driver ums-cypress
  234. [ 13.394700] usbcore: registered new interface driver ums-datafab
  235. [ 13.403432] usbcore: registered new interface driver ums-freecom
  236. [ 13.412355] usbcore: registered new interface driver ums-isd200
  237. [ 13.421209] usbcore: registered new interface driver ums-jumpshot
  238. [ 13.438920] usbcore: registered new interface driver ums-karma
  239. [ 13.452459] usbcore: registered new interface driver ums-sddr09
  240. [ 13.535530] usbcore: registered new interface driver ums-sddr55
  241. [ 13.544702] usbcore: registered new interface driver ums-usbat
  242. [ 13.573787] xt_time: kernel timezone is -0000
  243. [ 13.580996] ip_tables: (C) 2000-2006 Netfilter Core Team
  244. [ 13.655648] PPP generic driver version 2.4.2
  245. [ 13.890338] NET: Registered protocol family 24
  246. [ 13.914470] kmodloader: done loading kernel modules from /etc/modules.d/*
  247. [ 14.355392] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
  248. [ 14.363333] iwlwifi 0000:01:00.0: CPTCFG_IWLWIFI_DEBUG disabled
  249. [ 14.369343] iwlwifi 0000:01:00.0: CPTCFG_IWLWIFI_DEBUGFS disabled
  250. [ 14.375553] iwlwifi 0000:01:00.0: CPTCFG_IWLWIFI_DEVICE_TRACING disabled
  251. [ 14.382368] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 2200 BGN, REV=0x104
  252. [ 14.399091] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
  253. [ 15.308254] random: jshn: uninitialized urandom read (4 bytes read, 29 bits of entropy available)
  254. [ 22.994589] device eth0.1 entered promiscuous mode
  255. [ 22.999469] device eth0 entered promiscuous mode
  256. [ 23.017342] br-lan: port 1(eth0.1) entered forwarding state
  257. [ 23.023111] br-lan: port 1(eth0.1) entered forwarding state
  258. [ 25.022177] br-lan: port 1(eth0.1) entered forwarding state
  259.  
  260.  
  261.  
  262.  
  263. BusyBox v1.26.2 () built-in shell (ash)
  264.  
  265. _________
  266. / /\ _ ___ ___ ___
  267. / LE / \ | | | __| \| __|
  268. / DE / \ | |__| _|| |) | _|
  269. /________/ LE \ |____|___|___/|___| lede-project.org
  270. \ \ DE /
  271. \ LE \ / -----------------------------------------------------------
  272. \ DE \ / Reboot (SNAPSHOT, r4297-1893b56)
  273. \________\/ -----------------------------------------------------------
  274.  
  275. === WARNING! =====================================
  276. There is no root password defined on this device!
  277. Use the "passwd" command to set up a new password
  278. in order to prevent unauthorized SSH logins.
  279. --------------------------------------------------
  280. root@LEDE:/#
  281. root@LEDE:/#
  282. root@LEDE:/#
  283. root@LEDE:/# ls /dev/
  284. bus mtd3ro port
  285. console mtd4 ppp
  286. cpu_dma_latency mtd4ro ptmx
  287. full mtd5 pts
  288. i2c-0 mtd5ro random
  289. kmsg mtd6 shm
  290. log mtd6ro snd
  291. memory_bandwidth mtdblock0 tty
  292. mmcblk0 mtdblock1 ttyS0
  293. mmcblk0p1 mtdblock2 ttyS1
  294. mtd0 mtdblock3 ttyS2
  295. mtd0ro mtdblock4 urandom
  296. mtd1 mtdblock5 watchdog
  297. mtd1ro mtdblock6 watchdog0
  298. mtd2 network_latency zero
  299. mtd2ro network_throughput
  300. mtd3 null
  301. root@LEDE:/# mount
  302. /dev/root on /rom type squashfs (ro,relatime)
  303. proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
  304. sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
  305. tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
  306. /dev/mtdblock6 on /overlay type jffs2 (rw,noatime)
  307. overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
  308. tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
  309. devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
  310. debugfs on /sys/kernel/debug type debugfs (rw,noatime)
  311. root@LEDE:/# mount[ 73.442152] random: nonblocking pool is initialized
  312.  
  313. /dev/root on /rom type squashfs (ro,relatime)
  314. proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
  315. sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
  316. tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
  317. /dev/mtdblock6 on /overlay type jffs2 (rw,noatime)
  318. overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
  319. tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
  320. devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
  321. debugfs on /sys/kernel/debug type debugfs (rw,noatime)
  322. root@LEDE:/#
  323. root@LEDE:/#
  324. root@LEDE:/# mount /dev/mmcblk0p1 /mnt/
  325. [ 84.920567] [EXFAT] trying to mount...
  326. [ 84.924966] [EXFAT] mounted successfully
  327. root@LEDE:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!