Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
- ============================= Boot Info Summary: ===============================
- => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
- the same hard drive for core.img. core.img is at this location and looks
- for (,msdos3)/boot/grub. It also embeds following components:
- modules
- ---------------------------------------------------------------------------
- fshelp ext2 part_msdos biosdisk
- ---------------------------------------------------------------------------
- => Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
- sda1: __________________________________________________________________________
- File system: ntfs
- Boot sector type: Windows 8/2012: NTFS
- Boot sector info: No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /bootmgr /Windows/System32/winload.exe
- sda2: __________________________________________________________________________
- File system: ntfs
- Boot sector type: Windows 8/2012: NTFS
- Boot sector info: No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /bootmgr /Boot/BCD
- sda3: __________________________________________________________________________
- File system: ext4
- Boot sector type: -
- Boot sector info:
- Operating System: Linux Mint 19.3
- Boot files: /boot/grub/grub.cfg /etc/fstab
- /boot/grub/i386-pc/core.img
- sdb1: __________________________________________________________________________
- File system: vfat
- Boot sector type: SYSLINUX 6.03
- Boot sector info: Syslinux looks at sector 16408 of /dev/sdb1 for its
- second stage. The integrity check of Syslinux failed.
- No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /boot/grub/grub.cfg /syslinux.cfg
- /EFI/BOOT/grubx64.efi /ldlinux.sys
- ============================ Drive/Partition Info: =============================
- Drive: sda _____________________________________________________________________
- Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sda1 2,048 75,778,047 75,776,000 7 NTFS / exFAT / HPFS
- /dev/sda2 * 1,924,849,664 1,953,521,663 28,672,000 7 NTFS / exFAT / HPFS
- /dev/sda3 75,778,048 1,924,848,360 1,849,070,313 83 Linux
- Drive: sdb _____________________________________________________________________
- Disk /dev/sdb: 3.8 GiB, 4026531840 bytes, 7864320 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sdb1 * 2,048 7,864,319 7,862,272 c W95 FAT32 (LBA)
- "blkid" output: ________________________________________________________________
- Device UUID TYPE LABEL
- /dev/loop0 squashfs
- /dev/sda1 42101E86101E8159 ntfs
- /dev/sda2 7C08D65208D60B52 ntfs Recovery
- /dev/sda3 58e49172-4a13-4b8a-991c-b7ca7f180cbb ext4
- /dev/sdb1 5417-E85A vfat LINUX MINT
- ========================= "ls -l /dev/disk/by-id" output: ======================
- total 0
- lrwxrwxrwx 1 root root 9 Feb 19 19:54 ata-PLDS_DVD+_-RW_DS-8A8SH_YTVN95508122R41ALA00 -> ../../sr0
- lrwxrwxrwx 1 root root 9 Feb 19 19:55 ata-ST1000LM024_HN-M101MBB_S2TBJB0C220544 -> ../../sda
- lrwxrwxrwx 1 root root 10 Feb 19 20:07 ata-ST1000LM024_HN-M101MBB_S2TBJB0C220544-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 Feb 19 20:07 ata-ST1000LM024_HN-M101MBB_S2TBJB0C220544-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 Feb 19 19:55 ata-ST1000LM024_HN-M101MBB_S2TBJB0C220544-part3 -> ../../sda3
- lrwxrwxrwx 1 root root 9 Feb 19 20:11 usb-Generic-_Multi-Card_20090516388200000-0:0 -> ../../sdc
- lrwxrwxrwx 1 root root 9 Feb 19 19:55 usb-Generic_Flash_Disk_868F512E-0:0 -> ../../sdb
- lrwxrwxrwx 1 root root 10 Feb 19 19:55 usb-Generic_Flash_Disk_868F512E-0:0-part1 -> ../../sdb1
- lrwxrwxrwx 1 root root 9 Feb 19 19:55 wwn-0x50004cf206d98d85 -> ../../sda
- lrwxrwxrwx 1 root root 10 Feb 19 20:07 wwn-0x50004cf206d98d85-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 Feb 19 20:07 wwn-0x50004cf206d98d85-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 Feb 19 19:55 wwn-0x50004cf206d98d85-part3 -> ../../sda3
- ================================ Mount points: =================================
- Device Mount_Point Type Options
- /dev/fuse /root/.cache/doc fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
- /dev/loop0 /rofs squashfs (ro,noatime)
- /dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
- =========================== sda3/boot/grub/grub.cfg: ===========================
- --------------------------------------------------------------------------------
- #
- # DO NOT EDIT THIS FILE
- #
- # It is automatically generated by grub-mkconfig using templates
- # from /etc/grub.d and settings from /etc/default/grub
- #
- ### BEGIN /etc/grub.d/00_header ###
- if [ -s $prefix/grubenv ]; then
- set have_grubenv=true
- load_env
- fi
- if [ "${next_entry}" ] ; then
- set default="${next_entry}"
- set next_entry=
- save_env next_entry
- set boot_once=true
- else
- set default="0"
- fi
- if [ x"${feature_menuentry_id}" = xy ]; then
- menuentry_id_option="--id"
- else
- menuentry_id_option=""
- fi
- export menuentry_id_option
- if [ "${prev_saved_entry}" ]; then
- set saved_entry="${prev_saved_entry}"
- save_env saved_entry
- set prev_saved_entry=
- save_env prev_saved_entry
- set boot_once=true
- fi
- function savedefault {
- if [ -z "${boot_once}" ]; then
- saved_entry="${chosen}"
- save_env saved_entry
- fi
- }
- function recordfail {
- set recordfail=1
- if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
- }
- function load_video {
- if [ x$feature_all_video_module = xy ]; then
- insmod all_video
- else
- insmod efi_gop
- insmod efi_uga
- insmod ieee1275_fb
- insmod vbe
- insmod vga
- insmod video_bochs
- insmod video_cirrus
- fi
- }
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- if loadfont /boot/grub/fonts/UbuntuMono16.pf2 ; then
- set gfxmode=auto
- load_video
- insmod gfxterm
- set locale_dir=$prefix/locale
- set lang=en_US
- insmod gettext
- fi
- terminal_output gfxterm
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- insmod gfxmenu
- insmod png
- set theme=($root)/boot/grub/themes/linuxmint/theme.txt
- export theme
- if [ "${recordfail}" = 1 ] ; then
- set timeout=10
- else
- if [ x$feature_timeout_style = xy ] ; then
- set timeout_style=hidden
- set timeout=10
- # Fallback hidden-timeout code in case the timeout_style feature is
- # unavailable.
- elif sleep --interruptible 10 ; then
- set timeout=10
- fi
- fi
- ### END /etc/grub.d/00_header ###
- ### BEGIN /etc/grub.d/05_debian_theme ###
- set menu_color_normal=white/black
- set menu_color_highlight=black/light-gray
- ### END /etc/grub.d/05_debian_theme ###
- ### BEGIN /etc/grub.d/10_linux ###
- function gfxmode {
- set gfxpayload="${1}"
- if [ "${1}" = "keep" ]; then
- set vt_handoff=vt.handoff=1
- else
- set vt_handoff=
- fi
- }
- if [ "${recordfail}" != 1 ]; then
- if [ -e ${prefix}/gfxblacklist.txt ]; then
- if hwmatch ${prefix}/gfxblacklist.txt 3; then
- if [ ${match} = 0 ]; then
- set linux_gfx_mode=keep
- else
- set linux_gfx_mode=text
- fi
- else
- set linux_gfx_mode=text
- fi
- else
- set linux_gfx_mode=keep
- fi
- else
- set linux_gfx_mode=text
- fi
- export linux_gfx_mode
- menuentry 'Linux Mint 19.3 Xfce' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- linux /boot/vmlinuz-5.3.0-26-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro quiet splash $vt_handoff
- initrd /boot/initrd.img-5.3.0-26-generic
- }
- submenu 'Advanced options for Linux Mint 19.3 Xfce' $menuentry_id_option 'gnulinux-advanced-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- menuentry 'Linux Mint 19.3 Xfce, with Linux 5.3.0-26-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-26-generic-advanced-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 5.3.0-26-generic ...'
- linux /boot/vmlinuz-5.3.0-26-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro quiet splash $vt_handoff
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-5.3.0-26-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 5.3.0-26-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-26-generic-recovery-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 5.3.0-26-generic ...'
- linux /boot/vmlinuz-5.3.0-26-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-5.3.0-26-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 5.0.0-37-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-37-generic-advanced-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 5.0.0-37-generic ...'
- linux /boot/vmlinuz-5.0.0-37-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro quiet splash $vt_handoff
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-5.0.0-37-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 5.0.0-37-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-37-generic-recovery-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 5.0.0-37-generic ...'
- linux /boot/vmlinuz-5.0.0-37-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-5.0.0-37-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 5.0.0-32-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-32-generic-advanced-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 5.0.0-32-generic ...'
- linux /boot/vmlinuz-5.0.0-32-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro quiet splash $vt_handoff
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-5.0.0-32-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 5.0.0-32-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.0.0-32-generic-recovery-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 5.0.0-32-generic ...'
- linux /boot/vmlinuz-5.0.0-32-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-5.0.0-32-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 4.15.0-74-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-74-generic-advanced-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 4.15.0-74-generic ...'
- linux /boot/vmlinuz-4.15.0-74-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro quiet splash $vt_handoff
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-4.15.0-74-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 4.15.0-74-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-74-generic-recovery-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 4.15.0-74-generic ...'
- linux /boot/vmlinuz-4.15.0-74-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-4.15.0-74-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 4.15.0-54-generic' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-54-generic-advanced-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 4.15.0-54-generic ...'
- linux /boot/vmlinuz-4.15.0-54-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro quiet splash $vt_handoff
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-4.15.0-54-generic
- }
- menuentry 'Linux Mint 19.3 Xfce, with Linux 4.15.0-54-generic (recovery mode)' --class linuxmint --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-54-generic-recovery-58e49172-4a13-4b8a-991c-b7ca7f180cbb' {
- recordfail
- load_video
- insmod gzio
- if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- echo 'Loading Linux 4.15.0-54-generic ...'
- linux /boot/vmlinuz-4.15.0-54-generic root=UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-4.15.0-54-generic
- }
- }
- ### END /etc/grub.d/10_linux ###
- ### BEGIN /etc/grub.d/20_linux_xen ###
- ### END /etc/grub.d/20_linux_xen ###
- ### BEGIN /etc/grub.d/20_memtest86+ ###
- menuentry 'Memory test (memtest86+)' {
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- knetbsd /boot/memtest86+.elf
- }
- menuentry 'Memory test (memtest86+, serial console 115200)' {
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos3'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- else
- search --no-floppy --fs-uuid --set=root 58e49172-4a13-4b8a-991c-b7ca7f180cbb
- fi
- linux16 /boot/memtest86+.bin console=ttyS0,115200n8
- }
- ### END /etc/grub.d/20_memtest86+ ###
- ### BEGIN /etc/grub.d/30_os-prober ###
- menuentry 'Windows 10 (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7C08D65208D60B52' {
- insmod part_msdos
- insmod ntfs
- set root='hd0,msdos2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7C08D65208D60B52
- else
- search --no-floppy --fs-uuid --set=root 7C08D65208D60B52
- fi
- parttool ${root} hidden-
- drivemap -s (hd0) ${root}
- chainloader +1
- }
- set timeout_style=menu
- if [ "${timeout}" = 0 ]; then
- set timeout=10
- fi
- ### END /etc/grub.d/30_os-prober ###
- ### BEGIN /etc/grub.d/30_uefi-firmware ###
- ### END /etc/grub.d/30_uefi-firmware ###
- ### BEGIN /etc/grub.d/40_custom ###
- # This file provides an easy way to add custom menu entries. Simply type the
- # menu entries you want to add after this comment. Be careful not to change
- # the 'exec tail' line above.
- ### END /etc/grub.d/40_custom ###
- ### BEGIN /etc/grub.d/41_custom ###
- if [ -f ${config_directory}/custom.cfg ]; then
- source ${config_directory}/custom.cfg
- elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
- source $prefix/custom.cfg;
- fi
- ### END /etc/grub.d/41_custom ###
- --------------------------------------------------------------------------------
- =============================== sda3/etc/fstab: ================================
- --------------------------------------------------------------------------------
- # /etc/fstab: static file system information.
- #
- # Use 'blkid' to print the universally unique identifier for a
- # device; this may be used with UUID= as a more robust way to name devices
- # that works even if disks are added and removed. See fstab(5).
- #
- # <file system> <mount point> <type> <options> <dump> <pass>
- # / was on /dev/sda3 during installation
- UUID=58e49172-4a13-4b8a-991c-b7ca7f180cbb / ext4 errors=remount-ro 0 1
- /swapfile none swap sw 0 0
- --------------------------------------------------------------------------------
- =================== sda3: Location of files loaded by Grub: ====================
- GiB - GB File Fragment(s)
- 418.263378143 = 449.106882560 boot/grub/grub.cfg 1
- 858.283710480 = 921.575116800 boot/grub/i386-pc/core.img 1
- 418.273254395 = 449.117487104 boot/vmlinuz-4.15.0-54-generic 1
- 441.067359924 = 473.592471552 boot/vmlinuz-4.15.0-74-generic 2
- 53.790390015 = 57.756991488 boot/vmlinuz-5.0.0-32-generic 1
- 38.696655273 = 41.550217216 boot/vmlinuz-5.0.0-37-generic 2
- 502.392307281 = 539.439632384 boot/vmlinuz-5.3.0-26-generic 1
- 502.392307281 = 539.439632384 vmlinuz 1
- 441.067359924 = 473.592471552 vmlinuz.old 2
- 53.635990143 = 57.591205888 boot/initrd.img-4.15.0-54-generic 1
- 441.610347748 = 474.175500288 boot/initrd.img-4.15.0-74-generic 7
- 42.228519440 = 45.342527488 boot/initrd.img-5.0.0-32-generic 3
- 54.016376495 = 57.999642624 boot/initrd.img-5.0.0-37-generic 7
- 870.783866882 = 934.997057536 boot/initrd.img-5.3.0-26-generic 3
- 870.783866882 = 934.997057536 initrd.img 3
- 441.610347748 = 474.175500288 initrd.img.old 7
- =========================== sdb1/boot/grub/grub.cfg: ===========================
- --------------------------------------------------------------------------------
- if loadfont /boot/grub/font.pf2 ; then
- set gfxmode=auto
- insmod efi_gop
- insmod efi_uga
- insmod gfxterm
- terminal_output gfxterm
- set theme=/boot/grub/themes/linuxmint/theme.txt
- fi
- set menu_color_normal=white/black
- set menu_color_highlight=black/light-gray
- menuentry "Start Linux Mint 19.3 Xfce 64-bit" --class linuxmint {
- set gfxpayload=keep
- linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} quiet splash --
- initrd /casper/initrd.lz
- }
- menuentry "Start Linux Mint 19.3 Xfce 64-bit (compatibility mode)" {
- linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper xforcevesa iso-scan/filename=${iso_path} ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll --
- initrd /casper/initrd.lz
- }
- menuentry "OEM install (for manufacturers)" {
- set gfxpayload=keep
- linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed oem-config/enable=true only-ubiquity boot=casper iso-scan/filename=${iso_path} quiet splash --
- initrd /casper/initrd.lz
- }
- menuentry "Check the integrity of the medium" {
- linux /casper/vmlinuz boot=casper integrity-check iso-scan/filename=${iso_path} quiet splash --
- initrd /casper/initrd.lz
- }
- --------------------------------------------------------------------------------
- ============================== sdb1/syslinux.cfg: ==============================
- --------------------------------------------------------------------------------
- DEFAULT loadconfig
- LABEL loadconfig
- CONFIG /isolinux/isolinux.cfg
- APPEND /isolinux/
- --------------------------------------------------------------------------------
- =================== sdb1: Location of files loaded by Grub: ====================
- GiB - GB File Fragment(s)
- ?? = ?? boot/grub/grub.cfg 1
- ================= sdb1: Location of files loaded by Syslinux: ==================
- GiB - GB File Fragment(s)
- ?? = ?? syslinux.cfg 1
- ?? = ?? ldlinux.sys 1
- ========= Devices which don't seem to have a corresponding hard drive: =========
- sdc
- =============================== StdErr Messages: ===============================
- File descriptor 9 (/proc/1845/mountinfo) leaked on lvs invocation. Parent PID 20663: bash
- File descriptor 63 (pipe:[43796]) leaked on lvs invocation. Parent PID 20663: bash
- ADDITIONAL INFORMATION :
- =================== log of boot-repair 20200219_1955 ===================
- boot-repair version : 4ppa65
- boot-sav version : 4ppa65
- boot-sav-extra version : 4ppa65
- glade2script version : 3.2.3~ppa4
- boot-repair is executed in live-session (Linux Mint 19.3 Tricia, tricia, LinuxMint, x86_64)
- CPU op-mode(s): 32-bit, 64-bit
- BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper initrd=/casper/initrd.lz quiet splash --
- ls: cannot access '/home/usr/.config': No such file or directory
- Windows is hibernated, refused to mount.
- The disk contains an unclean file system (0, 0).
- Metadata kept in Windows cache, refused to mount.
- Falling back to read-only mount because the NTFS partition is in an
- unsafe state. Please resume and shutdown Windows fully (no hibernation
- or fast restarting.)
- The disk contains an unclean file system (0, 0).
- Metadata kept in Windows cache, refused to mount.
- Falling back to read-only mount because the NTFS partition is in an
- unsafe state. Please resume and shutdown Windows fully (no hibernation
- or fast restarting.)
- =================== os-prober:
- /dev/sda2:Windows 10:Windows:chain
- /dev/sda3:Linux Mint 19.3 Tricia (19.3):LinuxMint:linux
- =================== blkid:
- /dev/sda1: UUID="42101E86101E8159" TYPE="ntfs" PARTUUID="83777da6-01"
- /dev/sda2: LABEL="Recovery" UUID="7C08D65208D60B52" TYPE="ntfs" PARTUUID="83777da6-02"
- /dev/sda3: UUID="58e49172-4a13-4b8a-991c-b7ca7f180cbb" TYPE="ext4" PARTUUID="83777da6-03"
- /dev/sdb1: LABEL="LINUX MINT" UUID="5417-E85A" TYPE="vfat" PARTUUID="0013e4a6-01"
- /dev/loop0: TYPE="squashfs"
- 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
- Windows not detected by os-prober on sda1.
- =================== sda3/etc/grub.d/ :
- drwxr-xr-x 2 root root 4096 Dec 6 08:54 grub.d
- total 80
- -rwxr-xr-x 1 root root 10046 Mar 18 2019 00_header
- -rwxr-xr-x 1 root root 6258 Mar 18 2019 05_debian_theme
- -rwxr-xr-x 1 root root 12693 Mar 18 2019 10_linux
- -rwxr-xr-x 1 root root 11298 Mar 18 2019 20_linux_xen
- -rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
- -rwxr-xr-x 1 root root 12059 Mar 18 2019 30_os-prober
- -rwxr-xr-x 1 root root 1418 Mar 18 2019 30_uefi-firmware
- -rwxr-xr-x 1 root root 214 Mar 18 2019 40_custom
- -rwxr-xr-x 1 root root 216 Mar 18 2019 41_custom
- -rw-r--r-- 1 root root 483 Mar 18 2019 README
- =================== sda3/etc/default/grub :
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- GRUB_TIMEOUT_STYLE=hidden
- GRUB_TIMEOUT=10
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
- =================== sda3recordfail=1/grub/grubenv :
- recordfail=1
- =================== UEFI/Legacy mode:
- This live-session is not in EFI-mode.
- SecureBoot maybe enabled.
- =================== PARTITIONS & DISKS:
- sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
- sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
- sda3 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda3.
- sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
- =================== parted -lm:
- BYT;
- /dev/sda:1000GB:scsi:512:512:msdos:ATA ST1000LM024 HN-M:;
- 1:1049kB:38.8GB:38.8GB:ntfs::;
- 3:38.8GB:986GB:947GB:ext4::;
- 2:986GB:1000GB:14.7GB:ntfs::boot;
- BYT;
- /dev/sdb:4027MB:scsi:512:512:msdos:Generic Flash Disk:;
- 1:1049kB:4027MB:4025MB:fat32::boot, lba;
- =================== lsblk:
- KNAME TYPE FSTYPE SIZE LABEL
- loop0 loop squashfs 1.8G
- sda disk 931.5G
- sda1 part ntfs 36.1G
- sda2 part ntfs 13.7G Recovery
- sda3 part ext4 881.7G
- sdb disk 3.8G
- sdb1 part vfat 3.8G LINUX MINT
- sr0 rom 1024M
- KNAME ROTA RO RM STATE MOUNTPOINT
- loop0 1 1 0 /rofs
- sda 1 0 0 running
- sda1 1 0 0 /mnt/boot-sav/sda1
- sda2 1 0 0 /mnt/boot-sav/sda2
- sda3 1 0 0 /mnt/boot-sav/sda3
- sdb 1 0 1 running
- sdb1 1 0 1 /cdrom
- sr0 1 0 1 running
- =================== mount:
- sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
- proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
- udev on /dev type devtmpfs (rw,nosuid,relatime,size=2979468k,nr_inodes=744867,mode=755)
- devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
- tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=600596k,mode=755)
- /dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
- /dev/loop0 on /rofs type squashfs (ro,noatime)
- /cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
- securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
- tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
- tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
- tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
- cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
- cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
- pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
- cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
- cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
- cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
- cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
- cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
- cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
- cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
- cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
- cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
- cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
- cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
- systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=17564)
- mqueue on /dev/mqueue type mqueue (rw,relatime)
- hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
- debugfs on /sys/kernel/debug type debugfs (rw,relatime)
- tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
- fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
- configfs on /sys/kernel/config type configfs (rw,relatime)
- tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
- tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=600592k,mode=700,uid=999,gid=999)
- gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
- /dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
- /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
- /dev/sda3 on /mnt/boot-sav/sda3 type ext4 (rw,relatime)
- =================== ls:
- /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
- /sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 size slaves stat subsystem trace uevent
- /sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
- /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdc sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout udmabuf uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
- ls /dev/mapper: control
- =================== hexdump -n512 -C /dev/sda1
- 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
- 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
- 00000020 00 00 00 00 80 00 80 00 ff 3f 84 04 00 00 00 00 |.........?......|
- 00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
- 00000040 f6 00 00 00 01 00 00 00 59 81 1e 10 86 1e 10 42 |........Y......B|
- 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
- 00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
- 00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
- 00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
- 00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
- 000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
- 000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
- 000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
- 000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
- 000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
- 000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
- 00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
- 00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
- 00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
- 00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
- 00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
- 00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
- 00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
- 00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
- 00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
- 00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
- 000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
- 000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
- 000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
- 000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
- 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
- 00000200
- =================== hexdump -n512 -C /dev/sda2
- 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
- 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 e0 ba 72 |........?......r|
- 00000020 00 00 00 00 80 00 80 00 ff 7f b5 01 00 00 00 00 |................|
- 00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
- 00000040 f6 00 00 00 01 00 00 00 52 0b d6 08 52 d6 08 7c |........R...R..||
- 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
- 00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
- 00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
- 00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
- 00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
- 000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
- 000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
- 000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
- 000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
- 000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
- 000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
- 00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
- 00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
- 00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
- 00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
- 00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
- 00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
- 00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
- 00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
- 00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
- 00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
- 000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
- 000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
- 000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
- 000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
- 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
- 00000200
- =================== df -Th:
- Filesystem Type Size Used Avail Use% Mounted on
- udev devtmpfs 2.9G 0 2.9G 0% /dev
- tmpfs tmpfs 587M 1.4M 586M 1% /run
- /dev/sdb1 vfat 3.8G 1.9G 1.9G 50% /cdrom
- /dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
- /cow overlay 2.9G 28M 2.9G 1% /
- tmpfs tmpfs 2.9G 0 2.9G 0% /dev/shm
- tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
- tmpfs tmpfs 2.9G 0 2.9G 0% /sys/fs/cgroup
- tmpfs tmpfs 2.9G 12K 2.9G 1% /tmp
- tmpfs tmpfs 587M 12K 587M 1% /run/user/999
- /dev/sda1 fuseblk 37G 36G 301M 100% /mnt/boot-sav/sda1
- /dev/sda2 fuseblk 14G 7.1G 6.7G 52% /mnt/boot-sav/sda2
- /dev/sda3 ext4 867G 153G 671G 19% /mnt/boot-sav/sda3
- =================== fdisk -l:
- Disk /dev/loop0: 1.8 GiB, 1904443392 bytes, 3719616 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0x83777da6
- Device Boot Start End Sectors Size Id Type
- /dev/sda1 2048 75778047 75776000 36.1G 7 HPFS/NTFS/exFAT
- /dev/sda2 * 1924849664 1953521663 28672000 13.7G 7 HPFS/NTFS/exFAT
- /dev/sda3 75778048 1924848360 1849070313 881.7G 83 Linux
- Partition table entries are not in disk order.
- Disk /dev/sdb: 3.8 GiB, 4026531840 bytes, 7864320 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0x0013e4a6
- Device Boot Start End Sectors Size Id Type
- /dev/sdb1 * 2048 7864319 7862272 3.8G c W95 FAT32 (LBA)
- Gtk-Message: 19:55:39.286: GtkDialog mapped without a transient parent. This is discouraged.
- Gtk-Message: 19:56:13.157: GtkDialog mapped without a transient parent. This is discouraged.
- =================== Default settings of Boot Repair
- The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
- =================== Final advice in case of suggested repair
- The boot files of [Linux Mint 19.3 Tricia] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
- =================== User settings
- The settings chosen by the user will purge (in order to download legacy) and reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair will be performed: unhide-bootmenu-9s repair-filesystems fix-windows-boot
- Gtk-Message: 19:57:39.768: GtkDialog mapped without a transient parent. This is discouraged.
- Force Unmount all blkid partitions (for fsck) except / /boot /cdrom /dev /etc /home /opt /pas /proc /rofs /sys /tmp /usr /var
- ntfsfix /dev/sda1
- Mounting volume... Windows is hibernated, refused to mount.
- FAILED
- Attempting to correct errors...
- Processing $MFT and $MFTMirr...
- Comparing $MFTMirr to $MFT... OK
- Processing of $MFT and $MFTMirr completed successfully.
- Setting required flags on partition... OK
- Going to empty the journal ($LogFile)... OK
- Windows is hibernated, refused to mount.
- Remount failed: Operation not permitted
- ntfsfix /dev/sda2
- Mounting volume... SET@_progressbar1.pulse()
- The disk contains an unclean file system (0, 0).
- Metadata kept in Windows cache, refused to mount.
- FAILED
- Attempting to correct errors...
- Processing $MFT and $MFTMirr...
- Comparing $MFTMirr to $MFT... OK
- Processing of $MFT and $MFTMirr completed successfully.
- Setting required flags on partition... OK
- Going to empty the journal ($LogFile)... SET@_progressbar1.pulse()
- OK
- Checking the alternate boot sector... OK
- NTFS volume version is 3.1.
- NTFS partition /dev/sda2 was processed successfully.
- fsck -fyM /dev/sda3
- fsck from util-linux 2.31.1
- Quantity of real Windows: 1
- WinSE in sda1
- mkdir: cannot create directory ‘/mnt/boot-sav/sda1/Boot’: Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/AUTORUN.INF': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/BCD': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/BCD.LOG': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/BCD.LOG1': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/BCD.LOG2': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/BOOT.SDI': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/BOOTSTAT.DAT': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/Desktop.ini': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/Fonts': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/Info.exe': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/Resources': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/bcd.old': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/bg-BG': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/bootuwf.dll': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/bootvhd.dll': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/cs-CZ': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/da-DK': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/de-DE': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/el-GR': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/en-GB': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/en-US': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/es-ES': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/es-MX': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/et-EE': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/fi-FI': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/fr-CA': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/fr-FR': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/hr-HR': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/hu-HU': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/it-IT': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/ja-JP': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/ko-KR': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/lt-LT': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/lv-LV': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/memtest.exe': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/nb-NO': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/nl-NL': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/pl-PL': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.arabic': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.chinese simplified': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.chinese traditional': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.croatian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.czech': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.danish': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.dutch': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.ed': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.english': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.finnish': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.french': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.german': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.greek': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.hebrew': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.hungarian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.italian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.japanese': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.korean': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.norwegian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.polish': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.portuguese': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.portuguese brazilian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.romanian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.russian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.slovak': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.slovenian': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.spanish': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.swedish': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.thai': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/protect.turkish': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/pt-BR': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/pt-PT': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/qps-ploc': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/qps-plocm': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/ro-RO': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/ru-RU': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/sk-SK': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/sl-SI': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/sr-Latn-CS': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/sr-Latn-RS': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/sv-SE': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/tr-TR': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/uk-UA': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/updaterevokesipolicy.p7b': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/zh-CN': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/zh-HK': Read-only file system
- cp: cannot create directory '/mnt/boot-sav/sda1/zh-TW': Read-only file system
- cp: cannot create regular file '/mnt/boot-sav/sda1/bootmgr': Read-only file system
- Copied Win boot files from sda2 to sda1
- /mnt/boot-sav/sda1/ may need repair.
- chroot /mnt/boot-sav/sda3 apt-get -y update
- Purge the GRUB of sda3
- grub-pc NOT available (apt-cache policy problem)
- grub2 NOT available (apt-cache policy problem)
- grub NOT available (apt-cache policy problem)
- =================== grub2 purge cancelled
- Please enable a repository containing the [grub2] packages in the software sources of Linux Mint 19.3 Tricia (sda3). Then try again.
- Gtk-Message: 20:00:08.526: GtkDialog mapped without a transient parent. This is discouraged.
- =================== No valid source for grub2 in /mnt/boot-sav/sda3/etc/apt/sources.list :
- # deb cdrom:[Linux Mint 19.2 _Tina_ - Release amd64 20190729]/ bionic contrib main non-free
- deb https://assets.checkra.in/debian /
- ** (xed:11956): WARNING **: 20:00:42.007: Set document metadata failed: Setting attribute metadata::xed-spell-language not supported
- ** (xed:11956): WARNING **: 20:00:42.007: Set document metadata failed: Setting attribute metadata::xed-encoding not supported
- ** (xed:11956): WARNING **: 20:00:44.170: Set document metadata failed: Setting attribute metadata::xed-position not supported
- =================== Default settings of Boot Repair
- The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
- =================== Final advice in case of suggested repair
- The boot files of [Linux Mint 19.3 Tricia] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
- =================== User settings
- The settings chosen by the user will purge (in order to download legacy) and reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair will be performed: unhide-bootmenu-9s repair-filesystems fix-windows-boot
- Gtk-Message: 20:00:47.147: GtkDialog mapped without a transient parent. This is discouraged.
- Force Unmount all blkid partitions (for fsck) except / /boot /cdrom /dev /etc /home /opt /pas /proc /rofs /sys /tmp /usr /var
- ntfsfix /dev/sda1
- Mounting volume... Windows is hibernated, refused to mount.
- FAILED
- Attempting to correct errors...
- Processing $MFT and $MFTMirr...
- Comparing $MFTMirr to $MFT... OK
- Processing of $MFT and $MFTMirr completed successfully.
- Setting required flags on partition... OK
- Going to empty the journal ($LogFile)... OK
- Windows is hibernated, refused to mount.
- Remount failed: Operation not permitted
- ntfsfix /dev/sda2
- Mounting volume... SET@_progressbar1.pulse()
- OK
- Processing of $MFT and $MFTMirr completed successfully.
- Checking the alternate boot sector... OK
- NTFS volume version is 3.1.
- NTFS partition /dev/sda2 was processed successfully.
- fsck -fyM /dev/sda3
- fsck from util-linux 2.31.1
- Windows is hibernated, refused to mount.
- Falling back to read-only mount because the NTFS partition is in an
- unsafe state. Please resume and shutdown Windows fully (no hibernation
- or fast restarting.)
- Quantity of real Windows: 6
- chroot /mnt/boot-sav/sda3 apt-get -y update
- Purge the GRUB of sda3
- grub-pc NOT available (apt-cache policy problem)
- grub2 NOT available (apt-cache policy problem)
- grub NOT available (apt-cache policy problem)
- =================== grub2 purge cancelled
- Please enable a repository containing the [grub2] packages in the software sources of Linux Mint 19.3 Tricia (sda3). Then try again.
- Gtk-Message: 20:02:35.006: GtkDialog mapped without a transient parent. This is discouraged.
- =================== No valid source for grub2 in /mnt/boot-sav/sda3/etc/apt/sources.list :
- # deb cdrom:[Linux Mint 19.2 _Tina_ - Release amd64 20190729]/ bionic contrib main non-free
- deb https://assets.checkra.in/debian /
- ** (xed:13466): WARNING **: 20:06:43.729: Set document metadata failed: Setting attribute metadata::xed-spell-language not supported
- ** (xed:13466): WARNING **: 20:06:43.739: Set document metadata failed: Setting attribute metadata::xed-encoding not supported
- ** (xed:13466): WARNING **: 20:06:43.924: Set document metadata failed: Setting attribute metadata::xed-spell-language not supported
- ** (xed:13466): WARNING **: 20:06:43.924: Set document metadata failed: Setting attribute metadata::xed-encoding not supported
- ** (xed:13466): WARNING **: 20:06:44.124: Set document metadata failed: Setting attribute metadata::xed-spell-language not supported
- ** (xed:13466): WARNING **: 20:06:44.124: Set document metadata failed: Setting attribute metadata::xed-encoding not supported
- =================== Default settings of Boot Repair
- The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
- =================== Final advice in case of suggested repair
- The boot files of [Linux Mint 19.3 Tricia] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
- =================== User settings
- The settings chosen by the user will purge (in order to download legacy) and reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair will be performed: unhide-bootmenu-9s repair-filesystems fix-windows-boot
- Gtk-Message: 20:06:47.400: GtkDialog mapped without a transient parent. This is discouraged.
- Force Unmount all blkid partitions (for fsck) except / /boot /cdrom /dev /etc /home /opt /pas /proc /rofs /sys /tmp /usr /var
- ntfsfix /dev/sda1
- Mounting volume... Windows is hibernated, refused to mount.
- FAILED
- Attempting to correct errors...
- Processing $MFT and $MFTMirr...
- Comparing $MFTMirr to $MFT... OK
- Processing of $MFT and $MFTMirr completed successfully.
- Setting required flags on partition... OK
- Going to empty the journal ($LogFile)... OK
- Windows is hibernated, refused to mount.
- Remount failed: Operation not permitted
- ntfsfix /dev/sda2
- Mounting volume... SET@_progressbar1.pulse()
- OK
- Processing of $MFT and $MFTMirr completed successfully.
- Checking the alternate boot sector... OK
- NTFS volume version is 3.1.
- NTFS partition /dev/sda2 was processed successfully.
- fsck -fyM /dev/sda3
- fsck from util-linux 2.31.1
- Windows is hibernated, refused to mount.
- Falling back to read-only mount because the NTFS partition is in an
- unsafe state. Please resume and shutdown Windows fully (no hibernation
- or fast restarting.)
- Quantity of real Windows: 6
- chroot /mnt/boot-sav/sda3 apt-get -y update
- Purge the GRUB of sda3
- ** (xed:13466): WARNING **: 20:07:00.430: Set document metadata failed: Setting attribute metadata::xed-spell-language not supported
- ** (xed:13466): WARNING **: 20:07:00.431: Set document metadata failed: Setting attribute metadata::xed-encoding not supported
- grub-pc NOT available (apt-cache policy problem)
- grub2 NOT available (apt-cache policy problem)
- grub NOT available (apt-cache policy problem)
- =================== grub2 purge cancelled
- Please enable a repository containing the [grub2] packages in the software sources of Linux Mint 19.3 Tricia (sda3). Then try again.
- Gtk-Message: 20:07:28.190: GtkDialog mapped without a transient parent. This is discouraged.
- =================== No valid source for grub2 in /mnt/boot-sav/sda3/etc/apt/sources.list :
- deb cdrom:[Linux Mint 19.2 _Tina_ - Release amd64 20190729]/ bionic contrib main non-free
- deb https://assets.checkra.in/debian /
- ** (xed:13466): WARNING **: 20:09:34.680: Set document metadata failed: Setting attribute metadata::xed-position not supported
- =================== Suggested repair
- The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBR of sda.
- Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
- =================== Final advice in case of suggested repair
- The boot files of [Linux Mint 19.3 Tricia] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
- =================== User settings
- The settings chosen by the user will not act on the boot.
- pastebinit packages needed
- Gtk-Message: 20:10:55.688: GtkDialog mapped without a transient parent. This is discouraged.
- E: The repository 'cdrom://Linux Mint 19.3 _Tricia_ - Release amd64 20191213 bionic Release' does not have a Release file.
- debconf: unable to initialize frontend: Dialog
- debconf: (TERM is not set, so the dialog frontend is not usable.)
- debconf: falling back to frontend: Readline
- debconf: unable to initialize frontend: Readline
- debconf: (This frontend requires a controlling tty.)
- debconf: falling back to frontend: Teletype
- dpkg-preconfigure: unable to re-open stdin:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement