Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- sudo hdparm -I /dev/sdb
- /dev/sdb:
- ATA device, with non-removable media
- Model Number: TOSHIBA HDWD130
- Serial Number: Z7444HTAS
- Firmware Revision: MX6OACF0
- Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0; Revision: ATA8-AST T13 Project D1697 Revision 0b
- Standards:
- Used: unknown (minor revision code 0x0029)
- Supported: 8 7 6 5
- Likely used: 8
- Configuration:
- Logical max current
- cylinders 16383 16383
- heads 16 16
- sectors/track 63 63
- --
- CHS current addressable sectors: 16514064
- LBA user addressable sectors: 268435455
- LBA48 user addressable sectors: 5860533168
- Logical Sector size: 512 bytes
- Physical Sector size: 4096 bytes
- Logical Sector-0 offset: 0 bytes
- device size with M = 1024*1024: 2861588 MBytes
- device size with M = 1000*1000: 3000592 MBytes (3000 GB)
- cache/buffer size = unknown
- Form Factor: 3.5 inch
- Nominal Media Rotation Rate: 7200
- Capabilities:
- LBA, IORDY(can be disabled)
- Queue depth: 32
- Standby timer values: spec'd by Standard, no device specific minimum
- R/W multiple sector transfer: Max = 16 Current = 16
- Advanced power management level: disabled
- DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
- Cycle time: min=120ns recommended=120ns
- PIO: pio0 pio1 pio2 pio3 pio4
- Cycle time: no flow control=120ns IORDY flow control=120ns
- Commands/features:
- Enabled Supported:
- * SMART feature set
- Security Mode feature set
- * Power Management feature set
- * Write cache
- * Look-ahead
- * Host Protected Area feature set
- * WRITE_BUFFER command
- * READ_BUFFER command
- * NOP cmd
- * DOWNLOAD_MICROCODE
- Advanced Power Management feature set
- Power-Up In Standby feature set
- * SET_FEATURES required to spinup after power up
- SET_MAX security extension
- * 48-bit Address feature set
- * Device Configuration Overlay feature set
- * Mandatory FLUSH_CACHE
- * FLUSH_CACHE_EXT
- * SMART error logging
- * SMART self-test
- Media Card Pass-Through
- * General Purpose Logging feature set
- * WRITE_{DMA|MULTIPLE}_FUA_EXT
- * 64-bit World wide name
- * URG for READ_STREAM[_DMA]_EXT
- * URG for WRITE_STREAM[_DMA]_EXT
- * WRITE_UNCORRECTABLE_EXT command
- * {READ,WRITE}_DMA_EXT_GPL commands
- * Segmented DOWNLOAD_MICROCODE
- unknown 119[7]
- * Gen1 signaling speed (1.5Gb/s)
- * Gen2 signaling speed (3.0Gb/s)
- * Gen3 signaling speed (6.0Gb/s)
- * Native Command Queueing (NCQ)
- * Host-initiated interface power management
- * Phy event counters
- * NCQ priority information
- Non-Zero buffer offsets in DMA Setup FIS
- DMA Setup Auto-Activate optimization
- Device-initiated interface power management
- In-order data delivery
- * Software settings preservation
- * SMART Command Transport (SCT) feature set
- * SCT Write Same (AC2)
- * SCT Error Recovery Control (AC3)
- * SCT Features Control (AC4)
- * SCT Data Tables (AC5)
- Security:
- Master password revision code = 65534
- supported
- not enabled
- not locked
- frozen
- not expired: security count
- not supported: enhanced erase
- 468min for SECURITY ERASE UNIT.
- Logical Unit WWN Device Identifier: 5000039fe6de116b
- NAA : 5
- IEEE OUI : 000039
- Unique ID : fe6de116b
- Checksum: correct
- ------------------------
- sudo hdparm -I /dev/sdc
- /dev/sdc:
- ATA device, with non-removable media
- Model Number: Hitachi HDS723030BLE640
- Serial Number: MS79215X05KANA
- Firmware Revision: MX6OAAB0
- Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0; Revision: ATA8-AST T13 Project D1697 Revision 0b
- Standards:
- Used: unknown (minor revision code 0x0029)
- Supported: 8 7 6 5
- Likely used: 8
- Configuration:
- Logical max current
- cylinders 16383 16383
- heads 16 16
- sectors/track 63 63
- --
- CHS current addressable sectors: 16514064
- LBA user addressable sectors: 268435455
- LBA48 user addressable sectors: 5860531055
- Logical Sector size: 512 bytes
- Physical Sector size: 4096 bytes
- Logical Sector-0 offset: 0 bytes
- device size with M = 1024*1024: 2861587 MBytes
- device size with M = 1000*1000: 3000591 MBytes (3000 GB)
- cache/buffer size = unknown
- Form Factor: 3.5 inch
- Nominal Media Rotation Rate: 7200
- Capabilities:
- LBA, IORDY(can be disabled)
- Queue depth: 32
- Standby timer values: spec'd by Standard, no device specific minimum
- R/W multiple sector transfer: Max = 16 Current = 16
- Advanced power management level: disabled
- DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
- Cycle time: min=120ns recommended=120ns
- PIO: pio0 pio1 pio2 pio3 pio4
- Cycle time: no flow control=120ns IORDY flow control=120ns
- Commands/features:
- Enabled Supported:
- * SMART feature set
- Security Mode feature set
- * Power Management feature set
- * Write cache
- * Look-ahead
- * Host Protected Area feature set
- * WRITE_BUFFER command
- * READ_BUFFER command
- * NOP cmd
- * DOWNLOAD_MICROCODE
- Advanced Power Management feature set
- Power-Up In Standby feature set
- * SET_FEATURES required to spinup after power up
- SET_MAX security extension
- * 48-bit Address feature set
- * Device Configuration Overlay feature set
- * Mandatory FLUSH_CACHE
- * FLUSH_CACHE_EXT
- * SMART error logging
- * SMART self-test
- Media Card Pass-Through
- * General Purpose Logging feature set
- * WRITE_{DMA|MULTIPLE}_FUA_EXT
- * 64-bit World wide name
- * URG for READ_STREAM[_DMA]_EXT
- * URG for WRITE_STREAM[_DMA]_EXT
- * WRITE_UNCORRECTABLE_EXT command
- * {READ,WRITE}_DMA_EXT_GPL commands
- * Segmented DOWNLOAD_MICROCODE
- unknown 119[7]
- * Gen1 signaling speed (1.5Gb/s)
- * Gen2 signaling speed (3.0Gb/s)
- * Gen3 signaling speed (6.0Gb/s)
- * Native Command Queueing (NCQ)
- * Host-initiated interface power management
- * Phy event counters
- * NCQ priority information
- Non-Zero buffer offsets in DMA Setup FIS
- DMA Setup Auto-Activate optimization
- Device-initiated interface power management
- In-order data delivery
- * Software settings preservation
- * SMART Command Transport (SCT) feature set
- * SCT Write Same (AC2)
- * SCT Error Recovery Control (AC3)
- * SCT Features Control (AC4)
- * SCT Data Tables (AC5)
- Security:
- Master password revision code = 65534
- supported
- not enabled
- not locked
- frozen
- not expired: security count
- not supported: enhanced erase
- 492min for SECURITY ERASE UNIT.
- Logical Unit WWN Device Identifier: 5000cca37ec286f6
- NAA : 5
- IEEE OUI : 000cca
- Unique ID : 37ec286f6
- Checksum: correct
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement