API tools faq
paste
Advertisement
jmoyerman

FPGA - Blinky No Hang

jmoyerman
Jul 5th, 2013
50
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 26.28 KB | None | 0 0
raw download clone embed print report
  1. root@bbb-one:~# dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.8.13-bone20 (root@imx6q-sabrelite-1gb) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Wed May 29 03:11:01 UTC 2013
  5. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  8. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  9. [    0.000000] On node 0 totalpages: 130816
  10. [    0.000000] free_area_init_node: node 0, pgdat c0977940, node_mem_map c09f1000
  11. [    0.000000]   Normal zone: 1024 pages used for memmap
  12. [    0.000000]   Normal zone: 0 pages reserved
  13. [    0.000000]   Normal zone: 129792 pages, LIFO batch:31
  14. [    0.000000] AM335X ES1.0 (neon )
  15. [    0.000000] PERCPU: Embedded 9 pages/cpu @c0e00000 s14080 r8192 d14592 u36864
  16. [    0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
  17. [    0.000000] pcpu-alloc: [0] 0
  18. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
  19. [    0.000000] Kernel command line: console=ttyO0,115200n8 capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G,BB-BONE-DVID-02 capemgr.enable_partno=BB-BONE-AUDI root=UUID=fce1f727-abd6-42a7-8de0-3947137aa9e2 ro rootfstype=ext4 rootwait fixrtc ip=
  20. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  21. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  23. [    0.000000] __ex_table already sorted, skipping sort
  24. [    0.000000] allocated 1048576 bytes of page_cgroup
  25. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  26. [    0.000000] Memory: 511MB = 511MB total
  27. [    0.000000] Memory: 504876k/504876k available, 19412k reserved, 0K highmem
  28. [    0.000000] Virtual kernel memory layout:
  29. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  30. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  31. [    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
  32. [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  33. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  34. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  35. [    0.000000]       .text : 0xc0008000 - 0xc08b01a8   (8865 kB)
  36. [    0.000000]       .init : 0xc08b1000 - 0xc08f9700   ( 290 kB)
  37. [    0.000000]       .data : 0xc08fa000 - 0xc097a770   ( 514 kB)
  38. [    0.000000]        .bss : 0xc097a770 - 0xc09f07fc   ( 473 kB)
  39. [    0.000000] Hierarchical RCU implementation.
  40. [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  41. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  42. [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  43. [    0.000000] Total of 128 interrupts on 1 active controller
  44. [    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
  45. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  46. [    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
  47. [    0.000000] Console: colour dummy device 80x30
  48. [    0.000391] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
  49. [    0.017388] pid_max: default: 32768 minimum: 301
  50. [    0.017639] Security Framework initialized
  51. [    0.017737] Mount-cache hash table entries: 512
  52. [    0.027189] Initializing cgroup subsys cpuacct
  53. [    0.027227] Initializing cgroup subsys memory
  54. [    0.027297] Initializing cgroup subsys blkio
  55. [    0.027446] CPU: Testing write buffer coherency: ok
  56. [    0.028029] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  57. [    0.028106] Setting up static identity map for 0x80605b00 - 0x80605b58
  58. [    0.029784] Brought up 1 CPUs
  59. [    0.029810] SMP: Total of 1 processors activated (363.67 BogoMIPS).
  60. [    0.031183] devtmpfs: initialized
  61. [    0.095394] pinctrl core: initialized pinctrl subsystem
  62. [    0.095699] rstctl core: initialized rstctl subsystem
  63. [    0.096207] regulator-dummy: no parameters
  64. [    0.096756] NET: Registered protocol family 16
  65. [    0.097809] DMA: preallocated 256 KiB pool for atomic coherent allocations
  66. [    0.107849] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  67. [    0.108610] platform 49000000.edma: alias fck already exists
  68. [    0.108641] platform 49000000.edma: alias fck already exists
  69. [    0.108665] platform 49000000.edma: alias fck already exists
  70. [    0.109875] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
  71. [    0.110050] OMAP GPIO hardware version 0.1
  72. [    0.111552] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
  73. [    0.112824] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
  74. [    0.114191] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
  75. [    0.114680] of_get_named_gpio_flags exited with status 52
  76. [    0.114709] gpio-rctrl rstctl.3: loaded OK
  77. [    0.120188] hw-breakpoint: debug architecture 0x4 unsupported.
  78. [    0.122352] cpsw.0: No hwaddr in dt. Using c8:a0:30:ab:74:0c from efuse
  79. [    0.122383] cpsw.1: No hwaddr in dt. Using c8:a0:30:ab:74:0e from efuse
  80. [    0.136157] bio: create slab <bio-0> at 0
  81. [    0.147757] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  82. [    0.147983] of_get_named_gpio_flags: can't parse gpios property
  83. [    0.148213] vmmcsd_fixed: 3300 mV
  84. [    0.151088] SCSI subsystem initialized
  85. [    0.151494] usbcore: registered new interface driver usbfs
  86. [    0.151614] usbcore: registered new interface driver hub
  87. [    0.151936] usbcore: registered new device driver usb
  88. [    0.154026] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  89. [    0.155599] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
  90. [    0.157917] DCDC1: at 1500 mV
  91. [    0.159159] vdd_mpu: 925 <--> 1325 mV at 1100 mV
  92. [    0.160353] vdd_core: 925 <--> 1150 mV at 1100 mV
  93. [    0.161476] LDO1: at 1800 mV
  94. [    0.162648] LDO2: at 3300 mV
  95. [    0.164638] LDO3: 1800 mV
  96. [    0.165764] LDO4: at 3300 mV
  97. [    0.166803] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  98. [    0.167586] omap_i2c 44e0b000.i2c: unable to select pin group
  99. [    0.168458] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  100. [    0.171025] omap_i2c 4819c000.i2c: unable to select pin group
  101. [    0.171260] media: Linux media interface: v0.10
  102. [    0.171362] Linux video capture interface: v2.00
  103. [    0.172172] Advanced Linux Sound Architecture Driver Initialized.
  104. [    0.173165] NetLabel: Initializing
  105. [    0.173184] NetLabel:  domain hash size = 128
  106. [    0.173196] NetLabel:  protocols = UNLABELED CIPSOv4
  107. [    0.173312] NetLabel:  unlabeled traffic allowed by default
  108. [    0.173808] Switching to clocksource gp_timer
  109. [    0.228174] NET: Registered protocol family 2
  110. [    0.229366] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  111. [    0.229509] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
  112. [    0.229656] TCP: Hash tables configured (established 4096 bind 4096)
  113. [    0.229758] TCP: reno registered
  114. [    0.229785] UDP hash table entries: 256 (order: 1, 12288 bytes)
  115. [    0.229827] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  116. [    0.230265] NET: Registered protocol family 1
  117. [    0.230997] RPC: Registered named UNIX socket transport module.
  118. [    0.231019] RPC: Registered udp transport module.
  119. [    0.231033] RPC: Registered tcp transport module.
  120. [    0.231045] RPC: Registered tcp NFSv4.1 backchannel transport module.
  121. [    0.231448] Trying to unpack rootfs image as initramfs...
  122. [    0.531214] Freeing initrd memory: 2552K
  123. [    0.532139] CPU PMU: probing PMU on CPU 0
  124. [    0.532173] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  125. [    0.532738] omap2_mbox_probe: platform not supported
  126. [    0.792953] VFS: Disk quotas dquot_6.5.2
  127. [    0.793333] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  128. [    0.794616] NFS: Registering the id_resolver key type
  129. [    0.794740] Key type id_resolver registered
  130. [    0.794758] Key type id_legacy registered
  131. [    0.794826] fuse init (API version 7.20)
  132. [    0.795842] Btrfs loaded
  133. [    0.796013] msgmni has been set to 991
  134. [    0.799131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  135. [    0.799159] io scheduler noop registered
  136. [    0.799173] io scheduler deadline registered
  137. [    0.799225] io scheduler cfq registered (default)
  138. [    0.800825] tps65217-bl tps65217-bl: no platform data provided
  139. [    0.801011] tps65217-bl: probe of tps65217-bl failed with error -22
  140. [    0.801859] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  141. [    0.804480] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
  142. [    0.804929] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
  143. [    1.537033] console [ttyO0] enabled
  144. [    1.541811] [drm] Initialized drm 1.1.0 20060810
  145. [    1.560256] brd: module loaded
  146. [    1.570434] loop: module loaded
  147. [    1.573868] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  148. [    1.581145] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  149. [    1.588409] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  150. [    1.595670] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  151. [    1.602926] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  152. [    1.616957] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5A,1613BBBK1776'
  153. [    1.624747] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
  154. [    1.632616] bone-capemgr bone_capemgr.9: Skipping disabled cape with part# BB-BONE-EMMC-2G
  155. [    1.641305] bone-capemgr bone_capemgr.9: Skipping disabled cape with part# BB-BONELT-HDMI
  156. [    1.674046] bone-capemgr bone_capemgr.9: slot #0: 'BCC,00A0,bcc folks,BB-SPI0_SPIDEV'
  157. [    1.712998] bone-capemgr bone_capemgr.9: slot #1: No cape found
  158. [    1.750105] bone-capemgr bone_capemgr.9: slot #2: No cape found
  159. [    1.787214] bone-capemgr bone_capemgr.9: slot #3: No cape found
  160. [    1.793464] bone-capemgr bone_capemgr.9: slot #4: specific override
  161. [    1.800059] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
  162. [    1.808092] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
  163. [    1.818216] bone-capemgr bone_capemgr.9: slot #5: specific override
  164. [    1.824806] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
  165. [    1.832833] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
  166. [    1.843029] bone-capemgr bone_capemgr.9: Skipping loading of disabled cape with part# BB-BONE-EMMC-2G
  167. [    1.852694] bone-capemgr bone_capemgr.9: Skipping loading of disabled cape with part# BB-BONELT-HDMI
  168. [    1.862456] bone-capemgr bone_capemgr.9: initialized OK.
  169. [    1.868069] bone-capemgr bone_capemgr.9: loader: before slot-0 BB-SPI0_SPIDEV:00A0 (prio 0)
  170. [    1.876821] bone-capemgr bone_capemgr.9: loader: check slot-0 BB-SPI0_SPIDEV:00A0 (prio 0)
  171. [    1.887478] OneNAND driver initializing
  172. [    1.892890] usbcore: registered new interface driver cdc_ether
  173. [    1.899118] usbcore: registered new interface driver rndis_host
  174. [    1.905425] bone-capemgr bone_capemgr.9: loader: after slot-0 BB-SPI0_SPIDEV:00A0 (prio 0)
  175. [    1.914234] usbcore: registered new interface driver cdc_ncm
  176. [    1.920200] bone-capemgr bone_capemgr.9: slot #0: Requesting part number/version based 'BB-SPI0_SPIDEV-00A0.dtbo
  177. [    1.931578] Initializing USB Mass Storage driver...
  178. [    1.936863] usbcore: registered new interface driver usb-storage
  179. [    1.943171] USB Mass Storage support registered.
  180. [    1.948060] bone-capemgr bone_capemgr.9: slot #0: Requesting firmware 'BB-SPI0_SPIDEV-00A0.dtbo' for board-name 'BCC', version '00A0'
  181. [    1.960779] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  182. [    1.967850] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
  183. [    1.973143] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  184. [    1.981962] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  185. [    1.981983] musb-hdrc: MHDRC RTL version 2.0
  186. [    1.981997] musb-hdrc: setup fifo_mode 4
  187. [    1.982023] musb-hdrc: 28/31 max ep, 16384/16384 memory
  188. [    1.982174] musb-hdrc musb-hdrc.0.auto: *** mode=3
  189. [    1.987248] musb-hdrc musb-hdrc.0.auto: *** power=250
  190. [    1.993284] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
  191. [    1.998562] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
  192. [    2.007587] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  193. [    2.007609] musb-hdrc: MHDRC RTL version 2.0
  194. [    2.007623] musb-hdrc: setup fifo_mode 4
  195. [    2.007644] musb-hdrc: 28/31 max ep, 16384/16384 memory
  196. [    2.007785] musb-hdrc musb-hdrc.1.auto: *** mode=1
  197. [    2.012857] musb-hdrc musb-hdrc.1.auto: *** power=250
  198. [    2.018169] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  199. [    2.024584] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  200. [    2.032853] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
  201. [    2.032987] usb usb1: default language 0x0409
  202. [    2.033046] usb usb1: udev 1, busnum 1, minor = 0
  203. [    2.033069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  204. [    2.040209] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  205. [    2.047783] usb usb1: Product: MUSB HDRC host driver
  206. [    2.053000] usb usb1: Manufacturer: Linux 3.8.13-bone20 musb-hcd
  207. [    2.059298] usb usb1: SerialNumber: musb-hdrc.1.auto
  208. [    2.065276] usb usb1: usb_probe_device
  209. [    2.065305] usb usb1: configuration #1 chosen from 1 choice
  210. [    2.065376] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  211. [    2.065579] hub 1-0:1.0: usb_probe_interface
  212. [    2.065600] hub 1-0:1.0: usb_probe_interface - got id
  213. [    2.065629] hub 1-0:1.0: USB hub found
  214. [    2.069688] hub 1-0:1.0: 1 port detected
  215. [    2.073858] hub 1-0:1.0: standalone hub
  216. [    2.073876] hub 1-0:1.0: individual port power switching
  217. [    2.073892] hub 1-0:1.0: no over-current protection
  218. [    2.073908] hub 1-0:1.0: Single TT
  219. [    2.073927] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
  220. [    2.073944] hub 1-0:1.0: power on to power good time: 10ms
  221. [    2.073989] hub 1-0:1.0: local power source is good
  222. [    2.074102] hub 1-0:1.0: enabling power on all ports
  223. [    2.075367] mousedev: PS/2 mouse device common for all mice
  224. [    2.083659] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  225. [    2.091461] i2c /dev entries driver
  226. [    2.096501] Driver for 1-wire Dallas network protocol.
  227. [    2.103358] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  228. [    2.110913] cpuidle: using governor ladder
  229. [    2.115247] cpuidle: using governor menu
  230. [    2.119759] of_get_named_gpio_flags: can't parse gpios property
  231. [    2.119778] of_get_named_gpio_flags: can't parse gpios property
  232. [    2.119793] of_get_named_gpio_flags: can't parse gpios property
  233. [    2.119830] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
  234. [    2.127075] omap_hsmmc mmc.4: Failed to get rstctl; not using any
  235. [    2.133505] omap_hsmmc mmc.4: unable to select pin group
  236. [    2.139357] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  237. [    2.146593] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  238. [    2.153939] mmc.4 supply vmmc_aux not found, using dummy regulator
  239. [    2.160605] omap_hsmmc mmc.4: pins are not configured from the driver
  240. [    2.174093] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  241. [    2.174178] hub 1-0:1.0: hub_suspend
  242. [    2.174220] usb usb1: bus auto-suspend, wakeup 1
  243. [    2.193630] of_get_named_gpio_flags: can't parse gpios property
  244. [    2.193652] of_get_named_gpio_flags: can't parse gpios property
  245. [    2.193666] of_get_named_gpio_flags: can't parse gpios property
  246. [    2.193716] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
  247. [    2.199928] omap_hsmmc mmc.5: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn-CONSUMER
  248. [    2.208643] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
  249. [    2.214826] omap_hsmmc mmc.5: unable to select pin group
  250. [    2.220710] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
  251. [    2.227862] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
  252. [    2.235126] mmc.5 supply vmmc_aux not found, using dummy regulator
  253. [    2.241869] omap_hsmmc mmc.5: pins are not configured from the driver
  254. [    2.276057] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
  255. [    2.287795] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
  256. [    2.295098] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  257. [    2.304082] leds-gpio gpio-leds.8: pins are not configured from the driver
  258. [    2.311327] of_get_named_gpio_flags exited with status 53
  259. [    2.311350] of_get_named_gpio_flags exited with status 54
  260. [    2.311369] of_get_named_gpio_flags exited with status 55
  261. [    2.311388] of_get_named_gpio_flags exited with status 56
  262. [    2.311411] of_get_named_gpio_flags exited with status 53
  263. [    2.311635] of_get_named_gpio_flags exited with status 54
  264. [    2.311865] of_get_named_gpio_flags exited with status 55
  265. [    2.312056] of_get_named_gpio_flags exited with status 56
  266. [    2.312419] ledtrig-cpu: registered to indicate activity on CPUs
  267. [    2.319269] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  268. [    2.326535] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  269. [    2.335261] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  270. [    2.341627] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  271. [    2.348906] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  272. [    2.357316] usbcore: registered new interface driver usbhid
  273. [    2.363256] usbhid: USB HID core driver
  274. [    2.370286] TCP: cubic registered
  275. [    2.374082] NET: Registered protocol family 10
  276. [    2.380248] NET: Registered protocol family 17
  277. [    2.385386] Key type dns_resolver registered
  278. [    2.390293] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  279. [    2.398511] ThumbEE CPU extension supported.
  280. [    2.403061] Registering SWP/SWPB emulation handler
  281. [    2.409373] registered taskstats version 1
  282. [    2.429913] mmc1: BKOPS_EN bit is not set
  283. [    2.437240] mmc1: new high speed MMC card at address 0001
  284. [    2.443808] mmcblk0: mmc1:0001 MMC02G 1.78 GiB
  285. [    2.449009] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
  286. [    2.455605] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
  287. [    2.464262]  mmcblk0: p1 p2
  288. [    2.468922] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  289. [    2.475342] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  290. [    2.483352]  mmcblk0boot1: unknown partition table
  291. [    2.494875]  mmcblk0boot0: unknown partition table
  292. [    2.506330] libphy: 4a101000.mdio: probed
  293. [    2.510615] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  294. [    2.521050] Detected MACID = c8:a0:30:ab:74:0c
  295. [    2.525780] cpsw 4a100000.ethernet: NAPI disabled
  296. [    2.532966] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  297. [    2.545296] ALSA device list:
  298. [    2.548429]   No soundcards found.
  299. [    2.552745] Freeing init memory: 288K
  300. [    2.636121] udevd[92]: starting version 175
  301. [    2.808224] bone-capemgr bone_capemgr.9: failed to load firmware 'BB-SPI0_SPIDEV-00A0.dtbo'
  302. [    2.817048] bone-capemgr bone_capemgr.9: loader: failed to load slot-0 BB-SPI0_SPIDEV:00A0 (prio 0)
  303. [    3.927971] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  304. [    3.935635] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  305. [    4.593113] EXT4-fs (mmcblk0p2): recovery complete
  306. [    4.604386] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  307. [    6.008439] udevd[319]: starting version 175
  308. [    8.396446] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  309. [    8.721574] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  310. [   14.805626] net eth0: initializing cpsw version 1.12 (0)
  311. [   14.813387] net eth0: phy found : id is : 0x7c0f1
  312. [   14.818339] libphy: PHY 4a101000.mdio:01 not found
  313. [   14.823349] net eth0: phy 4a101000.mdio:01 not found on slave 1
  314. [   14.837303] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  315. [   17.891219] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
  316. [   17.897217] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  317. [   25.090082] udc musb-hdrc.0.auto: registering UDC driver [g_multi]
  318. [   25.090216]  gadget: using random self ethernet address
  319. [   25.120335] usb0: MAC 42:bc:d4:cb:49:9b
  320. [   25.124530] usb0: HOST MAC c8:a0:30:ab:74:0e
  321. [   25.146881] gserial_setup: registered 1 ttyGS* device
  322. [   25.147044]  lun0: open backing file: /dev/mmcblk0p1
  323. [   25.152580]  gadget: Mass Storage Function, version: 2009/09/11
  324. [   25.158841]  gadget: Number of LUNs=1
  325. [   25.178690]  lun0: LUN: removable file: /dev/mmcblk0p1
  326. [   25.184178]  gadget: I/O thread pid: 1809
  327. [   25.184203]  gadget: adding config #1 'Multifunction with RNDIS'/bf0168fc
  328. [   25.207264]  gadget: adding 'rndis'/de28a140 to config 'Multifunction with RNDIS'/bf0168fc
  329. [   25.207305] rndis_register: configNr = 0
  330. [   25.207315] rndis_set_param_medium: 0 0
  331. [   25.207325]  gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
  332. [   25.207340]  gadget: adding 'acm'/de28a200 to config 'Multifunction with RNDIS'/bf0168fc
  333. [   25.207360]  gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in
  334. [   25.207372]  gadget: adding 'Mass Storage Function'/df2986c0 to config 'Multifunction with RNDIS'/bf0168fc
  335. [   25.207391]  gadget: cfg 1/bf0168fc speeds: high full
  336. [   25.207401]  gadget:   interface 0 = rndis/de28a140
  337. [   25.207409]  gadget:   interface 1 = rndis/de28a140
  338. [   25.207418]  gadget:   interface 2 = acm/de28a200
  339. [   25.207426]  gadget:   interface 3 = acm/de28a200
  340. [   25.207434]  gadget:   interface 4 = Mass Storage Function/df2986c0
  341. [   25.207450]  gadget: Multifunction Composite Gadget
  342. [   25.228738]  gadget: g_multi ready
  343. [   25.247936] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  344. [   25.270771] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
  345. [   25.289359] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
  346. [   25.289463] usb usb2: default language 0x0409
  347. [   25.289500] usb usb2: udev 1, busnum 2, minor = 128
  348. [   25.289513] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  349. [   25.296676] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  350. [   25.304219] usb usb2: Product: MUSB HDRC host driver
  351. [   25.309405] usb usb2: Manufacturer: Linux 3.8.13-bone20 musb-hcd
  352. [   25.315674] usb usb2: SerialNumber: musb-hdrc.0.auto
  353. [   25.335827] usb usb2: usb_probe_device
  354. [   25.335855] usb usb2: configuration #1 chosen from 1 choice
  355. [   25.335926] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  356. [   25.336882] hub 2-0:1.0: usb_probe_interface
  357. [   25.336899] hub 2-0:1.0: usb_probe_interface - got id
  358. [   25.336924] hub 2-0:1.0: USB hub found
  359. [   25.357917] hub 2-0:1.0: 1 port detected
  360. [   25.369384] hub 2-0:1.0: standalone hub
  361. [   25.369410] hub 2-0:1.0: individual port power switching
  362. [   25.369420] hub 2-0:1.0: no over-current protection
  363. [   25.369430] hub 2-0:1.0: Single TT
  364. [   25.369442] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
  365. [   25.369452] hub 2-0:1.0: power on to power good time: 10ms
  366. [   25.369503] hub 2-0:1.0: local power source is good
  367. [   25.369608] hub 2-0:1.0: enabling power on all ports
  368. [   25.470915] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
  369. [   25.470984] hub 2-0:1.0: hub_suspend
  370. [   25.471013] usb usb2: bus auto-suspend, wakeup 1
  371. [   27.611039] usb0: eth_open
  372. [   27.611265] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  373. [   57.546719] bone-capemgr bone_capemgr.9: part_number 'BB-BCC', version 'N/A'
  374. [   57.556883] bone-capemgr bone_capemgr.9: slot #6: generic override
  375. [   57.563776] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
  376. [   57.571968] bone-capemgr bone_capemgr.9: slot #6: 'Override Board Name,00A0,Override Manuf,BB-BCC'
  377. [   57.582117] bone-capemgr bone_capemgr.9: slot #6: Requesting part number/version based 'BB-BCC-00A0.dtbo
  378. [   57.592247] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'BB-BCC-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
  379. [   57.616228] bone-capemgr bone_capemgr.9: slot #6: dtbo 'BB-BCC-00A0.dtbo' loaded; converting to live tree
  380. [   57.628163] bone-capemgr bone_capemgr.9: slot #6: #2 overlays
  381. [   57.681497] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
  382. [   57.695679] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
  383. [   57.714940] bone-capemgr bone_capemgr.9: slot #6: Applied #2 overlays.
  384. [  196.166792] mmcblk0: error -110 sending status command, retrying
  385. [  196.174817] mmcblk0: error -110 sending status command, retrying
  386. [  198.095657] [sched_delayed] sched: RT throttling activated
  387. [  198.102072] mmcblk0: error -110 sending status command, aborting
  388. [  198.108806] end_request: I/O error, dev mmcblk0, sector 1718145
  389. [  198.115396] end_request: I/O error, dev mmcblk0, sector 1718153
  390. [  198.121963] end_request: I/O error, dev mmcblk0, sector 1718161
  391. [  198.128526] end_request: I/O error, dev mmcblk0, sector 1718169
  392. [  198.135664] Aborting journal on device mmcblk0p2-8.
  393. [  198.142480] mmcblk0: error -110 sending status command, retrying
  394. [  198.149229] mmcblk0: error -110 sending status command, retrying
  395. [  198.155929] mmcblk0: error -110 sending status command, aborting
  396. [  198.162596] end_request: I/O error, dev mmcblk0, sector 1717449
  397. [  198.169165] Buffer I/O error on device mmcblk0p2, logical block 196608
  398. [  198.176429] lost page write due to I/O error on mmcblk0p2
  399. [  198.182823] JBD2: Error -5 detected when updating journal superblock for mmcblk0p2-8.
  400. [  198.191670] EXT4-fs error (device mmcblk0p2) in ext4_reserve_inode_write:4688: Journal has aborted
  401. [  200.118178] mmcblk0: error -110 sending status command, retrying
  402. [  202.040102] mmcblk0: error -110 sending status command, retrying
  403. [  202.047092] mmcblk0: error -110 sending status command, aborting
  404. [  202.053815] end_request: I/O error, dev mmcblk0, sector 144585
  405. [  202.060294] Buffer I/O error on device mmcblk0p2, logical block 0
  406. [  202.067039] lost page write due to I/O error on mmcblk0p2
  407. [  202.073565] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
  408. [  203.039252] omap_i2c 44e0b000.i2c: controller timed out
  409. [  203.045187] tps65217 0-0024: Write for reg 0x11 failed
  410. [  203.050901] cpufreq_cpu0: failed to scale voltage up: -110
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!