fastledissue

/*******************************************************************

* Use the getPrintJob() function to get the current print job on

* your 3D printer being managed by OctoPrint. Output the current

* progress of the job on a strip (or circle!) of 'Neopixel' LEDs

* such as WS2812B. Uses the FastLED library to drive pixels.

*

* You will need the IP or hostname of your OctoPrint server, a

* port number (will be 80 unless you are reaching it from an

* external source) and an API key from the OctoPrint

* installation - http://docs.octoprint.org/en/master/api/general.html#authorization

* You will also need to enable CORS - http://docs.octoprint.org/en/master/api/general.html#cross-origin-requests

*

* OctoprintApi by Stephen Ludgate https://www.youtube.com/channel/UCVEEuAouZ6ua4oetLjjHAuw

*

* Example based on original work written by A. Fichtner - https://github.com/anfichtn

*******************************************************************/

#include <OctoPrintAPI.h> //This is where the magic happens... shazam!

#include <ESP8266WiFi.h>

#include <WiFiClient.h>



#define FASTLED_ESP8266_RAW_PIN_ORDER

#define FASTLED_INTERRUPT_RETRY_COUNT 0

#include <FastLED.h> // Uses FastLED Library to drive WS2812B 'Neopixel' LEDs



#define LED_PIN D4 // The pin connected to Data In on the strip

#define NUM_LEDS 5 // Number of LED's on your strip

#define LED_BRIGHTNESS 80 // set Brightness value

#define MILLI_AMPS 4000 // Maximum current your power source can deliver in mA

#define CONNECTION_COLOR 0xFF4500 // Purple WiFi connection status color

CRGB leds[NUM_LEDS];



const char* ssid = ""; // your network SSID (name)

const char* password = ""; // your network password

WiFiClient client;



// You only need to set one of the of follwowing:

// IPAddress ip(192, 168, 1, 174); // Your IP address of your OctoPrint server (inernal or external)

char* octoprint_host = "octopi.local"; // Or your hostname. Comment out one or the other.

const int octoprint_httpPort = 80; //If you are connecting through a router this will work, but you need a random port forwarded to the OctoPrint server from your router. Enter that port here if you are external

String octoprint_apikey = ""; //See top of file or GIT Readme about getting API key



unsigned long api_mtbs = 10000; //mean time between api requests (10 seconds)

unsigned long api_lasttime = 0; //last time api request has been done

byte connection_retry = 0;

byte point = 0;



long printed_timeout = 3600000; //60 mins in milliseconds - timeout after printing completed, to clear strip

long printed_timeout_timer = printed_timeout;



// Use one of the following:

//OctoprintApi api; //Be sure to call init in setup.

//OctoprintApi api(client, ip, octoprint_httpPort, octoprint_apikey); //If using IP address

OctoprintApi api(client, octoprint_host, octoprint_httpPort, octoprint_apikey); //If using hostname. Comment out one or the other.



void setup() {

Serial.begin(115200);

FastLED.addLeds<WS2811, LED_PIN, GRB>(leds, NUM_LEDS);

FastLED.setDither(false);

FastLED.setCorrection(TypicalLEDStrip);

FastLED.setBrightness(LED_BRIGHTNESS);

FastLED.setMaxPowerInVoltsAndMilliamps(5, MILLI_AMPS);

fill_solid(leds, NUM_LEDS, CRGB::Black);

delay(100);

FastLED.show();

fill_solid(leds, NUM_LEDS, CRGB::Red);

delay(1000);

FastLED.show();

fill_solid(leds, NUM_LEDS, CRGB::Yellow);

delay(1000);

FastLED.show();

fill_solid(leds, NUM_LEDS, CRGB::Green);

delay(1000);

FastLED.show();



/* Explicitly set the ESP8266 to be a WiFi-client, otherwise, it by default,

would try to act as both a client and an access-point and could cause

network-issues with your other WiFi-devices on your WiFi-network. */

WiFi.mode(WIFI_STA);

// disconnect if previously connected

WiFi.disconnect();

delay(100);



// We start by connecting to a WiFi network

Serial.println();

Serial.println();

Serial.print("Connecting to ");

Serial.println(ssid);

WiFi.begin(ssid, password);



while (WiFi.status() != WL_CONNECTED) {

delay(400);

Serial.print(".");

fill_solid(leds, NUM_LEDS, CRGB::Black);

leds[connection_retry] = CONNECTION_COLOR;

delay(100);

FastLED.show();

if (connection_retry == NUM_LEDS) {

connection_retry = 0;

} else {

connection_retry++;

}

}

//Use one of these Only if you have not initialized the api object above with parameters"

//api.init(client, ip, octoprint_httpPort, octoprint_apikey); //If using IP address

//api.init(client, octoprint_host, octoprint_httpPort, octoprint_apikey);//If using hostname. Comment out one or the other.

//if you get here you have connected to the WiFi

fill_solid(leds, NUM_LEDS, CRGB::Black);

FastLED.show();

Serial.println("");

Serial.println("WiFi connected");

Serial.println("IP address: ");

Serial.println(WiFi.localIP());

}



void loop() {

Serial.println("black");

fill_solid(leds, NUM_LEDS, CRGB::Black);

FastLED.show();

delay(2000);

Serial.println("Red");

fill_solid(leds, NUM_LEDS, CRGB::Red);

FastLED.show();

delay(2000);

Serial.println("Yellow");

fill_solid(leds, NUM_LEDS, CRGB::Yellow);

FastLED.show();

delay(2000);

Serial.println("Greenck");

fill_solid(leds, NUM_LEDS, CRGB::Green);

FastLED.show();

delay(2000);

}