Bullet64

debian_mr_fixit

Jan 15th, 2019
207
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.4.169 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #3 SMP Thu Jan 10 20:05:09 EST 2019
  6. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  7. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  8. [ 0.000000] bootconsole [uart0] enabled
  9. [ 0.000000] On node 0 totalpages: 523776
  10. [ 0.000000] DMA zone: 8184 pages used for memmap
  11. [ 0.000000] DMA zone: 0 pages reserved
  12. [ 0.000000] DMA zone: 523776 pages, LIFO batch:31
  13. [ 0.000000] psci: probing for conduit method from DT.
  14. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  15. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  16. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  17. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feee000 s45800 r8192 d32024 u86016
  18. [ 0.000000] pcpu-alloc: s45800 r8192 d32024 u86016 alloc=21*4096
  19. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  20. [ 0.000000] Detected VIPT I-cache on CPU0
  21. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592
  23. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=tty3 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 eth1addr= serial=8a0653d7f0214bc cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 video=HDMI-A-1:1920x1080@60 quiet loglevel=3 vga=current
  24. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  27. [ 0.000000] software IO TLB: mapped [mem 0x7fea6000-0x7fee6000] (0MB)
  28. [ 0.000000] Memory: 2035704K/2095104K available (13118K kernel code, 1838K rwdata, 5144K rodata, 1088K init, 787K bss, 59400K reserved, 0K cma-reserved)
  29. [ 0.000000] Virtual kernel memory layout:
  30. modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  31. vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  32. .init : 0xffffff8009260000 - 0xffffff8009370000 ( 1088 KB)
  33. .text : 0xffffff8008080000 - 0xffffff8008d50000 ( 13120 KB)
  34. .rodata : 0xffffff8008d50000 - 0xffffff8009260000 ( 5184 KB)
  35. .data : 0xffffff8009370000 - 0xffffff800953b808 ( 1839 KB)
  36. vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  37. 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
  38. fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
  39. PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  40. memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
  41. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  42. [ 0.000000] Hierarchical RCU implementation.
  43. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  44. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  45. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  46. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  47. [ 0.000000] GIC: Using split EOI/Deactivate mode
  48. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  49. [ 0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0)
  50. [ 0.000000] ITS: using cache flushing for cmd queue
  51. [ 0.000000] GIC: using LPI property table @0x0000000000290000
  52. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  53. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  54. [ 0.000000] CPU0: using LPI pending table @0x00000000002a0000
  55. [ 0.000000] GIC: using cache flushing for LPI property table
  56. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  57. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  58. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  63. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  64. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  65. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  66. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  67. [ 0.001402] Console: colour dummy device 80x25
  68. [ 0.001414] console [tty3] enabled
  69. [ 0.001422] bootconsole [uart0] disabled
  70. [ 0.001445] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  71. [ 0.001457] pid_max: default: 32768 minimum: 301
  72. [ 0.001611] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  73. [ 0.001622] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  74. [ 0.002353] Initializing cgroup subsys devices
  75. [ 0.002371] Initializing cgroup subsys freezer
  76. [ 0.002400] ftrace: allocating 47085 entries in 184 pages
  77. [ 0.124898] sched-energy: Sched-energy-costs installed from DT
  78. [ 0.124916] CPU0: update cpu_capacity 401
  79. [ 0.124979] ASID allocator initialised with 32768 entries
  80. [ 0.128166] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  81. [ 0.128659] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  82. [ 0.130020] Detected VIPT I-cache on CPU1
  83. [ 0.130053] CPU1: found redistributor 1 region 0:0x00000000fef20000
  84. [ 0.130083] CPU1: using LPI pending table @0x000000007d130000
  85. [ 0.130126] CPU1: update cpu_capacity 401
  86. [ 0.130130] CPU1: Booted secondary processor [410fd034]
  87. [ 0.130679] Detected VIPT I-cache on CPU2
  88. [ 0.130700] CPU2: found redistributor 2 region 0:0x00000000fef40000
  89. [ 0.130727] CPU2: using LPI pending table @0x000000007d160000
  90. [ 0.130755] CPU2: update cpu_capacity 401
  91. [ 0.130758] CPU2: Booted secondary processor [410fd034]
  92. [ 0.131290] Detected VIPT I-cache on CPU3
  93. [ 0.131310] CPU3: found redistributor 3 region 0:0x00000000fef60000
  94. [ 0.131337] CPU3: using LPI pending table @0x000000007d1b0000
  95. [ 0.131363] CPU3: update cpu_capacity 401
  96. [ 0.131366] CPU3: Booted secondary processor [410fd034]
  97. [ 0.131893] Detected PIPT I-cache on CPU4
  98. [ 0.131920] CPU4: found redistributor 100 region 0:0x00000000fef80000
  99. [ 0.131960] CPU4: using LPI pending table @0x000000007d1e0000
  100. [ 0.131997] CPU4: update cpu_capacity 1024
  101. [ 0.132000] CPU4: Booted secondary processor [410fd082]
  102. [ 0.132544] Detected PIPT I-cache on CPU5
  103. [ 0.132562] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  104. [ 0.132598] CPU5: using LPI pending table @0x000000007d210000
  105. [ 0.132624] CPU5: update cpu_capacity 1024
  106. [ 0.132627] CPU5: Booted secondary processor [410fd082]
  107. [ 0.132713] Brought up 6 CPUs
  108. [ 0.132797] SMP: Total of 6 processors activated.
  109. [ 0.132806] CPU features: detected feature: GIC system register CPU interface
  110. [ 0.132814] CPU features: detected feature: 32-bit EL0 Support
  111. [ 0.132826] CPU: All CPU(s) started at EL2
  112. [ 0.132872] alternatives: patching kernel code
  113. [ 0.134287] devtmpfs: initialized
  114. [ 0.150693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  115. [ 0.150717] futex hash table entries: 2048 (order: 5, 131072 bytes)
  116. [ 0.151223] pinctrl core: initialized pinctrl subsystem
  117. [ 0.151454] regulator-dummy: no parameters
  118. [ 0.153228] NET: Registered protocol family 16
  119. [ 0.158901] cpuidle: using governor ladder
  120. [ 0.162909] cpuidle: using governor menu
  121. [ 0.163517] vdso: 2 pages (1 code @ ffffff8008d56000, 1 data @ ffffff8009374000)
  122. [ 0.163548] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  123. [ 0.164085] DMA: preallocated 1024 KiB pool for atomic allocations
  124. [ 0.179219] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  125. [ 0.179308] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  126. [ 0.179377] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  127. [ 0.179449] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  128. [ 0.179516] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  129. [ 0.220504] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
  130. [ 0.220534] dc_12v: 12000 mV
  131. [ 0.220703] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  132. [ 0.220933] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
  133. [ 0.220977] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
  134. [ 0.221023] vcc3v3_pcie: supplied by dc_12v
  135. [ 0.221032] dc_12v: could not add device link regulator.2 err -2
  136. [ 0.221074] vcc3v3_pcie: 3300 mV
  137. [ 0.221225] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
  138. [ 0.221276] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]'
  139. [ 0.221292] vcc1v8_s0: 1800 mV
  140. [ 0.221441] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV
  141. [ 0.221505] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-sdio[0]'
  142. [ 0.221522] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  143. [ 0.221536] vcc1v8_sdio: unable to resolve supply
  144. [ 0.221544] vcc1v8_sdio: 1800 mV
  145. [ 0.221662] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  146. [ 0.221676] vcc1v8_sdio: regulator get failed, ret=-517
  147. [ 0.221686] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  148. [ 0.221698] vcc1v8_sdio: unable to resolve supply
  149. [ 0.221706] reg-fixed-voltage vcc1v8-sdio: vcc1v8_sdio supplying 1800000uV
  150. [ 0.221808] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-wifi[0]'
  151. [ 0.221825] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  152. [ 0.221838] vcc1v8_wifi: unable to resolve supply
  153. [ 0.221846] vcc1v8_wifi: no parameters
  154. [ 0.221963] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  155. [ 0.221977] vcc1v8_wifi: regulator get failed, ret=-517
  156. [ 0.221987] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  157. [ 0.221999] vcc1v8_sdio: unable to resolve supply
  158. [ 0.222006] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  159. [ 0.222018] vcc1v8_wifi: unable to resolve supply
  160. [ 0.222026] reg-fixed-voltage vcc1v8-wifi: vcc1v8_wifi supplying 0uV
  161. [ 0.222078] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  162. [ 0.222094] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
  163. [ 0.222127] vcc_sys: supplied by dc_12v
  164. [ 0.222135] dc_12v: could not add device link regulator.6 err -2
  165. [ 0.222162] vcc_sys: 5000 mV
  166. [ 0.222316] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  167. [ 0.222330] vcc1v8_sdio: unable to resolve supply
  168. [ 0.222338] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  169. [ 0.222350] vcc1v8_wifi: unable to resolve supply
  170. [ 0.222359] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  171. [ 0.222411] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  172. [ 0.222425] vcc_phy: no parameters
  173. [ 0.222576] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  174. [ 0.222591] vcc1v8_sdio: unable to resolve supply
  175. [ 0.222599] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  176. [ 0.222612] vcc1v8_wifi: unable to resolve supply
  177. [ 0.222622] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  178. [ 0.222672] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  179. [ 0.222688] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  180. [ 0.222723] vcc3v3_sys: supplied by vcc_sys
  181. [ 0.222731] vcc_sys: could not add device link regulator.8 err -2
  182. [ 0.222761] vcc3v3_sys: 3300 mV
  183. [ 0.222912] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  184. [ 0.222928] vcc1v8_sdio: unable to resolve supply
  185. [ 0.222935] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  186. [ 0.222948] vcc1v8_wifi: unable to resolve supply
  187. [ 0.222958] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  188. [ 0.223088] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  189. [ 0.223129] vcc5v0_host: no parameters
  190. [ 0.223277] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  191. [ 0.223293] vcc1v8_sdio: unable to resolve supply
  192. [ 0.223300] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  193. [ 0.223314] vcc1v8_wifi: unable to resolve supply
  194. [ 0.223324] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  195. [ 0.223965] iommu: Adding device ff650000.vpu_service to group 0
  196. [ 0.224044] iommu: Adding device ff660000.rkvdec to group 1
  197. [ 0.224121] iommu: Adding device ff670000.iep to group 2
  198. [ 0.224236] iommu: Adding device ff8f0000.vop to group 3
  199. [ 0.224325] iommu: Adding device ff900000.vop to group 4
  200. [ 0.225141] rk_iommu ff670800.iommu: can't get aclk
  201. [ 0.225151] rk_iommu ff670800.iommu: can't get hclk
  202. [ 0.225867] SCSI subsystem initialized
  203. [ 0.226040] libata version 3.00 loaded.
  204. [ 0.226245] usbcore: registered new interface driver usbfs
  205. [ 0.226287] usbcore: registered new interface driver hub
  206. [ 0.226378] usbcore: registered new device driver usb
  207. [ 0.226454] media: Linux media interface: v0.10
  208. [ 0.226487] Linux video capture interface: v2.00
  209. [ 0.226574] pps_core: LinuxPPS API ver. 1 registered
  210. [ 0.226581] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  211. [ 0.226599] PTP clock support registered
  212. [ 0.227741] Advanced Linux Sound Architecture Driver Initialized.
  213. [ 0.228249] Bluetooth: Core ver 2.21
  214. [ 0.228274] NET: Registered protocol family 31
  215. [ 0.228280] Bluetooth: HCI device and connection manager initialized
  216. [ 0.228292] Bluetooth: HCI socket layer initialized
  217. [ 0.228302] Bluetooth: L2CAP socket layer initialized
  218. [ 0.228324] Bluetooth: SCO socket layer initialized
  219. [ 0.229715] clocksource: Switched to clocksource arch_sys_counter
  220. [ 0.279192] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  221. [ 0.279452] NET: Registered protocol family 2
  222. [ 0.279894] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  223. [ 0.280012] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  224. [ 0.280342] TCP: Hash tables configured (established 16384 bind 16384)
  225. [ 0.280423] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  226. [ 0.280482] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  227. [ 0.280778] NET: Registered protocol family 1
  228. [ 0.281095] RPC: Registered named UNIX socket transport module.
  229. [ 0.281109] RPC: Registered udp transport module.
  230. [ 0.281115] RPC: Registered tcp transport module.
  231. [ 0.281120] RPC: Registered tcp NFSv4.1 backchannel transport module.
  232. [ 0.281347] PCI: CLS 0 bytes, default 64
  233. [ 0.282695] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  234. [ 0.282815] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  235. [ 0.285939] Initialise system trusted keyring
  236. [ 0.293831] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  237. [ 0.294579] NFS: Registering the id_resolver key type
  238. [ 0.294602] Key type id_resolver registered
  239. [ 0.294608] Key type id_legacy registered
  240. [ 0.294680] fuse init (API version 7.23)
  241. [ 0.295072] SGI XFS with security attributes, no debug enabled
  242. [ 0.299876] NET: Registered protocol family 38
  243. [ 0.299896] Key type asymmetric registered
  244. [ 0.299906] Asymmetric key parser 'x509' registered
  245. [ 0.300065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  246. [ 0.300077] io scheduler noop registered
  247. [ 0.300087] io scheduler deadline registered
  248. [ 0.300207] io scheduler cfq registered (default)
  249. [ 0.301208] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
  250. [ 0.301220] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  251. [ 0.301492] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply from device tree
  252. [ 0.301503] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  253. [ 0.301518] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
  254. [ 0.301651] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  255. [ 0.301771] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2
  256. [ 0.303232] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
  257. [ 0.303243] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  258. [ 0.304312] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  259. [ 0.304322] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  260. [ 0.304424] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  261. [ 0.304433] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  262. [ 0.306674] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
  263. [ 0.306686] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
  264. [ 0.306719] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  265. [ 0.306948] rk-vcodec ff650000.vpu_service: probe device
  266. [ 0.307162] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  267. [ 0.307700] rk-vcodec ff650000.vpu_service: init success
  268. [ 0.307932] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
  269. [ 0.307943] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
  270. [ 0.307959] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  271. [ 0.308355] rk-vcodec ff660000.rkvdec: probe device
  272. [ 0.308540] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  273. [ 0.308924] rk-vcodec ff660000.rkvdec: could not find power_model node
  274. [ 0.308932] rk-vcodec ff660000.rkvdec: init success
  275. [ 0.310395] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  276. [ 0.310406] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  277. [ 0.311861] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  278. [ 0.311871] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  279. [ 0.312281] pwm-regulator vdd-log: GPIO lookup for consumer enable
  280. [ 0.312289] pwm-regulator vdd-log: using device tree for GPIO lookup
  281. [ 0.312300] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  282. [ 0.312308] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  283. [ 0.312316] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  284. [ 0.312324] pwm-regulator vdd-log: lookup for GPIO enable failed
  285. [ 0.312347] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  286. [ 0.312427] pwm-regulator: supplied by vcc_sys
  287. [ 0.312436] vcc_sys: could not add device link regulator.10 err -2
  288. [ 0.312510] vdd_log: 800 <--> 1400 mV at 896 mV
  289. [ 0.312725] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  290. [ 0.312743] vcc1v8_sdio: unable to resolve supply
  291. [ 0.312752] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  292. [ 0.312768] vcc1v8_wifi: unable to resolve supply
  293. [ 0.313209] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  294. [ 0.314873] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
  295. [ 0.315498] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
  296. [ 0.316607] [drm] Initialized drm 1.1.0 20060810
  297. [ 0.320579] [drm] Rockchip DRM driver version: v1.0.1
  298. [ 0.321119] usbcore: registered new interface driver udl
  299. [ 0.322647] Unable to detect cache hierarchy for CPU 0
  300. [ 0.323423] brd: module loaded
  301. [ 0.328520] loop: module loaded
  302. [ 0.329107] zram: Added device: zram0
  303. [ 0.329428] lkdtm: No crash points registered, enable through debugfs
  304. [ 0.330748] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  305. [ 0.332400] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  306. [ 0.332486] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  307. [ 0.332496] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  308. [ 0.332505] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  309. [ 0.332526] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  310. [ 0.332701] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  311. [ 0.337729] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  312. [ 0.337850] stmmac - user ID: 0x10, Synopsys ID: 0x35
  313. [ 0.337855] Ring mode enabled
  314. [ 0.337861] DMA HW capability register supported
  315. [ 0.337865] Normal descriptors
  316. [ 0.337871] RX Checksum Offload Engine supported (type 2)
  317. [ 0.337876] TX Checksum insertion supported
  318. [ 0.337880] Wake-Up On Lan supported
  319. [ 0.337917] Enable RX Mitigation via HW Watchdog Timer
  320. [ 0.338022] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  321. [ 0.402979] libphy: stmmac: probed
  322. [ 0.402989] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  323. [ 0.402997] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  324. [ 0.404196] Atmel at76x USB Wireless LAN Driver 0.17 loading
  325. [ 0.404253] usbcore: registered new interface driver at76c50x-usb
  326. [ 0.404309] Broadcom 43xx driver loaded [ Features: PNL ]
  327. [ 0.404582] usbcore: registered new interface driver zd1211rw
  328. [ 0.404674] usbcore: registered new interface driver rtl8187
  329. [ 0.404782] usbcore: registered new interface driver rtl8192cu
  330. [ 0.404851] usbcore: registered new interface driver rtl8xxxu
  331. [ 0.404923] usbcore: registered new interface driver rndis_wlan
  332. [ 0.405043] usbcore: registered new interface driver usb8xxx
  333. [ 0.405277] usbcore: registered new interface driver rt2500usb
  334. [ 0.405342] usbcore: registered new interface driver rt73usb
  335. [ 0.405411] usbcore: registered new interface driver rt2800usb
  336. [ 0.405465] usbcore: registered new interface driver mt7601u
  337. [ 0.405655] usbcore: registered new interface driver ath6kl_usb
  338. [ 0.405755] usbcore: registered new interface driver ar5523
  339. [ 0.406126] usbcore: registered new interface driver mwifiex_usb
  340. [ 0.406195] Rockchip WiFi SYS interface (V1.00) ...
  341. [ 0.406330] usbcore: registered new interface driver brcmfmac
  342. [ 0.406401] usbcore: registered new interface driver rtl8150
  343. [ 0.406455] usbcore: registered new interface driver r8152
  344. [ 0.406520] usbcore: registered new interface driver asix
  345. [ 0.406574] usbcore: registered new interface driver ax88179_178a
  346. [ 0.406632] usbcore: registered new interface driver cdc_ether
  347. [ 0.406687] usbcore: registered new interface driver rndis_host
  348. [ 0.406832] usbcore: registered new interface driver cdc_ncm
  349. [ 0.406881] usbcore: registered new interface driver cdc_mbim
  350. [ 0.408239] rockchip-dwc3 usb0: failed to get drvdata dwc3
  351. [ 0.412482] rockchip-dwc3 usb1: fail to get drvdata hcd
  352. [ 0.413700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  353. [ 0.413737] ehci-pci: EHCI PCI platform driver
  354. [ 0.413794] ehci-platform: EHCI generic platform driver
  355. [ 0.417638] ehci-platform fe3c0000.usb: EHCI Host Controller
  356. [ 0.417834] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  357. [ 0.417941] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  358. [ 0.423738] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  359. [ 0.423899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  360. [ 0.423909] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  361. [ 0.423917] usb usb1: Product: EHCI Host Controller
  362. [ 0.423924] usb usb1: Manufacturer: Linux 4.4.169 ehci_hcd
  363. [ 0.423931] usb usb1: SerialNumber: fe3c0000.usb
  364. [ 0.424566] hub 1-0:1.0: USB hub found
  365. [ 0.424608] hub 1-0:1.0: 1 port detected
  366. [ 0.425620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  367. [ 0.425688] ohci-platform: OHCI generic platform driver
  368. [ 0.426459] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  369. [ 0.426681] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  370. [ 0.426834] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  371. [ 0.481935] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  372. [ 0.481948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  373. [ 0.481959] usb usb2: Product: Generic Platform OHCI controller
  374. [ 0.481968] usb usb2: Manufacturer: Linux 4.4.169 ohci_hcd
  375. [ 0.481978] usb usb2: SerialNumber: fe3e0000.usb
  376. [ 0.482548] hub 2-0:1.0: USB hub found
  377. [ 0.482587] hub 2-0:1.0: 1 port detected
  378. [ 0.484112] usbcore: registered new interface driver cdc_wdm
  379. [ 0.484178] usbcore: registered new interface driver uas
  380. [ 0.484308] usbcore: registered new interface driver usb-storage
  381. [ 0.484362] usbcore: registered new interface driver ums-alauda
  382. [ 0.484415] usbcore: registered new interface driver ums-cypress
  383. [ 0.484468] usbcore: registered new interface driver ums-datafab
  384. [ 0.484520] usbcore: registered new interface driver ums_eneub6250
  385. [ 0.484573] usbcore: registered new interface driver ums-freecom
  386. [ 0.484630] usbcore: registered new interface driver ums-isd200
  387. [ 0.484686] usbcore: registered new interface driver ums-jumpshot
  388. [ 0.484756] usbcore: registered new interface driver ums-karma
  389. [ 0.484810] usbcore: registered new interface driver ums-onetouch
  390. [ 0.484875] usbcore: registered new interface driver ums-realtek
  391. [ 0.484929] usbcore: registered new interface driver ums-sddr09
  392. [ 0.484982] usbcore: registered new interface driver ums-sddr55
  393. [ 0.485035] usbcore: registered new interface driver ums-usbat
  394. [ 0.485148] usbcore: registered new interface driver usbserial
  395. [ 0.485194] usbcore: registered new interface driver usbserial_generic
  396. [ 0.485232] usbserial: USB Serial support registered for generic
  397. [ 0.485288] usbcore: registered new interface driver cp210x
  398. [ 0.485322] usbserial: USB Serial support registered for cp210x
  399. [ 0.485400] usbcore: registered new interface driver ftdi_sio
  400. [ 0.485435] usbserial: USB Serial support registered for FTDI USB Serial Device
  401. [ 0.485589] usbcore: registered new interface driver keyspan
  402. [ 0.485625] usbserial: USB Serial support registered for Keyspan - (without firmware)
  403. [ 0.485659] usbserial: USB Serial support registered for Keyspan 1 port adapter
  404. [ 0.485694] usbserial: USB Serial support registered for Keyspan 2 port adapter
  405. [ 0.485751] usbserial: USB Serial support registered for Keyspan 4 port adapter
  406. [ 0.485811] usbcore: registered new interface driver option
  407. [ 0.485847] usbserial: USB Serial support registered for GSM modem (1-port)
  408. [ 0.486043] usbcore: registered new interface driver oti6858
  409. [ 0.486079] usbserial: USB Serial support registered for oti6858
  410. [ 0.486135] usbcore: registered new interface driver pl2303
  411. [ 0.486171] usbserial: USB Serial support registered for pl2303
  412. [ 0.486236] usbcore: registered new interface driver qcserial
  413. [ 0.486271] usbserial: USB Serial support registered for Qualcomm USB modem
  414. [ 0.486343] usbcore: registered new interface driver sierra
  415. [ 0.486379] usbserial: USB Serial support registered for Sierra USB modem
  416. [ 0.487444] usbcore: registered new interface driver iforce
  417. [ 0.487531] usbcore: registered new interface driver xpad
  418. [ 0.488023] usbcore: registered new interface driver usbtouchscreen
  419. [ 0.488829] i2c /dev entries driver
  420. [ 0.489650] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  421. [ 0.489660] fan53555-regulator 0-0040: using device tree for GPIO lookup
  422. [ 0.489690] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  423. [ 0.490072] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  424. [ 0.490090] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  425. [ 0.490138] fan53555-reg: supplied by vcc_sys
  426. [ 0.490148] vcc_sys: could not add device link regulator.11 err -2
  427. [ 0.491500] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV
  428. [ 0.491902] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  429. [ 0.491923] vcc1v8_sdio: unable to resolve supply
  430. [ 0.491932] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  431. [ 0.491948] vcc1v8_wifi: unable to resolve supply
  432. [ 0.492179] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  433. [ 0.492187] fan53555-regulator 0-0041: using device tree for GPIO lookup
  434. [ 0.492212] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  435. [ 0.492557] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  436. [ 0.492571] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  437. [ 0.492609] fan53555-reg: supplied by vcc_sys
  438. [ 0.492618] vcc_sys: could not add device link regulator.12 err -2
  439. [ 0.494113] vdd_gpu: 712 <--> 1500 mV at 1000 mV
  440. [ 0.494455] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  441. [ 0.494475] vcc1v8_sdio: unable to resolve supply
  442. [ 0.494483] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  443. [ 0.494499] vcc1v8_wifi: unable to resolve supply
  444. [ 0.495081] rk808 0-001b: Pmic Chip id: 0x0
  445. [ 0.498128] rk808 0-001b: GPIO lookup for consumer dvs
  446. [ 0.498137] rk808 0-001b: using device tree for GPIO lookup
  447. [ 0.498147] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  448. [ 0.498156] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  449. [ 0.498163] rk808 0-001b: using lookup tables for GPIO lookup
  450. [ 0.498171] rk808 0-001b: lookup for GPIO dvs failed
  451. [ 0.498179] rk808-regulator rk808-regulator: there is no dvs0 gpio
  452. [ 0.498186] rk808 0-001b: GPIO lookup for consumer dvs
  453. [ 0.498193] rk808 0-001b: using device tree for GPIO lookup
  454. [ 0.498201] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  455. [ 0.498209] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  456. [ 0.498216] rk808 0-001b: using lookup tables for GPIO lookup
  457. [ 0.498222] rk808 0-001b: lookup for GPIO dvs failed
  458. [ 0.498230] rk808-regulator rk808-regulator: there is no dvs1 gpio
  459. [ 0.498268] rk808 0-001b: Looking up vcc1-supply from device tree
  460. [ 0.498319] DCDC_REG1: supplied by vcc_sys
  461. [ 0.498328] vcc_sys: could not add device link regulator.13 err -2
  462. [ 0.498783] vdd_center: 900 mV
  463. [ 0.498990] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  464. [ 0.499009] vcc1v8_sdio: unable to resolve supply
  465. [ 0.499017] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  466. [ 0.499033] vcc1v8_wifi: unable to resolve supply
  467. [ 0.499076] rk808 0-001b: Looking up vcc2-supply from device tree
  468. [ 0.499112] DCDC_REG2: supplied by vcc_sys
  469. [ 0.499120] vcc_sys: could not add device link regulator.14 err -2
  470. [ 0.499408] vdd_cpu_l: 750 <--> 1350 mV at 900 mV
  471. [ 0.499616] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  472. [ 0.499635] vcc1v8_sdio: unable to resolve supply
  473. [ 0.499643] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  474. [ 0.499659] vcc1v8_wifi: unable to resolve supply
  475. [ 0.499699] rk808 0-001b: Looking up vcc3-supply from device tree
  476. [ 0.499756] DCDC_REG3: supplied by vcc_sys
  477. [ 0.499765] vcc_sys: could not add device link regulator.15 err -2
  478. [ 0.499794] vcc_ddr: at 5000 mV
  479. [ 0.499971] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  480. [ 0.499990] vcc1v8_sdio: unable to resolve supply
  481. [ 0.499998] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  482. [ 0.500014] vcc1v8_wifi: unable to resolve supply
  483. [ 0.500057] rk808 0-001b: Looking up vcc4-supply from device tree
  484. [ 0.500092] DCDC_REG4: supplied by vcc_sys
  485. [ 0.500100] vcc_sys: could not add device link regulator.16 err -2
  486. [ 0.500339] vcc_1v8: 1800 mV
  487. [ 0.500745] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  488. [ 0.500785] vcc1v8_sdio: supplied by vcc_1v8
  489. [ 0.500840] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from device tree
  490. [ 0.500863] vcc1v8_wifi: supplied by vcc_1v8
  491. [ 0.501006] rk808 0-001b: Looking up vcc6-supply from device tree
  492. [ 0.501153] LDO_REG1: supplied by vcc_sys
  493. [ 0.501166] vcc_sys: could not add device link regulator.17 err -2
  494. [ 0.502024] vcc1v8_dvp: 1800 mV
  495. [ 0.502345] rk808 0-001b: Looking up vcc6-supply from device tree
  496. [ 0.502413] LDO_REG2: supplied by vcc_sys
  497. [ 0.502424] vcc_sys: could not add device link regulator.18 err -2
  498. [ 0.503156] vcc3v0_touch: 3000 mV
  499. [ 0.503465] rk808 0-001b: Looking up vcc7-supply from device tree
  500. [ 0.503521] LDO_REG3: supplied by vcc_sys
  501. [ 0.503532] vcc_sys: could not add device link regulator.19 err -2
  502. [ 0.504254] vcc1v8_pmu: 1800 mV
  503. [ 0.504593] rk808 0-001b: Looking up vcc9-supply from device tree
  504. [ 0.504649] LDO_REG4: supplied by vcc_sys
  505. [ 0.504660] vcc_sys: could not add device link regulator.20 err -2
  506. [ 0.504842] vcc_sd: Bringing 3300000uV into 3000000-3000000uV
  507. [ 0.504970] vcc_sd: ramp_delay not set
  508. [ 0.505507] vcc_sd: 1800 <--> 3000 mV at 3000 mV
  509. [ 0.505866] rk808 0-001b: Looking up vcc9-supply from device tree
  510. [ 0.505921] LDO_REG5: supplied by vcc_sys
  511. [ 0.505934] vcc_sys: could not add device link regulator.21 err -2
  512. [ 0.506639] vcca3v0_codec: 3000 mV
  513. [ 0.506997] rk808 0-001b: Looking up vcc10-supply from device tree
  514. [ 0.507051] LDO_REG6: supplied by vcc_sys
  515. [ 0.507063] vcc_sys: could not add device link regulator.22 err -2
  516. [ 0.507771] vcc_1v5: 1500 mV
  517. [ 0.508114] rk808 0-001b: Looking up vcc7-supply from device tree
  518. [ 0.508168] LDO_REG7: supplied by vcc_sys
  519. [ 0.508180] vcc_sys: could not add device link regulator.23 err -2
  520. [ 0.508888] vcca1v8_codec: 1800 mV
  521. [ 0.509212] rk808 0-001b: Looking up vcc11-supply from device tree
  522. [ 0.509264] LDO_REG8: supplied by vcc_sys
  523. [ 0.509275] vcc_sys: could not add device link regulator.24 err -2
  524. [ 0.510006] vcc_3v0: 3000 mV
  525. [ 0.510322] rk808 0-001b: Looking up vcc8-supply from device tree
  526. [ 0.510376] SWITCH_REG1: supplied by vcc3v3_sys
  527. [ 0.510388] vcc3v3_sys: could not add device link regulator.25 err -2
  528. [ 0.510431] vcc3v3_s3: at 3300 mV
  529. [ 0.510770] rk808 0-001b: Looking up vcc12-supply from device tree
  530. [ 0.510823] SWITCH_REG2: supplied by vcc3v3_sys
  531. [ 0.510840] vcc3v3_sys: could not add device link regulator.26 err -2
  532. [ 0.510996] vcc3v3_s0: at 3300 mV
  533. [ 0.514542] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  534. [ 0.515015] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096d2000
  535. [ 0.515938] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096d4000
  536. [ 0.517034] fusb302 4-0022: GPIO lookup for consumer int-n
  537. [ 0.517045] fusb302 4-0022: using device tree for GPIO lookup
  538. [ 0.517086] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  539. [ 0.517119] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  540. [ 0.517129] fusb302 4-0022: using device tree for GPIO lookup
  541. [ 0.517161] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  542. [ 0.517190] fusb302 4-0022: GPIO lookup for consumer vbus-other
  543. [ 0.517200] fusb302 4-0022: using device tree for GPIO lookup
  544. [ 0.517211] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  545. [ 0.517223] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  546. [ 0.517232] fusb302 4-0022: using lookup tables for GPIO lookup
  547. [ 0.517243] fusb302 4-0022: lookup for GPIO vbus-other failed
  548. [ 0.517254] fusb302 4-0022: GPIO lookup for consumer discharge
  549. [ 0.517263] fusb302 4-0022: using device tree for GPIO lookup
  550. [ 0.517274] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  551. [ 0.517285] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  552. [ 0.517294] fusb302 4-0022: using lookup tables for GPIO lookup
  553. [ 0.517303] fusb302 4-0022: lookup for GPIO discharge failed
  554. [ 0.517515] fusb302 4-0022: Can't get property of role, set role to default DRP
  555. [ 0.526010] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  556. [ 0.526058] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80096d6000
  557. [ 0.527605] lirc_dev: IR Remote Control driver registered, major 241
  558. [ 0.527620] IR NEC protocol handler initialized
  559. [ 0.527634] IR RC5(x/sz) protocol handler initialized
  560. [ 0.527647] IR RC6 protocol handler initialized
  561. [ 0.527659] IR JVC protocol handler initialized
  562. [ 0.527672] IR Sony protocol handler initialized
  563. [ 0.527685] IR SANYO protocol handler initialized
  564. [ 0.527697] IR Sharp protocol handler initialized
  565. [ 0.527727] IR MCE Keyboard/mouse protocol handler initialized
  566. [ 0.527740] IR LIRC bridge handler initialized
  567. [ 0.527753] IR XMP protocol handler initialized
  568. [ 0.528794] rockchip-rga ff680000.rga: HW Version: 0x03.02
  569. [ 0.529131] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  570. [ 0.530216] usbcore: registered new interface driver uvcvideo
  571. [ 0.530224] USB Video Class driver (1.1.1)
  572. [ 0.531028] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  573. [ 0.531349] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  574. [ 0.531523] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  575. [ 0.531620] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  576. [ 0.531700] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  577. [ 0.534662] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  578. [ 0.534877] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  579. [ 0.535731] Bluetooth: Virtual HCI driver ver 1.5
  580. [ 0.535850] Bluetooth: HCI UART driver ver 2.3
  581. [ 0.535858] Bluetooth: HCI UART protocol H4 registered
  582. [ 0.535864] Bluetooth: HCI UART protocol ATH3K registered
  583. [ 0.535944] usbcore: registered new interface driver bfusb
  584. [ 0.536002] usbcore: registered new interface driver btusb
  585. [ 0.536013] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1
  586. [ 0.536018] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5
  587. [ 0.536023] rtk_btusb: Register usb char device interface for BT driver
  588. [ 0.536196] usbcore: registered new interface driver rtk_btusb
  589. [ 0.536752] cpu cpu0: Failed to get leakage
  590. [ 0.536777] cpu cpu0: Looking up cpu-supply from device tree
  591. [ 0.537102] cpu cpu4: Failed to get leakage
  592. [ 0.537124] cpu cpu4: Looking up cpu-supply from device tree
  593. [ 0.537417] cpu cpu0: Looking up cpu-supply from device tree
  594. [ 0.537676] cpu cpu0: Looking up cpu-supply from device tree
  595. [ 0.540083] cpu cpu4: Looking up cpu-supply from device tree
  596. [ 0.543683] sdhci: Secure Digital Host Controller Interface driver
  597. [ 0.543687] sdhci: Copyright(c) Pierre Ossman
  598. [ 0.543691] Synopsys Designware Multimedia Card Interface Driver
  599. [ 0.544110] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  600. [ 0.544133] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  601. [ 0.544145] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  602. [ 0.544173] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  603. [ 0.544193] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  604. [ 0.544219] /dwmmc@fe310000: could not find phandle
  605. [ 0.544223] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
  606. [ 0.544243] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  607. [ 0.544258] /dwmmc@fe310000: could not find phandle
  608. [ 0.544261] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
  609. [ 0.544270] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  610. [ 0.544273] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  611. [ 0.544282] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  612. [ 0.544285] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  613. [ 0.544290] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  614. [ 0.544294] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  615. [ 0.544297] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  616. [ 0.544301] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  617. [ 0.544677] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  618. [ 0.544688] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  619. [ 0.544698] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  620. [ 0.544741] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  621. [ 0.544748] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  622. [ 0.544752] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  623. [ 0.544757] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
  624. [ 0.544767] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  625. [ 0.544810] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  626. [ 0.544819] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  627. [ 0.544822] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  628. [ 0.544826] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  629. [ 0.544830] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  630. [ 0.544833] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  631. [ 0.544836] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  632. [ 0.544840] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  633. [ 0.544843] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  634. [ 0.544846] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  635. [ 0.544850] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  636. [ 0.544852] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  637. [ 0.544855] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  638. [ 0.544928] vcc_sd: unsupportable voltage range: 3300000-3000000uV
  639. [ 0.544936] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  640. [ 0.544941] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  641. [ 0.555872] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  642. [ 0.566888] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  643. [ 0.567157] sdhci-pltfm: SDHCI platform and OF driver helper
  644. [ 0.567746] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  645. [ 0.567754] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  646. [ 0.567762] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  647. [ 0.567769] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  648. [ 0.567775] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  649. [ 0.567782] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  650. [ 0.568877] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  651. [ 0.568886] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  652. [ 0.568920] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  653. [ 0.568927] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  654. [ 0.568941] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  655. [ 0.568946] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  656. [ 0.594739] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  657. [ 0.595599] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
  658. [ 0.595808] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
  659. [ 0.596085] ledtrig-cpu: registered to indicate activity on CPUs
  660. [ 0.596150] hidraw: raw HID events driver (C) Jiri Kosina
  661. [ 0.599457] usbcore: registered new interface driver usbhid
  662. [ 0.599464] usbhid: USB HID core driver
  663. [ 0.601337] usbcore: registered new interface driver snd-usb-audio
  664. [ 0.602214] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@11[0]'
  665. [ 0.602225] es8316 1-0011: Can not read property spk_ctl_gpio
  666. [ 0.602269] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0)
  667. [ 0.608403] ip_tables: (C) 2000-2006 Netfilter Core Team
  668. [ 0.608515] Initializing XFRM netlink socket
  669. [ 0.609084] NET: Registered protocol family 10
  670. [ 0.609994] NET: Registered protocol family 17
  671. [ 0.610012] NET: Registered protocol family 15
  672. [ 0.610394] Bluetooth: RFCOMM socket layer initialized
  673. [ 0.610405] Bluetooth: RFCOMM ver 1.11
  674. [ 0.610414] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  675. [ 0.610420] Bluetooth: HIDP socket layer initialized
  676. [ 0.610449] lib80211: common routines for IEEE802.11 drivers
  677. [ 0.610453] lib80211_crypt: registered algorithm 'NULL'
  678. [ 0.610458] [WLAN_RFKILL]: Enter rfkill_wlan_init
  679. [ 0.610691] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  680. [ 0.610744] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6359sa
  681. [ 0.610747] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  682. [ 0.610750] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  683. [ 0.610755] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  684. [ 0.610759] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  685. [ 0.610762] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  686. [ 0.610786] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  687. [ 0.610789] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  688. [ 0.610795] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  689. [ 0.610798] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  690. [ 0.610803] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  691. [ 0.610831] [BT_RFKILL]: Enter rfkill_rk_init
  692. [ 0.611019] [BT_RFKILL]: Enter rfkill_rk_probe
  693. [ 0.611032] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  694. [ 0.611035] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  695. [ 0.611040] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  696. [ 0.611049] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  697. [ 0.611051] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  698. [ 0.611061] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  699. [ 0.611064] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  700. [ 0.611072] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  701. [ 0.611075] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  702. [ 0.611085] [RK808]: clkout2_prepare
  703. [ 0.612136] [BT_RFKILL]: init gpio
  704. [ 0.612170] [BT_RFKILL]: Request irq for bt wakeup host
  705. [ 0.612212] [BT_RFKILL]: ** disable irq
  706. [ 0.612217] [BT_RFKILL]: setup rfkill
  707. [ 0.612311] [BT_RFKILL]: bt_default device registered.
  708. [ 0.612369] Key type dns_resolver registered
  709. [ 0.613342] Registered cp15_barrier emulation handler
  710. [ 0.613538] Registered setend emulation handler
  711. [ 0.614865] Loading compiled-in X.509 certificates
  712. [ 0.615343] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
  713. [ 0.615349] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  714. [ 0.615611] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply from device tree
  715. [ 0.615616] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  716. [ 0.615626] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
  717. [ 0.615813] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
  718. [ 0.615874] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2
  719. [ 0.616414] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
  720. [ 0.616420] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  721. [ 0.616482] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  722. [ 0.616486] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  723. [ 0.617073] rockchip-drm display-subsystem: dmc is disabled
  724. [ 0.617374] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008df0720)
  725. [ 0.617476] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008df0720)
  726. [ 0.617750] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  727. [ 0.617811] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  728. [ 0.618590] Registered IR keymap rc-cec
  729. [ 0.618747] input: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0/input0
  730. [ 0.618841] rc0: RC for dw_hdmi as /devices/platform/ff940000.hdmi/rc/rc0
  731. [ 0.619035] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008de64b8)
  732. [ 0.619467] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  733. [ 0.619471] cdn-dp fec00000.dp: Falling back to user helper
  734. [ 0.619520] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008de74a8)
  735. [ 0.619524] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  736. [ 0.619527] [drm] No driver support for vblank timestamp query.
  737. [ 0.619586] rockchip-drm display-subsystem: failed to parse loader memory
  738. [ 0.619615] rockchip-drm display-subsystem: No connectors reported connected with modes
  739. [ 0.619621] [drm] Cannot find any crtc or sizes - going 1024x768
  740. [ 0.619860] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  741. [ 0.620410] vcc_sd: ramp_delay not set
  742. [ 0.620439] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
  743. [ 0.626148] Console: switching to colour frame buffer device 128x48
  744. [ 0.628693] rockchip-drm display-subsystem: fb0: frame buffer device
  745. [ 0.637358] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  746. [ 0.637518] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
  747. [ 0.637627] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  748. [ 0.637657] xhci-hcd xhci-hcd.7.auto: irq 229, io mem 0xfe800000
  749. [ 0.637754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  750. [ 0.637758] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  751. [ 0.637762] usb usb3: Product: xHCI Host Controller
  752. [ 0.637765] usb usb3: Manufacturer: Linux 4.4.169 xhci-hcd
  753. [ 0.637768] usb usb3: SerialNumber: xhci-hcd.7.auto
  754. [ 0.638067] hub 3-0:1.0: USB hub found
  755. [ 0.638082] hub 3-0:1.0: 1 port detected
  756. [ 0.638218] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  757. [ 0.638288] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
  758. [ 0.638316] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  759. [ 0.638355] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  760. [ 0.638359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  761. [ 0.638362] usb usb4: Product: xHCI Host Controller
  762. [ 0.638365] usb usb4: Manufacturer: Linux 4.4.169 xhci-hcd
  763. [ 0.638368] usb usb4: SerialNumber: xhci-hcd.7.auto
  764. [ 0.638623] hub 4-0:1.0: USB hub found
  765. [ 0.638639] hub 4-0:1.0: 1 port detected
  766. [ 0.639274] xhci-hcd xhci-hcd.7.auto: remove, state 1
  767. [ 0.639285] usb usb4: USB disconnect, device number 1
  768. [ 0.645656] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  769. [ 0.658166] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
  770. [ 0.658171] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
  771. [ 0.658190] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
  772. [ 0.658274] xhci-hcd xhci-hcd.7.auto: remove, state 1
  773. [ 0.658284] usb usb3: USB disconnect, device number 1
  774. [ 0.658599] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
  775. [ 0.662851] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  776. [ 0.662949] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
  777. [ 0.663062] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  778. [ 0.663091] xhci-hcd xhci-hcd.8.auto: irq 230, io mem 0xfe900000
  779. [ 0.663163] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  780. [ 0.663167] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  781. [ 0.663170] usb usb3: Product: xHCI Host Controller
  782. [ 0.663173] usb usb3: Manufacturer: Linux 4.4.169 xhci-hcd
  783. [ 0.663176] usb usb3: SerialNumber: xhci-hcd.8.auto
  784. [ 0.663434] hub 3-0:1.0: USB hub found
  785. [ 0.663450] hub 3-0:1.0: 1 port detected
  786. [ 0.663588] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  787. [ 0.663670] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
  788. [ 0.663696] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  789. [ 0.663751] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  790. [ 0.663755] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  791. [ 0.663758] usb usb4: Product: xHCI Host Controller
  792. [ 0.663761] usb usb4: Manufacturer: Linux 4.4.169 xhci-hcd
  793. [ 0.663764] usb usb4: SerialNumber: xhci-hcd.8.auto
  794. [ 0.663976] hub 4-0:1.0: USB hub found
  795. [ 0.663989] hub 4-0:1.0: 1 port detected
  796. [ 0.667722] ehci-platform fe380000.usb: EHCI Host Controller
  797. [ 0.667801] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  798. [ 0.667874] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  799. [ 0.673832] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  800. [ 0.673949] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  801. [ 0.673953] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  802. [ 0.673957] usb usb5: Product: EHCI Host Controller
  803. [ 0.673961] usb usb5: Manufacturer: Linux 4.4.169 ehci_hcd
  804. [ 0.673963] usb usb5: SerialNumber: fe380000.usb
  805. [ 0.674223] hub 5-0:1.0: USB hub found
  806. [ 0.674236] hub 5-0:1.0: 1 port detected
  807. [ 0.674655] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  808. [ 0.674759] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
  809. [ 0.674829] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  810. [ 0.729990] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  811. [ 0.729998] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  812. [ 0.730005] usb usb6: Product: Generic Platform OHCI controller
  813. [ 0.730010] usb usb6: Manufacturer: Linux 4.4.169 ohci_hcd
  814. [ 0.730016] usb usb6: SerialNumber: fe3a0000.usb
  815. [ 0.730616] hub 6-0:1.0: USB hub found
  816. [ 0.730641] hub 6-0:1.0: 1 port detected
  817. [ 0.731563] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
  818. [ 0.731571] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
  819. [ 0.731593] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
  820. [ 0.732476] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  821. [ 0.732513] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  822. [ 0.732525] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  823. [ 0.732554] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  824. [ 0.732579] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  825. [ 0.732658] /dwmmc@fe310000: could not find phandle
  826. [ 0.732665] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
  827. [ 0.732701] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  828. [ 0.732750] /dwmmc@fe310000: could not find phandle
  829. [ 0.732756] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
  830. [ 0.732771] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  831. [ 0.732777] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  832. [ 0.732791] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  833. [ 0.732797] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  834. [ 0.732805] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  835. [ 0.732812] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  836. [ 0.732818] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  837. [ 0.732825] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  838. [ 0.732874] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  839. [ 0.743877] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  840. [ 0.754863] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  841. [ 0.755950] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
  842. [ 0.755959] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
  843. [ 0.786503] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 89
  844. [ 0.786534] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  845. [ 0.787130] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  846. [ 0.789502] mmcblk0: p1 p2 p3
  847. [ 0.801984] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  848. [ 0.803516] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  849. [ 0.805046] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  850. [ 0.807800] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  851. [ 0.862173] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  852. [ 0.872410] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
  853. [ 0.875258] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  854. [ 0.875285] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  855. [ 0.876003] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  856. [ 0.876198] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file
  857. [ 0.876207] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file
  858. [ 0.876222] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
  859. [ 0.876230] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
  860. [ 0.876247] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
  861. [ 0.876256] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
  862. [ 0.878190] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
  863. [ 0.878198] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
  864. [ 0.878429] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  865. [ 0.878436] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  866. [ 0.878442] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
  867. [ 0.878449] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
  868. [ 0.878602] asoc-simple-card: probe of spdif-sound failed with error -22
  869. [ 0.880094] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.9 (r)
  870. [ 0.880101] ======== dhd_wlan_init_plat_data ========
  871. [ 0.880104] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  872. [ 0.880110] dhd_wlan_init_gpio: WL_REG_ON=-1, WL_HOST_WAKE=-1
  873. [ 0.880113] dhd_wlan_init_gpio: oob_irq=70, oob_irq_flags=0x414
  874. [ 0.880116] dhd_wifi_platform_load: Enter
  875. [ 0.880129] Power-up adapter 'DHD generic adapter'
  876. [ 0.881315] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:11 UTC (1358499011)
  877. [ 0.890250] wifi_platform_set_power = 1
  878. [ 0.890258] ======== PULL WL_REG_ON(-1) HIGH! ========
  879. [ 0.890261] [WLAN_RFKILL]: rockchip_wifi_power: 1
  880. [ 0.890265] [WLAN_RFKILL]: wifi turn on power. -1
  881. [ 0.932778] vcc3v3_pcie: disabling
  882. [ 0.932785] vcc1v8_wifi: disabling
  883. [ 0.933193] rk-keypad rockchip-key: no io-channels defined
  884. [ 0.933232] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  885. [ 0.933242] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  886. [ 0.933335] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
  887. [ 0.934257] ALSA device list:
  888. [ 0.934261] #0: ES8316
  889. [ 0.945065] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  890. [ 0.945110] VFS: Mounted root (ext4 filesystem) on device 179:2.
  891. [ 0.945675] devtmpfs: mounted
  892. [ 0.946133] Freeing unused kernel memory: 1088K
  893. [ 1.088971] systemd[1]: System time before build time, advancing clock.
  894. [ 1.097323] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  895. [ 1.104467] random: systemd: uninitialized urandom read (16 bytes read, 47 bits of entropy available)
  896. [ 1.105945] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  897. [ 1.106247] systemd[1]: Detected architecture arm64.
  898. [ 1.106734] systemd[1]: Set hostname to <localhost>.
  899. [ 1.116331] random: systemd: uninitialized urandom read (16 bytes read, 47 bits of entropy available)
  900. [ 1.124431] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 48 bits of entropy available)
  901. [ 1.124553] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 48 bits of entropy available)
  902. [ 1.128701] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 48 bits of entropy available)
  903. [ 1.131564] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 48 bits of entropy available)
  904. [ 1.172612] random: systemd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
  905. [ 1.173044] random: systemd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
  906. [ 1.173170] random: systemd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
  907. [ 1.173390] random: systemd: uninitialized urandom read (16 bytes read, 51 bits of entropy available)
  908. [ 1.190745] wifi_platform_bus_enumerate device present 1
  909. [ 1.190757] ======== Card detection to detect SDIO card! ========
  910. [ 1.190763] mmc2:mmc host rescan start!
  911. [ 1.206884] bcmsdh_register: register client driver
  912. [ 1.207041] bcmsdh_sdmmc_probe: Enter num=1
  913. [ 1.207175] bcmsdh_sdmmc_probe: Enter num=2
  914. [ 1.207180] bus num (host idx)=2, slot num (rca)=1
  915. [ 1.207185] found adapter info 'DHD generic adapter'
  916. [ 1.207264] sdioh_attach: set sd_f2_blocksize 256
  917. [ 1.207334] sdioh_attach: sd clock rate = 0
  918. [ 1.207776] dhdsdio_probe : no mutex held. set lock
  919. [ 1.207900] F1 signature read @0x18000000=0x17294359
  920. [ 1.212122] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  921. [ 1.212786] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  922. [ 1.212859] dhd_conf_set_chiprev: chip=0x4359, chiprev=9
  923. [ 1.213063] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
  924. [ 1.213632] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
  925. [ 1.213786] wl_escan_attach: Enter
  926. [ 1.213813] wl_escan_init: Enter
  927. [ 1.213892] wl_create_event_handler(): thread:wl_escan_handler:a8 started
  928. [ 1.213899] tsk Enter, tsk = 0xffffffc07b2701b0
  929. [ 1.213931] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
  930. [ 1.214090] dhd_attach(): thread:dhd_watchdog_thread:a9 started
  931. [ 1.214165] dhd_attach(): thread:dhd_dpc:aa started
  932. [ 1.214307] dhd_attach(): thread:dhd_rxf:ab started
  933. [ 1.214317] dhd_deferred_work_init: work queue initialized
  934. [ 1.214341] dhd_bus_set_default_min_res_mask: Unhandled chip id
  935. [ 1.214627] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  936. [ 1.230473] Dongle Host Driver, version 1.579.77.41.9 (r)
  937. [ 1.231021] wl_ext_iapsta_attach_netdev: bssidx=0
  938. [ 1.231031] Register interface [wlan0] MAC: ac:83:f3:e6:1f:b2
  939.  
  940. [ 1.231638] dhd_wl_ioctl: returning as busstate=0
  941. [ 1.231646] dhd_dbg_detach_pkt_monitor, 2204
  942. [ 1.231653] dhd_bus_devreset: == Power OFF ==
  943. [ 1.232019] bcmsdh_oob_intr_unregister: Enter
  944. [ 1.232024] bcmsdh_oob_intr_unregister: irq is not registered
  945. [ 1.232034] dhd_txglom_enable: enable 0
  946. [ 1.232040] dhd_conf_set_txglom_params: txglom_mode=copy
  947. [ 1.232044] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
  948. [ 1.232049] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
  949. [ 1.232053] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  950. [ 1.232057] dhd_bus_devreset: WLAN OFF DONE
  951. [ 1.232137] wifi_platform_set_power = 0
  952. [ 1.232142] ======== PULL WL_REG_ON(-1) LOW! ========
  953. [ 1.232147] [WLAN_RFKILL]: rockchip_wifi_power: 0
  954. [ 1.232166] [WLAN_RFKILL]: wifi shut off power.
  955. [ 1.232171] dhdsdio_probe : the lock is released.
  956. [ 1.232335] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110
  957. [ 1.232384] dhd_module_init: Exit err=0
  958. [ 1.262215] systemd[1]: Configuration file /lib/systemd/system/partition-bootup.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  959. [ 1.267310] systemd[1]: Listening on Syslog Socket.
  960. [ 1.267485] systemd[1]: Listening on udev Control Socket.
  961. [ 1.267743] systemd[1]: Created slice System Slice.
  962. [ 1.267926] systemd[1]: Created slice system-getty.slice.
  963. [ 1.268016] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  964. [ 1.272311] systemd[1]: Listening on Journal Socket (/dev/log).
  965. [ 1.272440] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  966. [ 1.272510] systemd[1]: Listening on udev Kernel Socket.
  967. [ 1.273653] systemd[1]: Mounting Debug File System...
  968. [ 1.273910] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  969. [ 1.273991] systemd[1]: Reached target Paths.
  970. [ 1.274177] systemd[1]: Listening on Journal Socket.
  971. [ 1.275491] systemd[1]: Starting Journal Service...
  972. [ 1.282569] systemd[1]: Starting Load Kernel Modules...
  973. [ 1.285866] systemd[1]: Starting Restore / save the current clock...
  974. [ 1.288096] systemd[1]: Starting Create Static Device Nodes in /dev...
  975. [ 1.294992] systemd[1]: Reached target Remote File Systems.
  976. [ 1.297043] systemd[1]: Starting Remount Root and Kernel File Systems...
  977. [ 1.297241] systemd[1]: Reached target Swap.
  978. [ 1.297743] systemd[1]: Created slice User and Session Slice.
  979. [ 1.297855] systemd[1]: Reached target Slices.
  980. [ 1.297985] systemd[1]: Reached target Encrypted Volumes.
  981. [ 1.300780] systemd[1]: Mounted Debug File System.
  982. [ 1.301382] systemd[1]: Started Load Kernel Modules.
  983. [ 1.307967] systemd[1]: Mounting Configuration File System...
  984. [ 1.312599] systemd[1]: Mounting FUSE Control File System...
  985. [ 1.314612] systemd[1]: Starting Apply Kernel Variables...
  986. [ 1.315603] systemd[1]: Started Remount Root and Kernel File Systems.
  987. [ 1.324991] systemd[1]: Starting Load/Save Random Seed...
  988. [ 1.330862] systemd[1]: Starting udev Coldplug all Devices...
  989. [ 1.335796] systemd[1]: Mounted FUSE Control File System.
  990. [ 1.335882] systemd[1]: Mounted Configuration File System.
  991. [ 1.340950] systemd[1]: Time has been changed
  992. [ 1.341858] systemd[1]: Started Restore / save the current clock.
  993. [ 1.346687] systemd[1]: Started Load/Save Random Seed.
  994. [ 1.347856] systemd[1]: Started Apply Kernel Variables.
  995. [ 1.351551] systemd[1]: Started Create Static Device Nodes in /dev.
  996. [ 1.353363] systemd[1]: Starting udev Kernel Device Manager...
  997. [ 1.353474] systemd[1]: Reached target Local File Systems (Pre).
  998. [ 1.353601] systemd[1]: Reached target Local File Systems.
  999. [ 1.358133] systemd[1]: Starting Raise network interfaces...
  1000. [ 1.395578] systemd[1]: Started udev Kernel Device Manager.
  1001. [ 1.450215] systemd[1]: Started Journal Service.
  1002. [ 1.470289] systemd-journald[174]: Received request to flush runtime journal from PID 1
  1003. [ 1.609560] cdn-dp fec00000.dp: [drm:cdn_dp_request_firmware] *ERROR* failed to request firmware: -11
  1004. [ 1.667620] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  1005. [ 1.667630] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  1006. [ 1.667653] ff100000.saradc supply vref not found, using dummy regulator
  1007. [ 1.788269] phy phy-pcie-phy.9: Looking up phy-supply from device tree
  1008. [ 1.788278] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
  1009. [ 1.789248] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  1010. [ 1.789255] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  1011. [ 1.789269] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  1012. [ 1.789392] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  1013. [ 1.789448] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  1014. [ 1.789452] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
  1015. [ 1.789471] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  1016. [ 1.789475] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  1017. [ 1.789479] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
  1018. [ 1.789488] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  1019. [ 1.809756] rockchip-pcie f8000000.pcie: invalid power supply
  1020. [ 1.829672] mali ff9a0000.gpu: Looking up mali-supply from device tree
  1021. [ 1.829994] mali ff9a0000.gpu: Failed to get leakage
  1022. [ 1.830013] mali ff9a0000.gpu: Looking up mali-supply from device tree
  1023. [ 1.830037] vdd_gpu: could not add device link ff9a0000.gpu err -17
  1024. [ 1.830046] vdd_gpu: Failed to create debugfs directory
  1025. [ 1.831026] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  1026. [ 1.831367] mali ff9a0000.gpu: Protected mode not available
  1027. [ 1.834086] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  1028. [ 1.834342] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 413; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  1029. [ 1.835035] mali ff9a0000.gpu: Probed as mali0
  1030. [ 1.905013] dhd_ioctl_entry: Interface is down
  1031. [ 1.905026] Error getting the SSID
  1032. [ 1.955324] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1033. [ 1.972413] [BT_RFKILL]: Enter rfkill_rk_set_power
  1034. [ 1.972426] [BT_RFKILL]: Set blocked:1
  1035. [ 1.972429] [BT_RFKILL]: bt shut off power
  1036. [ 2.008006] dhd_open: Enter ffffffc07bf05000
  1037. [ 2.008013] dhd_open : no mutex held. set lock
  1038. [ 2.008021] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
  1039. [ 2.008027]
  1040. Dongle Host Driver, version 1.579.77.41.9 (r)
  1041. [ 2.008032] wl_ext_iapsta_attach_netdev: bssidx=0
  1042. [ 2.008035] wl_android_wifi_on in 1
  1043. [ 2.008038] wl_android_wifi_on in 2: g_wifi_on=0
  1044. [ 2.008042] wifi_platform_set_power = 1
  1045. [ 2.008045] ======== PULL WL_REG_ON(-1) HIGH! ========
  1046. [ 2.008049] [WLAN_RFKILL]: rockchip_wifi_power: 1
  1047. [ 2.008053] [WLAN_RFKILL]: wifi turn on power. -1
  1048. [ 2.156585] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  1049. [ 2.308741] sdio_reset_comm():
  1050. [ 2.309789] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  1051. [ 2.309971] rockchip-pcie: probe of f8000000.pcie failed with error -110
  1052. [ 2.310849] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]'
  1053. [ 2.310857] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]'
  1054. [ 2.311446] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
  1055. [ 2.334884] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  1056. [ 2.351829] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  1057. [ 2.423281] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  1058. [ 2.429459] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1059. [ 2.435547] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1060. [ 2.446792] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  1061. [ 2.673627] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  1062. [ 2.686501] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
  1063. [ 2.686563] sdioh_start: set sd_f2_blocksize 256
  1064. [ 2.687917]
  1065.  
  1066. dhd_bus_devreset: == WLAN ON ==
  1067. [ 2.688040] F1 signature read @0x18000000=0x17294359
  1068. [ 2.692658] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
  1069. [ 2.693631] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
  1070. [ 2.693751] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1071. [ 2.698645] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt
  1072. [ 2.698663] Final fw_path=/lib/firmware/brcm/fw_bcm4359c0_ag.bin
  1073. [ 2.698667] Final nv_path=/lib/firmware/brcm/nvram_ap6359sa.txt
  1074. [ 2.698671] Final clm_path=/lib/firmware/brcm/clm.blob
  1075. [ 2.698674] Final conf_path=/lib/firmware/brcm/config.txt
  1076. [ 2.701281] dhd_os_open_image: /lib/firmware/brcm/fw_bcm4359c0_ag.bin (576532 bytes) open success
  1077. [ 2.703392] random: nonblocking pool is initialized
  1078. [ 2.774352] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6359sa.txt (6112 bytes) open success
  1079. [ 2.777842] NVRAM version: AP6359SA_NVRAM_V1.1_20170328
  1080. [ 2.778814] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1081. [ 2.960678] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1082. [ 2.960781] si_get_pmu_reg_addr: addrRET: 18000670
  1083. [ 2.960959] bcmsdh_oob_intr_register: HW_OOB irq=70 flags=0x4
  1084. [ 2.961158] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
  1085. [ 2.961163] dhd_get_memdump_info: MEMDUMP ENABLED = 2
  1086. [ 2.964414] Disable tdls_auto_op failed. -1
  1087. [ 2.964420] dhd_preinit_ioctls: Set tcpack_sup_mode 1
  1088. [ 2.965475] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob
  1089. [ 2.966911] Firmware up: op_mode=0x0405, MAC=ac:83:f3:e6:1f:b2
  1090. [ 2.976491] Driver: 1.579.77.41.9 (r)
  1091. Firmware: wl0: Mar 6 2017 10:16:06 version 9.87.51.7 (r686312) FWID 01-4dcc75d9
  1092. CLM: 9.7.5
  1093. [ 2.976777] dhd_txglom_enable: enable 1
  1094. [ 2.976791] dhd_conf_set_txglom_params: txglom_mode=copy
  1095. [ 2.976795] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0
  1096. [ 2.976800] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
  1097. [ 2.976804] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  1098. [ 2.976817] dhd_conf_get_disable_proptx: fw_proptx=0, disable_proptx=1
  1099. [ 2.977912] dhd_pno_init: Support Android Location Service
  1100. [ 3.004957] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  1101. [ 3.004971] dhd_rtt_init : FTM is not supported
  1102. [ 3.004977] dhd_preinit_ioctls: SensorHub diabled 0
  1103. [ 3.005389] dhd_preinit_ioctls failed to set ShubHub disable
  1104. [ 3.006435] failed to set WNM capabilities
  1105. [ 3.006654] dhd_conf_set_country: set country CN, revision 38
  1106. [ 3.008833] Country code: CN (CN/38)
  1107. [ 3.010477] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23
  1108. [ 3.010689] wl_android_wifi_on: Success
  1109. [ 3.027670] dhd_open : the lock is released.
  1110. [ 3.027678] dhd_open: Exit ret=0
  1111. [ 3.618963] vendor storage:20160801 ret = -1
  1112. [ 4.001326] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
RAW Paste Data