Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Decompressing...done
- Detect CPU turbo button...
- CFE version 6.37.14.86 (r456083) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
- Build Date: 二 4月 22 16:05:16 CST 2014 (raymonddev@raymonddev-vm1210)
- Copyright (C) 2000-2008 Broadcom Corporation.
- Init Arena
- Init Devs.
- Boot partition size = 262144(0x40000)
- DDR Clock: 800 MHz
- Info: DDR frequency set from clkfreq=1000,*800*
- et1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.86 (r456083)
- CPU type 0x0: 1000MHz
- Tot mem: 262144 KBytes
- CFE mem: 0x00F00000 - 0x01795558 (9000280)
- Data: 0x00F4DBB4 - 0x00F4E080 (1228)
- BSS: 0x00F4E090 - 0x00F93558 (283848)
- Heap: 0x00F93558 - 0x01793558 (8388608)
- Stack: 0x01793558 - 0x01795558 (8192)
- Text: 0x00F00000 - 0x00F4430C (279308)
- Device eth0: hwaddr 38-D5-47-E5-A4-90, ipaddr 192.168.1.1, mask 255.255.255.0
- gateway not set, nameserver not set
- Null Rescue Flag.
- boot the image...
- go load
- Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
- Loading: TFTP Server.
- ..tftp retry wait 0
- ..tftp retry wait 1
- ..tftp retry wait 2
- ..tftp retry wait 3
- ..tftp retry wait 4
- Failed.
- Could not load :: Timeout occured
- Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
- Loading: ... 1680336 bytes read
- Entry at 0x00008000
- Closing network.
- Starting program at 0x00008000
- Uncompressing Linux... done, booting the kernel.
- Booting Linux on physical CPU 0x0
- Linux version 4.4.189 (root@linux) (gcc version 9.1.0 (OpenWrt GCC 9.1.0 r10178+1-0e1d07af1d) ) #868 SMP PREEMPT Fri Aug 23 07:02:31 +04 2019
- CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine: Northstar Prototype
- Ignoring unrecognised tag 0x00000000
- Memory policy: Data cache writealloc
- map io
- MPCORE found at 19020000 (VIRT 99020000) 18000000 98000000
- Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
- PERCPU: Embedded 11 pages/cpu @86dd4000 s12876 r8192 d23988 u45056
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
- Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Memory: 254152K/262144K available (3530K kernel code, 199K rwdata, 1236K rodata, 320K init, 363K bss, 7992K reserved, 0K cma-reserved, 131072K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0x88800000 - 0xff800000 (1904 MB)
- lowmem : 0x80000000 - 0x88000000 ( 128 MB)
- pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
- modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
- .text : 0x80008000 - 0x804afe24 (4768 kB)
- .init : 0x804b0000 - 0x80500000 ( 320 kB)
- .data : 0x80500000 - 0x80531f34 ( 200 kB)
- .bss : 0x80534000 - 0x8058ee8c ( 364 kB)
- Preemptible hierarchical RCU implementation.
- CONFIG_RCU_FANOUT set to non-default value of 2
- Build-time adjustment of leaf fanout to 2.
- NR_IRQS:256
- MPCORE GIC init
- soc_dmu_init
- add clk lookups
- MPCORE Global Timer Clock 500000000Hz on IRQ 27
- sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
- clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
- register local timer
- smp_twd: clock not found -2
- Calibrating local timer... 499.73MHz.
- Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- 2 cores has been found
- Setting up static identity map for 0x85e0 - 0x8614
- L2C: platform provided aux values permit register corruption.
- L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530000
- L2C-310 erratum 769419 enabled
- L2C-310 enabling early BRESP for Cortex-A9
- L2C-310 full line of zeros enabled for Cortex-A9
- L2C-310 dynamic clock gating enabled, standby mode enabled
- L2C-310 cache controller enabled, 16 ways, 256 kB
- L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e530001
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- Brought up 2 CPUs
- SMP: Total of 2 processors activated (3981.31 BogoMIPS).
- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- futex hash table entries: 512 (order: 3, 32768 bytes)
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- coherence_win_size = 10000000
- coherence_flag = FFFFFFF8
- ddr_phys_offset_va =FFFFFFFF
- ddr_phys_offset2_va =A8000000
- Found a AMD NAND flash:
- Total size: 128MB
- Block size: 128KB
- Page Size: 2048B
- OOB Size: 64B
- Sector size: 512B
- Spare size: 16B
- ECC level: 8 (8-bit)
- Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
- found nand nvram at 80000
- CCA UART Clock Config: Sel=1 Ovr=1 Div=48
- CCA UART Clock rate 125000000Hz CCB UART Clock rate 125000000Hz
- clocksource: Switched to clocksource mpcore_gtimer
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- init gpio code
- PCI: no core
- PCI: no core
- PCI: scanning bus 0
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
- pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
- pci_bus 0000:00: root bus resource [bus 00-ff]
- pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
- PCI: Fixing up bus 0 domain 0
- PCIE1 link=1
- PCIE1 switching to GEN2
- PCIE1 link=1
- PCI host bridge to bus 0001:00
- pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
- pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
- PCI: Fixing up bus 0 domain 1
- PCI: bus0: Fast back to back transfers disabled
- pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
- PCI: Fixing up bus 1 domain 1
- PCI: bus1: Fast back to back transfers disabled
- pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
- pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
- pci 0001:00:00.0: PCI bridge to [bus 01]
- pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
- PCIE2 link=0
- PCIE3 link=0
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- io scheduler noop registered (default)
- io scheduler cfq registered
- serial8250_init
- Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
- console [ttyS0] disabled
- serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
- console [ttyS0] enabled
- serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
- brd: module loaded
- loop: module loaded
- bcmsflash: found no supported devices
- Asus AC87U
- Boot partition size = 524288(0x80000)
- lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x3e00000, 0x20000
- found TRX Header on nflash!
- nflash: squash filesystem with lzma found at block 29
- Creating 4 MTD partitions on "nflash":
- 0x000000000000-0x000000080000 : "boot"
- 0x000000080000-0x000000200000 : "nvram"
- 0x000000200000-0x000004000000 : "linux"
- 0x0000003a0000-0x000004000000 : "rootfs"
- PPP generic driver version 2.4.2
- PPP BSD Compression module registered
- PPP Deflate Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- i2c /dev entries driver
- GACT probability NOT on
- Mirror/redirect action on
- Simple TC action Loaded
- netem: version 1.3
- u32 classifier
- Performance counters on
- input device check on
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (3971 buckets, 15884 max)
- nf_conntrack_rtsp v0.7 loading
- xt_time: kernel timezone is -0000
- ip_set: protocol 6
- gre: GRE over IPv4 demultiplexor driver
- nf_nat_rtsp v0.7 loading
- ip_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 17
- bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- Bridge firewalling registered
- 8021q: 802.1Q VLAN Support v1.8
- Registering SWP/SWPB emulation handler
- max nvram space = 131072
- read 65536 bytes to offset 0
- Key type encrypted registered
- Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
- nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
- nand: AMD/Spansion NAND 128MiB 3,3V 8-bit
- nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- Spare area=64 eccbytes 56, ecc bytes located at:
- 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
- Available 7 bytes at (off,len):
- (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
- Scanning device for bad blocks
- Options: NO_SUBPAGE_WRITE,
- Asus AC87U
- Creating 1 MTD partitions on "brcmnand":
- 0x000004000000-0x000008000000 : "ddwrt"
- VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- Freeing unused kernel memory: 320K
- start service
- starting Architecture code for northstar
- cannot open /dev/nvram
- cannot open /dev/nvram
- udevtrigger[365]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
- try modules for ethernet adapters
- et: module license 'Proprietary' taints kernel.
- Disabling lock debugging due to kernel taint
- et_module_init: passivemode set to 0x0
- et_module_init: txworkq set to 0x0
- et_module_init: et_txq_thresh set to 0xce4
- et_module_init: et_rxlazy_timeout set to 0x3e8
- et_module_init: et_rxlazy_framecnt set to 0x20
- et_module_init: et_rxlazy_dyn_thresh set to 0
- ET Corerev 5
- eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
- roboswitch: Probing device 'eth0'
- roboswitch: trying a 53012! at eth0
- detected CPU Port is 7
- workaround for RT-AC87U/RT-AC88U
- roboswitch: found a 53012! at eth0
- detected CPU Port is 7
- wl_module_init: passivemode set to 0x0
- wl_module_init: txworkq set to 0x0
- eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
- vconfig: ioctl error for add: File exists
- vconfig: ioctl error for add: File exists
- [USB] checking...
- umount: can't unmount /mnt: No such file or directory
- grep: /etc/passwd: No such file or directory
- sh: can't create /etc/passwd: nonexistent directory
- cp: can't stat '/tmp/mycron.d/*': No such file or directory
- cp: can't stat '/jffs/mycron.d/*': No such file or directory
- cp: can't stat '/mmc/mycron.d/*': No such file or directory
- eth0: mixed HW and IP checksum settings.
- cannot open /proc/sys/net/ipv4/ip_conntrack_max
- cannot open /proc/sys/net/ipv4/ip_conntrack_max
- device br0 entered promiscuous mode
- CTL_set_cist_bridge_config: Got return code 0, -1
- Couldn't find bridge with index 7
- Couldn't change bridge bridge_max_age
- CTL_set_cist_bridge_config: Got return code 0, -1
- Couldn't find bridge with index 7
- Couldn't change bridge bridge_forward_delay
- killall: ead: no process killed
- br0: Invalid argument
- device vlan1 entered promiscuous mode
- device eth0 entered promiscuous mode
- br0: Invalid argument
- wl: Not down
- wl: Not down
- total vif count 1
- eth1: Not supported
- base addr 38:D5:47:E5:A4:92
- local bit addr 3A:D5:47:E5:A4:92
- eth1: Invalid argument
- eth1: Not supported
- eth1: Not supported
- eth1: Operation not permitted
- nbw = 20
- channel 6, val 20
- 0, 1000, 0, 6
- spec 1006
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- enable bss eth1 0 (0)
- total vif count 1
- eth1: Not supported
- base addr 38:D5:47:E5:A4:92
- local bit addr 3A:D5:47:E5:A4:92
- eth1: Invalid argument
- eth1: Not supported
- eth1: Not supported
- eth1: Operation not permitted
- eth1: Invalid argument
- nbw = 20
- channel 6, val 20
- 0, 1000, 0, 6
- spec 1006
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- enable bss eth1 0 (0)
- eth1: Not supported
- eth1: Not supported
- wl: Unsupported
- device eth1 entered promiscuous mode
- sh: ead: br0: port 2(eth1) entered forwarding state
- notbr0: port 2(eth1) entered forwarding state
- fobr0: port 1(vlan1) entered forwarding state
- undbr0: port 1(vlan1) entered forwarding state
- device br0 left promiscuous mode
- device br0 entered promiscuous mode
- ifconfig: iocdevice br0 left promiscuous mode
- tl 0x8914 failed: Address not available
- Daemon Successfully forked (pid: 786)
- rpc_qcsapi_init(0x0085): #1 attempt to create RPC connection
- wl: wl driver adapter not found
- wl: wl driver adapter not found
- nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- device vlan2 entered promiscuous mode
- rmmod: eoip: No such file or directory
- random: dnsmasq: uninitialized urandom read (128 bytes read, 60 bits of entropy available)
- random: dnsmasq: uninitialized urandom read (48 bytes read, 60 bits of entropy available)
- cat: can't open '/proc/sys/net/netfilter/nf_conntrack_flush': No such file or directory
- device vlan2 left promiscuous mode
- udhcpc: started, v1.31.0
- udhcpc: sending discover
- total vif count 1
- eth1: Not supported
- base addr 38:D5:47:E5:A4:92
- local bit addr 3A:D5:47:E5:A4:92
- eth1: Invalid argument
- eth1: Not supported
- eth1: Not supported
- eth1: Operation not permitted
- eth1: Invalid argument
- nbw = 20
- channel 6, val 20
- 0, 1000, 0, 6
- spec 1006
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- enable bss eth1 0 (0)
- total vif count 1
- eth1: Not supported
- base addr 38:D5:47:E5:A4:92
- local bit addr 3A:D5:47:E5:A4:92
- eth1: Invalid argument
- eth1: Not supported
- eth1: Not supported
- eth1: Operation not permitted
- eth1: Invalid argument
- nbw = 20
- channel 6, val 20
- 0, 1000, 0, 6
- spec 1006
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- eth1: Not supported
- enable bss eth1 0 (0)
- eth1: Not supported
- eth1: Not supported
- wl: Unsupported
- wl: wl driver adapter not found
- random: nonblocking pool is initialized
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- udhcpc: sending discover
- rpc_qcsapi_init(0x0085): #2 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- udhcpc: sending discover
- rpc_qcsapi_init(0x0085): #3 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- br0: port 2(eth1) entered forwarding state
- br0: port 1(vlan1) entered forwarding state
- rpc_qcsapi_init(0x0085): #4 attempt to create RPC connection
- nvram was changed, needs commit, waiting 10 sec.
- /opt/etc/init.d/rcS: No such file or directory
- /jffs/etc/init.d/rcS: No such file or directory
- /mmc/etc/init.d/rcS: No such file or directory
- killall: proxywatchdog.sh: no process killed
- /mnt/smbshare
- umount: can't unmount /mnt/smbshare: No such file or directory
- rmmod: cifs: No such file or directory
- rmmod: fscache: No such file or directory
- killall: schedulerb.sh: no process killed
- killall: shatd: no process killed
- killall: wdswatchdog.sh: no process killed
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- rpc_qcsapi_init(0x0085): #5 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- rpc_qcsapi_init(0x0085): #6 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- rpc_qcsapi_init(0x0085): #7 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- rpc_qcsapi_init(0x0085): #8 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- rpc_qcsapi_init(0x0085): #9 attempt to create RPC connection
- 169.254.39.149: RPC: Port mapper failure - RPC: Unable to receive
- rpc_qcsapi_init(0x0085): #10 attempt to create RPC connection
- 169.254.39.149: RPC: Program not registered
- rpc_qcsapi_init(0x0085): #11 attempt to create RPC connection
- qtn_monitor_main(0x00bd): Qcsapi qcsapi init takes 38 seconds
- qtn_monitor_main(0x00c3): [QTN] update router_command.sh from brcm to qtn
- rpc_qcsapi_set_SSID_broadcast(0x00e1): Set Broadcast SSID of interface wifi0 as: TRUE
- rpc_qcsapi_set_vht(0x0110): Set wireless mode of interface wifi0 as: 11n
- rpc_qcsapi_set_beacon_type(0x0169): Set beacon type of interface wifi0 as: Basic
- rpc_qcsapi_set_WPA_encryption_modes(0x0187): Set WPA encryption mode of interface wifi0 as: AESEncryption
- rpc_qcsapi_set_key_passphrase(0x01a5): Qcsapi qcsapi_wifi_set_key_passphrase wifi0 error, return: -22
- rpc_qcsapi_set_key_passphrase(0x01a9): Qcsapi qcsapi_wifi_set_pre_shared_key wifi0 error, return: -22
- rpc_qcsapi_set_dtim(0x01bc): Qcsapi qcsapi_wifi_set_dtim wifi0 error, return: -1010
- rpc_qcsapi_set_beacon_interval(0x01d1): Set beacon_interval of interface wifi0 as: 100
- qcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultqcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultqcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultqcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultrpc_set_radio(0x0494): Qcsapi qcsapi_wifi_rfenable wifi0, return: -67
- update wl1.1_bss_enabled = bss_enabled
- rpc_update_mbss(0x0626): Qcsapi qcsapi_wifi_remove_bss wifi1 error, return: -22
- update wl1.2_bss_enabled = bss_enabled
- rpc_update_mbss(0x0626): Qcsapi qcsapi_wifi_remove_bss wifi2 error, return: -22
- update wl1.3_bss_enabled = bss_enabled
- rpc_update_mbss(0x0626): Qcsapi qcsapi_wifi_remove_bss wifi3 error, return: -22
- qtn_monitor_main(0x00d1): [sw_mode] skip start_ap_qtn, QTN will run scripts automatically
- qcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultqcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultqtn: No such device
- No such device
- qtn: No such device
- qtn: No such device
- qtn: No such device
- qcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultNo such device
- qcsapi_wifi_rfenable call failed: RPC: Can't decode result
- RPC: Can't decode resultrpc_set_radio(0x0494): Qcsapi qcsapi_wifi_rfenable wifi0, return: -67
- qtn_monitor_main(0x0100): [dbg] qtn_monitor startup
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement