API tools faq
paste
SpaceInvaders

Ubiquiti EdgeRouter X /var/log/messages

SpaceInvaders
Jun 25th, 2024
36
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.82 KB | None | 0 0
raw download clone embed print report
  1. guest@balan1:~$ cat /var/log/messages
  2. Jun 24 10:51:13 balan1 rsyslogd: set SCM_CREDENTIALS failed on '/dev/log': Protocol not available
  3. Jun 24 10:51:13 balan1 kernel: Linux version 3.10.107-UBNT (root@1fb4afed89ae) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 SMP Fri Feb 21 10:42:32 UTC 2020
  4. Jun 24 10:51:13 balan1 kernel:
  5. Jun 24 10:51:13 balan1 kernel: The CPU feqenuce set to 880 MHz
  6. Jun 24 10:51:13 balan1 kernel: GCMP present
  7. Jun 24 10:51:13 balan1 kernel: Zone ranges:
  8. Jun 24 10:51:13 balan1 kernel: DMA [mem 0x00000000-0x00ffffff]
  9. Jun 24 10:51:13 balan1 kernel: Normal [mem 0x01000000-0x0fffffff]
  10. Jun 24 10:51:13 balan1 kernel: HighMem empty
  11. Jun 24 10:51:13 balan1 kernel: Movable zone start for each node
  12. Jun 24 10:51:13 balan1 kernel: Early memory node ranges
  13. Jun 24 10:51:13 balan1 kernel: node 0: [mem 0x00000000-0x0fffffff]
  14. Jun 24 10:51:13 balan1 kernel: Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  15. Jun 24 10:51:13 balan1 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  16. Jun 24 10:51:13 balan1 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  17. Jun 24 10:51:13 balan1 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  18. Jun 24 10:51:13 balan1 kernel: Kernel command line: console=ttyS1,57600n8 ubi.mtd=7 root=ubi0_0 rootfstype=ubifs rootsqimg=squashfs.img rootsqwdir=w rw model=e50
  19. Jun 24 10:51:13 balan1 kernel: launch: starting cpu1
  20. Jun 24 10:51:13 balan1 kernel: launch: cpu1 gone!
  21. Jun 24 10:51:13 balan1 kernel: Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  22. Jun 24 10:51:13 balan1 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  23. Jun 24 10:51:13 balan1 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  24. Jun 24 10:51:13 balan1 kernel: launch: starting cpu2
  25. Jun 24 10:51:13 balan1 kernel: launch: cpu2 gone!
  26. Jun 24 10:51:13 balan1 kernel: Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  27. Jun 24 10:51:13 balan1 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  28. Jun 24 10:51:13 balan1 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  29. Jun 24 10:51:13 balan1 kernel: launch: starting cpu3
  30. Jun 24 10:51:13 balan1 kernel: launch: cpu3 gone!
  31. Jun 24 10:51:13 balan1 kernel: Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
  32. Jun 24 10:51:13 balan1 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  33. Jun 24 10:51:13 balan1 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  34. Jun 24 10:51:13 balan1 kernel: 4 CPUs re-calibrate udelay(lpj = 1167360)
  35. Jun 24 10:51:13 balan1 kernel: Ralink gpio driver initialized
  36. Jun 24 10:51:13 balan1 kernel: i2cdrv_major = 218
  37. Jun 24 10:51:13 balan1 kernel: flash manufacture id: c2, device id 20 15
  38. Jun 24 10:51:13 balan1 kernel: MX25L1605D(c2 2015c220) (2048 Kbytes)
  39. Jun 24 10:51:13 balan1 kernel: mtd .name = raspi, .size = 0x00200000 (2M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
  40. Jun 24 10:51:13 balan1 kernel: Creating 1 MTD partitions on "raspi":
  41. Jun 24 10:51:13 balan1 kernel: 0x000000000000-0x000000080000 : "SPI_FLASH"
  42. Jun 24 10:51:13 balan1 kernel: MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  43. Jun 24 10:51:13 balan1 kernel: Enable NFI Clock
  44. Jun 24 10:51:13 balan1 kernel: # MTK NAND # : Use HW ECC
  45. Jun 24 10:51:13 balan1 kernel: NAND ID [C2 DA 90 95 06, 00909506]
  46. Jun 24 10:51:13 balan1 kernel: Support this Device in MTK table! c2da
  47. Jun 24 10:51:13 balan1 kernel: [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  48. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 80 at 0x000000a00000
  49. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 436 at 0x000003680000
  50. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 611 at 0x000004c60000
  51. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 742 at 0x000005cc0000
  52. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 1049 at 0x000008320000
  53. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 1186 at 0x000009440000
  54. Jun 24 10:51:13 balan1 kernel: Bad eraseblock 1487 at 0x00000b9e0000
  55. Jun 24 10:51:13 balan1 kernel: Signature matched and data read!
  56. Jun 24 10:51:13 balan1 kernel: load_fact_bbt success 2047
  57. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
  58. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  59. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  60. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  61. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
  62. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00
  63. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  64. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  65. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  66. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  67. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  68. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
  69. Jun 24 10:51:13 balan1 kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  70. Jun 24 10:51:13 balan1 kernel: last message repeated 3 times
  71. Jun 24 10:51:13 balan1 kernel: Creating 7 MTD partitions on "MT7621-NAND":
  72. Jun 24 10:51:13 balan1 kernel: 0x000000000000-0x00000ff80000 : "ALL"
  73. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x1400, oob_buf[0] is 0x0
  74. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x6d00, oob_buf[0] is 0x0
  75. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x98c0, oob_buf[0] is 0x0
  76. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0xb980, oob_buf[0] is 0x0
  77. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x10640, oob_buf[0] is 0x0
  78. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x12880, oob_buf[0] is 0x0
  79. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x173c0, oob_buf[0] is 0x0
  80. Jun 24 10:51:13 balan1 kernel: 0x000000000000-0x000000080000 : "Bootloader"
  81. Jun 24 10:51:13 balan1 kernel: 0x000000080000-0x0000000e0000 : "Config"
  82. Jun 24 10:51:13 balan1 kernel: 0x0000000e0000-0x000000140000 : "eeprom"
  83. Jun 24 10:51:13 balan1 kernel: 0x000000140000-0x000000440000 : "Kernel"
  84. Jun 24 10:51:13 balan1 kernel: 0x000000440000-0x000000740000 : "Kernel2"
  85. Jun 24 10:51:13 balan1 kernel: 0x000000740000-0x00000ff00000 : "RootFS"
  86. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x1400, oob_buf[0] is 0x0
  87. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x6d00, oob_buf[0] is 0x0
  88. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x98c0, oob_buf[0] is 0x0
  89. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0xb980, oob_buf[0] is 0x0
  90. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x10640, oob_buf[0] is 0x0
  91. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x12880, oob_buf[0] is 0x0
  92. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x173c0, oob_buf[0] is 0x0
  93. Jun 24 10:51:13 balan1 kernel: [mtk_nand] probe successfully!
  94. Jun 24 10:51:13 balan1 kernel: UBNT BD mac ac8ba9a6a3b6 kidx 0 mrev 22 serial AC8BA9A6A3B6 type e50
  95. Jun 24 10:51:13 balan1 kernel: rdm_major = 253
  96. Jun 24 10:51:13 balan1 kernel: GMAC1_MAC_ADRH -- : 0x0000ac8b
  97. Jun 24 10:51:13 balan1 kernel: GMAC1_MAC_ADRL -- : 0xa9a6a3b6
  98. Jun 24 10:51:13 balan1 kernel: Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500!
  99. Jun 24 10:51:13 balan1 kernel: GMAC1_MAC_ADRH -- : 0x0000ac8b
  100. Jun 24 10:51:13 balan1 kernel: GMAC1_MAC_ADRL -- : 0xa9a6a3b6
  101. Jun 24 10:51:13 balan1 kernel: PROC INIT OK!
  102. Jun 24 10:51:13 balan1 kernel: Ralink I2C Init
  103. Jun 24 10:51:13 balan1 kernel: UBI: attaching mtd7 to ubi0
  104. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x1400, oob_buf[0] is 0x0
  105. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x6d00, oob_buf[0] is 0x0
  106. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x98c0, oob_buf[0] is 0x0
  107. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0xb980, oob_buf[0] is 0x0
  108. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x10640, oob_buf[0] is 0x0
  109. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x12880, oob_buf[0] is 0x0
  110. Jun 24 10:51:13 balan1 kernel: Bad block detected at 0x173c0, oob_buf[0] is 0x0
  111. Jun 24 10:51:13 balan1 kernel: UBI: scanning is finished
  112. Jun 24 10:51:13 balan1 kernel: UBI: attached mtd7 (name "RootFS", size 247 MiB) to ubi0
  113. Jun 24 10:51:13 balan1 kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  114. Jun 24 10:51:13 balan1 kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  115. Jun 24 10:51:13 balan1 kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  116. Jun 24 10:51:13 balan1 kernel: UBI: good PEBs: 1975, bad PEBs: 7, corrupted PEBs: 0
  117. Jun 24 10:51:13 balan1 kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  118. Jun 24 10:51:13 balan1 kernel: UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 2042429365
  119. Jun 24 10:51:13 balan1 kernel: UBI: available PEBs: 0, total reserved PEBs: 1975, PEBs reserved for bad PEB handling: 33
  120. Jun 24 10:51:13 balan1 kernel: UBI: background thread "ubi_bgt0d" started, PID 54
  121. Jun 24 10:51:13 balan1 kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 55
  122. Jun 24 10:51:13 balan1 kernel: UBIFS: recovery needed
  123. Jun 24 10:51:13 balan1 kernel: UBIFS: recovery completed
  124. Jun 24 10:51:13 balan1 kernel: UBIFS: mounted UBI device 0, volume 0, name "troot"
  125. Jun 24 10:51:13 balan1 kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  126. Jun 24 10:51:13 balan1 kernel: UBIFS: FS size: 244428800 bytes (233 MiB, 1925 LEBs), journal size 12189696 bytes (11 MiB, 96 LEBs)
  127. Jun 24 10:51:13 balan1 kernel: UBIFS: reserved for root: 4952683 bytes (4836 KiB)
  128. Jun 24 10:51:13 balan1 kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 132DB68E-2736-475C-9D2E-530074CF9C54, small LPT model
  129. Jun 24 10:51:13 balan1 kernel: Algorithmics/MIPS FPU Emulator v1.5
  130. Jun 24 10:51:13 balan1 kernel: ubnt_platform: module license 'Proprietary' taints kernel.
  131. Jun 24 10:51:13 balan1 kernel: Disabling lock debugging due to kernel taint
  132. Jun 24 10:51:13 balan1 kernel: Registering char device flash0 (200) succeeds
  133. Jun 24 10:51:13 balan1 kernel: Raeth v3.1 (Tasklet)
  134. Jun 24 10:51:13 balan1 kernel:
  135. Jun 24 10:51:13 balan1 kernel: phy_tx_ring = 0x00c00000, tx_ring = 0xa0c00000
  136. Jun 24 10:51:13 balan1 kernel:
  137. Jun 24 10:51:13 balan1 kernel: phy_rx_ring0 = 0x00c02000, rx_ring0 = 0xa0c02000
  138. Jun 24 10:51:13 balan1 kernel: change HW-TRAP to 0x17c8f
  139. Jun 24 10:51:13 balan1 kernel: GMAC1_MAC_ADRH -- : 0x0000ac8b
  140. Jun 24 10:51:13 balan1 kernel: GMAC1_MAC_ADRL -- : 0xa9a6a3b6
  141. Jun 24 10:51:13 balan1 kernel: eth0: ===> VirtualIF_open
  142. Jun 24 10:51:13 balan1 kernel: eth1: ===> VirtualIF_open
  143. Jun 24 10:51:13 balan1 kernel: eth2: ===> VirtualIF_open
  144. Jun 24 10:51:13 balan1 kernel: eth3: ===> VirtualIF_open
  145. Jun 24 10:51:13 balan1 kernel: eth4: ===> VirtualIF_open
  146. Jun 24 10:51:13 balan1 kernel: CDMA_CSG_CFG = 81000000
  147. Jun 24 10:51:13 balan1 kernel: GDMA1_FWD_CFG = 21710000
  148. Jun 24 10:51:13 balan1 kernel: ESW: Link Status Changed - Port1 Link UP
  149. Jun 24 10:51:13 balan1 kernel: ESW: Link Status Changed - Port2 Link UP
  150. Jun 24 10:51:13 balan1 kernel: ESW: Link Status Changed - Port2 Link Down
  151. Jun 24 10:51:13 balan1 kernel: ESW: Link Status Changed - Port0 Link UP
  152. Jun 24 10:51:13 balan1 ssh-recovery[540]: starting...
  153. Jun 24 10:51:13 balan1 kernel: Bridge firewalling registered
  154. Jun 24 10:51:13 balan1 ssh-recovery[540]: if=(all) port=(60257) terminate-timeout=(60)
  155. Jun 24 10:51:14 balan1 ssh-recovery[540]: enabling link on interfaces...
  156. Jun 24 10:51:14 balan1 kernel: eth0: ===> VirtualIF_open
  157. Jun 24 10:51:14 balan1 ssh-recovery[540]: eth0 :: mac=(ac:8b:a9:a6:a3:b6)
  158. Jun 24 10:51:14 balan1 kernel: eth1: ===> VirtualIF_open
  159. Jun 24 10:51:14 balan1 ssh-recovery[540]: eth1 :: mac=(ac:8b:a9:a6:a3:b7)
  160. Jun 24 10:51:14 balan1 kernel: eth2: ===> VirtualIF_open
  161. Jun 24 10:51:14 balan1 ssh-recovery[540]: eth2 :: mac=(ac:8b:a9:a6:a3:b8)
  162. Jun 24 10:51:14 balan1 kernel: eth3: ===> VirtualIF_open
  163. Jun 24 10:51:14 balan1 ssh-recovery[540]: eth3 :: mac=(ac:8b:a9:a6:a3:b9)
  164. Jun 24 10:51:14 balan1 kernel: eth4: ===> VirtualIF_open
  165. Jun 24 10:51:14 balan1 ssh-recovery[540]: eth4 :: mac=(ac:8b:a9:a6:a3:ba)
  166. Jun 24 10:51:14 balan1 ssh-recovery[540]: switch0 :: mac=(ac:8b:a9:a6:a3:bb)
  167. Jun 24 10:51:15 balan1 kernel: ESW: Link Status Changed - Port2 Link UP
  168. Jun 24 10:51:15 balan1 kernel: ip_set: protocol 6
  169. Jun 24 10:51:16 balan1 ssh-recovery[540]: service started :: pid=(677)
  170. Jun 24 10:51:16 balan1 kernel: Type=Linux
  171. Jun 24 10:51:17 balan1 NSM[751]: NSM-6: Initializing memdbg: ptr=0x693634 history-size=1024 memdbg-size=143552
  172. Jun 24 10:51:17 balan1 NSM[757]: NSM-6: 1000 MB
  173. Jun 24 10:51:17 NSM[757]: last message repeated 3 times
  174. Jun 24 10:51:17 balan1 NSM[757]: NSM-6: 10 MB
  175. Jun 24 10:51:17 balan1 NSM[757]: NSM-6: 10 MB
  176. Jun 24 10:51:17 balan1 RIB[761]: RIB-6: Initializing memdbg: ptr=0x5874c4 history-size=1024 memdbg-size=143552
  177. Jun 24 10:51:17 balan1 NSM[757]: NSM-4: Could not create VRF table with identifier 1 in the MPLS Forwarder
  178. Jun 24 10:51:17 balan1 RIB[764]: RIB-6: RIBd (1.2.0) starts
  179. Jun 24 10:51:22 balan1 IMI[744]: IMI-6: imi_server_send_config called (PM 1)
  180. Jun 24 10:51:22 balan1 IMI[744]: IMI-6: imi_server_send_config called (PM 42)
  181. Jun 24 10:51:25 balan1 rl-system.init: Checking/creating SSH host keys.
  182. Jun 24 10:51:28 balan1 rsyslogd: set SCM_CREDENTIALS failed on '/dev/log': Protocol not available
  183. Jun 24 10:51:28 balan1 rsyslogd: set SCM_CREDENTIALS failed on '/dev/log': Protocol not available
  184. Jun 24 10:51:45 balan1 ntpd[1718]: ntpd [email protected] Fri Feb 21 09:54:19 UTC 2020 (1)
  185. Jun 24 10:51:45 balan1 ntpd[1719]: proto: precision = 28.846 usec
  186. Jun 24 10:51:46 balan1 ntpd[1719]: ntpd exiting on signal 15
  187. Jun 24 10:51:48 balan1 ntpd[1768]: ntpd [email protected] Fri Feb 21 09:54:19 UTC 2020 (1)
  188. Jun 24 10:51:48 balan1 ntpd[1769]: proto: precision = 40.341 usec
  189. Jun 24 10:51:48 balan1 ubnt-service-ssh: waiting for netplugd to be started...
  190. Jun 24 10:51:49 balan1 ubnt-service-gui: waiting for netplugd to be started...
  191. Jun 24 10:51:51 balan1 dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
  192. Jun 24 10:51:51 balan1 dhcpd:
  193. Jun 24 10:51:51 balan1 dhcpd: No subnet declaration for eth1 (x.x.x.x-public IP).
  194. Jun 24 10:51:51 balan1 dhcpd: ** Ignoring requests on eth1. If this is not what
  195. Jun 24 10:51:51 balan1 dhcpd: you want, please write a subnet declaration
  196. Jun 24 10:51:51 balan1 dhcpd: in your dhcpd.conf file for the network segment
  197. Jun 24 10:51:51 balan1 dhcpd: to which interface eth1 is attached. **
  198. Jun 24 10:51:51 balan1 dhcpd:
  199. Jun 24 18:56:28 balan1 netplugd: Starting network plug daemon: netplugd.
  200. Jun 24 18:56:32 balan1 ubnt-service-ssh: starting the SSH service (see messages from sshd).
  201. Jun 24 18:56:32 balan1 ntpd[1769]: ntpd exiting on signal 15
  202. Jun 24 18:56:33 balan1 ubnt-service-gui: starting the GUI service.
  203. Jun 24 18:56:34 balan1 ntpd[2237]: ntpd [email protected] Fri Feb 21 09:54:19 UTC 2020 (1)
  204. Jun 24 18:56:34 balan1 ntpd[2240]: proto: precision = 41.130 usec
  205. Jun 24 18:56:46 balan1 ssh-recovery[747]: terminating the SSH recovery service :: pid=(677)
  206. Jun 24 18:58:01 balan1 kernel: ESW: Link Status Changed - Port2 Link Down
  207. guest@balan1:~$
  208.  
  209.  
  210.  
  211.  
Tags: #Networking #Ubiquiti #EdgeRouter.X #ER-x
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!