Allwinner H713 projector boot log, by alikantes

[196]HELLO! BOOT0 is starting!
[199]BOOT0 commit : 865e5927
[202]set pll start
[205]set pll end
[207]ldob fix
[209]prcm cpus timer clock enable
[212]board init ok
[214][mmc]: mmc driver ver 2021-07-13 11:09
[225][mmc]: Wrong media type 0x0
[228][mmc]: ***Try SD card 2***
[232][mmc]: mmc 2 cmd 8 timeout, err 100
[236][mmc]: mmc 2 cmd 8 err 100
[240][mmc]: mmc 2 send if cond failed
[245][mmc]: mmc 2 cmd 55 timeout, err 100
[249][mmc]: mmc 2 cmd 55 err 100
[252][mmc]: mmc 2 send app cmd failed
[256][mmc]: ***Try MMC card 2***
[410][mmc]: RMCA OK!
[413][mmc]: bias 4
[420][mmc]: MMC 5.1
[422][mmc]: HSSDR52/SDR25 8 bit
[425][mmc]: 50000000 Hz
[428][mmc]: 7456 MB
[430][mmc]: ***SD/MMC 2 init OK!!!***
[444]DRAM only have internal ZQ!!
[448]DRAM BOOT DRIVE INFO: V0.60
[451]DRAM CLK = 792 MHz
[454]DRAM Type = 3 (2:DDR2,3:DDR3)
[458]DRAMC ZQ value: 0x7b7bfb
[461]DRAM ODT value: 0x40.
[464]the id value: 0x42
[468]DRAM SIZE =1024 M
[497]DRAM simple test OK.
[500]dram size =1024
[508]nsi init ok 2020-7-12
[510]card no is 2
[512]sdcard 2 line count 8
[515][mmc]: mmc driver ver 2021-07-13 11:09
[525][mmc]: ***Try MMC card 2***
[711][mmc]: RMCA OK!
[713][mmc]: bias 4
[719][mmc]: MMC 5.1
[721][mmc]: HSSDR52/SDR25 8 bit
[725][mmc]: 50000000 Hz
[727][mmc]: 7456 MB
[729][mmc]: ***SD/MMC 2 init OK!!!***
[887]Loading boot-pkg Succeed(index=0).
[891]Entry_name        = u-boot
[906]Entry_name        = monitor
[911]Entry_name        = scp
[917]Entry_name        = optee
[925]Entry_name        = dtb
[930]tunning data addr:0x4a0003e8
[933]Jump to second Boot.
NOTICE:  BL3-1: v1.0(debug):d85c03b
NOTICE:  BL3-1: Built : 19:48:38, 2022-12-07
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
E/TC:0 0 init_external_dt:1033 Device Tree missing
M/TC: OP-TEE version: 70d6bc54 (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)m
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3