API tools faq
paste
abubaca

Untitled

abubaca
Nov 3rd, 2019
310
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.20 KB | None | 0 0
raw download clone embed print report
  1. user@user-desktop:~$ iw list
  2. Wiphy phy0
  3. max # scan SSIDs: 4
  4. max scan IEs length: 2257 bytes
  5. max # sched scan SSIDs: 0
  6. max # match sets: 0
  7. max # scan plans: 1
  8. max scan plan interval: -1
  9. max scan plan iterations: 0
  10. Retry short long limit: 2
  11. Coverage class: 0 (up to 0m)
  12. Device supports RSN-IBSS.
  13. Supported Ciphers:
  14. * WEP40 (00-0f-ac:1)
  15. * WEP104 (00-0f-ac:5)
  16. * TKIP (00-0f-ac:2)
  17. * CCMP-128 (00-0f-ac:4)
  18. * CCMP-256 (00-0f-ac:10)
  19. * GCMP-128 (00-0f-ac:8)
  20. * GCMP-256 (00-0f-ac:9)
  21. Available Antennas: TX 0 RX 0
  22. Supported interface modes:
  23. * IBSS
  24. * managed
  25. * AP
  26. * AP/VLAN
  27. * monitor
  28. * mesh point
  29. Band 1:
  30. Capabilities: 0x17e
  31. HT20/HT40
  32. SM Power Save disabled
  33. RX Greenfield
  34. RX HT20 SGI
  35. RX HT40 SGI
  36. RX STBC 1-stream
  37. Max AMSDU length: 3839 bytes
  38. No DSSS/CCK HT40
  39. Maximum RX AMPDU length 32767 bytes (exponent: 0x002)
  40. Minimum RX AMPDU time spacing: 2 usec (0x04)
  41. HT TX/RX MCS rate indexes supported: 0-7, 32
  42. Bitrates (non-HT):
  43. * 1.0 Mbps
  44. * 2.0 Mbps (short preamble supported)
  45. * 5.5 Mbps (short preamble supported)
  46. * 11.0 Mbps (short preamble supported)
  47. * 6.0 Mbps
  48. * 9.0 Mbps
  49. * 12.0 Mbps
  50. * 18.0 Mbps
  51. * 24.0 Mbps
  52. * 36.0 Mbps
  53. * 48.0 Mbps
  54. * 54.0 Mbps
  55. Frequencies:
  56. * 2412 MHz [1] (20.0 dBm)
  57. * 2417 MHz [2] (20.0 dBm)
  58. * 2422 MHz [3] (20.0 dBm)
  59. * 2427 MHz [4] (20.0 dBm)
  60. * 2432 MHz [5] (20.0 dBm)
  61. * 2437 MHz [6] (20.0 dBm)
  62. * 2442 MHz [7] (20.0 dBm)
  63. * 2447 MHz [8] (20.0 dBm)
  64. * 2452 MHz [9] (20.0 dBm)
  65. * 2457 MHz [10] (20.0 dBm)
  66. * 2462 MHz [11] (20.0 dBm)
  67. * 2467 MHz [12] (20.0 dBm)
  68. * 2472 MHz [13] (20.0 dBm)
  69. * 2484 MHz [14] (disabled)
  70. Supported commands:
  71. * new_interface
  72. * set_interface
  73. * new_key
  74. * start_ap
  75. * new_station
  76. * new_mpath
  77. * set_mesh_config
  78. * set_bss
  79. * authenticate
  80. * associate
  81. * deauthenticate
  82. * disassociate
  83. * join_ibss
  84. * join_mesh
  85. * set_tx_bitrate_mask
  86. * frame
  87. * frame_wait_cancel
  88. * set_wiphy_netns
  89. * set_channel
  90. * set_wds_peer
  91. * probe_client
  92. * set_noack_map
  93. * register_beacons
  94. * start_p2p_device
  95. * set_mcast_rate
  96. * connect
  97. * disconnect
  98. * set_qos_map
  99. * set_multicast_to_unicast
  100. Supported TX frame types:
  101. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  102. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  103. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  104. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  105. * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  106. * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  107. * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  108. * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  109. Supported RX frame types:
  110. * IBSS: 0x40 0xb0 0xc0 0xd0
  111. * managed: 0x40 0xd0
  112. * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  113. * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  114. * mesh point: 0xb0 0xc0 0xd0
  115. * P2P-client: 0x40 0xd0
  116. * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  117. * P2P-device: 0x40 0xd0
  118. software interface modes (can always be added):
  119. * AP/VLAN
  120. * monitor
  121. valid interface combinations:
  122. * #{ AP, mesh point } <= 8,
  123. total <= 8, #channels <= 1
  124. HT Capability overrides:
  125. * MCS: ff ff ff ff ff ff ff ff ff ff
  126. * maximum A-MSDU length
  127. * supported channel width
  128. * short GI for 40 MHz
  129. * max A-MPDU length exponent
  130. * min MPDU start spacing
  131. Device supports TX status socket option.
  132. Device supports HT-IBSS.
  133. Device supports SAE with AUTHENTICATE command
  134. Device supports low priority scan.
  135. Device supports scan flush.
  136. Device supports AP scan.
  137. Device supports per-vif TX power setting
  138. Driver supports full state transitions for AP/GO clients
  139. Driver supports a userspace MPM
  140. Device supports configuring vdev MAC-addr on create.
  141. user@user-desktop:~$ Wiphy phy0
  142. max # scan SSIDs: 4
  143. max scan IEs length: 2257 bytes
  144. max # sched scan SSIDs: 0
  145. max # match sets: 0
  146. max # scan plans: 1
  147. max scan plan interval: -1
  148. max scan plan iterations: 0
  149. Retry short long limit: 2
  150. Coverage class: 0 (up to 0m)
  151. Device supports RSN-IBSS.
  152. Supported Ciphers:
  153. * WEP40 (00-0f-ac:1)
  154. * WEP104 (00-0f-ac:5)
  155. * TKIP (00-0f-ac:2)
  156. * CCMP-128 (00-0f-ac:4)
  157. * CCMP-256 (00-0f-ac:10)
  158. * GCMP-128 (00-0f-ac:8)
  159. * GCMP-256 (00-0f-ac:9)
  160. Available Antennas: TX 0 RX 0
  161. Supported interface modes:
  162. * IBSS
  163. * managed
  164. * AP
  165. * AP/VLAN
  166. * monitor
  167. * mesh point
  168. Band 1:
  169. Capabilities: 0x17e
  170. HT20/HT40
  171. SM Power Save disabled
  172. RX Greenfield
  173. RX HT20 SGI
  174. RX HT40 SGI
  175. RX STBC 1-stream
  176. Max AMSDU length: 3839 bytes
  177. No DSSS/CCK HT40
  178. Maximum RX AMPDU length 32767 bytes (exponent: 0x002)
  179. Minimum RX AMPDU time spacing: 2 usec (0x04)
  180. HT TX/RX MCS rate indexes supported: 0-7, 32
  181. Bitrates (non-HT):
  182. * 1.0 Mbps
  183. * 2.0 Mbps (short preamble supported)
  184. * 5.5 Mbps (short preamble supported)
  185. * 11.0 Mbps (short preamble supported)
  186. * 6.0 Mbps
  187. * 9.0 Mbps
  188. * 12.0 Mbps
  189. * 18.0 Mbps
  190. * 24.0 Mbps
  191. * 36.0 Mbps
  192. * 48.0 Mbps
  193. * 54.0 Mbps
  194. Frequencies:
  195. * 2412 MHz [1] (20.0 dBm)
  196. * 2417 MHz [2] (20.0 dBm)
  197. * 2422 MHz [3] (20.0 dBm)
  198. * 2427 MHz [4] (20.0 dBm)
  199. * 2432 MHz [5] (20.0 dBm)
  200. * 2437 MHz [6] (20.0 dBm)
  201. * 2442 MHz [7] (20.0 dBm)
  202. * 2447 MHz [8] (20.0 dBm)
  203. * 2452 MHz [9] (20.0 dBm)
  204. * 2457 MHz [10] (20.0 dBm)
  205. * 2462 MHz [11] (20.0 dBm)
  206. * 2467 MHz [12] (20.0 dBm)
  207. * 2472 MHz [13] (20.0 dBm)
  208. * 2484 MHz [14] (disabled)
  209. Supported commands:
  210. * new_interface
  211. * set_interface
  212. * new_key
  213. * start_ap
  214. * new_station
  215. * new_mpath
  216. * set_mesh_config
  217. * set_bss
  218. * authenticate
  219. * associate
  220. * deauthenticate
  221. * disassociate
  222. * join_ibss
  223. * join_mesh
  224. * set_tx_bitrate_mask
  225. * frame
  226. * frame_wait_cancel
  227. * set_wiphy_netns
  228. * set_channel
  229. * set_wds_peer
  230. * probe_client
  231. * set_noack_map
  232. * register_beacons
  233. * start_p2p_device
  234. * set_mcast_rate
  235. * connect
  236. * disconnect
  237. * set_qos_map
  238. * set_multicast_to_unicast
  239. Supported TX frame types:
  240. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  241. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  242. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  243. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90Wiphy: команда не найдена
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!