API tools faq
paste
Advertisement
Ozols

Untitled

Ozols
Mar 8th, 2013
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.41 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 3.1.10-DRH-FOSS-3.1+ (borkata@b6c5781c-b29a-4246-8dde-4375f4fe939d) (gcc version 4.4.3 (GCC) ) #31 SMP PREEMPT Wed Mar 6 14:56:08 PST 2013
  3. [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: harmony
  6. [ 0.000000] Appending nvmem onto bank 0
  7. [ 0.000000] Tegra reserved memory:
  8. [ 0.000000] LP0: 1fd76ff0 - 1fd78fef
  9. [ 0.000000] Bootloader framebuffer: 1fd95000 - 1ffedfff
  10. [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
  11. [ 0.000000] Framebuffer: 36800000 - 36ffffff
  12. [ 0.000000] 2nd Framebuffer: 37000000 - 37ffffff
  13. [ 0.000000] Carveout: 38000000 - 3fffffff
  14. [ 0.000000] Vpr: 00000000 - 00000000
  15. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  16. [ 0.000000] Tegra SKU: 8 Rev: A03 CPU Process: 1 Core Process: 1 Speedo ID: 1
  17. [ 0.000000] Tegra Revision: A03 SKU: 0x8 CPU Process: 1 Core Process: 1
  18. [ 0.000000] L310 cache controller enabled
  19. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  20. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c12bb000 s10304 r8192 d14272 u32768
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 220928
  22. [ 0.000000] Kernel command line: zcache mem=256M@0M nvmem=256M@256M mem=512M@512M vmalloc=384M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 cpuid=200102 devicetype=1002 btmac=70fc47131a00 tegraboot=nand mtdparts=tegra_nand:16384K@9984K(misc),16384K@26880K(recovery),16384K@43776K(boot),524288K@60672K(system),462464K@585600K(cache)
  23. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  26. [ 0.000000] Memory: 871MB = 871MB total
  27. [ 0.000000] Memory: 869656k/869656k available, 178920k reserved, 367616K highmem
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  31. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  32. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc0872aac (8619 kB)
  37. [ 0.000000] .init : 0xc0873000 - 0xc08c2840 ( 319 kB)
  38. [ 0.000000] .data : 0xc08c4000 - 0xc093b4b0 ( 478 kB)
  39. [ 0.000000] .bss : 0xc093b4d4 - 0xc0ab38f0 (1506 kB)
  40. [ 0.000000] Preemptible hierarchical RCU implementation.
  41. [ 0.000000] NR_IRQS:480
  42. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  43. [ 0.002819] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
  44. [ 0.096848] pid_max: default: 32768 minimum: 301
  45. [ 0.100692] Mount-cache hash table entries: 512
  46. [ 0.104953] Initializing cgroup subsys debug
  47. [ 0.108434] Initializing cgroup subsys cpuacct
  48. [ 0.111965] Initializing cgroup subsys freezer
  49. [ 0.115292] Initializing cgroup subsys bfqio
  50. [ 0.118894] CPU: Testing write buffer coherency: ok
  51. [ 0.123659] ftrace: allocating 23467 entries in 70 pages
  52. [ 0.256501] CPU1: Booted secondary processor
  53. [ 0.258529] Brought up 2 CPUs
  54. [ 0.263961] SMP: Total of 2 processors activated (2393.70 BogoMIPS).
  55. [ 0.271550] print_constraints: dummy:
  56. [ 0.275324] NET: Registered protocol family 16
  57. [ 0.278179] host1x bus init
  58. [ 0.284551] The pingroup LCSN was configured to <UNKNOWN> instead of RSVD4
  59. [ 0.290468] Selecting UARTA as the debug console
  60. [ 0.294220] The debug console clock name is uarta
  61. [ 0.299409] ram_console: got buffer at 36700000, size 100000
  62. [ 0.305211] ram_console: found existing buffer, size 34192, start 34192
  63. [ 0.417882] console [ram-1] enabled
  64. [ 1.339782] smba_audio_register_devices++
  65. [ 1.366447] tegra_arb_init: initialized
  66. [ 1.370489] tegra_iovmm_register: added iovmm-gart
  67. [ 1.390337] bio: create slab <bio-0> at 0
  68. [ 1.394385] SCSI subsystem initialized
  69. [ 1.399335] usbcore: registered new interface driver usbfs
  70. [ 1.404056] usbcore: registered new interface driver hub
  71. [ 1.408429] usbcore: registered new device driver usb
  72. [ 1.413399] tegra-otg tegra-otg: otg transceiver registered
  73. [ 1.419276] tps6586x 4-0034: VERSIONCRC is 05
  74. [ 1.424181] Wake18 for irq=118
  75. [ 1.426206] Enabling wake18
  76. [ 1.435385] print_constraints: REG-SM_0: 725 <--> 1500 mV at 1275 mV normal standby
  77. [ 1.444986] print_constraints: REG-SM_1: 725 <--> 1500 mV at 1000 mV normal standby
  78. [ 1.455028] print_constraints: REG-SM_2: 3000 <--> 4550 mV at 3700 mV normal standby
  79. [ 1.463971] print_constraints: REG-LDO_0: 1500 <--> 3300 mV at 1200 mV normal standby
  80. [ 1.473295] print_constraints: REG-LDO_1: 725 <--> 1500 mV at 1100 mV normal standby
  81. [ 1.482048] print_constraints: REG-LDO_2: 725 <--> 1500 mV at 1275 mV normal standby
  82. [ 1.490967] print_constraints: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV normal standby
  83. [ 1.500411] print_constraints: REG-LDO_4: 1700 <--> 2475 mV at 1800 mV normal standby
  84. [ 1.508747] print_constraints: REG-LDO_5: 1250 <--> 3300 mV at 2850 mV normal standby
  85. [ 1.516811] print_constraints: REG-LDO_6: 1800 mV normal standby
  86. [ 1.525774] print_constraints: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV normal standby
  87. [ 1.534638] print_constraints: REG-LDO_8: 1250 <--> 3300 mV at 1800 mV normal standby
  88. [ 1.543119] print_constraints: REG-LDO_9: 1250 <--> 3300 mV at 2850 mV normal standby
  89. [ 1.548811] print_constraints: vdd_1v2: 1200 mV
  90. [ 1.555114] print_constraints: vdd_1v05: 1050 mV
  91. [ 1.561973] print_constraints: vdd_1v05_mode: 1050 mV
  92. [ 1.567178] tegra_camera tegra_camera.0: tegra_camera_probe
  93. [ 1.574560] _regulator_get: tegra_camera.0 supply vcsi not found, using dummy regulator
  94. [ 1.580712] Advanced Linux Sound Architecture Driver Version 1.0.24.
  95. [ 1.584086] Bluetooth: Core ver 2.16
  96. [ 1.587762] NET: Registered protocol family 31
  97. [ 1.593319] Bluetooth: HCI device and connection manager initialized
  98. [ 1.597497] Bluetooth: HCI socket layer initialized
  99. [ 1.601723] Bluetooth: L2CAP socket layer initialized
  100. [ 1.605898] Bluetooth: SCO socket layer initialized
  101. [ 1.611862] cfg80211: Calling CRDA to update world regulatory domain
  102. [ 1.615760] Switching to clocksource timer_us
  103. [ 1.619756] Switched to NOHz mode on CPU #1
  104. [ 1.626518] Switched to NOHz mode on CPU #0
  105. [ 1.637089] nvmap_page_pool_init: nvmap uc page pool size=27176 pages
  106. [ 1.676540] nvmap_page_pool_init: nvmap pool = uc, highmem=27176, pool_size=27176,totalram=217414, freeram=189553, totalhigh=91904, freehigh=64655
  107. [ 1.806602] nvmap_page_pool_init: nvmap wc page pool size=27176 pages
  108. [ 1.846268] nvmap_page_pool_init: nvmap pool = wc, highmem=27176, pool_size=27176,totalram=217414, freeram=162304, totalhigh=91904, freehigh=37406
  109. [ 1.976004] nvmap_page_pool_init: nvmap iwb page pool size=27176 pages
  110. [ 2.015783] nvmap_page_pool_init: nvmap pool = iwb, highmem=27176, pool_size=27176,totalram=217414, freeram=135086, totalhigh=91904, freehigh=10188
  111. [ 2.145979] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  112. [ 2.153488] tegra-nvmap tegra-nvmap: created carveout generic-0 (131072KiB)
  113. [ 2.158467] NET: Registered protocol family 2
  114. [ 2.165097] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  115. [ 2.172017] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  116. [ 2.179278] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  117. [ 2.186565] TCP: Hash tables configured (established 65536 bind 65536)
  118. [ 2.188853] TCP reno registered
  119. [ 2.193989] UDP hash table entries: 256 (order: 1, 8192 bytes)
  120. [ 2.199473] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  121. [ 2.203422] NET: Registered protocol family 1
  122. [ 2.208967] RPC: Registered named UNIX socket transport module.
  123. [ 2.212975] RPC: Registered udp transport module.
  124. [ 2.216842] RPC: Registered tcp transport module.
  125. [ 2.222503] RPC: Registered tcp NFSv4.1 backchannel transport module.
  126. [ 2.225356] Unpacking initramfs...
  127. [ 2.244937] Freeing initrd memory: 180K
  128. [ 2.248933] host1x host1x: initialized
  129. [ 2.253155] PMU: registered new PMU device of type 0
  130. [ 2.257509] bcb: registered reboot notifier
  131. [ 2.287592] highmem bounce pool size: 64 pages
  132. [ 2.289951] ashmem: initialized
  133. [ 2.294152] NTFS driver 2.1.30 [Flags: R/W].
  134. [ 2.297308] fuse init (API version 7.17)
  135. [ 2.302492] yaffs: yaffs built Mar 3 2013 21:31:53 Installing.
  136. [ 2.306627] io scheduler noop registered
  137. [ 2.310011] io scheduler deadline registered
  138. [ 2.312979] io scheduler cfq registered
  139. [ 2.315972] io scheduler sio registered
  140. [ 2.318953] io scheduler bfq registered
  141. [ 2.322762] io scheduler row registered (default)
  142. [ 2.325802] mpe mpe01: initialized
  143. [ 2.328736] gr3d gr3d01: initialized
  144. [ 2.331194] dsi dsi: initialized
  145. [ 2.333945] gr2d gr2d: initialized
  146. [ 2.339412] tegradc tegradc.0: probed
  147. [ 2.342392] tegradc tegradc.0: probed
  148. [ 2.349378] Wake4 for irq=303
  149. [ 2.353280] nvhdcp: using "always on" policy.
  150. [ 2.356298] tegradc tegradc.1: probed
  151. [ 2.359429] tegradc tegradc.1: probed
  152. [ 2.366140] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
  153. [ 2.398798] Registered UART port ttyHS1
  154. [ 2.405322] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
  155. [ 2.558800] Registered UART port ttyHS2
  156. [ 2.565404] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
  157. [ 2.718800] Registered UART port ttyHS3
  158. [ 2.725409] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
  159. [ 2.878800] Registered UART port ttyHS4
  160. [ 2.882049] Initialized tegra uart driver
  161. [ 2.886646] loop: module loaded
  162. [ 2.890418] lis3lv02d: 8 bits sensor found
  163. [ 2.933476] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
  164. [ 2.935948] mmc31xx driver: init
  165. [ 2.938181] [mmc31xx_probe] +
  166. [ 2.957916] [mmc31xx_probe] -
  167. [ 2.966833] tegra_nand: 2 NAND chip(s) found (vend=0xad, dev=0xdc) (Hynix NAND 512MiB 3,3V 8-bit)
  168. [ 2.973313] tegra_nand: NVIDIA Tegra NAND controller @ base=0x70008000 irq=56.
  169. [ 3.596564] 5 cmdlinepart partitions found on MTD device tegra_nand
  170. [ 3.600833] Creating 5 MTD partitions on "tegra_nand":
  171. [ 3.604806] 0x0000009c0000-0x0000019c0000 : "misc"
  172. [ 3.609774] 0x000001a40000-0x000002a40000 : "recovery"
  173. [ 3.614413] 0x000002ac0000-0x000003ac0000 : "boot"
  174. [ 3.619091] 0x000003b40000-0x000023b40000 : "system"
  175. [ 3.624344] 0x000023be0000-0x00003ff80000 : "cache"
  176. [ 3.629100] PPP generic driver version 2.4.2
  177. [ 3.633387] PPP Deflate Compression module registered
  178. [ 3.637269] PPP BSD Compression module registered
  179. [ 3.641789] PPP MPPE Compression module registered
  180. [ 3.645410] NET: Registered protocol family 24
  181. [ 3.649924] tun: Universal TUN/TAP device driver, 1.6
  182. [ 3.655253] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  183. [ 3.662046] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  184. [ 3.666985] usbcore: registered new interface driver pegasus
  185. [ 3.673018] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  186. [ 3.677910] usbcore: registered new interface driver rtl8150
  187. [ 3.682497] usbcore: registered new interface driver asix
  188. [ 3.687560] usbcore: registered new interface driver cdc_ether
  189. [ 3.692314] usbcore: registered new interface driver dm9601
  190. [ 3.697300] usbcore: registered new interface driver smsc75xx
  191. [ 3.702230] usbcore: registered new interface driver smsc95xx
  192. [ 3.707387] usbcore: registered new interface driver cdc_subset
  193. [ 3.713995] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  194. [ 3.716380] cdc_ncm: 04-Aug-2011
  195. [ 3.721211] usbcore: registered new interface driver cdc_ncm
  196. [ 3.727444] usbcore: registered new interface driver baseband_usb_1519_20_3
  197. [ 3.731888] cannot open usb driver - !g_usb_interface[0]
  198. [ 3.737981] usbcore: deregistering interface driver baseband_usb_1519_20_3
  199. [ 3.741039] cannot open baseband usb net
  200. [ 3.746787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  201. [ 3.750742] tegra USB phy - inst[2] platform info:
  202. [ 3.752405] port_otg: no
  203. [ 3.754174] has_hostpc: no
  204. [ 3.757537] phy_interface: USB_PHY_INTF_UTMI
  205. [ 3.760808] op_mode: TEGRA_USB_OPMODE_HOST
  206. [ 3.762489] vbus_gpio: -1
  207. [ 3.764254] vbus_reg: NULL
  208. [ 3.766286] hot_plug: enabled
  209. [ 3.768936] remote_wakeup: disabled
  210. [ 3.778150] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  211. [ 3.784978] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
  212. [ 3.820929] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  213. [ 3.840916] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  214. [ 3.844544] utmi_phy_irq: usb device plugged-in
  215. [ 3.850599] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  216. [ 3.856979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  217. [ 3.861570] usb usb1: Product: Tegra EHCI Host Controller
  218. [ 3.867312] usb usb1: Manufacturer: Linux 3.1.10-DRH-FOSS-3.1+ ehci_hcd
  219. [ 3.871103] usb usb1: SerialNumber: tegra-ehci.2
  220. [ 3.874226] hub 1-0:1.0: USB hub found
  221. [ 3.877312] hub 1-0:1.0: 1 port detected
  222. [ 3.885223] tegra-ehci tegra-ehci.2: Couldn't enable USB host mode wakeup, irq=129, error=-22
  223. [ 3.890225] usbcore: registered new interface driver cdc_acm
  224. [ 3.897401] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  225. [ 3.902300] usbcore: registered new interface driver cdc_wdm
  226. [ 3.906276] Initializing USB Mass Storage driver...
  227. [ 3.911554] usbcore: registered new interface driver usb-storage
  228. [ 3.915266] USB Mass Storage support registered.
  229. [ 3.920256] usbcore: registered new interface driver libusual
  230. [ 3.925325] usbcore: registered new interface driver usbserial
  231. [ 3.929578] USB Serial support registered for generic
  232. [ 3.935293] usbcore: registered new interface driver usbserial_generic
  233. [ 3.938810] usbserial: USB Serial Driver core
  234. [ 3.944328] USB Serial support registered for FTDI USB Serial Device
  235. [ 3.949364] usbcore: registered new interface driver ftdi_sio
  236. [ 3.954327] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  237. [ 3.959553] USB Serial support registered for GSM modem (1-port)
  238. [ 3.964349] usbcore: registered new interface driver option
  239. [ 3.968485] option: v0.7.2:USB Driver for GSM modems
  240. [ 3.972593] USB Serial support registered for pl2303
  241. [ 3.977398] usbcore: registered new interface driver pl2303
  242. [ 3.982573] pl2303: Prolific PL2303 USB to serial adaptor driver
  243. [ 3.989889] Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
  244. [ 3.993842] tegra USB phy - inst[0] platform info:
  245. [ 3.995590] port_otg: yes
  246. [ 3.997354] has_hostpc: no
  247. [ 4.000722] phy_interface: USB_PHY_INTF_UTMI
  248. [ 4.004149] op_mode: TEGRA_USB_OPMODE_DEVICE
  249. [ 4.006003] vbus_pmu_irq: 0
  250. [ 4.007689] vbus_gpio: -1
  251. [ 4.009878] charging: disabled
  252. [ 4.012437] remote_wakeup: disabled
  253. [ 4.018542] create_regulator: REG-LDO_3: Failed to create debugfs directory
  254. [ 4.031315] _regulator_get: deviceless supply usb_bat_chg not found, using dummy regulator
  255. [ 4.038438] android_usb gadget: Mass Storage Function, version: 2009/09/11
  256. [ 4.042240] android_usb gadget: Number of LUNs=1
  257. [ 4.046216] lun0: LUN: removable file: (no medium)
  258. [ 4.050246] android_usb gadget: android_usb ready
  259. [ 4.054045] tegra-udc: bind to driver android_usb
  260. [ 4.058952] mousedev: PS/2 mouse device common for all mice
  261. [ 4.061788] SO340010: so340010_kbd_init
  262. [ 4.064708] SO340010: so340010_kbd_probe
  263. [ 4.069952] input: so340010_kbd as /devices/virtual/input/input1
  264. [ 4.080025] Wake14 for irq=366
  265. [ 4.084778] usbcore: registered new interface driver xpad
  266. [ 4.170222] at168_touch: InitData[0] = 0x0---
  267. [ 4.173474] at168_touch: InitData[1] = 0x4---
  268. [ 4.176739] at168_touch: InitData[2] = 0x58---
  269. [ 4.179931] at168_touch: InitData[3] = 0x2---
  270. [ 4.183179] at168_touch: InitData[4] = 0x2---
  271. [ 4.186357] at168_touch: InitData[5] = 0x2---
  272. [ 4.189635] at168_touch: InitData[6] = 0x11---
  273. [ 4.192971] at168_touch: InitData[7] = 0x13---
  274. [ 4.199063] at168_touch: now FW xMAX is 1024 yMAx is 600 Version is 2021113.
  275. [ 4.204818] usb 1-1: new high speed USB device number 2 using tegra-ehci
  276. [ 4.210181] input: at168_touch as /devices/virtual/input/input2
  277. [ 4.212575] Wake15 for irq=271
  278. [ 4.217036] at168_touch 0-005c: at168_probe: initialized
  279. [ 4.223423] using rtc device, tps6586x-rtc, for alarms
  280. [ 4.230165] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  281. [ 4.236624] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  282. [ 4.242926] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  283. [ 4.246236] hub 1-1:1.0: USB hub found
  284. [ 4.249508] hub 1-1:1.0: 4 ports detected
  285. [ 4.252192] i2c /dev entries driver
  286. [ 4.255616] Linux media interface: v0.10
  287. [ 4.259362] Linux video capture interface: v2.00
  288. [ 4.265521] soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
  289. [ 4.270318] tegra_camera tegra_camera.0: tegra_camera_enable
  290. [ 4.275427] tegra_camera_add_device: icd=df0a0c00 sd= (null)
  291. [ 4.282439] _regulator_get: 3-003c supply vdda not found, using dummy regulator
  292. [ 4.289263] _regulator_get: 3-003c supply vdd_reg not found, using dummy regulator
  293. [ 4.295950] _regulator_get: 3-003c supply vddio not found, using dummy regulator
  294. [ 4.301084] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  295. [ 4.306546] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  296. [ 4.311231] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  297. [ 4.330955] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  298. [ 4.336345] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  299. [ 4.341098] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  300. [ 4.360955] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  301. [ 4.366347] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  302. [ 4.371100] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  303. [ 4.376361] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  304. [ 4.381824] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  305. [ 4.386507] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  306. [ 4.391774] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  307. [ 4.397166] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  308. [ 4.401918] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  309. [ 4.405333] S5K4CDGX 3-003c: ChipId: 0x7028
  310. [ 4.410482] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  311. [ 4.415872] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  312. [ 4.420624] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  313. [ 4.425827] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  314. [ 4.431290] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  315. [ 4.435974] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  316. [ 4.440006] S5K4CDGX 3-003c: ChipId 0x0000: 0x7028
  317. [ 4.445085] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  318. [ 4.450546] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  319. [ 4.455227] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  320. [ 4.460446] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  321. [ 4.465837] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  322. [ 4.470589] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  323. [ 4.475813] tegra-i2c tegra-i2c.2: I2c error status 0x00000008
  324. [ 4.481274] tegra-i2c tegra-i2c.2: no acknowledge from address 0x3c
  325. [ 4.485956] tegra-i2c tegra-i2c.2: Packet status 0x00010009
  326. [ 4.489988] S5K4CDGX 3-003c: ChipId 0x0000: 0x7028
  327. [ 4.635704] S5K4CDGX 3-003c: FW API ver.: 0xB5F0, FW rev.: 0xB089
  328. [ 4.641104] tegra-camera tegra-camera.0: Not supporting RGB565X
  329. [ 4.648891] tegra-camera tegra-camera.0: Providing format YUV422 (UYVY) packed using code 8198
  330. [ 4.656754] tegra-camera tegra-camera.0: Providing format YUV422 (VYUY) packed using code 8198
  331. [ 4.664613] tegra-camera tegra-camera.0: Providing format YUV422 (YUYV) packed using code 8198
  332. [ 4.672458] tegra-camera tegra-camera.0: Providing format YUV422 (YVYU) packed using code 8198
  333. [ 4.680360] tegra-camera tegra-camera.0: Providing format YUV420 (YU12) planar using code 8198
  334. [ 4.688216] tegra-camera tegra-camera.0: Providing format YVU420 (YV12) planar using code 8198
  335. [ 4.696074] tegra-camera tegra-camera.0: Providing format YUV422 (UYVY) packed using code 8200
  336. [ 4.703933] tegra-camera tegra-camera.0: Providing format YUV422 (VYUY) packed using code 8200
  337. [ 4.711709] tegra-camera tegra-camera.0: Providing format YUV422 (YUYV) packed using code 8200
  338. [ 4.719566] tegra-camera tegra-camera.0: Providing format YUV422 (YVYU) packed using code 8200
  339. [ 4.727423] tegra-camera tegra-camera.0: Providing format YUV420 (YU12) planar using code 8200
  340. [ 4.735281] tegra-camera tegra-camera.0: Providing format YVU420 (YV12) planar using code 8200
  341. [ 4.740320] tegra-camera tegra-camera.0: Not supporting RGB565X
  342. [ 4.745367] tegra_camera tegra_camera.0: tegra_camera_disable
  343. [ 4.750926] tegra-camera tegra-camera.0: Tegra camera driver loaded.
  344. [ 4.755905] usbcore: registered new interface driver uvcvideo
  345. [ 4.759171] USB Video Class driver (1.1.1)
  346. [ 4.763402] trpc_sema_init: registered misc dev 10:50
  347. [ 4.768149] trpc_node_register: Adding 'local' to node list
  348. [ 4.775090] tegra_avp_probe: allocated carveout memory at 38100000 for AVP kernel
  349. [ 4.780366] trpc_node_register: Adding 'avp-remote' to node list
  350. [ 4.785204] tegra_avp_probe: message area 1f0aa000/1f0aa110
  351. [ 4.789703] Driver for 1-wire Dallas network protocol.
  352. [ 4.808407] smba-battery 0-000b: driver registered
  353. [ 4.814225] i2c-core: driver [smba-battery] using legacy suspend method
  354. [ 4.820006] i2c-core: driver [smba-battery] using legacy resume method
  355. [ 4.827844] _regulator_get: deviceless supply vdd_vcore_temp not found, using dummy regulator
  356. [ 4.841789] i2c-core: driver [adt7461] using legacy suspend method
  357. [ 4.847121] i2c-core: driver [adt7461] using legacy resume method
  358. [ 4.851158] device-mapper: uevent: version 1.0.3
  359. [ 4.859010] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
  360. [ 4.862688] Bluetooth: HCI UART driver ver 2.2
  361. [ 4.866624] Bluetooth: HCI H4 protocol initialized
  362. [ 4.870564] Bluetooth: HCILL protocol initialized
  363. [ 4.874742] Bluetooth: BlueSleep Mode Driver Ver 1.1
  364. [ 4.876833] Wake7 for irq=358
  365. [ 4.880569] cpuidle: using governor ladder
  366. [ 4.883758] cpuidle: using governor menu
  367. [ 4.889085] sdhci: Secure Digital Host Controller Interface driver
  368. [ 4.892616] sdhci: Copyright(c) Pierre Ossman
  369. [ 4.897386] sdhci-pltfm: SDHCI platform and OF driver helper
  370. [ 4.902689] mmc0: Invalid maximum block size, assuming 512 bytes
  371. [ 4.906428] Registered led device: mmc0::
  372. [ 4.913005] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  373. [ 4.918192] mmc1: Invalid maximum block size, assuming 512 bytes
  374. [ 4.921493] Registered led device: mmc1::
  375. [ 4.927956] mmc1: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  376. [ 4.931294] Wake23 for irq=261
  377. [ 4.933457] Wake23 for irq=261
  378. [ 4.935310] Enabling wake23
  379. [ 4.939284] gpio bank wake found: wake23 for irq=66
  380. [ 4.941208] Enabling wake23
  381. [ 4.948261] mmc2: Invalid maximum block size, assuming 512 bytes
  382. [ 4.951592] Registered led device: mmc2::
  383. [ 4.958080] mmc2: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  384. [ 4.962171] Registered led device: cpu
  385. [ 4.967541] Registered led device: cpu-busy
  386. [ 4.971545] tegra-aes tegra-aes: registered
  387. [ 4.978090] usbcore: registered new interface driver usbhid
  388. [ 4.981151] usbhid: USB HID core driver
  389. [ 4.985117] logger: created 256K log 'log_main'
  390. [ 4.988983] logger: created 256K log 'log_events'
  391. [ 4.992780] logger: created 256K log 'log_radio'
  392. [ 4.996710] logger: created 256K log 'log_system'
  393. [ 5.000421] ISL29023: isl29023_probe
  394. [ 5.003320] ISL29023: isl29023_chip_init
  395. [ 5.011008] _regulator_get: deviceless supply vdd_vcore_phtn not found, using dummy regulator
  396. [ 5.020862] ISL29023: isl29023_chip_init successfully
  397. [ 5.025708] ISL29023: isl29023_probed successfully
  398. [ 5.035919] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  399. [ 5.087243] Wake12 for irq=370
  400. [ 5.222918] mmc1: host does not support reading read-only switch. assuming write-enable.
  401. [ 5.231133] mmc1: new high speed SDHC card at address d499
  402. [ 5.235110] mmcblk0: mmc1:d499 SE08G 7.40 GiB
  403. [ 5.239024] mmcblk0: p1 p2
  404. [ 5.602624] asoc: alc5623-hifi <-> tegra20-i2s.0 mapping ok
  405. [ 5.607494] asoc: dit-hifi <-> tegra20-i2s.1 mapping ok
  406. [ 5.612257] asoc: dit-hifi <-> tegra20-spdif mapping ok
  407. [ 5.621914] input: tegra-alc5623 Headphone Jack as /devices/platform/tegra-snd-alc5623.0/sound/card0/input3
  408. [ 5.628016] tegra-snd-alc5623 tegra-snd-alc5623.0: sound card registered
  409. [ 5.630135] ALSA device list:
  410. [ 5.632440] #0: tegra-alc5623
  411. [ 5.635094] GACT probability NOT on
  412. [ 5.637870] Mirror/redirect action on
  413. [ 5.639682] u32 classifier
  414. [ 5.642251] Actions configured
  415. [ 5.646075] Netfilter messages via NETLINK v0.30.
  416. [ 5.651383] nf_conntrack version 0.5.0 (13591 buckets, 54364 max)
  417. [ 5.657943] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  418. [ 5.663023] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  419. [ 5.666705] xt_time: kernel timezone is -0000
  420. [ 5.671447] ip_tables: (C) 2000-2006 Netfilter Core Team
  421. [ 5.678789] mmc2: host does not support reading read-only switch. assuming write-enable.
  422. [ 5.682742] arp_tables: (C) 2002 David S. Miller
  423. [ 5.685080] TCP cubic registered
  424. [ 5.688723] NET: Registered protocol family 10
  425. [ 5.691032] Mobile IPv6
  426. [ 5.695583] ip6_tables: (C) 2000-2006 Netfilter Core Team
  427. [ 5.700242] mmc2: new high speed SDHC card at address b368
  428. [ 5.703429] IPv6 over IPv4 tunneling driver
  429. [ 5.707587] mmcblk1: mmc2:b368 50272 15.4 GiB
  430. [ 5.711040] NET: Registered protocol family 17
  431. [ 5.714538] NET: Registered protocol family 15
  432. [ 5.718517] Bluetooth: RFCOMM TTY layer initialized
  433. [ 5.722898] Bluetooth: RFCOMM socket layer initialized
  434. [ 5.724408] mmcblk1: p1
  435. [ 5.727389] Bluetooth: RFCOMM ver 1.11
  436. [ 5.731819] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  437. [ 5.736856] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  438. [ 5.743130] rfkill_gpio rfkill_gpio: bluetooth_rfkill device registered.
  439. [ 5.746978] Registering the dns_resolver key type
  440. [ 5.749041] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  441. [ 5.757418] ThumbEE CPU extension supported.
  442. [ 5.761332] Registering SWP/SWPB emulation handler
  443. [ 5.771851] Disabling clocks left on by bootloader:
  444. [ 5.773166] audio
  445. [ 5.774663] stat_mon
  446. [ 5.776341] dsi2-fixed
  447. [ 5.778037] dsi1-fixed
  448. [ 5.779717] fuse_burn
  449. [ 5.780956] blink
  450. [ 5.782190] clk_d
  451. [ 5.783868] pll_p_out2
  452. [ 5.786036] CPU rate: 1000 MHz
  453. [ 5.792606] tegra_dvfs: vdd_cpu: stats above 1237 mV will be squashed
  454. [ 5.798802] tegra_dvfs: vdd_core: stats above 1437 mV will be squashed
  455. [ 5.804983] tegra_dvfs: vdd_aon: stats above 1437 mV will be squashed
  456. [ 5.815111] ## wifi_probe
  457. [ 5.817038] wifi_set_power = 1
  458. [ 5.819531] smba1006_wifi_power: 1
  459. [ 6.122133] wifi_set_carddetect = 1
  460. [ 6.132249]
  461. [ 6.132252] Dongle Host Driver, version 5.90.195.114
  462. [ 6.132257] Compiled in drivers/net/wireless/bcmdhd on Mar 6 2013 at 12:54:55
  463. [ 6.169446] mmc0: new high speed SDIO card at address 0001
  464. [ 6.174100] F1 signature read @0x18000000=0x9934329
  465. [ 6.181501] DHD: dongle ram size is set to 294912(orig 294912)
  466. [ 6.185783] wl_create_event_handler thr:5b started
  467. [ 6.188417] dhd_attach thr:5c started
  468. [ 6.190958] dhd_attach thr:5d started
  469. [ 6.193496] dhd_attach thr:5e started
  470. [ 6.201491] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  471. [ 6.203383] wifi_set_power = 0
  472. [ 6.205925] smba1006_wifi_power: 0
  473. [ 6.221559] bcmsdh_sdmmc: probe of mmc0:0001:3 failed with error -110
  474. [ 6.515756] =========== WLAN placed in RESET ========
  475. [ 6.518129] Wake24 for irq=362
  476. [ 6.524348] input: gpio-keys as /devices/platform/gpio-keys.0/input/input4
  477. [ 6.531054] smba_wake.c: Connected device: input4 (gpio-keys at gpio-keys/input0)
  478. [ 6.540626] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-03-07 19:22:22 UTC (1362684142)
  479. [ 6.545163] Warning: unable to open an initial console.
  480. [ 6.548194] Freeing init memory: 316K
  481. [ 6.559311] init: /init.harmony.rc: 190: ignored duplicate definition of service 'iprenew_eth0'
  482. [ 6.567916] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  483. [ 6.711518] yaffs: dev is 32505859 name is "mtdblock3" rw
  484. [ 6.713999] yaffs: passed flags ""
  485. [ 6.718681] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
  486. [ 6.828302] yaffs: yaffs_read_super: is_checkpointed 0
  487. [ 6.923633] yaffs: dev is 32505860 name is "mtdblock4" rw
  488. [ 6.926183] yaffs: passed flags ""
  489. [ 6.930883] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
  490. [ 6.951901] yaffs: yaffs_read_super: is_checkpointed 1
  491. [ 6.974368] zcache: created ephemeral tmem pool, id=0, client=65535
  492. [ 6.981771] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  493. [ 11.037643] fs_mgr: Cannot mount filesystem on mtd@system at /system
  494. [ 11.041835] init: fs_mgr_mount_all returned an error
  495. [ 11.278248] init: service 'console' requires console
  496. [ 11.311225] android_usb: already disabled
  497. [ 11.314768] android_usb: already disabled
  498. [ 11.317214] mtp_bind_config
  499. [ 11.319532] adb_bind_config
  500. [ 11.327887] adb_open(adbd)
  501. [ 11.824741] warning: `rild' uses 32-bit capabilities (legacy support in use)
  502. [ 54.078465] request_suspend_state: wakeup (3->0) at 54044388002 (2013-03-07 19:23:10.031098001 UTC)
  503. [ 55.652095]
  504. [ 55.652103] Dongle Host Driver, version 5.90.195.114
  505. [ 55.652109] Compiled in drivers/net/wireless/bcmdhd on Mar 6 2013 at 12:54:55
  506. [ 55.654864] wl_android_wifi_on in
  507. [ 55.656940] wifi_set_power = 1
  508. [ 55.659480] smba1006_wifi_power: 1
  509. [ 55.870422] acc_open
  510. [ 55.871938] acc_release
  511. [ 55.967364] =========== WLAN going back to live ========
  512. [ 55.969270] sdio_reset_comm():
  513. [ 56.058985] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  514. [ 58.139132] dhd_bus_rxctl: resumed on timeout
  515. [ 58.143459] dhd_bus_rxctl: rxcnt_timeout=1
  516. [ 58.148398] dhd_bus_devreset: dhd_bus_start fail with -5
  517. [ 58.151977] dhd_dev_reset: dhd_bus_devreset: -5
  518. [ 58.154831] wl_android_wifi_off in
  519. [ 60.151103] dhd_bus_txctl: ctrl_frame_stat == TRUE txcnt_timeout=1
  520. [ 60.155916] dhdcdc_set_ioctl: dhdcdc_msg failed w/status -5
  521. [ 60.161879] wifi_set_power = 0
  522. [ 60.164449] smba1006_wifi_power: 0
  523. [ 60.531304] =========== WLAN placed in RESET ========
  524. [ 61.541115] I/O Error on wifi, power down and try again. Attempt 1/5
  525. [ 61.543353] wl_android_wifi_on in
  526. [ 61.545209] wifi_set_power = 1
  527. [ 61.547743] smba1006_wifi_power: 1
  528. [ 61.874755] =========== WLAN going back to live ========
  529. [ 61.876663] sdio_reset_comm():
  530. [ 61.903721] F1 signature read @0x18000000=0x9934329
  531. [ 61.920818] DHD: dongle ram size is set to 294912(orig 294912)
  532. [ 61.996634] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  533. [ 62.094293] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=e0:2a:82:0d:80:be
  534. [ 62.120812] Firmware version = wl0: May 25 2012 17:57:45 version 4.218.248.44
  535. [ 62.141054] CFGP2P-ERROR) wl_cfgp2p_supported : wl p2p error -23
  536. [ 63.322340] wl_bss_connect_done succeeded with 00:24:b2:06:b8:f8
  537. [ 63.334505] wl_bss_connect_done succeeded with 00:24:b2:06:b8:f8
  538. [ 63.933937] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
  539. [ 64.005841] qtaguid: iface_stat: stat_update() wlan0 not found
  540. [ 64.656250] zcache: created ephemeral tmem pool, id=1, client=65535
  541. [ 64.664032] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  542. [ 67.728601] tegra_uart tegra_uart.2: Setting clk_src pll_p
  543. [ 67.733476] tegra_uart tegra_uart.2: Setting clk_src clk_m
  544. [ 67.740300] tegra_uart tegra_uart.2: Setting clk_src pll_p
  545. [ 67.772426] tegra_uart tegra_uart.2: Setting clk_src pll_c
  546. [ 68.109056] tegra_uart tegra_uart.2: Setting clk_src pll_p
  547. [ 68.217343] tegra_uart tegra_uart.2: Setting clk_src pll_c
  548. [ 75.429078] wlan0: no IPv6 routers present
  549. [ 87.961325] SO340010: gpio_val=0x0000, button_val = 0x0000
  550. [ 87.971358] SO340010: gpio_val=0xdf810000, button_val = 0xdf070000
  551. [ 88.060459] SO340010: gpio_val=0x0000, button_val = 0x0000
  552. [ 96.556742] SO340010: gpio_val=0x0000, button_val = 0x6cb70000
  553. [ 97.615320] SO340010: gpio_val=0x0000, button_val = 0x7b440000
  554. [ 106.188476] request_suspend_state: sleep (0->3) at 106154369001 (2013-03-07 19:24:02.141077000 UTC)
  555. [ 106.193004] SO340010: so340010_kbd_early_suspend() IN
  556. [ 106.198114] SO340010: so340010_kbd_early_suspend() OUT
  557. [ 106.453760] dhd_set_suspend: force extra Suspend setting
  558. [ 106.481113] dhd_get_dtim_skip beacom=100 msec bcn_li_dtim=1 DTIM=3 Listen=10
  559. [ 109.498906] request_suspend_state: wakeup (3->0) at 109464668001 (2013-03-07 19:24:05.451374000 UTC)
  560. [ 109.602713] dhd_set_suspend: Remove extra suspend setting
  561. [ 137.963925] SysRq : Emergency Remount R/O
  562. [ 138.218963] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  563. [ 138.284734] Restarting system.
  564.  
  565. No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!