API tools faq
paste
Advertisement
Guest User

linux-nfs-dhcp-error

a guest
Oct 24th, 2017
749
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.59 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2013.10 (Nov 28 2013 - 06:36:11)
  2.  
  3. I2C: ready
  4. DRAM: 512 MiB
  5. WARNING: Caches not enabled
  6. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  7. Net: cpsw, usb_ether
  8. Hit any key to stop autoboot: 0
  9. U-Boot#
  10. U-Boot#
  11. U-Boot#
  12. U-Boot# run nfs_bootcmd
  13. link up on port 0, speed 100, full duplex
  14. Using cpsw device
  15. TFTP from server 192.168.0.1; our IP address is 192.168.0.100
  16. Filename 'zImage'.
  17. Load address: 0x81000000
  18. Loading: #################################################################
  19. #################################################################
  20. #################################################################
  21. #################################################################
  22. ######
  23. 1.3 MiB/s
  24. done
  25. Bytes transferred = 3890984 (3b5f28 hex)
  26. link up on port 0, speed 100, full duplex
  27. Using cpsw device
  28. TFTP from server 192.168.0.1; our IP address is 192.168.0.100
  29. Filename 'am335x-boneblack.dtb'.
  30. Load address: 0x82000000
  31. Loading: ###
  32. 981.4 KiB/s
  33. done
  34. Bytes transferred = 34184 (8588 hex)
  35. Kernel image @ 0x81000000 [ 0x000000 - 0x3b5f28 ]
  36. ## Flattened Device Tree blob at 82000000
  37. Booting using the fdt blob at 0x82000000
  38. Using Device Tree in place at 82000000, end 8200b587
  39.  
  40. Starting kernel ...
  41.  
  42. [ 0.000000] Booting Linux on physical CPU 0x0
  43. [ 0.000000] Linux version 4.9.57 (bobby@bobby-EX58-UD5) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Sun Oct 22 08:31:36 PDT 2017
  44. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  45. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  46. [ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
  47. [ 0.000000] cma: Reserved 16 MiB at 0x9e800000
  48. [ 0.000000] Memory policy: Data cache writeback
  49. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  50. [ 0.000000] AM335X ES2.1 (sgx neon)
  51. [ 0.000000] percpu: Embedded 15 pages/cpu @df940000 s31784 r8192 d21464 u61440
  52. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129412
  53. [ 0.000000] Kernel command line: root=/dev/nfs rw ip={ip} console=ttyO0 nfsroot=${nfsroot} nfsrootdebug
  54. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  55. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  56. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  57. [ 0.000000] Memory: 480380K/522240K available (7168K kernel code, 778K rwdata, 2384K rodata, 1024K init, 8124K bss, 25476K reserved, 16384K cma-reserved, 0K highmem)
  58. [ 0.000000] Virtual kernel memory layout:
  59. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  60. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  61. [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  62. [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
  63. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  64. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  65. [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
  66. [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
  67. [ 0.000000] .data : 0xc0c00000 - 0xc0cc2954 ( 779 kB)
  68. [ 0.000000] .bss : 0xc0cc4000 - 0xc14b33f0 (8125 kB)
  69. [ 0.000000] Running RCU self tests
  70. [ 0.000000] Hierarchical RCU implementation.
  71. [ 0.000000] RCU lockdep checking is enabled.
  72. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  73. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  74. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  75. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  76. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  77. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  78. [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  79. [ 0.000039] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  80. [ 0.000086] OMAP clocksource: timer1 at 24000000 Hz
  81. [ 0.000562] clocksource_probe: no matching clocksources found
  82. [ 0.001487] Console: colour dummy device 80x30
  83. [ 0.001548] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  84. [ 0.001558] ... MAX_LOCKDEP_SUBCLASSES: 8
  85. [ 0.001566] ... MAX_LOCK_DEPTH: 48
  86. [ 0.001574] ... MAX_LOCKDEP_KEYS: 8191
  87. [ 0.001582] ... CLASSHASH_SIZE: 4096
  88. [ 0.001590] ... MAX_LOCKDEP_ENTRIES: 32768
  89. [ 0.001598] ... MAX_LOCKDEP_CHAINS: 65536
  90. [ 0.001605] ... CHAINHASH_SIZE: 32768
  91. [ 0.001613] memory used by lock dependency info: 5167 kB
  92. [ 0.001621] per task-struct memory footprint: 1536 bytes
  93. [ 0.001657] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
  94. [ 0.078746] pid_max: default: 32768 minimum: 301
  95. [ 0.079233] Security Framework initialized
  96. [ 0.079380] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  97. [ 0.079393] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  98. [ 0.083022] CPU: Testing write buffer coherency: ok
  99. [ 0.084580] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  100. [ 0.084654] Setting up static identity map for 0x80100000 - 0x80100070
  101. [ 0.089181] Brought up 1 CPUs
  102. [ 0.089208] SMP: Total of 1 processors activated (996.14 BogoMIPS).
  103. [ 0.089218] CPU: All CPU(s) started in SVC mode.
  104. [ 0.093177] devtmpfs: initialized
  105. [ 0.130732] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  106. [ 0.131623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  107. [ 0.131688] futex hash table entries: 256 (order: 2, 16384 bytes)
  108. [ 0.133332] pinctrl core: initialized pinctrl subsystem
  109. [ 0.138239] NET: Registered protocol family 16
  110. [ 0.144259] DMA: preallocated 256 KiB pool for atomic coherent allocations
  111. [ 0.190493] omap_hwmod: debugss: _wait_target_disable failed
  112. [ 0.246545] cpuidle: using governor menu
  113. [ 0.264340] OMAP GPIO hardware version 0.1
  114. [ 0.305242] No ATAGs?
  115. [ 0.305271] hw-breakpoint: debug architecture 0x4 unsupported.
  116. [ 0.305503] omap4_sram_init:Unable to allocate sram needed to handle errata I688
  117. [ 0.305517] omap4_sram_init:Unable to get sram pool needed to handle errata I688
  118. [ 0.351579] edma 49000000.edma: TI EDMA DMA engine driver
  119. [ 0.356072] SCSI subsystem initialized
  120. [ 0.357829] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
  121. [ 0.357945] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
  122. [ 0.358221] pps_core: LinuxPPS API ver. 1 registered
  123. [ 0.358234] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  124. [ 0.358284] PTP clock support registered
  125. [ 0.362841] clocksource: Switched to clocksource timer1
  126. [ 0.464683] VFS: Disk quotas dquot_6.6.0
  127. [ 0.464890] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  128. [ 0.495757] NET: Registered protocol family 2
  129. [ 0.497751] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  130. [ 0.497852] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
  131. [ 0.499023] TCP: Hash tables configured (established 4096 bind 4096)
  132. [ 0.499208] UDP hash table entries: 256 (order: 2, 20480 bytes)
  133. [ 0.499381] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  134. [ 0.500230] NET: Registered protocol family 1
  135. [ 0.502313] RPC: Registered named UNIX socket transport module.
  136. [ 0.502342] RPC: Registered udp transport module.
  137. [ 0.502352] RPC: Registered tcp transport module.
  138. [ 0.502362] RPC: Registered tcp NFSv4.1 backchannel transport module.
  139. [ 0.505224] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  140. [ 0.509513] audit: initializing netlink subsys (disabled)
  141. [ 0.509743] audit: type=2000 audit(0.500:1): initialized
  142. [ 0.514145] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  143. [ 0.517109] NFS: Registering the id_resolver key type
  144. [ 0.517473] Key type id_resolver registered
  145. [ 0.517487] Key type id_legacy registered
  146. [ 0.517638] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  147. [ 0.523167] io scheduler noop registered
  148. [ 0.523197] io scheduler deadline registered
  149. [ 0.523318] io scheduler cfq registered (default)
  150. [ 0.525428] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  151. [ 0.529868] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  152. [ 0.536211] omap_uart 44e09000.serial: no wakeirq for uart0
  153. [ 0.536837] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0
  154. [ 1.231846] console [ttyO0] enabled
  155. [ 1.275517] brd: module loaded
  156. [ 1.302526] loop: module loaded
  157. [ 1.308402] mtdoops: mtd device (mtddev=name/number) must be supplied
  158. [ 1.317925] libphy: Fixed MDIO Bus: probed
  159. [ 1.392912] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  160. [ 1.399294] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  161. [ 1.409830] libphy: 4a101000.mdio: probed
  162. [ 1.414207] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  163. [ 1.425164] cpsw 4a100000.ethernet: Detected MACID = 04:a3:16:f5:1a:56
  164. [ 1.438668] mousedev: PS/2 mouse device common for all mice
  165. [ 1.444641] i2c /dev entries driver
  166. [ 1.450914] omap_hsmmc 48060000.mmc: Got CD GPIO
  167. [ 1.560927] mmc0: host does not support reading read-only switch, assuming write-enable
  168. [ 1.571486] mmc0: new high speed SDHC card at address 59b4
  169. [ 1.580508] ledtrig-cpu: registered to indicate activity on CPUs
  170. [ 1.587925] oprofile: using arm/armv7
  171. [ 1.592443] Initializing XFRM netlink socket
  172. [ 1.597424] NET: Registered protocol family 10
  173. [ 1.608651] mmcblk0: mmc0:59b4 SD 14.7 GiB
  174. [ 1.619062] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  175. [ 1.627822] NET: Registered protocol family 17
  176. [ 1.632554] NET: Registered protocol family 15
  177. [ 1.637641] Key type dns_resolver registered
  178. [ 1.642296] omap_voltage_late_init: Voltage driver support not added
  179. [ 1.649019] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize
  180. [ 1.657505] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize
  181. [ 1.666656] ThumbEE CPU extension supported.
  182. [ 1.671156] Registering SWP/SWPB emulation handler
  183. [ 1.676239] SmartReflex Class3 initialized
  184. [ 1.681775] mmcblk0: p1
  185. [ 1.746694] mmc1: new high speed MMC card at address 0001
  186. [ 1.754115] random: fast init done
  187. [ 1.759272] mmcblk1: mmc1:0001 S10004 3.56 GiB
  188. [ 1.766874] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
  189. [ 1.775090] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
  190. [ 1.784626] mmcblk1: p1 p2
  191. [ 1.806950] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  192. [ 1.813695] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  193. [ 1.823922] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  194. [ 1.831433] hctosys: unable to open rtc device (rtc0)
  195. [ 1.836845] sr_init: No PMIC hook to init smartreflex
  196. [ 1.842369] sr_init: platform driver register failed for SR
  197. [ 1.866001] net eth0: initializing cpsw version 1.12 (0)
  198. [ 1.973458] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
  199. [ 1.996099] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  200. [ 4.083588] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  201. [ 4.092971] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  202. [ 4.122837] Sending DHCP and RARP requests ....
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!