Advertisement
Guest User

Untitled

a guest
Dec 20th, 2019
451
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.86 KB | None | 0 0
  1. qemu-system-arm -M versatilepb -kernel zImage5verst -serial stdio -append "root=/dev/ram rdinit=/sbin/init" -dtb versatile-pb.dtb -initrd rootfs-ver.img.gz -m 256
  2. vpb_sic_write: Bad register offset 0x2c
  3. Booting Linux on physical CPU 0x0
  4. Linux version 5.4.5 (user@debian) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 Fri Dec 20 15:37:02 EST 2019
  5. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
  6. CPU: VIVT data cache, VIVT instruction cache
  7. OF: fdt: Machine model: ARM Versatile PB
  8. Memory policy: Data cache writeback
  9. Built 1 zonelists, mobility grouping on. Total pages: 65024
  10. Kernel command line: root=/dev/sda rdinit=/sbin/init
  11. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  12. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  13. mem auto-init: stack:off, heap alloc:off, heap free:off
  14. Memory: 218696K/262144K available (4081K kernel code, 144K rwdata, 1072K rodata, 176K init, 128K bss, 43448K reserved, 0K cma-reserved)
  15. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  16. VIC @(ptrval): id 0x00041190, vendor 0x41
  17. FPGA IRQ chip 0 "intc" @ (ptrval), 20 irqs, parent IRQ: 47
  18. random: get_random_bytes called from start_kernel+0x250/0x438 with crng_init=0
  19. clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  20. sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  21. Failed to initialize '/amba/timer@101e3000': -22
  22. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  23. Console: colour dummy device 80x30
  24. printk: console [tty0] enabled
  25. Calibrating delay loop... 829.84 BogoMIPS (lpj=4149248)
  26. pid_max: default: 32768 minimum: 301
  27. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  28. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  29. CPU: Testing write buffer coherency: ok
  30. Setting up static identity map for 0x8400 - 0x8458
  31. VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
  32. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  33. futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  34. NET: Registered protocol family 16
  35. DMA: preallocated 256 KiB pool for atomic coherent allocations
  36. OF: amba_device_add() failed (-19) for /amba/smc@10100000
  37. OF: amba_device_add() failed (-19) for /amba/mpmc@10110000
  38. OF: amba_device_add() failed (-19) for /amba/sctl@101e0000
  39. OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000
  40. OF: amba_device_add() failed (-19) for /amba/sci@101f0000
  41. OF: amba_device_add() failed (-19) for /amba/spi@101f4000
  42. OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000
  43. Serial: AMBA PL011 UART driver
  44. 101f1000.uart: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
  45. printk: console [ttyAMA0] enabled
  46. 101f2000.uart: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
  47. 101f3000.uart: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
  48. uart-pl011 10009000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
  49. 10009000.uart: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
  50. clocksource: Switched to clocksource arm,sp804
  51. NET: Registered protocol family 2
  52. tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  53. TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
  54. TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
  55. TCP: Hash tables configured (established 2048 bind 2048)
  56. UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  57. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  58. NET: Registered protocol family 1
  59. RPC: Registered named UNIX socket transport module.
  60. RPC: Registered udp transport module.
  61. RPC: Registered tcp transport module.
  62. RPC: Registered tcp NFSv4.1 backchannel transport module.
  63. Trying to unpack rootfs image as initramfs...
  64. random: fast init done
  65. Freeing initrd memory: 35336K
  66. NetWinder Floating Point Emulator V0.97 (double precision)
  67. workingset: timestamp_bits=30 max_order=16 bucket_order=0
  68. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  69. jffs2: version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
  70. romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
  71. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  72. io scheduler mq-deadline registered
  73. io scheduler kyber registered
  74. pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
  75. pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
  76. pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
  77. pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
  78. versatile-tft-panel 10000000.sysreg:display@0: no panel detected
  79. drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
  80. drm-clcd-pl111 10120000.display: found bridge on endpoint 1
  81. drm-clcd-pl111 10120000.display: Using non-panel bridge
  82. [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  83. [drm] No driver support for vblank timestamp query.
  84. [drm] Initialized pl111 1.0.0 20170317 for 10120000.display on minor 0
  85. drm-clcd-pl111 10120000.display: enable Versatile CLCD connectors
  86. Console: switching to colour frame buffer device 100x75
  87. drm-clcd-pl111 10120000.display: fb0: pl111drmfb frame buffer device
  88. brd: module loaded
  89. physmap-flash 34000000.flash: versatile/realview flash protection
  90. physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
  91. 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
  92. Intel/Sharp Extended Query Table at 0x0031
  93. Using buffer write method
  94. smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>
  95. smc91x 10010000.net eth0: SMC91C11xFD (rev 1) at (ptrval) IRQ 41
  96. smc91x 10010000.net eth0: Ethernet addr: 52:54:00:12:34:56
  97. rtc-ds1307 0-0068: registered as rtc0
  98. versatile reboot driver registered
  99. mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
  100. mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
  101. leds-syscon 10000000.core-module:led@08.0: registered LED versatile:0
  102. leds-syscon 10000000.core-module:led@08.1: registered LED versatile:1
  103. leds-syscon 10000000.core-module:led@08.2: registered LED versatile:2
  104. leds-syscon 10000000.core-module:led@08.3: registered LED versatile:3
  105. leds-syscon 10000000.core-module:led@08.4: registered LED versatile:4
  106. leds-syscon 10000000.core-module:led@08.5: registered LED versatile:5
  107. leds-syscon 10000000.core-module:led@08.6: registered LED versatile:6
  108. leds-syscon 10000000.core-module:led@08.7: registered LED versatile:7
  109. ledtrig-cpu: registered to indicate activity on CPUs
  110. NET: Registered protocol family 17
  111. input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
  112. rtc-ds1307 0-0068: setting system clock to 2019-12-20T21:28:07 UTC (1576877287)
  113. Freeing unused kernel memory: 176K
  114. This architecture does not have kernel memory protection.
  115. Run /sbin/init as init process
  116. Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
  117. CPU: 0 PID: 1 Comm: init Not tainted 5.4.5 #1
  118. Hardware name: ARM-Versatile (Device Tree Support)
  119. [<c001c4e8>] (unwind_backtrace) from [<c0018f98>] (show_stack+0x10/0x14)
  120. [<c0018f98>] (show_stack) from [<c0024468>] (panic+0xe8/0x2e4)
  121. [<c0024468>] (panic) from [<c0025ef8>] (do_exit+0x9d0/0xa14)
  122. [<c0025ef8>] (do_exit) from [<c0026ad4>] (do_group_exit+0x3c/0xb4)
  123. [<c0026ad4>] (do_group_exit) from [<c0031378>] (get_signal+0x124/0x790)
  124. [<c0031378>] (get_signal) from [<c00188dc>] (do_work_pending+0x108/0x560)
  125. [<c00188dc>] (do_work_pending) from [<c0009068>] (slow_work_pending+0xc/0x20)
  126. Exception stack(0xcf823fb0 to 0xcf823ff8)
  127. 3fa0: bee70f10 00000000 00000000 00000000
  128. 3fc0: 00000938 00000000 00000000 00000000 00000000 00000000 00027524 00000000
  129. 3fe0: 00000000 bee70f10 b6f3e96f b6f3bcb0 00000010 bee70f10
  130. ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement