(This GCode script was designed to adjust the Z height of a CNC machine according)
(to the minute variations in the surface height in order to achieve a better result in the milling/etching process)
(This script is the output of AutoLevellerAE, 0.9.5u2 Changeset: ...2d0387 @ http://autoleveller.co.uk)
(Author: James Hawthorne PhD. File creation date: 02-10-2024 21:28)
(This program and any of its output is licensed under GPLv2 and as such...)
(AutoLevellerAE comes with ABSOLUTELY NO WARRANTY; for details, see sections 11 and 12 of the GPLv2 @ http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)

(The following is a checklist which can be used before the probe routine starts)
(The checklist may not be entirely correct given your machine, therefore you should make your own adaptations as appropriate)
(1. Make sure wires/clips are attached and the probe is working correctly)
(Test probe connections within control software before starting)
(2. Home all axis)
(3. Load GCode file that contains the probe routine into your software controller)
(4. Jog tool tip close to surface and touch off Z)
(5. Jog Z up a fraction to make sure surface is cleared)
(6. Jog to and touch off X and Y at the desired bottom left corner of the probe area)
(Note: The first probe will touch off Z to 0.0 when it first touches to the surface,)
(all other probe values are relative to this first point)

G90 G21 S20000 G17

M0 (Attach probe wires and clips that need attaching)
(Initialize probe routine)
G0 Z5 (Move clear of the board first)
G1 X5 Y33 F900 (Move to bottom left corner)
G0 Z10 (Quick move to probe clearance height)
G4 P1
G31 Z-20 F300 (Probe to a maximum of the specified probe height at the specified feed rate)
m2002
G92 Z0 (Touch off Z to 0 once contact is made)
G0 Z10 (Move Z to above the contact point)
G4 P1
G31 Z-20 F150 (Repeat at a more accurate slower rate)
m2002
G92 Z0
G0 Z10

G0 Z10
G1 X5 Y33 F900
G4 P1
G31 Z-20 F300
m2002
#500=#2002
G0 Z10
G1 X18.75 Y33 F900
G4 P1
G31 Z-20 F300
m2002
#501=#2002
G0 Z10
G1 X32.5 Y33 F900
G4 P1
G31 Z-20 F300
m2002
#502=#2002
G0 Z10
G1 X46.25 Y33 F900
G4 P1
G31 Z-20 F300
m2002
#503=#2002
G0 Z10
G1 X60 Y33 F900
G4 P1
G31 Z-20 F300
m2002
#504=#2002
G0 Z10
G1 X60 Y48 F900
G4 P1
G31 Z-20 F300
m2002
#509=#2002
G0 Z10
G1 X46.25 Y48 F900
G4 P1
G31 Z-20 F300
m2002
#508=#2002
G0 Z10
G1 X32.5 Y48 F900
G4 P1
G31 Z-20 F300
m2002
#507=#2002
G0 Z10
G1 X18.75 Y48 F900
G4 P1
G31 Z-20 F300
m2002
#506=#2002
G0 Z10
G1 X5 Y48 F900
G4 P1
G31 Z-20 F300
m2002
#505=#2002
G0 Z10
G1 X5 Y63 F900
G4 P1
G31 Z-20 F300
m2002
#510=#2002
G0 Z10
G1 X18.75 Y63 F900
G4 P1
G31 Z-20 F300
m2002
#511=#2002
G0 Z10
G1 X32.5 Y63 F900
G4 P1
G31 Z-20 F300
m2002
#512=#2002
G0 Z10
G1 X46.25 Y63 F900
G4 P1
G31 Z-20 F300
m2002
#513=#2002
G0 Z10
G1 X60 Y63 F900
G4 P1
G31 Z-20 F300
m2002
#514=#2002
G0 Z10.00000

M0 (Detach any clips used for probing)

( Corte 2 )
( File created: Wednesday October 02 2024 - 08:43 PM)
( for Mach2/3 from Vectric )
( Material Size)
( X= 65.000, Y= 65.000 ,Z= 1.500)
()
(Toolpaths used in this file:)
(Corte 2)
(Tools used in this file: )
(1 = Gravação - 15 Graus Ponta 0.8 - 3.2 mm)
N100G00G21G17G90G40G49G80
N110G71G91.1
N120T1M06
N130 (Gravação - 15 Graus Ponta 0.8 - 3.2 mm)
N140G00G43Z20.320H1
N150S9000M03
N160(Toolpath:- Corte 2)
N170()
N180G94
N190X0.000Y0.000F600.0
N200G00X12.586Y41.440Z2.000
N210G00X12.586Y41.440Z1.000
#102=[#505+0.43733*#500-0.43733*#505]
#101=[#506+0.43733*#501-0.43733*#506]
#100=[#102+0.55171*#101-0.55171*#102]
N220G1X12.586Y41.440Z[#100+-0.050]F100.0
#102=[#505+0.43733*#500-0.43733*#505]
#101=[#506+0.43733*#501-0.43733*#506]
#100=[#102+0.91535*#101-0.91535*#102]
N230G1X17.58600Y41.44000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.16495*#101-0.16495*#102]
N230G1X21.018Y41.440Z[#100+-0.050]F600.0
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.16960*#101-0.16960*#102]
N240G1X21.082Y41.461Z[#100+-0.050]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.17120*#101-0.17120*#102]
N250G1X21.104Y41.525Z[#100+-0.050]
#102=[#506+0.24980*#501-0.24980*#506]
#101=[#507+0.24980*#502-0.24980*#507]
#100=[#102+0.17120*#101-0.17120*#102]
N260G1X21.104Y44.253Z[#100+-0.050]
#102=[#506+0.24547*#501-0.24547*#506]
#101=[#507+0.24547*#502-0.24547*#507]
#100=[#102+0.16960*#101-0.16960*#102]
N270G1X21.082Y44.318Z[#100+-0.050]
#102=[#506+0.24407*#501-0.24407*#506]
#101=[#507+0.24407*#502-0.24407*#507]
#100=[#102+0.16495*#101-0.16495*#102]
N280G1X21.018Y44.339Z[#100+-0.050]
#102=[#506+0.24407*#501-0.24407*#506]
#101=[#507+0.24407*#502-0.24407*#507]
#100=[#102+0.11753*#101-0.11753*#102]
N290G1X20.366Y44.339Z[#100+-0.050]
#102=[#506+0.24520*#501-0.24520*#506]
#101=[#507+0.24520*#502-0.24520*#507]
#100=[#102+0.11287*#101-0.11287*#102]
N300G1X20.302Y44.322Z[#100+-0.050]
#102=[#506+0.24867*#501-0.24867*#506]
#101=[#507+0.24867*#502-0.24867*#507]
#100=[#102+0.11127*#101-0.11127*#102]
N310G1X20.280Y44.270Z[#100+-0.050]
#102=[#506+0.37907*#501-0.37907*#506]
#101=[#507+0.37907*#502-0.37907*#507]
#100=[#102+0.08575*#101-0.08575*#102]
N320G1X19.929Y42.314Z[#100+-0.050]
#102=[#506+0.38247*#501-0.38247*#506]
#101=[#507+0.38247*#502-0.38247*#507]
#100=[#102+0.08415*#101-0.08415*#102]
N330G1X19.907Y42.263Z[#100+-0.050]
#102=[#506+0.38360*#501-0.38360*#506]
#101=[#507+0.38360*#502-0.38360*#507]
#100=[#102+0.07949*#101-0.07949*#102]
N340G1X19.843Y42.246Z[#100+-0.050]
#102=[#505+0.38360*#500-0.38360*#505]
#101=[#506+0.38360*#501-0.38360*#506]
#100=[#102+0.78313*#101-0.78313*#102]
N350G1X15.768Y42.246Z[#100+-0.050]
#102=[#505+0.38220*#500-0.38220*#505]
#101=[#506+0.38220*#501-0.38220*#506]
#100=[#102+0.77847*#101-0.77847*#102]
N360G1X15.704Y42.267Z[#100+-0.050]
#102=[#505+0.37787*#500-0.37787*#505]
#101=[#506+0.37787*#501-0.37787*#506]
#100=[#102+0.77695*#101-0.77695*#102]
N370G1X15.683Y42.332Z[#100+-0.050]
#102=[#505+0.04453*#500-0.04453*#505]
#101=[#506+0.04453*#501-0.04453*#506]
#100=[#102+0.77695*#101-0.77695*#102]
N380G1X15.68300Y47.33200Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#510+0.71120*#505-0.71120*#510]
#101=[#511+0.71120*#506-0.71120*#511]
#100=[#102+0.77695*#101-0.77695*#102]
N380G1X15.68300Y52.33200Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#510+0.70653*#505-0.70653*#510]
#101=[#511+0.70653*#506-0.70653*#511]
#100=[#102+0.77695*#101-0.77695*#102]
N380G1X15.683Y52.402Z[#100+-0.050]
#102=[#510+0.70220*#505-0.70220*#510]
#101=[#511+0.70220*#506-0.70220*#511]
#100=[#102+0.77847*#101-0.77847*#102]
N390G1X15.704Y52.467Z[#100+-0.050]
#102=[#510+0.70080*#505-0.70080*#510]
#101=[#511+0.70080*#506-0.70080*#511]
#100=[#102+0.78313*#101-0.78313*#102]
N400G1X15.768Y52.488Z[#100+-0.050]
#102=[#510+0.69107*#505-0.69107*#510]
#101=[#511+0.69107*#506-0.69107*#511]
#100=[#102+0.89796*#101-0.89796*#102]
N410G1X17.347Y52.634Z[#100+-0.050]
#102=[#510+0.68967*#505-0.68967*#510]
#101=[#511+0.68967*#506-0.68967*#511]
#100=[#102+0.90262*#101-0.90262*#102]
N420G1X17.411Y52.655Z[#100+-0.050]
#102=[#510+0.68533*#505-0.68533*#510]
#101=[#511+0.68533*#506-0.68533*#511]
#100=[#102+0.90415*#101-0.90415*#102]
N430G1X17.432Y52.720Z[#100+-0.050]
#102=[#510+0.65507*#505-0.65507*#510]
#101=[#511+0.65507*#506-0.65507*#511]
#100=[#102+0.90415*#101-0.90415*#102]
N440G1X17.432Y53.174Z[#100+-0.050]
#102=[#510+0.65073*#505-0.65073*#510]
#101=[#511+0.65073*#506-0.65073*#511]
#100=[#102+0.90262*#101-0.90262*#102]
N450G1X17.411Y53.239Z[#100+-0.050]
#102=[#510+0.64933*#505-0.64933*#510]
#101=[#511+0.64933*#506-0.64933*#511]
#100=[#102+0.89796*#101-0.89796*#102]
N460G1X17.347Y53.260Z[#100+-0.050]
#102=[#510+0.64933*#505-0.64933*#510]
#101=[#511+0.64933*#506-0.64933*#511]
#100=[#102+0.55171*#101-0.55171*#102]
N470G1X12.586Y53.260Z[#100+-0.050]
#102=[#510+0.65073*#505-0.65073*#510]
#101=[#511+0.65073*#506-0.65073*#511]
#100=[#102+0.54698*#101-0.54698*#102]
N480G1X12.521Y53.239Z[#100+-0.050]
#102=[#510+0.65507*#505-0.65507*#510]
#101=[#511+0.65507*#506-0.65507*#511]
#100=[#102+0.54545*#101-0.54545*#102]
N490G1X12.500Y53.174Z[#100+-0.050]
#102=[#510+0.68533*#505-0.68533*#510]
#101=[#511+0.68533*#506-0.68533*#511]
#100=[#102+0.54545*#101-0.54545*#102]
N500G1X12.500Y52.720Z[#100+-0.050]
#102=[#510+0.68967*#505-0.68967*#510]
#101=[#511+0.68967*#506-0.68967*#511]
#100=[#102+0.54698*#101-0.54698*#102]
N510G1X12.521Y52.655Z[#100+-0.050]
#102=[#510+0.69107*#505-0.69107*#510]
#101=[#511+0.69107*#506-0.69107*#511]
#100=[#102+0.55171*#101-0.55171*#102]
N520G1X12.586Y52.634Z[#100+-0.050]
#102=[#510+0.70080*#505-0.70080*#510]
#101=[#511+0.70080*#506-0.70080*#511]
#100=[#102+0.65898*#101-0.65898*#102]
N530G1X14.061Y52.488Z[#100+-0.050]
#102=[#510+0.70220*#505-0.70220*#510]
#101=[#511+0.70220*#506-0.70220*#511]
#100=[#102+0.66371*#101-0.66371*#102]
N540G1X14.126Y52.467Z[#100+-0.050]
#102=[#510+0.70653*#505-0.70653*#510]
#101=[#511+0.70653*#506-0.70653*#511]
#100=[#102+0.66524*#101-0.66524*#102]
N550G1X14.147Y52.402Z[#100+-0.050]
#102=[#505+0.03987*#500-0.03987*#505]
#101=[#506+0.03987*#501-0.03987*#506]
#100=[#102+0.66524*#101-0.66524*#102]
N560G1X14.14700Y47.40200Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#505+0.37320*#500-0.37320*#505]
#101=[#506+0.37320*#501-0.37320*#506]
#100=[#102+0.66524*#101-0.66524*#102]
N560G1X14.14700Y42.40200Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#505+0.38020*#500-0.38020*#505]
#101=[#506+0.38020*#501-0.38020*#506]
#100=[#102+0.66524*#101-0.66524*#102]
N560G1X14.147Y42.297Z[#100+-0.050]
#102=[#505+0.38447*#500-0.38447*#505]
#101=[#506+0.38447*#501-0.38447*#506]
#100=[#102+0.66371*#101-0.66371*#102]
N570G1X14.126Y42.233Z[#100+-0.050]
#102=[#505+0.38587*#500-0.38587*#505]
#101=[#506+0.38587*#501-0.38587*#506]
#100=[#102+0.65898*#101-0.65898*#102]
N580G1X14.061Y42.212Z[#100+-0.050]
#102=[#505+0.39507*#500-0.39507*#505]
#101=[#506+0.39507*#501-0.39507*#506]
#100=[#102+0.55171*#101-0.55171*#102]
N590G1X12.586Y42.074Z[#100+-0.050]
#102=[#505+0.39660*#500-0.39660*#505]
#101=[#506+0.39660*#501-0.39660*#506]
#100=[#102+0.54698*#101-0.54698*#102]
N600G1X12.521Y42.051Z[#100+-0.050]
#102=[#505+0.40133*#500-0.40133*#505]
#101=[#506+0.40133*#501-0.40133*#506]
#100=[#102+0.54545*#101-0.54545*#102]
N610G1X12.500Y41.980Z[#100+-0.050]
#102=[#505+0.43167*#500-0.43167*#505]
#101=[#506+0.43167*#501-0.43167*#506]
#100=[#102+0.54545*#101-0.54545*#102]
N620G1X12.500Y41.525Z[#100+-0.050]
#102=[#505+0.43593*#500-0.43593*#505]
#101=[#506+0.43593*#501-0.43593*#506]
#100=[#102+0.54698*#101-0.54698*#102]
N630G1X12.521Y41.461Z[#100+-0.050]
#102=[#505+0.43733*#500-0.43733*#505]
#101=[#506+0.43733*#501-0.43733*#506]
#100=[#102+0.55171*#101-0.55171*#102]
N640G1X12.586Y41.440Z[#100+-0.050]
#102=[#505+0.43733*#500-0.43733*#505]
#101=[#506+0.43733*#501-0.43733*#506]
#100=[#102+0.55171*#101-0.55171*#102]
N650G1X12.586Y41.440Z[#100+-0.100]F100.0
#102=[#505+0.43733*#500-0.43733*#505]
#101=[#506+0.43733*#501-0.43733*#506]
#100=[#102+0.91535*#101-0.91535*#102]
N660G1X17.58600Y41.44000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.16495*#101-0.16495*#102]
N660G1X21.018Y41.440Z[#100+-0.100]F600.0
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.16960*#101-0.16960*#102]
N670G1X21.082Y41.461Z[#100+-0.100]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.17120*#101-0.17120*#102]
N680G1X21.104Y41.525Z[#100+-0.100]
#102=[#506+0.24980*#501-0.24980*#506]
#101=[#507+0.24980*#502-0.24980*#507]
#100=[#102+0.17120*#101-0.17120*#102]
N690G1X21.104Y44.253Z[#100+-0.100]
#102=[#506+0.24547*#501-0.24547*#506]
#101=[#507+0.24547*#502-0.24547*#507]
#100=[#102+0.16960*#101-0.16960*#102]
N700G1X21.082Y44.318Z[#100+-0.100]
#102=[#506+0.24407*#501-0.24407*#506]
#101=[#507+0.24407*#502-0.24407*#507]
#100=[#102+0.16495*#101-0.16495*#102]
N710G1X21.018Y44.339Z[#100+-0.100]
#102=[#506+0.24407*#501-0.24407*#506]
#101=[#507+0.24407*#502-0.24407*#507]
#100=[#102+0.11753*#101-0.11753*#102]
N720G1X20.366Y44.339Z[#100+-0.100]
#102=[#506+0.24520*#501-0.24520*#506]
#101=[#507+0.24520*#502-0.24520*#507]
#100=[#102+0.11287*#101-0.11287*#102]
N730G1X20.302Y44.322Z[#100+-0.100]
#102=[#506+0.24867*#501-0.24867*#506]
#101=[#507+0.24867*#502-0.24867*#507]
#100=[#102+0.11127*#101-0.11127*#102]
N740G1X20.280Y44.270Z[#100+-0.100]
#102=[#506+0.37907*#501-0.37907*#506]
#101=[#507+0.37907*#502-0.37907*#507]
#100=[#102+0.08575*#101-0.08575*#102]
N750G1X19.929Y42.314Z[#100+-0.100]
#102=[#506+0.38247*#501-0.38247*#506]
#101=[#507+0.38247*#502-0.38247*#507]
#100=[#102+0.08415*#101-0.08415*#102]
N760G1X19.907Y42.263Z[#100+-0.100]
#102=[#506+0.38360*#501-0.38360*#506]
#101=[#507+0.38360*#502-0.38360*#507]
#100=[#102+0.07949*#101-0.07949*#102]
N770G1X19.843Y42.246Z[#100+-0.100]
#102=[#505+0.38360*#500-0.38360*#505]
#101=[#506+0.38360*#501-0.38360*#506]
#100=[#102+0.78313*#101-0.78313*#102]
N780G1X15.768Y42.246Z[#100+-0.100]
#102=[#505+0.38220*#500-0.38220*#505]
#101=[#506+0.38220*#501-0.38220*#506]
#100=[#102+0.77847*#101-0.77847*#102]
N790G1X15.704Y42.267Z[#100+-0.100]
#102=[#505+0.37787*#500-0.37787*#505]
#101=[#506+0.37787*#501-0.37787*#506]
#100=[#102+0.77695*#101-0.77695*#102]
N800G1X15.683Y42.332Z[#100+-0.100]
#102=[#505+0.04453*#500-0.04453*#505]
#101=[#506+0.04453*#501-0.04453*#506]
#100=[#102+0.77695*#101-0.77695*#102]
N810G1X15.68300Y47.33200Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#510+0.71120*#505-0.71120*#510]
#101=[#511+0.71120*#506-0.71120*#511]
#100=[#102+0.77695*#101-0.77695*#102]
N810G1X15.68300Y52.33200Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#510+0.70653*#505-0.70653*#510]
#101=[#511+0.70653*#506-0.70653*#511]
#100=[#102+0.77695*#101-0.77695*#102]
N810G1X15.683Y52.402Z[#100+-0.100]
#102=[#510+0.70220*#505-0.70220*#510]
#101=[#511+0.70220*#506-0.70220*#511]
#100=[#102+0.77847*#101-0.77847*#102]
N820G1X15.704Y52.467Z[#100+-0.100]
#102=[#510+0.70080*#505-0.70080*#510]
#101=[#511+0.70080*#506-0.70080*#511]
#100=[#102+0.78313*#101-0.78313*#102]
N830G1X15.768Y52.488Z[#100+-0.100]
#102=[#510+0.69107*#505-0.69107*#510]
#101=[#511+0.69107*#506-0.69107*#511]
#100=[#102+0.89796*#101-0.89796*#102]
N840G1X17.347Y52.634Z[#100+-0.100]
#102=[#510+0.68967*#505-0.68967*#510]
#101=[#511+0.68967*#506-0.68967*#511]
#100=[#102+0.90262*#101-0.90262*#102]
N850G1X17.411Y52.655Z[#100+-0.100]
#102=[#510+0.68533*#505-0.68533*#510]
#101=[#511+0.68533*#506-0.68533*#511]
#100=[#102+0.90415*#101-0.90415*#102]
N860G1X17.432Y52.720Z[#100+-0.100]
#102=[#510+0.65507*#505-0.65507*#510]
#101=[#511+0.65507*#506-0.65507*#511]
#100=[#102+0.90415*#101-0.90415*#102]
N870G1X17.432Y53.174Z[#100+-0.100]
#102=[#510+0.65073*#505-0.65073*#510]
#101=[#511+0.65073*#506-0.65073*#511]
#100=[#102+0.90262*#101-0.90262*#102]
N880G1X17.411Y53.239Z[#100+-0.100]
#102=[#510+0.64933*#505-0.64933*#510]
#101=[#511+0.64933*#506-0.64933*#511]
#100=[#102+0.89796*#101-0.89796*#102]
N890G1X17.347Y53.260Z[#100+-0.100]
#102=[#510+0.64933*#505-0.64933*#510]
#101=[#511+0.64933*#506-0.64933*#511]
#100=[#102+0.55171*#101-0.55171*#102]
N900G1X12.586Y53.260Z[#100+-0.100]
#102=[#510+0.65073*#505-0.65073*#510]
#101=[#511+0.65073*#506-0.65073*#511]
#100=[#102+0.54698*#101-0.54698*#102]
N910G1X12.521Y53.239Z[#100+-0.100]
#102=[#510+0.65507*#505-0.65507*#510]
#101=[#511+0.65507*#506-0.65507*#511]
#100=[#102+0.54545*#101-0.54545*#102]
N920G1X12.500Y53.174Z[#100+-0.100]
#102=[#510+0.68533*#505-0.68533*#510]
#101=[#511+0.68533*#506-0.68533*#511]
#100=[#102+0.54545*#101-0.54545*#102]
N930G1X12.500Y52.720Z[#100+-0.100]
#102=[#510+0.68967*#505-0.68967*#510]
#101=[#511+0.68967*#506-0.68967*#511]
#100=[#102+0.54698*#101-0.54698*#102]
N940G1X12.521Y52.655Z[#100+-0.100]
#102=[#510+0.69107*#505-0.69107*#510]
#101=[#511+0.69107*#506-0.69107*#511]
#100=[#102+0.55171*#101-0.55171*#102]
N950G1X12.586Y52.634Z[#100+-0.100]
#102=[#510+0.70080*#505-0.70080*#510]
#101=[#511+0.70080*#506-0.70080*#511]
#100=[#102+0.65898*#101-0.65898*#102]
N960G1X14.061Y52.488Z[#100+-0.100]
#102=[#510+0.70220*#505-0.70220*#510]
#101=[#511+0.70220*#506-0.70220*#511]
#100=[#102+0.66371*#101-0.66371*#102]
N970G1X14.126Y52.467Z[#100+-0.100]
#102=[#510+0.70653*#505-0.70653*#510]
#101=[#511+0.70653*#506-0.70653*#511]
#100=[#102+0.66524*#101-0.66524*#102]
N980G1X14.147Y52.402Z[#100+-0.100]
#102=[#505+0.03987*#500-0.03987*#505]
#101=[#506+0.03987*#501-0.03987*#506]
#100=[#102+0.66524*#101-0.66524*#102]
N990G1X14.14700Y47.40200Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#505+0.37320*#500-0.37320*#505]
#101=[#506+0.37320*#501-0.37320*#506]
#100=[#102+0.66524*#101-0.66524*#102]
N990G1X14.14700Y42.40200Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#505+0.38020*#500-0.38020*#505]
#101=[#506+0.38020*#501-0.38020*#506]
#100=[#102+0.66524*#101-0.66524*#102]
N990G1X14.147Y42.297Z[#100+-0.100]
#102=[#505+0.38447*#500-0.38447*#505]
#101=[#506+0.38447*#501-0.38447*#506]
#100=[#102+0.66371*#101-0.66371*#102]
N1000G1X14.126Y42.233Z[#100+-0.100]
#102=[#505+0.38587*#500-0.38587*#505]
#101=[#506+0.38587*#501-0.38587*#506]
#100=[#102+0.65898*#101-0.65898*#102]
N1010G1X14.061Y42.212Z[#100+-0.100]
#102=[#505+0.39507*#500-0.39507*#505]
#101=[#506+0.39507*#501-0.39507*#506]
#100=[#102+0.55171*#101-0.55171*#102]
N1020G1X12.586Y42.074Z[#100+-0.100]
#102=[#505+0.39660*#500-0.39660*#505]
#101=[#506+0.39660*#501-0.39660*#506]
#100=[#102+0.54698*#101-0.54698*#102]
N1030G1X12.521Y42.051Z[#100+-0.100]
#102=[#505+0.40133*#500-0.40133*#505]
#101=[#506+0.40133*#501-0.40133*#506]
#100=[#102+0.54545*#101-0.54545*#102]
N1040G1X12.500Y41.980Z[#100+-0.100]
#102=[#505+0.43167*#500-0.43167*#505]
#101=[#506+0.43167*#501-0.43167*#506]
#100=[#102+0.54545*#101-0.54545*#102]
N1050G1X12.500Y41.525Z[#100+-0.100]
#102=[#505+0.43593*#500-0.43593*#505]
#101=[#506+0.43593*#501-0.43593*#506]
#100=[#102+0.54698*#101-0.54698*#102]
N1060G1X12.521Y41.461Z[#100+-0.100]
#102=[#505+0.43733*#500-0.43733*#505]
#101=[#506+0.43733*#501-0.43733*#506]
#100=[#102+0.55171*#101-0.55171*#102]
N1070G1X12.586Y41.440Z[#100+-0.100]
N1080G00X12.586Y41.440Z2.000
N1090G00X25.713Y46.599Z2.000
N1100G00X25.713Y46.599Z1.000
#102=[#506+0.09340*#501-0.09340*#506]
#101=[#507+0.09340*#502-0.09340*#507]
#100=[#102+0.50640*#101-0.50640*#102]
N1110G1X25.713Y46.599Z[#100+-0.050]F100.0
#102=[#506+0.09087*#501-0.09087*#506]
#101=[#507+0.09087*#502-0.09087*#507]
#100=[#102+0.50575*#101-0.50575*#102]
N1120G1X25.704Y46.637Z[#100+-0.050]F600.0
#102=[#506+0.08740*#501-0.08740*#506]
#101=[#507+0.08740*#502-0.08740*#507]
#100=[#102+0.50684*#101-0.50684*#102]
N1130G1X25.719Y46.689Z[#100+-0.050]
#102=[#511+0.80713*#506-0.80713*#511]
#101=[#512+0.80713*#507-0.80713*#512]
#100=[#102+0.62727*#101-0.62727*#102]
N1140G1X27.375Y50.893Z[#100+-0.050]
#102=[#511+0.80460*#506-0.80460*#511]
#101=[#512+0.80460*#507-0.80460*#512]
#100=[#102+0.62909*#101-0.62909*#102]
N1150G1X27.400Y50.931Z[#100+-0.050]
#102=[#511+0.80373*#506-0.80373*#511]
#101=[#512+0.80373*#507-0.80373*#512]
#100=[#102+0.63222*#101-0.63222*#102]
N1160G1X27.443Y50.944Z[#100+-0.050]
#102=[#511+0.80460*#506-0.80460*#511]
#101=[#512+0.80460*#507-0.80460*#512]
#100=[#102+0.63469*#101-0.63469*#102]
N1170G1X27.477Y50.931Z[#100+-0.050]
#102=[#511+0.80713*#506-0.80713*#511]
#101=[#512+0.80713*#507-0.80713*#512]
#100=[#102+0.63724*#101-0.63724*#102]
N1180G1X27.512Y50.893Z[#100+-0.050]
#102=[#506+0.08740*#501-0.08740*#506]
#101=[#507+0.08740*#502-0.08740*#507]
#100=[#102+0.75011*#101-0.75011*#102]
N1190G1X29.064Y46.689Z[#100+-0.050]
#102=[#506+0.09087*#501-0.09087*#506]
#101=[#507+0.09087*#502-0.09087*#507]
#100=[#102+0.75091*#101-0.75091*#102]
N1200G1X29.075Y46.637Z[#100+-0.050]
#102=[#506+0.09340*#501-0.09340*#506]
#101=[#507+0.09340*#502-0.09340*#507]
#100=[#102+0.74996*#101-0.74996*#102]
N1210G1X29.062Y46.599Z[#100+-0.050]
#102=[#506+0.09487*#501-0.09487*#506]
#101=[#507+0.09487*#502-0.09487*#507]
#100=[#102+0.74742*#101-0.74742*#102]
N1220G1X29.027Y46.577Z[#100+-0.050]
#102=[#506+0.09540*#501-0.09540*#506]
#101=[#507+0.09540*#502-0.09540*#507]
#100=[#102+0.74327*#101-0.74327*#102]
N1230G1X28.970Y46.569Z[#100+-0.050]
#102=[#506+0.09540*#501-0.09540*#506]
#101=[#507+0.09540*#502-0.09540*#507]
#100=[#102+0.51244*#101-0.51244*#102]
N1240G1X25.796Y46.569Z[#100+-0.050]
#102=[#506+0.09487*#501-0.09487*#506]
#101=[#507+0.09487*#502-0.09487*#507]
#100=[#102+0.50858*#101-0.50858*#102]
N1250G1X25.743Y46.577Z[#100+-0.050]
#102=[#506+0.09340*#501-0.09340*#506]
#101=[#507+0.09340*#502-0.09340*#507]
#100=[#102+0.50640*#101-0.50640*#102]
N1260G1X25.713Y46.599Z[#100+-0.050]
#102=[#506+0.09340*#501-0.09340*#506]
#101=[#507+0.09340*#502-0.09340*#507]
#100=[#102+0.50640*#101-0.50640*#102]
N1270G1X25.713Y46.599Z[#100+-0.100]F100.0
#102=[#506+0.09087*#501-0.09087*#506]
#101=[#507+0.09087*#502-0.09087*#507]
#100=[#102+0.50575*#101-0.50575*#102]
N1280G1X25.704Y46.637Z[#100+-0.100]F600.0
#102=[#506+0.08740*#501-0.08740*#506]
#101=[#507+0.08740*#502-0.08740*#507]
#100=[#102+0.50684*#101-0.50684*#102]
N1290G1X25.719Y46.689Z[#100+-0.100]
#102=[#511+0.80713*#506-0.80713*#511]
#101=[#512+0.80713*#507-0.80713*#512]
#100=[#102+0.62727*#101-0.62727*#102]
N1300G1X27.375Y50.893Z[#100+-0.100]
#102=[#511+0.80460*#506-0.80460*#511]
#101=[#512+0.80460*#507-0.80460*#512]
#100=[#102+0.62909*#101-0.62909*#102]
N1310G1X27.400Y50.931Z[#100+-0.100]
#102=[#511+0.80373*#506-0.80373*#511]
#101=[#512+0.80373*#507-0.80373*#512]
#100=[#102+0.63222*#101-0.63222*#102]
N1320G1X27.443Y50.944Z[#100+-0.100]
#102=[#511+0.80460*#506-0.80460*#511]
#101=[#512+0.80460*#507-0.80460*#512]
#100=[#102+0.63469*#101-0.63469*#102]
N1330G1X27.477Y50.931Z[#100+-0.100]
#102=[#511+0.80713*#506-0.80713*#511]
#101=[#512+0.80713*#507-0.80713*#512]
#100=[#102+0.63724*#101-0.63724*#102]
N1340G1X27.512Y50.893Z[#100+-0.100]
#102=[#506+0.08740*#501-0.08740*#506]
#101=[#507+0.08740*#502-0.08740*#507]
#100=[#102+0.75011*#101-0.75011*#102]
N1350G1X29.064Y46.689Z[#100+-0.100]
#102=[#506+0.09087*#501-0.09087*#506]
#101=[#507+0.09087*#502-0.09087*#507]
#100=[#102+0.75091*#101-0.75091*#102]
N1360G1X29.075Y46.637Z[#100+-0.100]
#102=[#506+0.09340*#501-0.09340*#506]
#101=[#507+0.09340*#502-0.09340*#507]
#100=[#102+0.74996*#101-0.74996*#102]
N1370G1X29.062Y46.599Z[#100+-0.100]
#102=[#506+0.09487*#501-0.09487*#506]
#101=[#507+0.09487*#502-0.09487*#507]
#100=[#102+0.74742*#101-0.74742*#102]
N1380G1X29.027Y46.577Z[#100+-0.100]
#102=[#506+0.09540*#501-0.09540*#506]
#101=[#507+0.09540*#502-0.09540*#507]
#100=[#102+0.74327*#101-0.74327*#102]
N1390G1X28.970Y46.569Z[#100+-0.100]
#102=[#506+0.09540*#501-0.09540*#506]
#101=[#507+0.09540*#502-0.09540*#507]
#100=[#102+0.51244*#101-0.51244*#102]
N1400G1X25.796Y46.569Z[#100+-0.100]
#102=[#506+0.09487*#501-0.09487*#506]
#101=[#507+0.09487*#502-0.09487*#507]
#100=[#102+0.50858*#101-0.50858*#102]
N1410G1X25.743Y46.577Z[#100+-0.100]
#102=[#506+0.09340*#501-0.09340*#506]
#101=[#507+0.09340*#502-0.09340*#507]
#100=[#102+0.50640*#101-0.50640*#102]
N1420G1X25.713Y46.599Z[#100+-0.100]
N1430G00X25.713Y46.599Z2.000
N1440G00X25.462Y45.832Z2.000
N1450G00X25.462Y45.832Z1.000
#102=[#506+0.14453*#501-0.14453*#506]
#101=[#507+0.14453*#502-0.14453*#507]
#100=[#102+0.48815*#101-0.48815*#102]
N1460G1X25.462Y45.832Z[#100+-0.050]F100.0
#102=[#506+0.14453*#501-0.14453*#506]
#101=[#507+0.14453*#502-0.14453*#507]
#100=[#102+0.76633*#101-0.76633*#102]
N1470G1X29.287Y45.832Z[#100+-0.050]F600.0
#102=[#506+0.14540*#501-0.14540*#506]
#101=[#507+0.14540*#502-0.14540*#507]
#100=[#102+0.76887*#101-0.76887*#102]
N1480G1X29.322Y45.819Z[#100+-0.050]
#102=[#506+0.14800*#501-0.14800*#506]
#101=[#507+0.14800*#502-0.14800*#507]
#100=[#102+0.77135*#101-0.77135*#102]
N1490G1X29.356Y45.780Z[#100+-0.050]
#102=[#506+0.37787*#501-0.37787*#506]
#101=[#507+0.37787*#502-0.37787*#507]
#100=[#102+0.86618*#101-0.86618*#102]
N1500G1X30.660Y42.332Z[#100+-0.050]
#102=[#506+0.38107*#501-0.38107*#506]
#101=[#507+0.38107*#502-0.38107*#507]
#100=[#102+0.86684*#101-0.86684*#102]
N1510G1X30.669Y42.284Z[#100+-0.050]
#102=[#506+0.38360*#501-0.38360*#506]
#101=[#507+0.38360*#502-0.38360*#507]
#100=[#102+0.86618*#101-0.86618*#102]
N1520G1X30.660Y42.246Z[#100+-0.050]
#102=[#506+0.38533*#501-0.38533*#506]
#101=[#507+0.38533*#502-0.38533*#507]
#100=[#102+0.86429*#101-0.86429*#102]
N1530G1X30.634Y42.220Z[#100+-0.050]
#102=[#506+0.38587*#501-0.38587*#506]
#101=[#507+0.38587*#502-0.38587*#507]
#100=[#102+0.86116*#101-0.86116*#102]
N1540G1X30.591Y42.212Z[#100+-0.050]
#102=[#506+0.39507*#501-0.39507*#506]
#101=[#507+0.39507*#502-0.39507*#507]
#100=[#102+0.76138*#101-0.76138*#102]
N1550G1X29.219Y42.074Z[#100+-0.050]
#102=[#506+0.39660*#501-0.39660*#506]
#101=[#507+0.39660*#502-0.39660*#507]
#100=[#102+0.75673*#101-0.75673*#102]
N1560G1X29.155Y42.051Z[#100+-0.050]
#102=[#506+0.40133*#501-0.40133*#506]
#101=[#507+0.40133*#502-0.40133*#507]
#100=[#102+0.75513*#101-0.75513*#102]
N1570G1X29.133Y41.980Z[#100+-0.050]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.75513*#101-0.75513*#102]
N1580G1X29.133Y41.525Z[#100+-0.050]
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.75673*#101-0.75673*#102]
N1590G1X29.155Y41.461Z[#100+-0.050]
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.76138*#101-0.76138*#102]
N1600G1X29.219Y41.440Z[#100+-0.050]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.08953*#101-0.08953*#102]
N1610G1X33.731Y41.440Z[#100+-0.050]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.09469*#101-0.09469*#102]
N1620G1X33.802Y41.461Z[#100+-0.050]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.09636*#101-0.09636*#102]
N1630G1X33.825Y41.525Z[#100+-0.050]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.09636*#101-0.09636*#102]
N1640G1X33.825Y41.980Z[#100+-0.050]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.09498*#101-0.09498*#102]
N1650G1X33.806Y42.051Z[#100+-0.050]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.09076*#101-0.09076*#102]
N1660G1X33.748Y42.074Z[#100+-0.050]
#102=[#506+0.38473*#501-0.38473*#506]
#101=[#507+0.38473*#502-0.38473*#507]
#100=[#102+0.98909*#101-0.98909*#102]
N1670G1X32.350Y42.229Z[#100+-0.050]
#102=[#506+0.38387*#501-0.38387*#506]
#101=[#507+0.38387*#502-0.38387*#507]
#100=[#102+0.98553*#101-0.98553*#102]
N1680G1X32.301Y42.242Z[#100+-0.050]
#102=[#506+0.38133*#501-0.38133*#506]
#101=[#507+0.38133*#502-0.38133*#507]
#100=[#102+0.98349*#101-0.98349*#102]
N1690G1X32.273Y42.280Z[#100+-0.050]
#102=[#506+0.06830*#501-0.06830*#506]
#101=[#507+0.06830*#502-0.06830*#507]
#100=[#102+0.85853*#101-0.85853*#102]
N1700G1X30.55479Y46.97550Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#511+0.75527*#506-0.75527*#511]
#101=[#512+0.75527*#507-0.75527*#512]
#100=[#102+0.73357*#101-0.73357*#102]
N1700G1X28.83657Y51.67100Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#511+0.63273*#506-0.63273*#511]
#101=[#512+0.63273*#507-0.63273*#512]
#100=[#102+0.68465*#101-0.68465*#102]
N1700G1X28.164Y53.509Z[#100+-0.050]
#102=[#511+0.63047*#506-0.63047*#511]
#101=[#512+0.63047*#507-0.63047*#512]
#100=[#102+0.68247*#101-0.68247*#102]
N1710G1X28.134Y53.543Z[#100+-0.050]
#102=[#511+0.62933*#506-0.62933*#511]
#101=[#512+0.62933*#507-0.62933*#512]
#100=[#102+0.67964*#101-0.67964*#102]
N1720G1X28.095Y53.560Z[#100+-0.050]
#102=[#511+0.62933*#506-0.62933*#511]
#101=[#512+0.62933*#507-0.62933*#512]
#100=[#102+0.64785*#101-0.64785*#102]
N1730G1X27.658Y53.560Z[#100+-0.050]
#102=[#511+0.63013*#506-0.63013*#511]
#101=[#512+0.63013*#507-0.63013*#512]
#100=[#102+0.64531*#101-0.64531*#102]
N1740G1X27.623Y53.548Z[#100+-0.050]
#102=[#511+0.63273*#506-0.63273*#511]
#101=[#512+0.63273*#507-0.63273*#512]
#100=[#102+0.64284*#101-0.64284*#102]
N1750G1X27.589Y53.509Z[#100+-0.050]
#102=[#511+0.94250*#506-0.94250*#511]
#101=[#512+0.94250*#507-0.94250*#512]
#100=[#102+0.50855*#101-0.50855*#102]
N1760G1X25.74252Y48.86244Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#506+0.25227*#501-0.25227*#506]
#101=[#507+0.25227*#502-0.25227*#507]
#100=[#102+0.37426*#101-0.37426*#102]
N1760G1X23.89605Y44.21588Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#506+0.38247*#501-0.38247*#506]
#101=[#507+0.38247*#502-0.38247*#507]
#100=[#102+0.31782*#101-0.31782*#102]
N1760G1X23.120Y42.263Z[#100+-0.050]
#102=[#506+0.38473*#501-0.38473*#506]
#101=[#507+0.38473*#502-0.38473*#507]
#100=[#102+0.31564*#101-0.31564*#102]
N1770G1X23.090Y42.229Z[#100+-0.050]
#102=[#506+0.38587*#501-0.38587*#506]
#101=[#507+0.38587*#502-0.38587*#507]
#100=[#102+0.31280*#101-0.31280*#102]
N1780G1X23.051Y42.212Z[#100+-0.050]
#102=[#506+0.39507*#501-0.39507*#506]
#101=[#507+0.39507*#502-0.39507*#507]
#100=[#102+0.20800*#101-0.20800*#102]
N1790G1X21.610Y42.074Z[#100+-0.050]
#102=[#506+0.39660*#501-0.39660*#506]
#101=[#507+0.39660*#502-0.39660*#507]
#100=[#102+0.20335*#101-0.20335*#102]
N1800G1X21.546Y42.051Z[#100+-0.050]
#102=[#506+0.40133*#501-0.40133*#506]
#101=[#507+0.40133*#502-0.40133*#507]
#100=[#102+0.20175*#101-0.20175*#102]
N1810G1X21.524Y41.980Z[#100+-0.050]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.20175*#101-0.20175*#102]
N1820G1X21.524Y41.525Z[#100+-0.050]
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.20335*#101-0.20335*#102]
N1830G1X21.546Y41.461Z[#100+-0.050]
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.20800*#101-0.20800*#102]
N1840G1X21.610Y41.440Z[#100+-0.050]
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.48436*#101-0.48436*#102]
N1850G1X25.410Y41.440Z[#100+-0.050]
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.48902*#101-0.48902*#102]
N1860G1X25.474Y41.461Z[#100+-0.050]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.49062*#101-0.49062*#102]
N1870G1X25.496Y41.525Z[#100+-0.050]
#102=[#506+0.40133*#501-0.40133*#506]
#101=[#507+0.40133*#502-0.40133*#507]
#100=[#102+0.49062*#101-0.49062*#102]
N1880G1X25.496Y41.980Z[#100+-0.050]
#102=[#506+0.39693*#501-0.39693*#506]
#101=[#507+0.39693*#502-0.39693*#507]
#100=[#102+0.48902*#101-0.48902*#102]
N1890G1X25.474Y42.046Z[#100+-0.050]
#102=[#506+0.39507*#501-0.39507*#506]
#101=[#507+0.39507*#502-0.39507*#507]
#100=[#102+0.48436*#101-0.48436*#102]
N1900G1X25.410Y42.074Z[#100+-0.050]
#102=[#506+0.38820*#501-0.38820*#506]
#101=[#507+0.38820*#502-0.38820*#507]
#100=[#102+0.38829*#101-0.38829*#102]
N1910G1X24.089Y42.177Z[#100+-0.050]
#102=[#506+0.38747*#501-0.38747*#506]
#101=[#507+0.38747*#502-0.38747*#507]
#100=[#102+0.38436*#101-0.38436*#102]
N1920G1X24.035Y42.188Z[#100+-0.050]
#102=[#506+0.38587*#501-0.38587*#506]
#101=[#507+0.38587*#502-0.38587*#507]
#100=[#102+0.38204*#101-0.38204*#102]
N1930G1X24.003Y42.212Z[#100+-0.050]
#102=[#506+0.38347*#501-0.38347*#506]
#101=[#507+0.38347*#502-0.38347*#507]
#100=[#102+0.38131*#101-0.38131*#102]
N1940G1X23.993Y42.248Z[#100+-0.050]
#102=[#506+0.38020*#501-0.38020*#506]
#101=[#507+0.38020*#502-0.38020*#507]
#100=[#102+0.38204*#101-0.38204*#102]
N1950G1X24.003Y42.297Z[#100+-0.050]
#102=[#506+0.14800*#501-0.14800*#506]
#101=[#507+0.14800*#502-0.14800*#507]
#100=[#102+0.48313*#101-0.48313*#102]
N1960G1X25.393Y45.780Z[#100+-0.050]
#102=[#506+0.14573*#501-0.14573*#506]
#101=[#507+0.14573*#502-0.14573*#507]
#100=[#102+0.48531*#101-0.48531*#102]
N1970G1X25.423Y45.814Z[#100+-0.050]
#102=[#506+0.14453*#501-0.14453*#506]
#101=[#507+0.14453*#502-0.14453*#507]
#100=[#102+0.48815*#101-0.48815*#102]
N1980G1X25.462Y45.832Z[#100+-0.050]
#102=[#506+0.14453*#501-0.14453*#506]
#101=[#507+0.14453*#502-0.14453*#507]
#100=[#102+0.48815*#101-0.48815*#102]
N1990G1X25.462Y45.832Z[#100+-0.100]F100.0
#102=[#506+0.14453*#501-0.14453*#506]
#101=[#507+0.14453*#502-0.14453*#507]
#100=[#102+0.76633*#101-0.76633*#102]
N2000G1X29.287Y45.832Z[#100+-0.100]F600.0
#102=[#506+0.14540*#501-0.14540*#506]
#101=[#507+0.14540*#502-0.14540*#507]
#100=[#102+0.76887*#101-0.76887*#102]
N2010G1X29.322Y45.819Z[#100+-0.100]
#102=[#506+0.14800*#501-0.14800*#506]
#101=[#507+0.14800*#502-0.14800*#507]
#100=[#102+0.77135*#101-0.77135*#102]
N2020G1X29.356Y45.780Z[#100+-0.100]
#102=[#506+0.37787*#501-0.37787*#506]
#101=[#507+0.37787*#502-0.37787*#507]
#100=[#102+0.86618*#101-0.86618*#102]
N2030G1X30.660Y42.332Z[#100+-0.100]
#102=[#506+0.38107*#501-0.38107*#506]
#101=[#507+0.38107*#502-0.38107*#507]
#100=[#102+0.86684*#101-0.86684*#102]
N2040G1X30.669Y42.284Z[#100+-0.100]
#102=[#506+0.38360*#501-0.38360*#506]
#101=[#507+0.38360*#502-0.38360*#507]
#100=[#102+0.86618*#101-0.86618*#102]
N2050G1X30.660Y42.246Z[#100+-0.100]
#102=[#506+0.38533*#501-0.38533*#506]
#101=[#507+0.38533*#502-0.38533*#507]
#100=[#102+0.86429*#101-0.86429*#102]
N2060G1X30.634Y42.220Z[#100+-0.100]
#102=[#506+0.38587*#501-0.38587*#506]
#101=[#507+0.38587*#502-0.38587*#507]
#100=[#102+0.86116*#101-0.86116*#102]
N2070G1X30.591Y42.212Z[#100+-0.100]
#102=[#506+0.39507*#501-0.39507*#506]
#101=[#507+0.39507*#502-0.39507*#507]
#100=[#102+0.76138*#101-0.76138*#102]
N2080G1X29.219Y42.074Z[#100+-0.100]
#102=[#506+0.39660*#501-0.39660*#506]
#101=[#507+0.39660*#502-0.39660*#507]
#100=[#102+0.75673*#101-0.75673*#102]
N2090G1X29.155Y42.051Z[#100+-0.100]
#102=[#506+0.40133*#501-0.40133*#506]
#101=[#507+0.40133*#502-0.40133*#507]
#100=[#102+0.75513*#101-0.75513*#102]
N2100G1X29.133Y41.980Z[#100+-0.100]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.75513*#101-0.75513*#102]
N2110G1X29.133Y41.525Z[#100+-0.100]
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.75673*#101-0.75673*#102]
N2120G1X29.155Y41.461Z[#100+-0.100]
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.76138*#101-0.76138*#102]
N2130G1X29.219Y41.440Z[#100+-0.100]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.08953*#101-0.08953*#102]
N2140G1X33.731Y41.440Z[#100+-0.100]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.09469*#101-0.09469*#102]
N2150G1X33.802Y41.461Z[#100+-0.100]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.09636*#101-0.09636*#102]
N2160G1X33.825Y41.525Z[#100+-0.100]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.09636*#101-0.09636*#102]
N2170G1X33.825Y41.980Z[#100+-0.100]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.09498*#101-0.09498*#102]
N2180G1X33.806Y42.051Z[#100+-0.100]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.09076*#101-0.09076*#102]
N2190G1X33.748Y42.074Z[#100+-0.100]
#102=[#506+0.38473*#501-0.38473*#506]
#101=[#507+0.38473*#502-0.38473*#507]
#100=[#102+0.98909*#101-0.98909*#102]
N2200G1X32.350Y42.229Z[#100+-0.100]
#102=[#506+0.38387*#501-0.38387*#506]
#101=[#507+0.38387*#502-0.38387*#507]
#100=[#102+0.98553*#101-0.98553*#102]
N2210G1X32.301Y42.242Z[#100+-0.100]
#102=[#506+0.38133*#501-0.38133*#506]
#101=[#507+0.38133*#502-0.38133*#507]
#100=[#102+0.98349*#101-0.98349*#102]
N2220G1X32.273Y42.280Z[#100+-0.100]
#102=[#506+0.06830*#501-0.06830*#506]
#101=[#507+0.06830*#502-0.06830*#507]
#100=[#102+0.85853*#101-0.85853*#102]
N2230G1X30.55479Y46.97550Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#511+0.75527*#506-0.75527*#511]
#101=[#512+0.75527*#507-0.75527*#512]
#100=[#102+0.73357*#101-0.73357*#102]
N2230G1X28.83657Y51.67100Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#511+0.63273*#506-0.63273*#511]
#101=[#512+0.63273*#507-0.63273*#512]
#100=[#102+0.68465*#101-0.68465*#102]
N2230G1X28.164Y53.509Z[#100+-0.100]
#102=[#511+0.63047*#506-0.63047*#511]
#101=[#512+0.63047*#507-0.63047*#512]
#100=[#102+0.68247*#101-0.68247*#102]
N2240G1X28.134Y53.543Z[#100+-0.100]
#102=[#511+0.62933*#506-0.62933*#511]
#101=[#512+0.62933*#507-0.62933*#512]
#100=[#102+0.67964*#101-0.67964*#102]
N2250G1X28.095Y53.560Z[#100+-0.100]
#102=[#511+0.62933*#506-0.62933*#511]
#101=[#512+0.62933*#507-0.62933*#512]
#100=[#102+0.64785*#101-0.64785*#102]
N2260G1X27.658Y53.560Z[#100+-0.100]
#102=[#511+0.63013*#506-0.63013*#511]
#101=[#512+0.63013*#507-0.63013*#512]
#100=[#102+0.64531*#101-0.64531*#102]
N2270G1X27.623Y53.548Z[#100+-0.100]
#102=[#511+0.63273*#506-0.63273*#511]
#101=[#512+0.63273*#507-0.63273*#512]
#100=[#102+0.64284*#101-0.64284*#102]
N2280G1X27.589Y53.509Z[#100+-0.100]
#102=[#511+0.94250*#506-0.94250*#511]
#101=[#512+0.94250*#507-0.94250*#512]
#100=[#102+0.50855*#101-0.50855*#102]
N2290G1X25.74252Y48.86244Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#506+0.25227*#501-0.25227*#506]
#101=[#507+0.25227*#502-0.25227*#507]
#100=[#102+0.37426*#101-0.37426*#102]
N2290G1X23.89605Y44.21588Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#506+0.38247*#501-0.38247*#506]
#101=[#507+0.38247*#502-0.38247*#507]
#100=[#102+0.31782*#101-0.31782*#102]
N2290G1X23.120Y42.263Z[#100+-0.100]
#102=[#506+0.38473*#501-0.38473*#506]
#101=[#507+0.38473*#502-0.38473*#507]
#100=[#102+0.31564*#101-0.31564*#102]
N2300G1X23.090Y42.229Z[#100+-0.100]
#102=[#506+0.38587*#501-0.38587*#506]
#101=[#507+0.38587*#502-0.38587*#507]
#100=[#102+0.31280*#101-0.31280*#102]
N2310G1X23.051Y42.212Z[#100+-0.100]
#102=[#506+0.39507*#501-0.39507*#506]
#101=[#507+0.39507*#502-0.39507*#507]
#100=[#102+0.20800*#101-0.20800*#102]
N2320G1X21.610Y42.074Z[#100+-0.100]
#102=[#506+0.39660*#501-0.39660*#506]
#101=[#507+0.39660*#502-0.39660*#507]
#100=[#102+0.20335*#101-0.20335*#102]
N2330G1X21.546Y42.051Z[#100+-0.100]
#102=[#506+0.40133*#501-0.40133*#506]
#101=[#507+0.40133*#502-0.40133*#507]
#100=[#102+0.20175*#101-0.20175*#102]
N2340G1X21.524Y41.980Z[#100+-0.100]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.20175*#101-0.20175*#102]
N2350G1X21.524Y41.525Z[#100+-0.100]
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.20335*#101-0.20335*#102]
N2360G1X21.546Y41.461Z[#100+-0.100]
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.20800*#101-0.20800*#102]
N2370G1X21.610Y41.440Z[#100+-0.100]
#102=[#506+0.43733*#501-0.43733*#506]
#101=[#507+0.43733*#502-0.43733*#507]
#100=[#102+0.48436*#101-0.48436*#102]
N2380G1X25.410Y41.440Z[#100+-0.100]
#102=[#506+0.43593*#501-0.43593*#506]
#101=[#507+0.43593*#502-0.43593*#507]
#100=[#102+0.48902*#101-0.48902*#102]
N2390G1X25.474Y41.461Z[#100+-0.100]
#102=[#506+0.43167*#501-0.43167*#506]
#101=[#507+0.43167*#502-0.43167*#507]
#100=[#102+0.49062*#101-0.49062*#102]
N2400G1X25.496Y41.525Z[#100+-0.100]
#102=[#506+0.40133*#501-0.40133*#506]
#101=[#507+0.40133*#502-0.40133*#507]
#100=[#102+0.49062*#101-0.49062*#102]
N2410G1X25.496Y41.980Z[#100+-0.100]
#102=[#506+0.39693*#501-0.39693*#506]
#101=[#507+0.39693*#502-0.39693*#507]
#100=[#102+0.48902*#101-0.48902*#102]
N2420G1X25.474Y42.046Z[#100+-0.100]
#102=[#506+0.39507*#501-0.39507*#506]
#101=[#507+0.39507*#502-0.39507*#507]
#100=[#102+0.48436*#101-0.48436*#102]
N2430G1X25.410Y42.074Z[#100+-0.100]
#102=[#506+0.38820*#501-0.38820*#506]
#101=[#507+0.38820*#502-0.38820*#507]
#100=[#102+0.38829*#101-0.38829*#102]
N2440G1X24.089Y42.177Z[#100+-0.100]
#102=[#506+0.38747*#501-0.38747*#506]
#101=[#507+0.38747*#502-0.38747*#507]
#100=[#102+0.38436*#101-0.38436*#102]
N2450G1X24.035Y42.188Z[#100+-0.100]
#102=[#506+0.38587*#501-0.38587*#506]
#101=[#507+0.38587*#502-0.38587*#507]
#100=[#102+0.38204*#101-0.38204*#102]
N2460G1X24.003Y42.212Z[#100+-0.100]
#102=[#506+0.38347*#501-0.38347*#506]
#101=[#507+0.38347*#502-0.38347*#507]
#100=[#102+0.38131*#101-0.38131*#102]
N2470G1X23.993Y42.248Z[#100+-0.100]
#102=[#506+0.38020*#501-0.38020*#506]
#101=[#507+0.38020*#502-0.38020*#507]
#100=[#102+0.38204*#101-0.38204*#102]
N2480G1X24.003Y42.297Z[#100+-0.100]
#102=[#506+0.14800*#501-0.14800*#506]
#101=[#507+0.14800*#502-0.14800*#507]
#100=[#102+0.48313*#101-0.48313*#102]
N2490G1X25.393Y45.780Z[#100+-0.100]
#102=[#506+0.14573*#501-0.14573*#506]
#101=[#507+0.14573*#502-0.14573*#507]
#100=[#102+0.48531*#101-0.48531*#102]
N2500G1X25.423Y45.814Z[#100+-0.100]
#102=[#506+0.14453*#501-0.14453*#506]
#101=[#507+0.14453*#502-0.14453*#507]
#100=[#102+0.48815*#101-0.48815*#102]
N2510G1X25.462Y45.832Z[#100+-0.100]
N2520G00X25.462Y45.832Z2.000
N2530G00X34.670Y42.051Z2.000
N2540G00X34.670Y42.051Z1.000
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.15782*#101-0.15782*#102]
N2550G1X34.670Y42.051Z[#100+-0.050]F100.0
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.15629*#101-0.15629*#102]
N2560G1X34.649Y41.980Z[#100+-0.050]F600.0
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.15629*#101-0.15629*#102]
N2570G1X34.649Y41.525Z[#100+-0.050]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.15782*#101-0.15782*#102]
N2580G1X34.670Y41.461Z[#100+-0.050]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.16255*#101-0.16255*#102]
N2590G1X34.735Y41.440Z[#100+-0.050]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.50625*#101-0.50625*#102]
N2600G1X39.461Y41.440Z[#100+-0.050]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.51098*#101-0.51098*#102]
N2610G1X39.526Y41.461Z[#100+-0.050]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.51251*#101-0.51251*#102]
N2620G1X39.547Y41.525Z[#100+-0.050]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.51251*#101-0.51251*#102]
N2630G1X39.547Y41.980Z[#100+-0.050]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.51098*#101-0.51098*#102]
N2640G1X39.526Y42.051Z[#100+-0.050]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.50625*#101-0.50625*#102]
N2650G1X39.461Y42.074Z[#100+-0.050]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.39775*#101-0.39775*#102]
N2660G1X37.969Y42.212Z[#100+-0.050]
#102=[#507+0.38447*#502-0.38447*#507]
#101=[#508+0.38447*#503-0.38447*#508]
#100=[#102+0.39302*#101-0.39302*#102]
N2670G1X37.904Y42.233Z[#100+-0.050]
#102=[#507+0.38020*#502-0.38020*#507]
#101=[#508+0.38020*#503-0.38020*#508]
#100=[#102+0.39149*#101-0.39149*#102]
N2680G1X37.883Y42.297Z[#100+-0.050]
#102=[#507+0.04687*#502-0.04687*#507]
#101=[#508+0.04687*#503-0.04687*#508]
#100=[#102+0.39149*#101-0.39149*#102]
N2690G1X37.88300Y47.29700Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#512+0.71353*#507-0.71353*#512]
#101=[#513+0.71353*#508-0.71353*#513]
#100=[#102+0.39149*#101-0.39149*#102]
N2690G1X37.88300Y52.29700Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#512+0.70653*#507-0.70653*#512]
#101=[#513+0.70653*#508-0.70653*#513]
#100=[#102+0.39149*#101-0.39149*#102]
N2690G1X37.883Y52.402Z[#100+-0.050]
#102=[#512+0.70220*#507-0.70220*#512]
#101=[#513+0.70220*#508-0.70220*#513]
#100=[#102+0.39302*#101-0.39302*#102]
N2700G1X37.904Y52.467Z[#100+-0.050]
#102=[#512+0.70080*#507-0.70080*#512]
#101=[#513+0.70080*#508-0.70080*#513]
#100=[#102+0.39775*#101-0.39775*#102]
N2710G1X37.969Y52.488Z[#100+-0.050]
#102=[#512+0.69107*#507-0.69107*#512]
#101=[#513+0.69107*#508-0.69107*#513]
#100=[#102+0.50625*#101-0.50625*#102]
N2720G1X39.461Y52.634Z[#100+-0.050]
#102=[#512+0.68967*#507-0.68967*#512]
#101=[#513+0.68967*#508-0.68967*#513]
#100=[#102+0.51098*#101-0.51098*#102]
N2730G1X39.526Y52.655Z[#100+-0.050]
#102=[#512+0.68533*#507-0.68533*#512]
#101=[#513+0.68533*#508-0.68533*#513]
#100=[#102+0.51251*#101-0.51251*#102]
N2740G1X39.547Y52.720Z[#100+-0.050]
#102=[#512+0.65507*#507-0.65507*#512]
#101=[#513+0.65507*#508-0.65507*#513]
#100=[#102+0.51251*#101-0.51251*#102]
N2750G1X39.547Y53.174Z[#100+-0.050]
#102=[#512+0.65073*#507-0.65073*#512]
#101=[#513+0.65073*#508-0.65073*#513]
#100=[#102+0.51098*#101-0.51098*#102]
N2760G1X39.526Y53.239Z[#100+-0.050]
#102=[#512+0.64933*#507-0.64933*#512]
#101=[#513+0.64933*#508-0.64933*#513]
#100=[#102+0.50625*#101-0.50625*#102]
N2770G1X39.461Y53.260Z[#100+-0.050]
#102=[#512+0.64933*#507-0.64933*#512]
#101=[#513+0.64933*#508-0.64933*#513]
#100=[#102+0.16255*#101-0.16255*#102]
N2780G1X34.735Y53.260Z[#100+-0.050]
#102=[#512+0.65073*#507-0.65073*#512]
#101=[#513+0.65073*#508-0.65073*#513]
#100=[#102+0.15782*#101-0.15782*#102]
N2790G1X34.670Y53.239Z[#100+-0.050]
#102=[#512+0.65507*#507-0.65507*#512]
#101=[#513+0.65507*#508-0.65507*#513]
#100=[#102+0.15629*#101-0.15629*#102]
N2800G1X34.649Y53.174Z[#100+-0.050]
#102=[#512+0.68533*#507-0.68533*#512]
#101=[#513+0.68533*#508-0.68533*#513]
#100=[#102+0.15629*#101-0.15629*#102]
N2810G1X34.649Y52.720Z[#100+-0.050]
#102=[#512+0.68967*#507-0.68967*#512]
#101=[#513+0.68967*#508-0.68967*#513]
#100=[#102+0.15782*#101-0.15782*#102]
N2820G1X34.670Y52.655Z[#100+-0.050]
#102=[#512+0.69107*#507-0.69107*#512]
#101=[#513+0.69107*#508-0.69107*#513]
#100=[#102+0.16255*#101-0.16255*#102]
N2830G1X34.735Y52.634Z[#100+-0.050]
#102=[#512+0.70080*#507-0.70080*#512]
#101=[#513+0.70080*#508-0.70080*#513]
#100=[#102+0.27105*#101-0.27105*#102]
N2840G1X36.227Y52.488Z[#100+-0.050]
#102=[#512+0.70220*#507-0.70220*#512]
#101=[#513+0.70220*#508-0.70220*#513]
#100=[#102+0.27578*#101-0.27578*#102]
N2850G1X36.292Y52.467Z[#100+-0.050]
#102=[#512+0.70653*#507-0.70653*#512]
#101=[#513+0.70653*#508-0.70653*#513]
#100=[#102+0.27731*#101-0.27731*#102]
N2860G1X36.313Y52.402Z[#100+-0.050]
#102=[#507+0.03987*#502-0.03987*#507]
#101=[#508+0.03987*#503-0.03987*#508]
#100=[#102+0.27731*#101-0.27731*#102]
N2870G1X36.31300Y47.40200Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#507+0.37320*#502-0.37320*#507]
#101=[#508+0.37320*#503-0.37320*#508]
#100=[#102+0.27731*#101-0.27731*#102]
N2870G1X36.31300Y42.40200Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#507+0.38020*#502-0.38020*#507]
#101=[#508+0.38020*#503-0.38020*#508]
#100=[#102+0.27731*#101-0.27731*#102]
N2870G1X36.313Y42.297Z[#100+-0.050]
#102=[#507+0.38447*#502-0.38447*#507]
#101=[#508+0.38447*#503-0.38447*#508]
#100=[#102+0.27578*#101-0.27578*#102]
N2880G1X36.292Y42.233Z[#100+-0.050]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.27105*#101-0.27105*#102]
N2890G1X36.227Y42.212Z[#100+-0.050]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.16255*#101-0.16255*#102]
N2900G1X34.735Y42.074Z[#100+-0.050]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.15782*#101-0.15782*#102]
N2910G1X34.670Y42.051Z[#100+-0.050]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.15782*#101-0.15782*#102]
N2920G1X34.670Y42.051Z[#100+-0.100]F100.0
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.15629*#101-0.15629*#102]
N2930G1X34.649Y41.980Z[#100+-0.100]F600.0
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.15629*#101-0.15629*#102]
N2940G1X34.649Y41.525Z[#100+-0.100]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.15782*#101-0.15782*#102]
N2950G1X34.670Y41.461Z[#100+-0.100]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.16255*#101-0.16255*#102]
N2960G1X34.735Y41.440Z[#100+-0.100]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.50625*#101-0.50625*#102]
N2970G1X39.461Y41.440Z[#100+-0.100]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.51098*#101-0.51098*#102]
N2980G1X39.526Y41.461Z[#100+-0.100]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.51251*#101-0.51251*#102]
N2990G1X39.547Y41.525Z[#100+-0.100]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.51251*#101-0.51251*#102]
N3000G1X39.547Y41.980Z[#100+-0.100]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.51098*#101-0.51098*#102]
N3010G1X39.526Y42.051Z[#100+-0.100]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.50625*#101-0.50625*#102]
N3020G1X39.461Y42.074Z[#100+-0.100]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.39775*#101-0.39775*#102]
N3030G1X37.969Y42.212Z[#100+-0.100]
#102=[#507+0.38447*#502-0.38447*#507]
#101=[#508+0.38447*#503-0.38447*#508]
#100=[#102+0.39302*#101-0.39302*#102]
N3040G1X37.904Y42.233Z[#100+-0.100]
#102=[#507+0.38020*#502-0.38020*#507]
#101=[#508+0.38020*#503-0.38020*#508]
#100=[#102+0.39149*#101-0.39149*#102]
N3050G1X37.883Y42.297Z[#100+-0.100]
#102=[#507+0.04687*#502-0.04687*#507]
#101=[#508+0.04687*#503-0.04687*#508]
#100=[#102+0.39149*#101-0.39149*#102]
N3060G1X37.88300Y47.29700Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#512+0.71353*#507-0.71353*#512]
#101=[#513+0.71353*#508-0.71353*#513]
#100=[#102+0.39149*#101-0.39149*#102]
N3060G1X37.88300Y52.29700Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#512+0.70653*#507-0.70653*#512]
#101=[#513+0.70653*#508-0.70653*#513]
#100=[#102+0.39149*#101-0.39149*#102]
N3060G1X37.883Y52.402Z[#100+-0.100]
#102=[#512+0.70220*#507-0.70220*#512]
#101=[#513+0.70220*#508-0.70220*#513]
#100=[#102+0.39302*#101-0.39302*#102]
N3070G1X37.904Y52.467Z[#100+-0.100]
#102=[#512+0.70080*#507-0.70080*#512]
#101=[#513+0.70080*#508-0.70080*#513]
#100=[#102+0.39775*#101-0.39775*#102]
N3080G1X37.969Y52.488Z[#100+-0.100]
#102=[#512+0.69107*#507-0.69107*#512]
#101=[#513+0.69107*#508-0.69107*#513]
#100=[#102+0.50625*#101-0.50625*#102]
N3090G1X39.461Y52.634Z[#100+-0.100]
#102=[#512+0.68967*#507-0.68967*#512]
#101=[#513+0.68967*#508-0.68967*#513]
#100=[#102+0.51098*#101-0.51098*#102]
N3100G1X39.526Y52.655Z[#100+-0.100]
#102=[#512+0.68533*#507-0.68533*#512]
#101=[#513+0.68533*#508-0.68533*#513]
#100=[#102+0.51251*#101-0.51251*#102]
N3110G1X39.547Y52.720Z[#100+-0.100]
#102=[#512+0.65507*#507-0.65507*#512]
#101=[#513+0.65507*#508-0.65507*#513]
#100=[#102+0.51251*#101-0.51251*#102]
N3120G1X39.547Y53.174Z[#100+-0.100]
#102=[#512+0.65073*#507-0.65073*#512]
#101=[#513+0.65073*#508-0.65073*#513]
#100=[#102+0.51098*#101-0.51098*#102]
N3130G1X39.526Y53.239Z[#100+-0.100]
#102=[#512+0.64933*#507-0.64933*#512]
#101=[#513+0.64933*#508-0.64933*#513]
#100=[#102+0.50625*#101-0.50625*#102]
N3140G1X39.461Y53.260Z[#100+-0.100]
#102=[#512+0.64933*#507-0.64933*#512]
#101=[#513+0.64933*#508-0.64933*#513]
#100=[#102+0.16255*#101-0.16255*#102]
N3150G1X34.735Y53.260Z[#100+-0.100]
#102=[#512+0.65073*#507-0.65073*#512]
#101=[#513+0.65073*#508-0.65073*#513]
#100=[#102+0.15782*#101-0.15782*#102]
N3160G1X34.670Y53.239Z[#100+-0.100]
#102=[#512+0.65507*#507-0.65507*#512]
#101=[#513+0.65507*#508-0.65507*#513]
#100=[#102+0.15629*#101-0.15629*#102]
N3170G1X34.649Y53.174Z[#100+-0.100]
#102=[#512+0.68533*#507-0.68533*#512]
#101=[#513+0.68533*#508-0.68533*#513]
#100=[#102+0.15629*#101-0.15629*#102]
N3180G1X34.649Y52.720Z[#100+-0.100]
#102=[#512+0.68967*#507-0.68967*#512]
#101=[#513+0.68967*#508-0.68967*#513]
#100=[#102+0.15782*#101-0.15782*#102]
N3190G1X34.670Y52.655Z[#100+-0.100]
#102=[#512+0.69107*#507-0.69107*#512]
#101=[#513+0.69107*#508-0.69107*#513]
#100=[#102+0.16255*#101-0.16255*#102]
N3200G1X34.735Y52.634Z[#100+-0.100]
#102=[#512+0.70080*#507-0.70080*#512]
#101=[#513+0.70080*#508-0.70080*#513]
#100=[#102+0.27105*#101-0.27105*#102]
N3210G1X36.227Y52.488Z[#100+-0.100]
#102=[#512+0.70220*#507-0.70220*#512]
#101=[#513+0.70220*#508-0.70220*#513]
#100=[#102+0.27578*#101-0.27578*#102]
N3220G1X36.292Y52.467Z[#100+-0.100]
#102=[#512+0.70653*#507-0.70653*#512]
#101=[#513+0.70653*#508-0.70653*#513]
#100=[#102+0.27731*#101-0.27731*#102]
N3230G1X36.313Y52.402Z[#100+-0.100]
#102=[#507+0.03987*#502-0.03987*#507]
#101=[#508+0.03987*#503-0.03987*#508]
#100=[#102+0.27731*#101-0.27731*#102]
N3240G1X36.31300Y47.40200Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#507+0.37320*#502-0.37320*#507]
#101=[#508+0.37320*#503-0.37320*#508]
#100=[#102+0.27731*#101-0.27731*#102]
N3240G1X36.31300Y42.40200Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#507+0.38020*#502-0.38020*#507]
#101=[#508+0.38020*#503-0.38020*#508]
#100=[#102+0.27731*#101-0.27731*#102]
N3240G1X36.313Y42.297Z[#100+-0.100]
#102=[#507+0.38447*#502-0.38447*#507]
#101=[#508+0.38447*#503-0.38447*#508]
#100=[#102+0.27578*#101-0.27578*#102]
N3250G1X36.292Y42.233Z[#100+-0.100]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.27105*#101-0.27105*#102]
N3260G1X36.227Y42.212Z[#100+-0.100]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.16255*#101-0.16255*#102]
N3270G1X34.735Y42.074Z[#100+-0.100]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.15782*#101-0.15782*#102]
N3280G1X34.670Y42.051Z[#100+-0.100]
N3290G00X34.670Y42.051Z2.000
N3300G00X44.387Y46.599Z2.000
N3310G00X44.387Y46.599Z1.000
#102=[#507+0.09340*#502-0.09340*#507]
#101=[#508+0.09340*#503-0.09340*#508]
#100=[#102+0.86451*#101-0.86451*#102]
N3320G1X44.387Y46.599Z[#100+-0.050]F100.0
#102=[#507+0.09087*#502-0.09087*#507]
#101=[#508+0.09087*#503-0.09087*#508]
#100=[#102+0.86393*#101-0.86393*#102]
N3330G1X44.379Y46.637Z[#100+-0.050]F600.0
#102=[#507+0.08740*#502-0.08740*#507]
#101=[#508+0.08740*#503-0.08740*#508]
#100=[#102+0.86502*#101-0.86502*#102]
N3340G1X44.394Y46.689Z[#100+-0.050]
#102=[#512+0.80713*#507-0.80713*#512]
#101=[#513+0.80713*#508-0.80713*#513]
#100=[#102+0.98538*#101-0.98538*#102]
N3350G1X46.049Y50.893Z[#100+-0.050]
#102=[#512+0.80460*#507-0.80460*#512]
#101=[#513+0.80460*#508-0.80460*#513]
#100=[#102+0.98727*#101-0.98727*#102]
N3360G1X46.075Y50.931Z[#100+-0.050]
#102=[#512+0.80373*#507-0.80373*#512]
#101=[#513+0.80373*#508-0.80373*#513]
#100=[#102+0.99040*#101-0.99040*#102]
N3370G1X46.118Y50.944Z[#100+-0.050]
#102=[#512+0.80460*#507-0.80460*#512]
#101=[#513+0.80460*#508-0.80460*#513]
#100=[#102+0.99287*#101-0.99287*#102]
N3380G1X46.152Y50.931Z[#100+-0.050]
#102=[#512+0.80713*#507-0.80713*#512]
#101=[#513+0.80713*#508-0.80713*#513]
#100=[#102+0.99535*#101-0.99535*#102]
N3390G1X46.186Y50.893Z[#100+-0.050]
#102=[#508+0.08740*#503-0.08740*#508]
#101=[#509+0.08740*#504-0.08740*#509]
#100=[#102+0.10829*#101-0.10829*#102]
N3400G1X47.739Y46.689Z[#100+-0.050]
#102=[#508+0.09087*#503-0.09087*#508]
#101=[#509+0.09087*#504-0.09087*#509]
#100=[#102+0.10902*#101-0.10902*#102]
N3410G1X47.749Y46.637Z[#100+-0.050]
#102=[#508+0.09340*#503-0.09340*#508]
#101=[#509+0.09340*#504-0.09340*#509]
#100=[#102+0.10815*#101-0.10815*#102]
N3420G1X47.737Y46.599Z[#100+-0.050]
#102=[#508+0.09487*#503-0.09487*#508]
#101=[#509+0.09487*#504-0.09487*#509]
#100=[#102+0.10560*#101-0.10560*#102]
N3430G1X47.702Y46.577Z[#100+-0.050]
#102=[#508+0.09540*#503-0.09540*#508]
#101=[#509+0.09540*#504-0.09540*#509]
#100=[#102+0.10145*#101-0.10145*#102]
N3440G1X47.645Y46.569Z[#100+-0.050]
#102=[#507+0.09540*#502-0.09540*#507]
#101=[#508+0.09540*#503-0.09540*#508]
#100=[#102+0.87062*#101-0.87062*#102]
N3450G1X44.471Y46.569Z[#100+-0.050]
#102=[#507+0.09487*#502-0.09487*#507]
#101=[#508+0.09487*#503-0.09487*#508]
#100=[#102+0.86676*#101-0.86676*#102]
N3460G1X44.418Y46.577Z[#100+-0.050]
#102=[#507+0.09340*#502-0.09340*#507]
#101=[#508+0.09340*#503-0.09340*#508]
#100=[#102+0.86451*#101-0.86451*#102]
N3470G1X44.387Y46.599Z[#100+-0.050]
#102=[#507+0.09340*#502-0.09340*#507]
#101=[#508+0.09340*#503-0.09340*#508]
#100=[#102+0.86451*#101-0.86451*#102]
N3480G1X44.387Y46.599Z[#100+-0.100]F100.0
#102=[#507+0.09087*#502-0.09087*#507]
#101=[#508+0.09087*#503-0.09087*#508]
#100=[#102+0.86393*#101-0.86393*#102]
N3490G1X44.379Y46.637Z[#100+-0.100]F600.0
#102=[#507+0.08740*#502-0.08740*#507]
#101=[#508+0.08740*#503-0.08740*#508]
#100=[#102+0.86502*#101-0.86502*#102]
N3500G1X44.394Y46.689Z[#100+-0.100]
#102=[#512+0.80713*#507-0.80713*#512]
#101=[#513+0.80713*#508-0.80713*#513]
#100=[#102+0.98538*#101-0.98538*#102]
N3510G1X46.049Y50.893Z[#100+-0.100]
#102=[#512+0.80460*#507-0.80460*#512]
#101=[#513+0.80460*#508-0.80460*#513]
#100=[#102+0.98727*#101-0.98727*#102]
N3520G1X46.075Y50.931Z[#100+-0.100]
#102=[#512+0.80373*#507-0.80373*#512]
#101=[#513+0.80373*#508-0.80373*#513]
#100=[#102+0.99040*#101-0.99040*#102]
N3530G1X46.118Y50.944Z[#100+-0.100]
#102=[#512+0.80460*#507-0.80460*#512]
#101=[#513+0.80460*#508-0.80460*#513]
#100=[#102+0.99287*#101-0.99287*#102]
N3540G1X46.152Y50.931Z[#100+-0.100]
#102=[#512+0.80713*#507-0.80713*#512]
#101=[#513+0.80713*#508-0.80713*#513]
#100=[#102+0.99535*#101-0.99535*#102]
N3550G1X46.186Y50.893Z[#100+-0.100]
#102=[#508+0.08740*#503-0.08740*#508]
#101=[#509+0.08740*#504-0.08740*#509]
#100=[#102+0.10829*#101-0.10829*#102]
N3560G1X47.739Y46.689Z[#100+-0.100]
#102=[#508+0.09087*#503-0.09087*#508]
#101=[#509+0.09087*#504-0.09087*#509]
#100=[#102+0.10902*#101-0.10902*#102]
N3570G1X47.749Y46.637Z[#100+-0.100]
#102=[#508+0.09340*#503-0.09340*#508]
#101=[#509+0.09340*#504-0.09340*#509]
#100=[#102+0.10815*#101-0.10815*#102]
N3580G1X47.737Y46.599Z[#100+-0.100]
#102=[#508+0.09487*#503-0.09487*#508]
#101=[#509+0.09487*#504-0.09487*#509]
#100=[#102+0.10560*#101-0.10560*#102]
N3590G1X47.702Y46.577Z[#100+-0.100]
#102=[#508+0.09540*#503-0.09540*#508]
#101=[#509+0.09540*#504-0.09540*#509]
#100=[#102+0.10145*#101-0.10145*#102]
N3600G1X47.645Y46.569Z[#100+-0.100]
#102=[#507+0.09540*#502-0.09540*#507]
#101=[#508+0.09540*#503-0.09540*#508]
#100=[#102+0.87062*#101-0.87062*#102]
N3610G1X44.471Y46.569Z[#100+-0.100]
#102=[#507+0.09487*#502-0.09487*#507]
#101=[#508+0.09487*#503-0.09487*#508]
#100=[#102+0.86676*#101-0.86676*#102]
N3620G1X44.418Y46.577Z[#100+-0.100]
#102=[#507+0.09340*#502-0.09340*#507]
#101=[#508+0.09340*#503-0.09340*#508]
#100=[#102+0.86451*#101-0.86451*#102]
N3630G1X44.387Y46.599Z[#100+-0.100]
N3640G00X44.387Y46.599Z2.000
N3650G00X44.136Y45.832Z2.000
N3660G00X44.136Y45.832Z1.000
#102=[#507+0.14453*#502-0.14453*#507]
#101=[#508+0.14453*#503-0.14453*#508]
#100=[#102+0.84625*#101-0.84625*#102]
N3670G1X44.136Y45.832Z[#100+-0.050]F100.0
#102=[#508+0.14453*#503-0.14453*#508]
#101=[#509+0.14453*#504-0.14453*#509]
#100=[#102+0.12451*#101-0.12451*#102]
N3680G1X47.962Y45.832Z[#100+-0.050]F600.0
#102=[#508+0.14540*#503-0.14540*#508]
#101=[#509+0.14540*#504-0.14540*#509]
#100=[#102+0.12698*#101-0.12698*#102]
N3690G1X47.996Y45.819Z[#100+-0.050]
#102=[#508+0.14800*#503-0.14800*#508]
#101=[#509+0.14800*#504-0.14800*#509]
#100=[#102+0.12953*#101-0.12953*#102]
N3700G1X48.031Y45.780Z[#100+-0.050]
#102=[#508+0.37787*#503-0.37787*#508]
#101=[#509+0.37787*#504-0.37787*#509]
#100=[#102+0.22436*#101-0.22436*#102]
N3710G1X49.335Y42.332Z[#100+-0.050]
#102=[#508+0.38107*#503-0.38107*#508]
#101=[#509+0.38107*#504-0.38107*#509]
#100=[#102+0.22495*#101-0.22495*#102]
N3720G1X49.343Y42.284Z[#100+-0.050]
#102=[#508+0.38360*#503-0.38360*#508]
#101=[#509+0.38360*#504-0.38360*#509]
#100=[#102+0.22436*#101-0.22436*#102]
N3730G1X49.335Y42.246Z[#100+-0.050]
#102=[#508+0.38533*#503-0.38533*#508]
#101=[#509+0.38533*#504-0.38533*#509]
#100=[#102+0.22247*#101-0.22247*#102]
N3740G1X49.309Y42.220Z[#100+-0.050]
#102=[#508+0.38587*#503-0.38587*#508]
#101=[#509+0.38587*#504-0.38587*#509]
#100=[#102+0.21935*#101-0.21935*#102]
N3750G1X49.266Y42.212Z[#100+-0.050]
#102=[#508+0.39507*#503-0.39507*#508]
#101=[#509+0.39507*#504-0.39507*#509]
#100=[#102+0.11956*#101-0.11956*#102]
N3760G1X47.894Y42.074Z[#100+-0.050]
#102=[#508+0.39660*#503-0.39660*#508]
#101=[#509+0.39660*#504-0.39660*#509]
#100=[#102+0.11484*#101-0.11484*#102]
N3770G1X47.829Y42.051Z[#100+-0.050]
#102=[#508+0.40133*#503-0.40133*#508]
#101=[#509+0.40133*#504-0.40133*#509]
#100=[#102+0.11331*#101-0.11331*#102]
N3780G1X47.808Y41.980Z[#100+-0.050]
#102=[#508+0.43167*#503-0.43167*#508]
#101=[#509+0.43167*#504-0.43167*#509]
#100=[#102+0.11331*#101-0.11331*#102]
N3790G1X47.808Y41.525Z[#100+-0.050]
#102=[#508+0.43593*#503-0.43593*#508]
#101=[#509+0.43593*#504-0.43593*#509]
#100=[#102+0.11484*#101-0.11484*#102]
N3800G1X47.829Y41.461Z[#100+-0.050]
#102=[#508+0.43733*#503-0.43733*#508]
#101=[#509+0.43733*#504-0.43733*#509]
#100=[#102+0.11956*#101-0.11956*#102]
N3810G1X47.894Y41.440Z[#100+-0.050]
#102=[#508+0.43733*#503-0.43733*#508]
#101=[#509+0.43733*#504-0.43733*#509]
#100=[#102+0.44771*#101-0.44771*#102]
N3820G1X52.406Y41.440Z[#100+-0.050]
#102=[#508+0.43593*#503-0.43593*#508]
#101=[#509+0.43593*#504-0.43593*#509]
#100=[#102+0.45280*#101-0.45280*#102]
N3830G1X52.476Y41.461Z[#100+-0.050]
#102=[#508+0.43167*#503-0.43167*#508]
#101=[#509+0.43167*#504-0.43167*#509]
#100=[#102+0.45455*#101-0.45455*#102]
N3840G1X52.500Y41.525Z[#100+-0.050]
#102=[#508+0.40133*#503-0.40133*#508]
#101=[#509+0.40133*#504-0.40133*#509]
#100=[#102+0.45455*#101-0.45455*#102]
N3850G1X52.500Y41.980Z[#100+-0.050]
#102=[#508+0.39660*#503-0.39660*#508]
#101=[#509+0.39660*#504-0.39660*#509]
#100=[#102+0.45316*#101-0.45316*#102]
N3860G1X52.481Y42.051Z[#100+-0.050]
#102=[#508+0.39507*#503-0.39507*#508]
#101=[#509+0.39507*#504-0.39507*#509]
#100=[#102+0.44895*#101-0.44895*#102]
N3870G1X52.423Y42.074Z[#100+-0.050]
#102=[#508+0.38473*#503-0.38473*#508]
#101=[#509+0.38473*#504-0.38473*#509]
#100=[#102+0.34727*#101-0.34727*#102]
N3880G1X51.025Y42.229Z[#100+-0.050]
#102=[#508+0.38387*#503-0.38387*#508]
#101=[#509+0.38387*#504-0.38387*#509]
#100=[#102+0.34364*#101-0.34364*#102]
N3890G1X50.975Y42.242Z[#100+-0.050]
#102=[#508+0.38133*#503-0.38133*#508]
#101=[#509+0.38133*#504-0.38133*#509]
#100=[#102+0.34160*#101-0.34160*#102]
N3900G1X50.947Y42.280Z[#100+-0.050]
#102=[#508+0.06830*#503-0.06830*#508]
#101=[#509+0.06830*#504-0.06830*#509]
#100=[#102+0.21664*#101-0.21664*#102]
N3910G1X49.22879Y46.97550Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#513+0.75527*#508-0.75527*#513]
#101=[#514+0.75527*#509-0.75527*#514]
#100=[#102+0.09168*#101-0.09168*#102]
N3910G1X47.51057Y51.67100Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#513+0.63273*#508-0.63273*#513]
#101=[#514+0.63273*#509-0.63273*#514]
#100=[#102+0.04276*#101-0.04276*#102]
N3910G1X46.838Y53.509Z[#100+-0.050]
#102=[#513+0.63047*#508-0.63047*#513]
#101=[#514+0.63047*#509-0.63047*#514]
#100=[#102+0.04058*#101-0.04058*#102]
N3920G1X46.808Y53.543Z[#100+-0.050]
#102=[#513+0.62933*#508-0.62933*#513]
#101=[#514+0.62933*#509-0.62933*#514]
#100=[#102+0.03782*#101-0.03782*#102]
N3930G1X46.770Y53.560Z[#100+-0.050]
#102=[#513+0.62933*#508-0.62933*#513]
#101=[#514+0.62933*#509-0.62933*#514]
#100=[#102+0.00596*#101-0.00596*#102]
N3940G1X46.332Y53.560Z[#100+-0.050]
#102=[#513+0.63013*#508-0.63013*#513]
#101=[#514+0.63013*#509-0.63013*#514]
#100=[#102+0.00349*#101-0.00349*#102]
N3950G1X46.298Y53.548Z[#100+-0.050]
#102=[#513+0.63273*#508-0.63273*#513]
#101=[#514+0.63273*#509-0.63273*#514]
#100=[#102+0.00102*#101-0.00102*#102]
N3960G1X46.264Y53.509Z[#100+-0.050]
#102=[#512+0.94249*#507-0.94249*#512]
#101=[#513+0.94249*#508-0.94249*#513]
#100=[#102+0.86670*#101-0.86670*#102]
N3970G1X44.41717Y48.86258Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#507+0.25226*#502-0.25226*#507]
#101=[#508+0.25226*#503-0.25226*#508]
#100=[#102+0.73239*#101-0.73239*#102]
N3970G1X42.57033Y44.21616Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#507+0.38247*#502-0.38247*#507]
#101=[#508+0.38247*#503-0.38247*#508]
#100=[#102+0.67593*#101-0.67593*#102]
N3970G1X41.794Y42.263Z[#100+-0.050]
#102=[#507+0.38473*#502-0.38473*#507]
#101=[#508+0.38473*#503-0.38473*#508]
#100=[#102+0.67375*#101-0.67375*#102]
N3980G1X41.764Y42.229Z[#100+-0.050]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.67098*#101-0.67098*#102]
N3990G1X41.726Y42.212Z[#100+-0.050]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.56618*#101-0.56618*#102]
N4000G1X40.285Y42.074Z[#100+-0.050]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.56145*#101-0.56145*#102]
N4010G1X40.220Y42.051Z[#100+-0.050]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.55993*#101-0.55993*#102]
N4020G1X40.199Y41.980Z[#100+-0.050]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.55993*#101-0.55993*#102]
N4030G1X40.199Y41.525Z[#100+-0.050]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.56145*#101-0.56145*#102]
N4040G1X40.220Y41.461Z[#100+-0.050]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.56618*#101-0.56618*#102]
N4050G1X40.285Y41.440Z[#100+-0.050]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.84255*#101-0.84255*#102]
N4060G1X44.085Y41.440Z[#100+-0.050]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.84720*#101-0.84720*#102]
N4070G1X44.149Y41.461Z[#100+-0.050]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.84880*#101-0.84880*#102]
N4080G1X44.171Y41.525Z[#100+-0.050]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.84880*#101-0.84880*#102]
N4090G1X44.171Y41.980Z[#100+-0.050]
#102=[#507+0.39693*#502-0.39693*#507]
#101=[#508+0.39693*#503-0.39693*#508]
#100=[#102+0.84720*#101-0.84720*#102]
N4100G1X44.149Y42.046Z[#100+-0.050]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.84255*#101-0.84255*#102]
N4110G1X44.085Y42.074Z[#100+-0.050]
#102=[#507+0.38820*#502-0.38820*#507]
#101=[#508+0.38820*#503-0.38820*#508]
#100=[#102+0.74647*#101-0.74647*#102]
N4120G1X42.764Y42.177Z[#100+-0.050]
#102=[#507+0.38747*#502-0.38747*#507]
#101=[#508+0.38747*#503-0.38747*#508]
#100=[#102+0.74255*#101-0.74255*#102]
N4130G1X42.710Y42.188Z[#100+-0.050]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.74022*#101-0.74022*#102]
N4140G1X42.678Y42.212Z[#100+-0.050]
#102=[#507+0.38347*#502-0.38347*#507]
#101=[#508+0.38347*#503-0.38347*#508]
#100=[#102+0.73942*#101-0.73942*#102]
N4150G1X42.667Y42.248Z[#100+-0.050]
#102=[#507+0.38020*#502-0.38020*#507]
#101=[#508+0.38020*#503-0.38020*#508]
#100=[#102+0.74022*#101-0.74022*#102]
N4160G1X42.678Y42.297Z[#100+-0.050]
#102=[#507+0.14800*#502-0.14800*#507]
#101=[#508+0.14800*#503-0.14800*#508]
#100=[#102+0.84131*#101-0.84131*#102]
N4170G1X44.068Y45.780Z[#100+-0.050]
#102=[#507+0.14573*#502-0.14573*#507]
#101=[#508+0.14573*#503-0.14573*#508]
#100=[#102+0.84349*#101-0.84349*#102]
N4180G1X44.098Y45.814Z[#100+-0.050]
#102=[#507+0.14453*#502-0.14453*#507]
#101=[#508+0.14453*#503-0.14453*#508]
#100=[#102+0.84625*#101-0.84625*#102]
N4190G1X44.136Y45.832Z[#100+-0.050]
#102=[#507+0.14453*#502-0.14453*#507]
#101=[#508+0.14453*#503-0.14453*#508]
#100=[#102+0.84625*#101-0.84625*#102]
N4200G1X44.136Y45.832Z[#100+-0.100]F100.0
#102=[#508+0.14453*#503-0.14453*#508]
#101=[#509+0.14453*#504-0.14453*#509]
#100=[#102+0.12451*#101-0.12451*#102]
N4210G1X47.962Y45.832Z[#100+-0.100]F600.0
#102=[#508+0.14540*#503-0.14540*#508]
#101=[#509+0.14540*#504-0.14540*#509]
#100=[#102+0.12698*#101-0.12698*#102]
N4220G1X47.996Y45.819Z[#100+-0.100]
#102=[#508+0.14800*#503-0.14800*#508]
#101=[#509+0.14800*#504-0.14800*#509]
#100=[#102+0.12953*#101-0.12953*#102]
N4230G1X48.031Y45.780Z[#100+-0.100]
#102=[#508+0.37787*#503-0.37787*#508]
#101=[#509+0.37787*#504-0.37787*#509]
#100=[#102+0.22436*#101-0.22436*#102]
N4240G1X49.335Y42.332Z[#100+-0.100]
#102=[#508+0.38107*#503-0.38107*#508]
#101=[#509+0.38107*#504-0.38107*#509]
#100=[#102+0.22495*#101-0.22495*#102]
N4250G1X49.343Y42.284Z[#100+-0.100]
#102=[#508+0.38360*#503-0.38360*#508]
#101=[#509+0.38360*#504-0.38360*#509]
#100=[#102+0.22436*#101-0.22436*#102]
N4260G1X49.335Y42.246Z[#100+-0.100]
#102=[#508+0.38533*#503-0.38533*#508]
#101=[#509+0.38533*#504-0.38533*#509]
#100=[#102+0.22247*#101-0.22247*#102]
N4270G1X49.309Y42.220Z[#100+-0.100]
#102=[#508+0.38587*#503-0.38587*#508]
#101=[#509+0.38587*#504-0.38587*#509]
#100=[#102+0.21935*#101-0.21935*#102]
N4280G1X49.266Y42.212Z[#100+-0.100]
#102=[#508+0.39507*#503-0.39507*#508]
#101=[#509+0.39507*#504-0.39507*#509]
#100=[#102+0.11956*#101-0.11956*#102]
N4290G1X47.894Y42.074Z[#100+-0.100]
#102=[#508+0.39660*#503-0.39660*#508]
#101=[#509+0.39660*#504-0.39660*#509]
#100=[#102+0.11484*#101-0.11484*#102]
N4300G1X47.829Y42.051Z[#100+-0.100]
#102=[#508+0.40133*#503-0.40133*#508]
#101=[#509+0.40133*#504-0.40133*#509]
#100=[#102+0.11331*#101-0.11331*#102]
N4310G1X47.808Y41.980Z[#100+-0.100]
#102=[#508+0.43167*#503-0.43167*#508]
#101=[#509+0.43167*#504-0.43167*#509]
#100=[#102+0.11331*#101-0.11331*#102]
N4320G1X47.808Y41.525Z[#100+-0.100]
#102=[#508+0.43593*#503-0.43593*#508]
#101=[#509+0.43593*#504-0.43593*#509]
#100=[#102+0.11484*#101-0.11484*#102]
N4330G1X47.829Y41.461Z[#100+-0.100]
#102=[#508+0.43733*#503-0.43733*#508]
#101=[#509+0.43733*#504-0.43733*#509]
#100=[#102+0.11956*#101-0.11956*#102]
N4340G1X47.894Y41.440Z[#100+-0.100]
#102=[#508+0.43733*#503-0.43733*#508]
#101=[#509+0.43733*#504-0.43733*#509]
#100=[#102+0.44771*#101-0.44771*#102]
N4350G1X52.406Y41.440Z[#100+-0.100]
#102=[#508+0.43593*#503-0.43593*#508]
#101=[#509+0.43593*#504-0.43593*#509]
#100=[#102+0.45280*#101-0.45280*#102]
N4360G1X52.476Y41.461Z[#100+-0.100]
#102=[#508+0.43167*#503-0.43167*#508]
#101=[#509+0.43167*#504-0.43167*#509]
#100=[#102+0.45455*#101-0.45455*#102]
N4370G1X52.500Y41.525Z[#100+-0.100]
#102=[#508+0.40133*#503-0.40133*#508]
#101=[#509+0.40133*#504-0.40133*#509]
#100=[#102+0.45455*#101-0.45455*#102]
N4380G1X52.500Y41.980Z[#100+-0.100]
#102=[#508+0.39660*#503-0.39660*#508]
#101=[#509+0.39660*#504-0.39660*#509]
#100=[#102+0.45316*#101-0.45316*#102]
N4390G1X52.481Y42.051Z[#100+-0.100]
#102=[#508+0.39507*#503-0.39507*#508]
#101=[#509+0.39507*#504-0.39507*#509]
#100=[#102+0.44895*#101-0.44895*#102]
N4400G1X52.423Y42.074Z[#100+-0.100]
#102=[#508+0.38473*#503-0.38473*#508]
#101=[#509+0.38473*#504-0.38473*#509]
#100=[#102+0.34727*#101-0.34727*#102]
N4410G1X51.025Y42.229Z[#100+-0.100]
#102=[#508+0.38387*#503-0.38387*#508]
#101=[#509+0.38387*#504-0.38387*#509]
#100=[#102+0.34364*#101-0.34364*#102]
N4420G1X50.975Y42.242Z[#100+-0.100]
#102=[#508+0.38133*#503-0.38133*#508]
#101=[#509+0.38133*#504-0.38133*#509]
#100=[#102+0.34160*#101-0.34160*#102]
N4430G1X50.947Y42.280Z[#100+-0.100]
#102=[#508+0.06830*#503-0.06830*#508]
#101=[#509+0.06830*#504-0.06830*#509]
#100=[#102+0.21664*#101-0.21664*#102]
N4440G1X49.22879Y46.97550Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#513+0.75527*#508-0.75527*#513]
#101=[#514+0.75527*#509-0.75527*#514]
#100=[#102+0.09168*#101-0.09168*#102]
N4440G1X47.51057Y51.67100Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#513+0.63273*#508-0.63273*#513]
#101=[#514+0.63273*#509-0.63273*#514]
#100=[#102+0.04276*#101-0.04276*#102]
N4440G1X46.838Y53.509Z[#100+-0.100]
#102=[#513+0.63047*#508-0.63047*#513]
#101=[#514+0.63047*#509-0.63047*#514]
#100=[#102+0.04058*#101-0.04058*#102]
N4450G1X46.808Y53.543Z[#100+-0.100]
#102=[#513+0.62933*#508-0.62933*#513]
#101=[#514+0.62933*#509-0.62933*#514]
#100=[#102+0.03782*#101-0.03782*#102]
N4460G1X46.770Y53.560Z[#100+-0.100]
#102=[#513+0.62933*#508-0.62933*#513]
#101=[#514+0.62933*#509-0.62933*#514]
#100=[#102+0.00596*#101-0.00596*#102]
N4470G1X46.332Y53.560Z[#100+-0.100]
#102=[#513+0.63013*#508-0.63013*#513]
#101=[#514+0.63013*#509-0.63013*#514]
#100=[#102+0.00349*#101-0.00349*#102]
N4480G1X46.298Y53.548Z[#100+-0.100]
#102=[#513+0.63273*#508-0.63273*#513]
#101=[#514+0.63273*#509-0.63273*#514]
#100=[#102+0.00102*#101-0.00102*#102]
N4490G1X46.264Y53.509Z[#100+-0.100]
#102=[#512+0.94249*#507-0.94249*#512]
#101=[#513+0.94249*#508-0.94249*#513]
#100=[#102+0.86670*#101-0.86670*#102]
N4500G1X44.41717Y48.86258Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#507+0.25226*#502-0.25226*#507]
#101=[#508+0.25226*#503-0.25226*#508]
#100=[#102+0.73239*#101-0.73239*#102]
N4500G1X42.57033Y44.21616Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#507+0.38247*#502-0.38247*#507]
#101=[#508+0.38247*#503-0.38247*#508]
#100=[#102+0.67593*#101-0.67593*#102]
N4500G1X41.794Y42.263Z[#100+-0.100]
#102=[#507+0.38473*#502-0.38473*#507]
#101=[#508+0.38473*#503-0.38473*#508]
#100=[#102+0.67375*#101-0.67375*#102]
N4510G1X41.764Y42.229Z[#100+-0.100]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.67098*#101-0.67098*#102]
N4520G1X41.726Y42.212Z[#100+-0.100]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.56618*#101-0.56618*#102]
N4530G1X40.285Y42.074Z[#100+-0.100]
#102=[#507+0.39660*#502-0.39660*#507]
#101=[#508+0.39660*#503-0.39660*#508]
#100=[#102+0.56145*#101-0.56145*#102]
N4540G1X40.220Y42.051Z[#100+-0.100]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.55993*#101-0.55993*#102]
N4550G1X40.199Y41.980Z[#100+-0.100]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.55993*#101-0.55993*#102]
N4560G1X40.199Y41.525Z[#100+-0.100]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.56145*#101-0.56145*#102]
N4570G1X40.220Y41.461Z[#100+-0.100]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.56618*#101-0.56618*#102]
N4580G1X40.285Y41.440Z[#100+-0.100]
#102=[#507+0.43733*#502-0.43733*#507]
#101=[#508+0.43733*#503-0.43733*#508]
#100=[#102+0.84255*#101-0.84255*#102]
N4590G1X44.085Y41.440Z[#100+-0.100]
#102=[#507+0.43593*#502-0.43593*#507]
#101=[#508+0.43593*#503-0.43593*#508]
#100=[#102+0.84720*#101-0.84720*#102]
N4600G1X44.149Y41.461Z[#100+-0.100]
#102=[#507+0.43167*#502-0.43167*#507]
#101=[#508+0.43167*#503-0.43167*#508]
#100=[#102+0.84880*#101-0.84880*#102]
N4610G1X44.171Y41.525Z[#100+-0.100]
#102=[#507+0.40133*#502-0.40133*#507]
#101=[#508+0.40133*#503-0.40133*#508]
#100=[#102+0.84880*#101-0.84880*#102]
N4620G1X44.171Y41.980Z[#100+-0.100]
#102=[#507+0.39693*#502-0.39693*#507]
#101=[#508+0.39693*#503-0.39693*#508]
#100=[#102+0.84720*#101-0.84720*#102]
N4630G1X44.149Y42.046Z[#100+-0.100]
#102=[#507+0.39507*#502-0.39507*#507]
#101=[#508+0.39507*#503-0.39507*#508]
#100=[#102+0.84255*#101-0.84255*#102]
N4640G1X44.085Y42.074Z[#100+-0.100]
#102=[#507+0.38820*#502-0.38820*#507]
#101=[#508+0.38820*#503-0.38820*#508]
#100=[#102+0.74647*#101-0.74647*#102]
N4650G1X42.764Y42.177Z[#100+-0.100]
#102=[#507+0.38747*#502-0.38747*#507]
#101=[#508+0.38747*#503-0.38747*#508]
#100=[#102+0.74255*#101-0.74255*#102]
N4660G1X42.710Y42.188Z[#100+-0.100]
#102=[#507+0.38587*#502-0.38587*#507]
#101=[#508+0.38587*#503-0.38587*#508]
#100=[#102+0.74022*#101-0.74022*#102]
N4670G1X42.678Y42.212Z[#100+-0.100]
#102=[#507+0.38347*#502-0.38347*#507]
#101=[#508+0.38347*#503-0.38347*#508]
#100=[#102+0.73942*#101-0.73942*#102]
N4680G1X42.667Y42.248Z[#100+-0.100]
#102=[#507+0.38020*#502-0.38020*#507]
#101=[#508+0.38020*#503-0.38020*#508]
#100=[#102+0.74022*#101-0.74022*#102]
N4690G1X42.678Y42.297Z[#100+-0.100]
#102=[#507+0.14800*#502-0.14800*#507]
#101=[#508+0.14800*#503-0.14800*#508]
#100=[#102+0.84131*#101-0.84131*#102]
N4700G1X44.068Y45.780Z[#100+-0.100]
#102=[#507+0.14573*#502-0.14573*#507]
#101=[#508+0.14573*#503-0.14573*#508]
#100=[#102+0.84349*#101-0.84349*#102]
N4710G1X44.098Y45.814Z[#100+-0.100]
#102=[#507+0.14453*#502-0.14453*#507]
#101=[#508+0.14453*#503-0.14453*#508]
#100=[#102+0.84625*#101-0.84625*#102]
N4720G1X44.136Y45.832Z[#100+-0.100]
N4730G00X44.136Y45.832Z2.000
N4740G00X54.500Y35.000Z2.000
N4750G00X54.500Y35.000Z1.000
#102=[#508+0.86667*#503-0.86667*#508]
#101=[#509+0.86667*#504-0.86667*#509]
#100=[#102+0.60000*#101-0.60000*#102]
N4760G1X54.500Y35.000Z[#100+-0.050]F100.0
#102=[#508+0.86667*#503-0.86667*#508]
#101=[#509+0.86667*#504-0.86667*#509]
#100=[#102+0.23636*#101-0.23636*#102]
N4770G1X49.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#507+0.86667*#502-0.86667*#507]
#101=[#508+0.86667*#503-0.86667*#508]
#100=[#102+0.87273*#101-0.87273*#102]
N4770G1X44.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#507+0.86667*#502-0.86667*#507]
#101=[#508+0.86667*#503-0.86667*#508]
#100=[#102+0.50909*#101-0.50909*#102]
N4770G1X39.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#507+0.86667*#502-0.86667*#507]
#101=[#508+0.86667*#503-0.86667*#508]
#100=[#102+0.14545*#101-0.14545*#102]
N4770G1X34.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.86667*#501-0.86667*#506]
#101=[#507+0.86667*#502-0.86667*#507]
#100=[#102+0.78182*#101-0.78182*#102]
N4770G1X29.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.86667*#501-0.86667*#506]
#101=[#507+0.86667*#502-0.86667*#507]
#100=[#102+0.41818*#101-0.41818*#102]
N4770G1X24.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.86667*#501-0.86667*#506]
#101=[#507+0.86667*#502-0.86667*#507]
#100=[#102+0.05455*#101-0.05455*#102]
N4770G1X19.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#505+0.86667*#500-0.86667*#505]
#101=[#506+0.86667*#501-0.86667*#506]
#100=[#102+0.69091*#101-0.69091*#102]
N4770G1X14.50000Y35.00000Z[#100+-0.050]F600.0 ;segmented line. Max segment length set to 5
#102=[#505+0.86667*#500-0.86667*#505]
#101=[#506+0.86667*#501-0.86667*#506]
#100=[#102+0.40000*#101-0.40000*#102]
N4770G1X10.500Y35.000Z[#100+-0.050]F600.0
#102=[#505+0.66667*#500-0.66667*#505]
#101=[#506+0.66667*#501-0.66667*#506]
#100=[#102+0.18182*#101-0.18182*#102]
N4780G3X7.500Y38.000Z[#100+-0.050]I-3.000J0.000
#102=[#505+0.33333*#500-0.33333*#505]
#101=[#506+0.33333*#501-0.33333*#506]
#100=[#102+0.18182*#101-0.18182*#102]
N4790G1X7.50000Y43.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#505+0*#505-0*#505]
#101=[#506+0*#506-0*#506]
#100=[#102+0.18182*#101-0.18182*#102]
N4790G1X7.50000Y48.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#510+0.66667*#505-0.66667*#510]
#101=[#511+0.66667*#506-0.66667*#511]
#100=[#102+0.18182*#101-0.18182*#102]
N4790G1X7.50000Y53.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#510+0.40000*#505-0.40000*#510]
#101=[#511+0.40000*#506-0.40000*#511]
#100=[#102+0.18182*#101-0.18182*#102]
N4790G1X7.500Y57.000Z[#100+-0.050]
#102=[#510+0.20000*#505-0.20000*#510]
#101=[#511+0.20000*#506-0.20000*#511]
#100=[#102+0.40000*#101-0.40000*#102]
N4800G3X10.500Y60.000Z[#100+-0.050]I0.000J3.000
#102=[#510+0.20000*#505-0.20000*#510]
#101=[#511+0.20000*#506-0.20000*#511]
#100=[#102+0.76364*#101-0.76364*#102]
N4810G1X15.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#511+0.20000*#506-0.20000*#511]
#101=[#512+0.20000*#507-0.20000*#512]
#100=[#102+0.12727*#101-0.12727*#102]
N4810G1X20.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#511+0.20000*#506-0.20000*#511]
#101=[#512+0.20000*#507-0.20000*#512]
#100=[#102+0.49091*#101-0.49091*#102]
N4810G1X25.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#511+0.20000*#506-0.20000*#511]
#101=[#512+0.20000*#507-0.20000*#512]
#100=[#102+0.85455*#101-0.85455*#102]
N4810G1X30.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#512+0.20000*#507-0.20000*#512]
#101=[#513+0.20000*#508-0.20000*#513]
#100=[#102+0.21818*#101-0.21818*#102]
N4810G1X35.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#512+0.20000*#507-0.20000*#512]
#101=[#513+0.20000*#508-0.20000*#513]
#100=[#102+0.58182*#101-0.58182*#102]
N4810G1X40.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#512+0.20000*#507-0.20000*#512]
#101=[#513+0.20000*#508-0.20000*#513]
#100=[#102+0.94545*#101-0.94545*#102]
N4810G1X45.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#513+0.20000*#508-0.20000*#513]
#101=[#514+0.20000*#509-0.20000*#514]
#100=[#102+0.30909*#101-0.30909*#102]
N4810G1X50.50000Y60.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#513+0.20000*#508-0.20000*#513]
#101=[#514+0.20000*#509-0.20000*#514]
#100=[#102+0.60000*#101-0.60000*#102]
N4810G1X54.500Y60.000Z[#100+-0.050]
#102=[#513+0.40000*#508-0.40000*#513]
#101=[#514+0.40000*#509-0.40000*#514]
#100=[#102+0.81818*#101-0.81818*#102]
N4820G3X57.500Y57.000Z[#100+-0.050]I3.000J0.000
#102=[#513+0.73333*#508-0.73333*#513]
#101=[#514+0.73333*#509-0.73333*#514]
#100=[#102+0.81818*#101-0.81818*#102]
N4830G1X57.50000Y52.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#508+0.06667*#503-0.06667*#508]
#101=[#509+0.06667*#504-0.06667*#509]
#100=[#102+0.81818*#101-0.81818*#102]
N4830G1X57.50000Y47.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#508+0.40000*#503-0.40000*#508]
#101=[#509+0.40000*#504-0.40000*#509]
#100=[#102+0.81818*#101-0.81818*#102]
N4830G1X57.50000Y42.00000Z[#100+-0.050] ;segmented line. Max segment length set to 5
#102=[#508+0.66667*#503-0.66667*#508]
#101=[#509+0.66667*#504-0.66667*#509]
#100=[#102+0.81818*#101-0.81818*#102]
N4830G1X57.500Y38.000Z[#100+-0.050]
#102=[#508+0.86667*#503-0.86667*#508]
#101=[#509+0.86667*#504-0.86667*#509]
#100=[#102+0.60000*#101-0.60000*#102]
N4840G3X54.500Y35.000Z[#100+-0.050]I0.000J-3.000
#102=[#508+0.86667*#503-0.86667*#508]
#101=[#509+0.86667*#504-0.86667*#509]
#100=[#102+0.60000*#101-0.60000*#102]
N4850G1X54.500Y35.000Z[#100+-0.100]F100.0
#102=[#508+0.86667*#503-0.86667*#508]
#101=[#509+0.86667*#504-0.86667*#509]
#100=[#102+0.23636*#101-0.23636*#102]
N4860G1X49.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#507+0.86667*#502-0.86667*#507]
#101=[#508+0.86667*#503-0.86667*#508]
#100=[#102+0.87273*#101-0.87273*#102]
N4860G1X44.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#507+0.86667*#502-0.86667*#507]
#101=[#508+0.86667*#503-0.86667*#508]
#100=[#102+0.50909*#101-0.50909*#102]
N4860G1X39.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#507+0.86667*#502-0.86667*#507]
#101=[#508+0.86667*#503-0.86667*#508]
#100=[#102+0.14545*#101-0.14545*#102]
N4860G1X34.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.86667*#501-0.86667*#506]
#101=[#507+0.86667*#502-0.86667*#507]
#100=[#102+0.78182*#101-0.78182*#102]
N4860G1X29.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.86667*#501-0.86667*#506]
#101=[#507+0.86667*#502-0.86667*#507]
#100=[#102+0.41818*#101-0.41818*#102]
N4860G1X24.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#506+0.86667*#501-0.86667*#506]
#101=[#507+0.86667*#502-0.86667*#507]
#100=[#102+0.05455*#101-0.05455*#102]
N4860G1X19.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#505+0.86667*#500-0.86667*#505]
#101=[#506+0.86667*#501-0.86667*#506]
#100=[#102+0.69091*#101-0.69091*#102]
N4860G1X14.50000Y35.00000Z[#100+-0.100]F600.0 ;segmented line. Max segment length set to 5
#102=[#505+0.86667*#500-0.86667*#505]
#101=[#506+0.86667*#501-0.86667*#506]
#100=[#102+0.40000*#101-0.40000*#102]
N4860G1X10.500Y35.000Z[#100+-0.100]F600.0
#102=[#505+0.66667*#500-0.66667*#505]
#101=[#506+0.66667*#501-0.66667*#506]
#100=[#102+0.18182*#101-0.18182*#102]
N4870G3X7.500Y38.000Z[#100+-0.100]I-3.000J0.000
#102=[#505+0.33333*#500-0.33333*#505]
#101=[#506+0.33333*#501-0.33333*#506]
#100=[#102+0.18182*#101-0.18182*#102]
N4880G1X7.50000Y43.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#505+0*#505-0*#505]
#101=[#506+0*#506-0*#506]
#100=[#102+0.18182*#101-0.18182*#102]
N4880G1X7.50000Y48.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#510+0.66667*#505-0.66667*#510]
#101=[#511+0.66667*#506-0.66667*#511]
#100=[#102+0.18182*#101-0.18182*#102]
N4880G1X7.50000Y53.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#510+0.40000*#505-0.40000*#510]
#101=[#511+0.40000*#506-0.40000*#511]
#100=[#102+0.18182*#101-0.18182*#102]
N4880G1X7.500Y57.000Z[#100+-0.100]
#102=[#510+0.20000*#505-0.20000*#510]
#101=[#511+0.20000*#506-0.20000*#511]
#100=[#102+0.40000*#101-0.40000*#102]
N4890G3X10.500Y60.000Z[#100+-0.100]I0.000J3.000
#102=[#510+0.20000*#505-0.20000*#510]
#101=[#511+0.20000*#506-0.20000*#511]
#100=[#102+0.76364*#101-0.76364*#102]
N4900G1X15.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#511+0.20000*#506-0.20000*#511]
#101=[#512+0.20000*#507-0.20000*#512]
#100=[#102+0.12727*#101-0.12727*#102]
N4900G1X20.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#511+0.20000*#506-0.20000*#511]
#101=[#512+0.20000*#507-0.20000*#512]
#100=[#102+0.49091*#101-0.49091*#102]
N4900G1X25.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#511+0.20000*#506-0.20000*#511]
#101=[#512+0.20000*#507-0.20000*#512]
#100=[#102+0.85455*#101-0.85455*#102]
N4900G1X30.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#512+0.20000*#507-0.20000*#512]
#101=[#513+0.20000*#508-0.20000*#513]
#100=[#102+0.21818*#101-0.21818*#102]
N4900G1X35.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#512+0.20000*#507-0.20000*#512]
#101=[#513+0.20000*#508-0.20000*#513]
#100=[#102+0.58182*#101-0.58182*#102]
N4900G1X40.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#512+0.20000*#507-0.20000*#512]
#101=[#513+0.20000*#508-0.20000*#513]
#100=[#102+0.94545*#101-0.94545*#102]
N4900G1X45.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#513+0.20000*#508-0.20000*#513]
#101=[#514+0.20000*#509-0.20000*#514]
#100=[#102+0.30909*#101-0.30909*#102]
N4900G1X50.50000Y60.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#513+0.20000*#508-0.20000*#513]
#101=[#514+0.20000*#509-0.20000*#514]
#100=[#102+0.60000*#101-0.60000*#102]
N4900G1X54.500Y60.000Z[#100+-0.100]
#102=[#513+0.40000*#508-0.40000*#513]
#101=[#514+0.40000*#509-0.40000*#514]
#100=[#102+0.81818*#101-0.81818*#102]
N4910G3X57.500Y57.000Z[#100+-0.100]I3.000J0.000
#102=[#513+0.73333*#508-0.73333*#513]
#101=[#514+0.73333*#509-0.73333*#514]
#100=[#102+0.81818*#101-0.81818*#102]
N4920G1X57.50000Y52.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#508+0.06667*#503-0.06667*#508]
#101=[#509+0.06667*#504-0.06667*#509]
#100=[#102+0.81818*#101-0.81818*#102]
N4920G1X57.50000Y47.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#508+0.40000*#503-0.40000*#508]
#101=[#509+0.40000*#504-0.40000*#509]
#100=[#102+0.81818*#101-0.81818*#102]
N4920G1X57.50000Y42.00000Z[#100+-0.100] ;segmented line. Max segment length set to 5
#102=[#508+0.66667*#503-0.66667*#508]
#101=[#509+0.66667*#504-0.66667*#509]
#100=[#102+0.81818*#101-0.81818*#102]
N4920G1X57.500Y38.000Z[#100+-0.100]
#102=[#508+0.86667*#503-0.86667*#508]
#101=[#509+0.86667*#504-0.86667*#509]
#100=[#102+0.60000*#101-0.60000*#102]
N4930G3X54.500Y35.000Z[#100+-0.100]I0.000J-3.000
N4940G00X54.500Y35.000Z2.000
N4950G00Z20.320
N4960G00X0.000Y0.000
N4970M09
N4980M30
(removed % symbol)