Guest User

Seagate Backup Plus SMART

a guest
Aug 6th, 2017
104
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.93 KB | None | 0 0
  1. $ sudo smartctl -d sat /dev/sdb -a
  2. smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.9.35-v7+] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.14 (AF)
  7. Device Model: ST2000DM001-1ER164
  8. Serial Number: W4Z01SXE
  9. LU WWN Device Id: 5 000c50 073d62a94
  10. Firmware Version: CC41
  11. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  18. Local Time is: Sun Aug 6 22:43:22 2017 CDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24. See vendor-specific Attribute list for marginal Attributes.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 105) seconds.
  35. Offline data collection
  36. capabilities: (0x73) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. No Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 1) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 235) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 2) minutes.
  55. SCT capabilities: (0x1085) SCT Status supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 083 081 006 Pre-fail Always - 214351587
  61. 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 635
  63. 5 Reallocated_Sector_Ct 0x0033 071 071 010 Pre-fail Always - 35320
  64. 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16812488
  65. 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23578
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 246
  68. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  69. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 12710
  71. 188 Command_Timeout 0x0032 098 097 000 Old_age Always - 25 31 33
  72. 189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3
  73. 190 Airflow_Temperature_Cel 0x0022 057 041 045 Old_age Always In_the_past 43 (Min/Max 35/47 #456)
  74. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  75. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 30
  76. 193 Load_Cycle_Count 0x0032 077 077 000 Old_age Always - 47353
  77. 194 Temperature_Celsius 0x0022 043 059 000 Old_age Always - 43 (0 20 0 0 0)
  78. 197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 32888
  79. 198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 32888
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 13743h+39m+11.463s
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10296203187
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 223407259006
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 12708 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 12708 occurred at disk power-on lifetime: 23555 hours (981 days + 11 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. 25 da 80 ff ff ff 4f 00 04:03:38.780 READ DMA EXT
  113. 25 da 80 ff ff ff 4f 00 04:03:35.170 READ DMA EXT
  114. 25 da 80 ff ff ff 4f 00 04:03:31.553 READ DMA EXT
  115. 25 da 80 ff ff ff 4f 00 04:03:27.944 READ DMA EXT
  116. 25 da 80 ff ff ff 4f 00 04:03:24.328 READ DMA EXT
  117.  
  118. Error 12707 occurred at disk power-on lifetime: 23555 hours (981 days + 11 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 25 da 80 ff ff ff 4f 00 04:03:35.170 READ DMA EXT
  130. 25 da 80 ff ff ff 4f 00 04:03:31.553 READ DMA EXT
  131. 25 da 80 ff ff ff 4f 00 04:03:27.944 READ DMA EXT
  132. 25 da 80 ff ff ff 4f 00 04:03:24.328 READ DMA EXT
  133. 25 da 80 ff ff ff 4f 00 04:03:20.693 READ DMA EXT
  134.  
  135. Error 12706 occurred at disk power-on lifetime: 23555 hours (981 days + 11 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 25 da 80 ff ff ff 4f 00 04:03:31.553 READ DMA EXT
  147. 25 da 80 ff ff ff 4f 00 04:03:27.944 READ DMA EXT
  148. 25 da 80 ff ff ff 4f 00 04:03:24.328 READ DMA EXT
  149. 25 da 80 ff ff ff 4f 00 04:03:20.693 READ DMA EXT
  150. 25 da 80 ff ff ff 4f 00 04:03:17.069 READ DMA EXT
  151.  
  152. Error 12705 occurred at disk power-on lifetime: 23555 hours (981 days + 11 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. 25 da 80 ff ff ff 4f 00 04:03:27.944 READ DMA EXT
  164. 25 da 80 ff ff ff 4f 00 04:03:24.328 READ DMA EXT
  165. 25 da 80 ff ff ff 4f 00 04:03:20.693 READ DMA EXT
  166. 25 da 80 ff ff ff 4f 00 04:03:17.069 READ DMA EXT
  167. 25 da 80 ff ff ff 4f 00 04:03:13.487 READ DMA EXT
  168.  
  169. Error 12704 occurred at disk power-on lifetime: 23555 hours (981 days + 11 hours)
  170. When the command that caused the error occurred, the device was active or idle.
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. 25 da 80 ff ff ff 4f 00 04:03:24.328 READ DMA EXT
  181. 25 da 80 ff ff ff 4f 00 04:03:20.693 READ DMA EXT
  182. 25 da 80 ff ff ff 4f 00 04:03:17.069 READ DMA EXT
  183. 25 da 80 ff ff ff 4f 00 04:03:13.487 READ DMA EXT
  184. 25 da 80 ff ff ff 4f 00 04:03:09.882 READ DMA EXT
  185.  
  186. SMART Self-test log structure revision number 1
  187. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  188.  
  189. SMART Selective self-test log data structure revision number 1
  190. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  191. 1 0 0 Not_testing
  192. 2 0 0 Not_testing
  193. 3 0 0 Not_testing
  194. 4 0 0 Not_testing
  195. 5 0 0 Not_testing
  196. Selective self-test flags (0x0):
  197. After scanning selected spans, do NOT read-scan remainder of disk.
  198. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment