armoon

XU4 - relocation

Jun 11th, 2020
142
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.99 KB | None | 0 0
  1. U-Boot 2020.04-2 (Apr 14 2020 - 05:49:27 +0000) Arch Linux ARM
  2.  
  3. CPU: Exynos5422 @ 800 MHz
  4. DRAM: 2 GiB
  5. MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
  6. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  7.  
  8. In: serial
  9. Out: serial
  10. Err: serial
  11. Model: Odroid XU3/XU4/HC1/HC2 based on Exynos5422
  12. Type: hc1
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Boot device: MMC(2)
  17. Net: No ethernet found.
  18. Hit any key to stop autoboot: 0
  19. switch to partitions #0, OK
  20. mmc2 is current device
  21. Scanning mmc 2:1...
  22. Found U-Boot script /boot/boot.scr
  23. 2054 bytes read in 24 ms (83 KiB/s)
  24. ## Executing script at 50000000
  25. 7207856 bytes read in 471 ms (14.6 MiB/s)
  26. 81748 bytes read in 167 ms (477.5 KiB/s)
  27. 7536250 bytes read in 493 ms (14.6 MiB/s)
  28. Kernel image @ 0x42000000 [ 0x000000 - 0x6dfbb0 ]
  29. ## Flattened Device Tree blob at 43000000
  30. Booting using the fdt blob at 0x43000000
  31. Loading Ramdisk to 4f8d0000, end 4ffffe7a ... OK
  32. Loading Device Tree to 4f8b9000, end 4f8cff53 ... OK
  33.  
  34. Starting kernel ...
  35.  
  36. [ 0.000000] Booting Linux on physical CPU 0x100
  37. [ 0.000000] Linux version 5.7.1-1-ARCH (builduser@leming) (gcc version 9.3.0 (GCC), GNU ld (GNU Binutils) 2.34) #1 SMP PREEMPT Tue Jun 9 01:24:41 UTC 2020
  38. [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  39. [ 0.000000] CPU: div instructions available: patching division code
  40. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  41. [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid HC1
  42. [ 0.000000] Memory policy: Data cache writealloc
  43. [ 0.000000] cma: Reserved 64 MiB at 0xba800000
  44. [ 0.000000] Samsung CPU ID: 0xe5422001
  45. [ 0.000000] Running under secure firmware.
  46. [ 0.000000] percpu: Embedded 16 pages/cpu s34764 r8192 d22580 u65536
  47. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928
  48. [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=PARTUUID=6015a5e1-01 rw rootwait smsc95xx.macaddr= audit=0
  49. [ 0.000000] audit: disabled (until reboot)
  50. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  51. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  52. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  53. [ 0.000000] Memory: 1956324K/2074624K available (14336K kernel code, 1049K rwdata, 6156K rodata, 2048K init, 880K bss, 52764K reserved, 65536K cma-reserved, 1222656K highmem)
  54. [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x28/0x38c with crng_init=0
  55. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  56. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  57. [ 0.000000] Tasks RCU enabled.
  58. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  59. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  60. [ 0.000000] GIC: Using split EOI/Deactivate mode
  61. [ 0.000000] Switching to timer-based delay loop, resolution 41ns
  62. [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  63. [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  64. [ 0.000034] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
  65. [ 0.005019] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  66. [ 0.005040] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [ 0.005061] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [ 0.005075] Ignoring duplicate/late registration of read_current_timer delay
  69. [ 0.007447] Console: colour dummy device 80x30
  70. [ 0.008161] printk: console [tty1] enabled
  71. [ 0.008243] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  72. [ 0.008289] pid_max: default: 32768 minimum: 301
  73. [ 0.008579] LSM: Security Framework initializing
  74. [ 0.008826] Smack: Initializing.
  75. [ 0.008850] Smack: IPv6 port labeling enabled.
  76. [ 0.009074] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  77. [ 0.009123] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  78. [ 0.010515] CPU: Testing write buffer coherency: ok
  79. [ 0.011112] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  80. [ 0.012363] Setting up static identity map for 0x40300000 - 0x403000ac
  81. [ 0.012776] ARM CCI driver probed
  82. [ 0.013046] Exynos MCPM support installed
  83. [ 0.015935] rcu: Hierarchical SRCU implementation.
  84. [ 0.016446] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
  85. [ 0.019500] smp: Bringing up secondary CPUs ...
  86. [ 0.020761] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  87. [ 0.022075] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  88. [ 0.023337] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  89. [ 0.024673] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  90. [ 0.024684] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  91. [ 0.026082] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  92. [ 0.026092] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  93. [ 0.027427] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  94. [ 0.027436] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  95. [ 0.028813] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  96. [ 0.028823] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  97. [ 0.029088] smp: Brought up 1 node, 8 CPUs
  98. [ 0.029139] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  99. [ 0.029165] CPU: All CPU(s) started in HYP mode.
  100. [ 0.029186] CPU: Virtualization extensions available.
  101. [ 0.030805] devtmpfs: initialized
  102. [ 0.050062] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  103. [ 0.050773] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  104. [ 0.050815] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  105. [ 0.052291] xor: measuring software checksum speed
  106. [ 0.091954] arm4regs : 1517.000 MB/sec
  107. [ 0.131954] 8regs : 1237.000 MB/sec
  108. [ 0.171957] 32regs : 1230.000 MB/sec
  109. [ 0.211954] neon : 2154.000 MB/sec
  110. [ 0.211975] xor: using function: neon (2154.000 MB/sec)
  111. [ 0.212039] pinctrl core: initialized pinctrl subsystem
  112. [ 0.214360] thermal_sys: Registered thermal governor 'fair_share'
  113. [ 0.214365] thermal_sys: Registered thermal governor 'bang_bang'
  114. [ 0.214392] thermal_sys: Registered thermal governor 'step_wise'
  115. [ 0.214414] thermal_sys: Registered thermal governor 'user_space'
  116. [ 0.217286] NET: Registered protocol family 16
  117. [ 0.220506] DMA: preallocated 256 KiB pool for atomic coherent allocations
  118. [ 0.224543] cpuidle: using governor menu
  119. [ 0.224903] No ATAGs?
  120. [ 0.225265] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  121. [ 0.225293] hw-breakpoint: maximum watchpoint size is 8 bytes.
  122. [ 0.226880] Serial: AMBA PL011 UART driver
  123. [ 0.279345] random: fast init done
  124. [ 0.319082] EXYNOS5420 PMU initialized
  125. [ 0.475973] raid6: neonx8 gen() 1885 MB/s
  126. [ 0.543966] raid6: neonx8 xor() 1090 MB/s
  127. [ 0.611971] raid6: neonx4 gen() 1995 MB/s
  128. [ 0.679971] raid6: neonx4 xor() 1295 MB/s
  129. [ 0.747970] raid6: neonx2 gen() 1922 MB/s
  130. [ 0.815972] raid6: neonx2 xor() 1399 MB/s
  131. [ 0.884003] raid6: neonx1 gen() 1471 MB/s
  132. [ 0.951976] raid6: neonx1 xor() 1218 MB/s
  133. [ 1.019976] raid6: int32x8 gen() 494 MB/s
  134. [ 1.087981] raid6: int32x8 xor() 268 MB/s
  135. [ 1.155978] raid6: int32x4 gen() 489 MB/s
  136. [ 1.224004] raid6: int32x4 xor() 275 MB/s
  137. [ 1.292022] raid6: int32x2 gen() 468 MB/s
  138. [ 1.359982] raid6: int32x2 xor() 249 MB/s
  139. [ 1.428017] raid6: int32x1 gen() 430 MB/s
  140. [ 1.496021] raid6: int32x1 xor() 194 MB/s
  141. [ 1.496042] raid6: using algorithm neonx4 gen() 1995 MB/s
  142. [ 1.496061] raid6: .... xor() 1295 MB/s, rmw enabled
  143. [ 1.496081] raid6: using neon recovery algorithm
  144. [ 1.507294] iommu: Default domain type: Translated
  145. [ 1.509054] vgaarb: loaded
  146. [ 1.509838] SCSI subsystem initialized
  147. [ 1.510424] usbcore: registered new interface driver usbfs
  148. [ 1.510493] usbcore: registered new interface driver hub
  149. [ 1.510650] usbcore: registered new device driver usb
  150. [ 1.513403] mc: Linux media interface: v0.10
  151. [ 1.513454] videodev: Linux video capture interface: v2.00
  152. [ 1.513560] pps_core: LinuxPPS API ver. 1 registered
  153. [ 1.513581] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  154. [ 1.513621] PTP clock support registered
  155. [ 1.513664] EDAC MC: Ver: 3.0.0
  156. [ 1.515871] Advanced Linux Sound Architecture Driver Initialized.
  157. [ 1.516453] NetLabel: Initializing
  158. [ 1.516474] NetLabel: domain hash size = 128
  159. [ 1.516493] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  160. [ 1.516575] NetLabel: unlabeled traffic allowed by default
  161. [ 1.517073] clocksource: Switched to clocksource mct-frc
  162. [ 1.517381] VFS: Disk quotas dquot_6.6.0
  163. [ 1.517477] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  164. [ 1.531396] NET: Registered protocol family 2
  165. [ 1.532143] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  166. [ 1.532198] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  167. [ 1.532293] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  168. [ 1.532462] TCP: Hash tables configured (established 8192 bind 8192)
  169. [ 1.532919] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  170. [ 1.532979] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  171. [ 1.533297] NET: Registered protocol family 1
  172. [ 1.534088] RPC: Registered named UNIX socket transport module.
  173. [ 1.534113] RPC: Registered udp transport module.
  174. [ 1.534133] RPC: Registered tcp transport module.
  175. [ 1.534152] RPC: Registered tcp NFSv4.1 backchannel transport module.
  176. [ 1.534178] NET: Registered protocol family 44
  177. [ 1.534204] PCI: CLS 0 bytes, default 64
  178. [ 1.534798] Trying to unpack rootfs image as initramfs...
  179. [ 2.003807] Freeing initrd memory: 7360K
  180. [ 2.005705] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  181. [ 2.006625] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  182. [ 2.027639] Initialise system trusted keyrings
  183. [ 2.027866] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  184. [ 2.034532] zbud: loaded
  185. [ 2.036738] NFS: Registering the id_resolver key type
  186. [ 2.036779] Key type id_resolver registered
  187. [ 2.036801] Key type id_legacy registered
  188. [ 2.036837] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  189. [ 2.078199] Key type asymmetric registered
  190. [ 2.078225] Asymmetric key parser 'x509' registered
  191. [ 2.078295] bounce: pool size: 64 pages
  192. [ 2.078354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  193. [ 2.078616] io scheduler mq-deadline registered
  194. [ 2.078639] io scheduler kyber registered
  195. [ 2.078876] io scheduler bfq registered
  196. [ 2.090957] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator
  197. [ 2.092003] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator
  198. [ 2.092122] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator
  199. [ 2.092539] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator
  200. [ 2.092657] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator
  201. [ 2.127448] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
  202. [ 2.127482] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  203. [ 2.130069] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
  204. [ 2.130100] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  205. [ 2.130987] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
  206. [ 2.131017] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  207. [ 2.144637] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
  208. [ 2.149747] Serial: AMBA driver
  209. [ 2.149965] samsung-uart 12c00000.serial: IRQ index 1 not found
  210. [ 2.150046] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 62, base_baud = 0) is a S3C6400/10
  211. [ 2.150633] samsung-uart 12c10000.serial: IRQ index 1 not found
  212. [ 2.150697] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 63, base_baud = 0) is a S3C6400/10
  213. [ 2.151260] samsung-uart 12c20000.serial: IRQ index 1 not found
  214. [ 2.151324] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 64, base_baud = 0) is a S3C6400/10
  215. [ 3.191123] printk: console [ttySAC2] enabled
  216. [ 3.195980] samsung-uart 12c30000.serial: IRQ index 1 not found
  217. [ 3.201387] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 65, base_baud = 0) is a S3C6400/10
  218. [ 3.214563] sdhci: Secure Digital Host Controller Interface driver
  219. [ 3.219305] sdhci: Copyright(c) Pierre Ossman
  220. [ 3.225733] Synopsys Designware Multimedia Card Interface Driver
  221. [ 3.231403] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
  222. [ 3.237195] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
  223. [ 3.243566] dwmmc_exynos 12220000.mmc: Version ID is 250a
  224. [ 3.248990] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
  225. [ 3.259483] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
  226. [ 3.260053] usbcore: registered new interface driver vub300
  227. [ 3.270635] usbcore: registered new interface driver ushc
  228. [ 3.277416] sdhci-pltfm: SDHCI platform and OF driver helper
  229. [ 3.310450] loop: module loaded
  230. [ 3.314400] Loading iSCSI transport class v2.0-870.
  231. [ 3.318394] iscsi: registered transport (tcp)
  232. [ 3.333245] libphy: Fixed MDIO Bus: probed
  233. [ 3.344002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  234. [ 3.349089] ehci-pci: EHCI PCI platform driver
  235. [ 3.353536] ehci-platform: EHCI generic platform driver
  236. [ 3.359098] ehci-mxc: Freescale On-Chip EHCI Host driver
  237. [ 3.364157] ehci-omap: OMAP-EHCI Host Controller driver
  238. [ 3.369480] ehci-orion: EHCI orion driver
  239. [ 3.373502] ehci-exynos: EHCI Exynos driver
  240. [ 3.377736] exynos-ehci 12110000.usb: EHCI Host Controller
  241. [ 3.382816] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
  242. [ 3.390680] exynos-ehci 12110000.usb: irq 81, io mem 0x12110000
  243. [ 3.409133] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  244. [ 3.413958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  245. [ 3.421945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  246. [ 3.429135] usb usb1: Product: EHCI Host Controller
  247. [ 3.433978] usb usb1: Manufacturer: Linux 5.7.1-1-ARCH ehci_hcd
  248. [ 3.439871] usb usb1: SerialNumber: 12110000.usb
  249. [ 3.445218] hub 1-0:1.0: USB hub found
  250. [ 3.448201] hub 1-0:1.0: 3 ports detected
  251. [ 3.453191] tegra-ehci: Tegra EHCI driver
  252. [ 3.456481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  253. [ 3.462334] ohci-pci: OHCI PCI platform driver
  254. [ 3.466776] ohci-platform: OHCI generic platform driver
  255. [ 3.472298] ohci-exynos: OHCI Exynos driver
  256. [ 3.476323] exynos-ohci 12120000.usb: USB Host Controller
  257. [ 3.481488] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
  258. [ 3.489227] exynos-ohci 12120000.usb: irq 81, io mem 0x12120000
  259. [ 3.558618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07
  260. [ 3.565445] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  261. [ 3.572634] usb usb2: Product: USB Host Controller
  262. [ 3.577390] usb usb2: Manufacturer: Linux 5.7.1-1-ARCH ohci_hcd
  263. [ 3.583283] usb usb2: SerialNumber: 12120000.usb
  264. [ 3.588499] hub 2-0:1.0: USB hub found
  265. [ 3.591647] hub 2-0:1.0: 3 ports detected
  266. [ 3.597527] usbcore: registered new interface driver uas
  267. [ 3.601475] usbcore: registered new interface driver usb-storage
  268. [ 3.607405] usbcore: registered new interface driver ums-cypress
  269. [ 3.613384] usbcore: registered new interface driver ums_eneub6250
  270. [ 3.619543] usbcore: registered new interface driver ums-freecom
  271. [ 3.625524] usbcore: registered new interface driver ums-isd200
  272. [ 3.631408] usbcore: registered new interface driver ums-usbat
  273. [ 3.650116] i2c /dev entries driver
  274. [ 3.686768] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
  275. [ 3.708013] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
  276. [ 3.791032] s5m-rtc s2mps14-rtc: registered as rtc0
  277. [ 3.796383] s5m-rtc s2mps14-rtc: setting system clock to 2020-06-11T04:59:00 UTC (1591851540)
  278. [ 3.804177] s2mps11-clk s2mps11-clk: DMA mask not set
  279. [ 3.826729] exynos-tmu 100a0000.tmu: More trip points than supported by this TMU.
  280. [ 3.832792] exynos-tmu 100a0000.tmu: 3 trip points should be configured in polling mode.
  281. [ 3.848973] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
  282. [ 3.857597] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 3 >= em_cap_state2
  283. [ 3.867548] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 4 >= em_cap_state3
  284. [ 3.877490] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 5 >= em_cap_state4
  285. [ 3.887441] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7
  286. [ 3.897395] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 10 >= em_cap_state9
  287. [ 3.907444] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 11 >= em_cap_state10
  288. [ 3.927210] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
  289. [ 3.935784] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
  290. [ 3.945742] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 3 >= em_cap_state2
  291. [ 3.955708] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 4 >= em_cap_state3
  292. [ 3.965672] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 5 >= em_cap_state4
  293. [ 3.975636] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 6 >= em_cap_state5
  294. [ 3.985603] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 8 >= em_cap_state7
  295. [ 3.995567] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 9 >= em_cap_state8
  296. [ 4.005532] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 10 >= em_cap_state9
  297. [ 4.015590] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 13 >= em_cap_state12
  298. [ 4.025752] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 15 >= em_cap_state14
  299. [ 4.035864] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 16 >= em_cap_state15
  300. [ 4.057952] ledtrig-cpu: registered to indicate activity on CPUs
  301. [ 4.063255] hid: raw HID events driver (C) Jiri Kosina
  302. [ 4.067806] usbcore: registered new interface driver usbhid
  303. [ 4.073158] usbhid: USB HID core driver
  304. [ 4.082650] NET: Registered protocol family 10
  305. [ 4.126807] Segment Routing with IPv6
  306. [ 4.129026] mip6: Mobile IPv6
  307. [ 4.131961] NET: Registered protocol family 17
  308. [ 4.136526] Key type dns_resolver registered
  309. [ 4.141090] ThumbEE CPU extension supported.
  310. [ 4.144852] Registering SWP/SWPB emulation handler
  311. [ 4.149850] registered taskstats version 1
  312. [ 4.153709] Loading compiled-in X.509 certificates
  313. [ 4.158523] zswap: loaded using pool lzo/zbud
  314. [ 4.163561] Key type ._fscrypt registered
  315. [ 4.166798] Key type .fscrypt registered
  316. [ 4.170688] Key type fscrypt-provisioning registered
  317. [ 4.177213] Btrfs loaded, crc32c=crc32c-generic
  318. [ 4.220954] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
  319. [ 4.225989] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
  320. [ 4.233197] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
  321. [ 4.239398] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
  322. [ 4.245616] dwmmc_exynos 12220000.mmc: Version ID is 250a
  323. [ 4.250991] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 83,64 bit host data width,64 deep fifo
  324. [ 4.275934] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  325. [ 4.299541] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  326. [ 4.303597] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
  327. [ 4.311396] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
  328. [ 4.320653] xhci-hcd xhci-hcd.7.auto: irq 156, io mem 0x12000000
  329. [ 4.326875] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  330. [ 4.334777] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  331. [ 4.341966] usb usb3: Product: xHCI Host Controller
  332. [ 4.346815] usb usb3: Manufacturer: Linux 5.7.1-1-ARCH xhci-hcd
  333. [ 4.352713] usb usb3: SerialNumber: xhci-hcd.7.auto
  334. [ 4.357981] hub 3-0:1.0: USB hub found
  335. [ 4.361307] hub 3-0:1.0: 1 port detected
  336. [ 4.365400] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  337. [ 4.370655] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
  338. [ 4.378280] xhci-hcd xhci-hcd.7.auto: Host supports USB 3.0 SuperSpeed
  339. [ 4.384829] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  340. [ 4.392924] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
  341. [ 4.401089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  342. [ 4.408238] usb usb4: Product: xHCI Host Controller
  343. [ 4.413105] usb usb4: Manufacturer: Linux 5.7.1-1-ARCH xhci-hcd
  344. [ 4.419002] usb usb4: SerialNumber: xhci-hcd.7.auto
  345. [ 4.424245] hub 4-0:1.0: USB hub found
  346. [ 4.427581] hub 4-0:1.0: 1 port detected
  347. [ 4.434534] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  348. [ 4.438590] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
  349. [ 4.446386] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
  350. [ 4.455661] xhci-hcd xhci-hcd.8.auto: irq 157, io mem 0x12400000
  351. [ 4.461863] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  352. [ 4.469780] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  353. [ 4.476964] usb usb5: Product: xHCI Host Controller
  354. [ 4.481826] usb usb5: Manufacturer: Linux 5.7.1-1-ARCH xhci-hcd
  355. [ 4.487705] usb usb5: SerialNumber: xhci-hcd.8.auto
  356. [ 4.492909] hub 5-0:1.0: USB hub found
  357. [ 4.496288] hub 5-0:1.0: 1 port detected
  358. [ 4.500392] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  359. [ 4.505680] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 6
  360. [ 4.513283] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
  361. [ 4.519831] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  362. [ 4.527927] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
  363. [ 4.536073] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  364. [ 4.543253] usb usb6: Product: xHCI Host Controller
  365. [ 4.548111] usb usb6: Manufacturer: Linux 5.7.1-1-ARCH xhci-hcd
  366. [ 4.553996] usb usb6: SerialNumber: xhci-hcd.8.auto
  367. [ 4.559233] hub 6-0:1.0: USB hub found
  368. [ 4.562600] hub 6-0:1.0: 1 port detected
  369. [ 4.568166] s3c-rtc 101e0000.rtc: registered as rtc1
  370. [ 4.611648] ALSA device list:
  371. [ 4.611688] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  372. [ 4.613165] No soundcards found.
  373. [ 4.627768] Freeing unused kernel memory: 2048K
  374. [ 4.631340] Run /init as init process
  375. :: running early hook [udev]
  376. [ 4.728238] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  377. [ 4.734001] mmcblk0: mmc0:aaaa JULIE 14.8 GiB
  378. Starting version 245.6-4-arch
  379. :: running hook [udev]
  380. :[ 4.743734] mmcblk0: p1
  381. : Triggering uevents...
  382. [ 5.013457] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  383. [ 5.038630] usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 1.05
  384. [ 5.045385] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  385. [ 5.052464] usb 4-1: Product: USB to SATA bridge
  386. [ 5.057090] usb 4-1: Manufacturer: JMicron
  387. [ 5.061127] usb 4-1: SerialNumber: DB00000000013B
  388. [ 5.076725] scsi host0: uas
  389. [ 5.079545] scsi 0:0:0:0: Direct-Access JMicron 0105 PQ: 0 ANSI: 6
  390. [ 5.087797] sd 0:0:0:0: Attached scsi generic sg0 type 0
  391. [ 5.092591] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  392. [ 5.099151] sd 0:0:0:0: [sda] 4096-byte physical blocks
  393. [ 5.104570] sd 0:0:0:0: [sda] Write Protect is off
  394. [ 5.109542] sd 0:0:0:0: [sda] Disabling FUA
  395. [ 5.113244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  396. [ 5.122676] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
  397. [ 5.171580] sda: sda1
  398. [ 5.176026] sd 0:0:0:0: [sda] Attached SCSI disk
  399. [ 5.346871] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
  400. [ 5.352080] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
  401. [ 5.385148] dma-pl330 3880000.adma: PM domain MAU will not be powered off
  402. [ 5.601264] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  403. [ 5.626548] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
  404. [ 5.633286] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
  405. [ 5.640377] usb 6-1: Product: USB 10/100/1000 LAN
  406. [ 5.645080] usb 6-1: Manufacturer: Realtek
  407. [ 5.649123] usb 6-1: SerialNumber: 000001000000
  408. :: performing fsck on '/dev/mmcblk0p1'
  409. rootfs: clean, 88529/972944 files, 1526451/3888512 blocks
  410. :: mounting '/dev/mmcblk0p1' on real root
  411. [ 5.840316] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  412. :: running cleanup hook [udev]
  413. [ 6.227008] x_tables: section 4 reloc 2 sym 'mutex_lock': relocation 28 out of range (0xbf0000bc -> 0xc101c154)
  414. [ 6.277233] systemd[1]: systemd 245.6-4-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  415. [ 6.298504] systemd[1]: Detected architecture arm.
  416.  
  417. Welcome to Arch Linux ARM!
  418.  
  419. [ 6.352696] systemd[1]: Set hostname to <archl-hc1d>.
  420. [ 6.751250] random: systemd: uninitialized urandom read (16 bytes read)
  421. [ 6.760959] systemd[1]: Created slice system-getty.slice.
  422. [ OK ] Created slice system-getty.slice.
  423. [ 6.781174] random: systemd: uninitialized urandom read (16 bytes read)
  424. [ 6.787158] systemd[1]: Created slice system-modprobe.slice.
  425. [ OK ] Created slice system-modprobe.slice.
  426. [ 6.809152] random: systemd: uninitialized urandom read (16 bytes read)
  427. [ 6.815114] systemd[1]: Created slice system-serial\x2dgetty.slice.
  428. [ OK ] Created slice system-serial\x2dgetty.slice.
  429. [ 6.838127] systemd[1]: Created slice User and Session Slice.
  430. [ OK ] Created slice User and Session Slice.
  431. [ 6.861385] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  432. [ OK ] Started Dispatch Password ?ts to Console Directory Watch.
  433. [ 6.885338] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  434. [ OK ] Started Forward Password R?uests to Wall Directory Watch.
  435. [ 6.909715] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  436. [ OK ] Set up automount Arbitrary?s File System Automount Point.
  437. [ 6.937227] systemd[1]: Reached target Local Encrypted Volumes.
  438. [ OK ] Reached target Local Encrypted Volumes.
  439. [ 6.957204] systemd[1]: Reached target Paths.
  440. [ OK ] Reached target Paths.
  441. [ 6.973177] systemd[1]: Reached target Remote File Systems.
  442. [ OK ] Reached target Remote File Systems.
  443. [ 6.993160] systemd[1]: Reached target Slices.
  444. [ OK ] Reached target Slices.
  445. [ 7.013197] systemd[1]: Reached target Swap.
  446. [ OK ] Reached target Swap.
  447. [ 7.029419] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  448. [ OK ] Listening on Device-mapper event daemon FIFOs.
  449. [ 7.060664] systemd[1]: Listening on Process Core Dump Socket.
  450. [ OK ] Listening on Process Core Dump Socket.
  451. [ 7.081331] systemd[1]: Listening on initctl Compatibility Named Pipe.
  452. [ OK ] Listening on initctl Compatibility Named Pipe.
  453. [ 7.119385] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  454. [ 7.126405] systemd[1]: Listening on Journal Socket (/dev/log).
  455. [ OK ] Listening on Journal Socket (/dev/log).
  456. [ 7.149523] systemd[1]: Listening on Journal Socket.
  457. [ OK ] Listening on Journal Socket.
  458. [ 7.169535] systemd[1]: Listening on Network Service Netlink Socket.
  459. [ OK ] Listening on Network Service Netlink Socket.
  460. [ 7.193473] systemd[1]: Listening on udev Control Socket.
  461. [ OK ] Listening on udev Control Socket.
  462. [ 7.213339] systemd[1]: Listening on udev Kernel Socket.
  463. [ OK ] Listening on udev Kernel Socket.
  464. [ 7.233437] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  465. [ 7.243369] systemd[1]: Mounting POSIX Message Queue File System...
  466. Mounting POSIX Message Queue File System...
  467. [ 7.268310] systemd[1]: Mounting Kernel Debug File System...
  468. Mounting Kernel Debug File System...
  469. [ 7.289377] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  470. [ 7.302820] systemd[1]: Mounting Temporary Directory (/tmp)...
  471. Mounting Temporary Directory (/tmp)...
  472. [ 7.328499] systemd[1]: Starting Create list of static device nodes for the current kernel...
  473. Starting Create list of st?odes for the current kernel...
  474. [ 7.357245] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
  475. [ 7.368194] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  476. [ 7.380207] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  477. [ 7.386942] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
  478. [ 7.398077] systemd[1]: Mounting Kernel Configuration File System...
  479. Mounting Kernel Configuration File System...
  480. [ 7.420501] systemd[1]: Starting Remount Root and Kernel File Systems...
  481. Starting Remount Root and Kernel File Systems...
  482. [ 7.444509] systemd[1]: Starting Apply Kernel Variables...
  483. Starting Apply Kernel Variables...
  484. [ 7.468401] systemd[1]: Starting udev Coldplug all Devices...
  485. Starting udev Coldplug all Devices...
  486. [ 7.484347] sch_fq_codel: section 4 reloc 34 sym '_raw_spin_lock_bh': relocation 28 out of range (0xbf000a44 -> 0xc101e9dc)
  487. [ 7.505107] systemd[1]: Mounted POSIX Message Queue File System.
  488. [ OK ] Mounted POSIX Message Queue File System.
  489. [ 7.526061] systemd[1]: Mounted Kernel Debug File System.
  490. [ OK ] Mounted Kernel Debug File System.
  491. [ 7.545839] systemd[1]: Mounted Temporary Directory (/tmp).
  492. [ OK ] Mounted Temporary Directory (/tmp).
  493. [ 7.567890] systemd[1]: Finished Create list of static device nodes for the current kernel.
  494. [ OK ] Finished Create list of st? nodes for the current kernel.
  495. [ 7.600881] systemd[1]: Mounted Kernel Configuration File System.
  496. [ OK ] Mounted Kernel Configuration File System.
  497. [ 7.623841] systemd[1]: Finished Remount Root and Kernel File Systems.
  498. [ OK ] Finished Remount Root and Kernel File Systems.
  499. [ 7.647963] systemd[1]: Finished Apply Kernel Variables.
  500. [ OK ] Finished Apply Kernel Variables.
  501. [ 7.672494] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
  502. [ 7.685939] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  503. [ 7.697003] systemd[1]: Starting Load/Save Random Seed...
  504. Starting Load/Save Random Seed...
  505. [ 7.717255] systemd[1]: Condition check resulted in Create System Users being skipped.
  506. [ 7.728192] systemd[1]: Starting Create Static Device Nodes in /dev...
  507. Starting Create Static Device Nodes in /dev...
  508. [ 7.810997] systemd[1]: Finished Create Static Device Nodes in /dev.
  509. [ OK ] Finished Create Static Device Nodes in /dev.
  510. [ 7.833799] systemd[1]: Reached target Local File Systems (Pre).
  511. [ OK ] Reached target Local File Systems (Pre).
  512. [ 7.857244] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
  513. [ 7.866733] systemd[1]: Reached target Local File Systems.
  514. [ OK ] Reached target Local File Systems.
  515. [ 7.893399] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
  516. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
  517. [ 7.917422] systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped.
  518. [ 7.932233] systemd[1]: Starting Journal Service...
  519. Starting Journal Service...
  520. [ 7.949292] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  521. [ 7.960848] systemd[1]: Starting udev Kernel Device Manager...
  522. Starting udev Kernel Device Manager...
  523. [ 7.984015] systemd[1]: Finished udev Coldplug all Devices.
  524. [ OK ] Finished udev Coldplug all Devices.
  525. [ 8.027627] random: crng init done
  526. [ 8.029569] random: 7 urandom warning(s) missed due to ratelimiting
  527. [ 8.047012] systemd[1]: Finished Load/Save Random Seed.
  528. [ OK ] Finished Load/Save Random Seed.
  529. [ 8.065915] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  530. [ 8.155976] systemd[1]: Started udev Kernel Device Manager.
  531. [ OK ] Started udev Kernel Device Manager.
  532. [ 8.177685] systemd[1]: Started Journal Service.
  533. [ OK ] Started Journal Service.
  534. Starting Flush Journal to Persistent Storage...
  535. Starting Network Service...
  536. [ 8.247464] systemd-journald[308]: Received client request to flush runtime journal.
  537. [ 8.452312] uio: section 4 reloc 33 sym 'mutex_lock': relocation 28 out of range (0xbf009210 -> 0xc101c154)
  538. [ OK ] Started Network Service.
  539. [ 8.529551] uio: section 4 reloc 33 sym 'mutex_lock': relocation 28 out of range (0xbf014210 -> 0xc101c154)
  540. [ 8.586703] uio_pdrv_genirq: section 4 reloc 3 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf00b068 -> 0xc101e370)
  541. [ 8.781228] exynos_rng: section 4 reloc 35 sym 'mutex_lock': relocation 28 out of range (0xbf000330 -> 0xc101c154)
  542. [ 8.781958] s5p_sss: section 4 reloc 139 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf0089f0 -> 0xc101e370)
  543. [ 8.782908] exynos5422_dmc: section 4 reloc 14 sym 'mutex_lock': relocation 28 out of range (0xbf013188 -> 0xc101c154)
  544. [ 8.869299] s3c2410_wdt: section 4 reloc 0 sym '_raw_spin_lock': relocation 28 out of range (0xbf01d010 -> 0xc101e98c)
  545. [ 8.918399] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
  546. [ 8.925439] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
  547. [ 8.931712] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
  548. [ 8.938313] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
  549. [ 8.946211] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
  550. [ 8.946981] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
  551. [ 8.954088] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
  552. [ 8.960724] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
  553. [ 9.038493] exynos_trng: section 4 reloc 7 sym 'usleep_range': relocation 28 out of range (0xbf0000c4 -> 0xc101d4e8)
  554. [ 9.038619] videobuf2_common: section 4 reloc 0 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf008130 -> 0xc101e370)
  555. [ OK ] Found device /dev/ttySAC2.
  556. [ 9.195245] videobuf2_v4l2: section 4 reloc 62 sym 'mutex_lock': relocation 29 out of range (0xbf0009b8 -> 0xc101c154)
  557. [ 9.242058] videobuf2_v4l2: section 4 reloc 62 sym 'mutex_lock': relocation 29 out of range (0xbf00c9b8 -> 0xc101c154)
  558. [ 9.331264] exynos_adc: section 4 reloc 45 sym 'mutex_lock': relocation 28 out of range (0xbf0155ac -> 0xc101c154)
  559. [ 9.386481] exynos-bus: new bus device registered: soc:bus_wcore ( 88700 KHz ~ 532000 KHz)
  560. [ 9.393935] exynos-bus: new bus device registered: soc:bus_noc ( 66600 KHz ~ 111000 KHz)
  561. [ 9.401876] exynos-bus: new bus device registered: soc:bus_fsys_apb (111000 KHz ~ 222000 KHz)
  562. [ 9.410442] exynos-bus: new bus device registered: soc:bus_fsys ( 75000 KHz ~ 200000 KHz)
  563. [ 9.418406] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 200000 KHz)
  564. [ 9.426992] exynos-bus: new bus device registered: soc:bus_mfc ( 83250 KHz ~ 333000 KHz)
  565. [ 9.434903] exynos-bus: new bus device registered: soc:bus_gen ( 88700 KHz ~ 266000 KHz)
  566. [ 9.442606] exynos-bus: new bus device registered: soc:bus_peri ( 66600 KHz ~ 66600 KHz)
  567. [ 9.451304] exynos-bus: new bus device registered: soc:bus_g2d ( 83250 KHz ~ 333000 KHz)
  568. [ 9.459045] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 66500 KHz ~ 266000 KHz)
  569. [ 9.467447] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
  570. [ 9.475678] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 83250 KHz ~ 166500 KHz)
  571. [ 9.480884] videobuf2_dma_contig: section 4 reloc 180 sym 'mutex_lock': relocation 28 out of range (0xbf00df90 -> 0xc101c154)
  572. [ 9.484109] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
  573. [ 9.484690] panfrost 11800000.gpu: clock rate = 400000000
  574. [ 9.485601] panfrost 11800000.gpu: mali-t620 id 0x620 major 0x0 minor 0x1 status 0x0
  575. [ 9.485614] panfrost 11800000.gpu: features: 00000000,10206400, issues: 00000000,21eee400
  576. [ 9.485625] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7
  577. [ 9.485633] panfrost 11800000.gpu: shader_present=0x3f l2_present=0x11
  578. [ 9.489986] [drm] Initialized panfrost 1.1.0 20180908 for 11800000.gpu on minor 0
  579. [ 9.550916] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
  580. [ 9.559208] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
  581. [ 9.568152] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 666000 KHz)
  582. [ 9.733586] exynos_gsc: section 4 reloc 0 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf00a014 -> 0xc101e370)
  583. [ 9.781808] exynos_gsc: section 4 reloc 0 sym '_raw_spin_lock_irqsave': relocation 28 out of range (0xbf014014 -> 0xc101e370)
  584. [ 9.834943] exynos-gsc 13e00000.video-scaler: Adding to iommu group 0
  585. [ 9.842035] exynos-gsc 13e10000.video-scaler: Adding to iommu group 1
  586. [ 10.093609] r8152: section 4 reloc 4 sym 'mutex_lock': relocation 28 out of range (0xbf00a130 -> 0xc101c154)
  587. [ 10.165659] usbcore: registered new interface driver cdc_ether
  588. [ OK ] Finished Flush Journal to Persistent Storage.
  589. Starting Create Volatile Files and Directories...
  590. [ OK ] Finished Create Volatile Files and Directories.
  591. Starting Network Name Resolution...
  592. Starting Network Time Synchronization...
  593. Starting Update UTMP about System Boot/Shutdown...
  594. [ OK ] Finished Update UTMP about System Boot/Shutdown.
  595. [ OK ] Started Network Time Synchronization.
  596. [ OK ] Reached target System Initialization.
  597. [ OK ] Started Daily Cleanup of Temporary Directories.
  598. [ OK ] Reached target System Time Set.
  599. [ OK ] Reached target System Time Synchronized.
  600. [ OK ] Started Daily verification of password and group files.
  601. [ OK ] Reached target Timers.
  602. [ OK ] Listening on D-Bus System Message Bus Socket.
  603. [ OK ] Reached target Sockets.
  604. [ OK ] Reached target Basic System.
  605. [ OK ] Started D-Bus System Message Bus.
  606. Starting Login Service...
  607. [ OK ] Started Network Name Resolution.
  608. [ OK ] Reached target Network.
  609. [ OK ] Reached target Host and Network Name Lookups.
  610. [ OK ] Started OpenSSH Daemon.
  611. Starting Permit User Sessions...
  612. [ OK ] Finished Permit User Sessions.
  613. [ OK ] Started Getty on tty1.
  614. [ OK ] Started Serial Getty on ttySAC2.
  615. [ OK ] Reached target Login Prompts.
  616. [ OK ] Started Login Service.
  617. [ OK ] Reached target Multi-User System.
  618. [ OK ] Reached target Graphical Interface.
  619.  
  620. Arch Linux 5.7.1-1-ARCH (ttySAC2)
  621.  
  622. archl-hc1d login: alarm
  623. Password:
  624. Last login: Thu Jun 11 04:45:27 on ttySAC2
  625. [alarm@archl-hc1d ~]$ ifconfig
  626. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  627. inet 127.0.0.1 netmask 255.0.0.0
  628. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  629. loop txqueuelen 1000 (Local Loopback)
  630. RX packets 0 bytes 0 (0.0 B)
  631. RX errors 0 dropped 0 overruns 0 frame 0
  632. TX packets 0 bytes 0 (0.0 B)
  633. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  634.  
  635. [alarm@archl-hc1d ~]$
Add Comment
Please, Sign In to add comment