API tools faq
paste
sporker

8.3-R warm boot, verbose boot, msix disabled

sporker
Aug 14th, 2012
53
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.98 KB | None | 0 0
raw download clone embed print report
  1. SMAP type=01 base=0000000000000000 len=0000000000092000
  2. SMAP type=02 base=0000000000092000 len=000000000000e000
  3. SMAP type=02 base=00000000000e6000 len=000000000001a000
  4. SMAP type=01 base=0000000000100000 len=00000000dfd80000
  5. SMAP type=03 base=00000000dfe80000 len=0000000000012000
  6. SMAP type=04 base=00000000dfe92000 len=000000000003e000
  7. SMAP type=02 base=00000000dfed0000 len=0000000000010000
  8. SMAP type=02 base=00000000dfeed000 len=0000000000013000
  9. SMAP type=02 base=00000000dff00000 len=0000000000100000
  10. SMAP type=02 base=00000000e0000000 len=0000000010000000
  11. SMAP type=02 base=00000000ffc00000 len=0000000000400000
  12. SMAP type=01 base=0000000100000000 len=000000071f000000
  13. Table 'FACP' at 0xdfe80290
  14. Table 'APIC' at 0xdfe80390
  15. APIC: Found table at 0xdfe80390
  16. APIC: Using the MADT enumerator.
  17. MADT: Found CPU APIC ID 16 ACPI ID 1: enabled
  18. SMP: Added CPU 16 (AP)
  19. MADT: Found CPU APIC ID 17 ACPI ID 2: enabled
  20. SMP: Added CPU 17 (AP)
  21. MADT: Found CPU APIC ID 18 ACPI ID 3: enabled
  22. SMP: Added CPU 18 (AP)
  23. MADT: Found CPU APIC ID 19 ACPI ID 4: enabled
  24. SMP: Added CPU 19 (AP)
  25. MADT: Found CPU APIC ID 20 ACPI ID 5: enabled
  26. SMP: Added CPU 20 (AP)
  27. MADT: Found CPU APIC ID 21 ACPI ID 6: enabled
  28. SMP: Added CPU 21 (AP)
  29. MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
  30. MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
  31. Copyright (c) 1992-2012 The FreeBSD Project.
  32. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  33. The Regents of the University of California. All rights reserved.
  34. FreeBSD is a registered trademark of The FreeBSD Foundation.
  35. FreeBSD 8.3-RELEASE #0: Mon Apr 9 21:23:18 UTC 2012
  36. [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
  37. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff833c7000.
  38. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff833c7230.
  39. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff833c7898.
  40. Preloaded elf obj module "/boot/kernel/geom_uzip.ko" at 0xffffffff833c7e88.
  41. Preloaded elf obj module "/boot/kernel/zlib.ko" at 0xffffffff833c8438.
  42. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff833c89a0.
  43. Preloaded elf obj module "/boot/kernel/tmpfs.ko" at 0xffffffff833c89f0.
  44. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff833c8fd8.
  45. Timecounter "i8254" frequency 1193182 Hz quality 0
  46. Calibrating TSC clock ... TSC clock: 3100011351 Hz
  47. CPU: AMD Opteron(tm) Processor 4234 (3100.01-MHz K8-class CPU)
  48. Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2
  49. Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  50. Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
  51. AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  52. AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  53. TSC: P-state invariant
  54. L1 2MB data TLB: 32 entries, fully associative
  55. L1 2MB instruction TLB: 24 entries, fully associative
  56. L1 4KB data TLB: 32 entries, fully associative
  57. L1 4KB instruction TLB: 48 entries, fully associative
  58. L1 data cache: 16 kbytes, 64 bytes/line, 1 lines/tag, 4-way associative
  59. L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
  60. L2 2MB data TLB: 1024 entries, 8-way associative
  61. L2 2MB instruction TLB: 0 entries, 8-way associative
  62. L2 4KB data TLB: 1024 entries, 8-way associative
  63. L2 4KB instruction TLB: 1024 entries, 8-way associative
  64. L2 unified cache: 2048 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
  65. real memory = 34359738368 (32768 MB)
  66. Physical memory chunk(s):
  67. 0x0000000000001000 - 0x000000000008dfff, 577536 bytes (141 pages)
  68. 0x00000000033f4000 - 0x00000000dfe7ffff, 3702046720 bytes (903820 pages)
  69. 0x0000000100000000 - 0x00000007e1f2ffff, 29560602624 bytes (7216944 pages)
  70. avail memory = 33058291712 (31526 MB)
  71. ACPI APIC Table: <121211 APIC1744>
  72. INTR: Adding local APIC 17 as a target
  73. INTR: Adding local APIC 18 as a target
  74. INTR: Adding local APIC 19 as a target
  75. INTR: Adding local APIC 20 as a target
  76. INTR: Adding local APIC 21 as a target
  77. FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
  78. FreeBSD/SMP: 1 package(s) x 6 core(s)
  79. cpu0 (BSP): APIC ID: 16
  80. cpu1 (AP): APIC ID: 17
  81. cpu2 (AP): APIC ID: 18
  82. cpu3 (AP): APIC ID: 19
  83. cpu4 (AP): APIC ID: 20
  84. cpu5 (AP): APIC ID: 21
  85. APIC: CPU 0 has ACPI ID 1
  86. APIC: CPU 1 has ACPI ID 2
  87. APIC: CPU 2 has ACPI ID 3
  88. APIC: CPU 3 has ACPI ID 4
  89. APIC: CPU 4 has ACPI ID 5
  90. APIC: CPU 5 has ACPI ID 6
  91. x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000
  92. x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000082000
  93. x86bios: EBDA 0x092000-0x09ffff at 0xffffff0000092000
  94. x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000
  95. ULE: setup cpu 0
  96. ULE: setup cpu 1
  97. ULE: setup cpu 2
  98. ULE: setup cpu 3
  99. ULE: setup cpu 4
  100. ULE: setup cpu 5
  101. ACPI: RSDP 0xfb330 00024 (v02 ACPIAM)
  102. ACPI: XSDT 0xdfe80100 00054 (v01 121211 XSDT1744 20111212 MSFT 00000097)
  103. ACPI: FACP 0xdfe80290 000F4 (v03 121211 FACP1744 20111212 MSFT 00000097)
  104. ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
  105. ACPI: DSDT 0xdfe80470 0461E (v01 8010_ 8010_001 00000001 INTL 20051117)
  106. ACPI: FACS 0xdfe92000 00040
  107. ACPI: APIC 0xdfe80390 0009E (v01 121211 APIC1744 20111212 MSFT 00000097)
  108. ACPI: MCFG 0xdfe80430 0003C (v01 121211 OEMMCFG 20111212 MSFT 00000097)
  109. ACPI: OEMB 0xdfe92040 000CB (v01 121211 OEMB1744 20111212 MSFT 00000097)
  110. ACPI: HPET 0xdfe8a470 00038 (v01 121211 OEMHPET 20111212 MSFT 00000097)
  111. ACPI: SSDT 0xdfe8a4b0 01158 (v01 A M I POWERNOW 00000001 AMD 00000001)
  112. MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
  113. ioapic0: Routing external 8259A's -> intpin 0
  114. MADT: Found IO APIC ID 1, Interrupt 24 at 0xfec20000
  115. MADT: Interrupt override: source 0, irq 2
  116. ioapic0: Routing IRQ 0 -> intpin 2
  117. MADT: Interrupt override: source 9, irq 9
  118. ioapic0: intpin 9 trigger: level
  119. ioapic0: intpin 9 polarity: low
  120. lapic: Routing NMI -> LINT1
  121. lapic: LINT1 trigger: edge
  122. lapic: LINT1 polarity: high
  123. ioapic0 <Version 2.1> irqs 0-23 on motherboard
  124. ioapic1 <Version 2.1> irqs 24-55 on motherboard
  125. cpu0 BSP:
  126. ID: 0x10000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  127. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  128. timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  129. wlan: <802.11 Link Layer>
  130. nfslock: pseudo-device
  131. kbd: new array size 4
  132. kbd1 at kbdmux0
  133. mem: <memory>
  134. io: <I/O>
  135. null: <null device, zero device>
  136. random: <entropy source, Software, Yarrow>
  137. hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
  138. acpi0: <121211 XSDT1744> on motherboard
  139. PCIe: Memory Mapped configuration base @ 0xe0000000
  140. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
  141. acpi0: [MPSAFE]
  142. acpi0: [ITHREAD]
  143. ACPI: Executed 2 blocks of module-level executable AML code
  144. acpi0: Power Button (fixed)
  145. acpi0: reservation of fec00000, 1000 (3) failed
  146. acpi0: reservation of fee00000, 1000 (3) failed
  147. acpi0: reservation of ffb80000, 80000 (3) failed
  148. acpi0: reservation of fec10000, 20 (3) failed
  149. acpi0: reservation of 0, a0000 (3) failed
  150. acpi0: reservation of 100000, dff00000 (3) failed
  151. ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 1/1 -> 10
  152. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  153. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  154. cpu0: <ACPI CPU> on acpi0
  155. cpu1: <ACPI CPU> on acpi0
  156. cpu2: <ACPI CPU> on acpi0
  157. cpu3: <ACPI CPU> on acpi0
  158. cpu4: <ACPI CPU> on acpi0
  159. cpu5: <ACPI CPU> on acpi0
  160. pci_link0: Index IRQ Rtd Ref IRQs
  161. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  162. Validation 0 11 N 0 4 7 10 11 12 14 15
  163. After Disable 0 255 N 0 4 7 10 11 12 14 15
  164. pci_link1: Index IRQ Rtd Ref IRQs
  165. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  166. Validation 0 10 N 0 4 7 10 11 12 14 15
  167. After Disable 0 255 N 0 4 7 10 11 12 14 15
  168. pci_link2: Index IRQ Rtd Ref IRQs
  169. Initial Probe 0 14 N 0 4 7 10 11 12 14 15
  170. Validation 0 14 N 0 4 7 10 11 12 14 15
  171. After Disable 0 255 N 0 4 7 10 11 12 14 15
  172. pci_link3: Index IRQ Rtd Ref IRQs
  173. Initial Probe 0 7 N 0 4 7 10 11 12 14 15
  174. Validation 0 7 N 0 4 7 10 11 12 14 15
  175. After Disable 0 255 N 0 4 7 10 11 12 14 15
  176. pci_link4: Index IRQ Rtd Ref IRQs
  177. Initial Probe 0 255 N 0 4 7 10 11 12 14 15
  178. Validation 0 255 N 0 4 7 10 11 12 14 15
  179. After Disable 0 255 N 0 4 7 10 11 12 14 15
  180. pci_link5: Index IRQ Rtd Ref IRQs
  181. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  182. Validation 0 11 N 0 4 7 10 11 12 14 15
  183. After Disable 0 255 N 0 4 7 10 11 12 14 15
  184. pci_link6: Index IRQ Rtd Ref IRQs
  185. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  186. Validation 0 10 N 0 4 7 10 11 12 14 15
  187. After Disable 0 255 N 0 4 7 10 11 12 14 15
  188. pci_link7: Index IRQ Rtd Ref IRQs
  189. Initial Probe 0 15 N 0 4 7 10 11 12 14 15
  190. Validation 0 15 N 0 4 7 10 11 12 14 15
  191. After Disable 0 255 N 0 4 7 10 11 12 14 15
  192. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  193. acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
  194. Timecounter "HPET" frequency 14318180 Hz quality 900
  195. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  196. pci0: <ACPI PCI bus> on pcib0
  197. pci0: domain=0, physical bus=0
  198. found-> vendor=0x1002, dev=0x5a12, revid=0x02
  199. domain=0, bus=0, slot=0, func=0
  200. class=06-00-00, hdrtype=0x00, mfdev=1
  201. cmdreg=0x0002, statreg=0x2010, cachelnsz=0 (dwords)
  202. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  203. MSI supports 4 messages
  204. found-> vendor=0x1002, dev=0x5a1c, revid=0x00
  205. domain=0, bus=0, slot=9, func=0
  206. class=06-04-00, hdrtype=0x01, mfdev=0
  207. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  208. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  209. intpin=a, irq=11
  210. powerspec 3 supports D0 D3 current D0
  211. MSI supports 1 message
  212. pcib0: matched entry for 0.9.INTA
  213. pcib0: slot 9 INTA hardwired to IRQ 53
  214. found-> vendor=0x1002, dev=0x5a1d, revid=0x00
  215. domain=0, bus=0, slot=10, func=0
  216. class=06-04-00, hdrtype=0x01, mfdev=0
  217. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  218. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  219. intpin=a, irq=10
  220. powerspec 3 supports D0 D3 current D0
  221. MSI supports 1 message
  222. pcib0: matched entry for 0.10.INTA
  223. pcib0: slot 10 INTA hardwired to IRQ 54
  224. found-> vendor=0x1002, dev=0x4391, revid=0x00
  225. domain=0, bus=0, slot=17, func=0
  226. class=01-06-01, hdrtype=0x00, mfdev=0
  227. cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
  228. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  229. intpin=a, irq=10
  230. powerspec 2 supports D0 D3 current D0
  231. map[10]: type I/O Port, range 32, base 0xb400, size 3, enabled
  232. map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
  233. map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
  234. map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
  235. map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
  236. map[24]: type Memory, range 32, base 0xfe9fa400, size 10, enabled
  237. pcib0: matched entry for 0.17.INTA
  238. pcib0: slot 17 INTA hardwired to IRQ 22
  239. found-> vendor=0x1002, dev=0x4397, revid=0x00
  240. domain=0, bus=0, slot=18, func=0
  241. class=0c-03-10, hdrtype=0x00, mfdev=1
  242. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  243. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  244. intpin=a, irq=11
  245. map[10]: type Memory, range 32, base 0xfe9f6000, size 12, enabled
  246. pcib0: matched entry for 0.18.INTA
  247. pcib0: slot 18 INTA hardwired to IRQ 16
  248. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f6000
  249. ohci early: SMM active, request owner change
  250. found-> vendor=0x1002, dev=0x4398, revid=0x00
  251. domain=0, bus=0, slot=18, func=1
  252. class=0c-03-10, hdrtype=0x00, mfdev=0
  253. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  254. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  255. intpin=a, irq=11
  256. map[10]: type Memory, range 32, base 0xfe9f7000, size 12, enabled
  257. pcib0: matched entry for 0.18.INTA
  258. pcib0: slot 18 INTA hardwired to IRQ 16
  259. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f7000
  260. ohci early: SMM active, request owner change
  261. found-> vendor=0x1002, dev=0x4396, revid=0x00
  262. domain=0, bus=0, slot=18, func=2
  263. class=0c-03-20, hdrtype=0x00, mfdev=0
  264. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  265. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  266. intpin=b, irq=10
  267. powerspec 2 supports D0 D1 D2 D3 current D0
  268. map[10]: type Memory, range 32, base 0xfe9fa800, size 8, enabled
  269. pcib0: matched entry for 0.18.INTB
  270. pcib0: slot 18 INTB hardwired to IRQ 17
  271. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fa800
  272. found-> vendor=0x1002, dev=0x4397, revid=0x00
  273. domain=0, bus=0, slot=19, func=0
  274. class=0c-03-10, hdrtype=0x00, mfdev=1
  275. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  276. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  277. intpin=a, irq=14
  278. map[10]: type Memory, range 32, base 0xfe9f8000, size 12, enabled
  279. pcib0: matched entry for 0.19.INTA
  280. pcib0: slot 19 INTA hardwired to IRQ 18
  281. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f8000
  282. ohci early: SMM active, request owner change
  283. found-> vendor=0x1002, dev=0x4398, revid=0x00
  284. domain=0, bus=0, slot=19, func=1
  285. class=0c-03-10, hdrtype=0x00, mfdev=0
  286. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  287. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  288. intpin=a, irq=14
  289. map[10]: type Memory, range 32, base 0xfe9f9000, size 12, enabled
  290. pcib0: matched entry for 0.19.INTA
  291. pcib0: slot 19 INTA hardwired to IRQ 18
  292. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f9000
  293. ohci early: SMM active, request owner change
  294. found-> vendor=0x1002, dev=0x4396, revid=0x00
  295. domain=0, bus=0, slot=19, func=2
  296. class=0c-03-20, hdrtype=0x00, mfdev=0
  297. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  298. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  299. intpin=b, irq=7
  300. powerspec 2 supports D0 D1 D2 D3 current D0
  301. map[10]: type Memory, range 32, base 0xfe9fac00, size 8, enabled
  302. pcib0: matched entry for 0.19.INTB
  303. pcib0: slot 19 INTB hardwired to IRQ 19
  304. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fac00
  305. found-> vendor=0x1002, dev=0x4385, revid=0x3d
  306. domain=0, bus=0, slot=20, func=0
  307. class=0c-05-00, hdrtype=0x00, mfdev=1
  308. cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
  309. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  310. found-> vendor=0x1002, dev=0x439d, revid=0x00
  311. domain=0, bus=0, slot=20, func=3
  312. class=06-01-00, hdrtype=0x00, mfdev=1
  313. cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
  314. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  315. found-> vendor=0x1002, dev=0x4384, revid=0x00
  316. domain=0, bus=0, slot=20, func=4
  317. class=06-04-01, hdrtype=0x01, mfdev=1
  318. cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
  319. lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
  320. found-> vendor=0x1002, dev=0x4399, revid=0x00
  321. domain=0, bus=0, slot=20, func=5
  322. class=0c-03-10, hdrtype=0x00, mfdev=0
  323. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  324. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  325. intpin=c, irq=14
  326. map[10]: type Memory, range 32, base 0xfe9fb000, size 12, enabled
  327. pcib0: matched entry for 0.20.INTC
  328. pcib0: slot 20 INTC hardwired to IRQ 18
  329. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fb000
  330. ohci early: SMM active, request owner change
  331. found-> vendor=0x1022, dev=0x1600, revid=0x00
  332. domain=0, bus=0, slot=24, func=0
  333. class=06-00-00, hdrtype=0x00, mfdev=1
  334. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  335. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  336. found-> vendor=0x1022, dev=0x1601, revid=0x00
  337. domain=0, bus=0, slot=24, func=1
  338. class=06-00-00, hdrtype=0x00, mfdev=1
  339. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  340. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  341. found-> vendor=0x1022, dev=0x1602, revid=0x00
  342. domain=0, bus=0, slot=24, func=2
  343. class=06-00-00, hdrtype=0x00, mfdev=1
  344. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  345. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  346. found-> vendor=0x1022, dev=0x1603, revid=0x00
  347. domain=0, bus=0, slot=24, func=3
  348. class=06-00-00, hdrtype=0x00, mfdev=1
  349. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  350. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  351. found-> vendor=0x1022, dev=0x1604, revid=0x00
  352. domain=0, bus=0, slot=24, func=4
  353. class=06-00-00, hdrtype=0x00, mfdev=1
  354. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  355. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  356. found-> vendor=0x1022, dev=0x1605, revid=0x00
  357. domain=0, bus=0, slot=24, func=5
  358. class=06-00-00, hdrtype=0x00, mfdev=1
  359. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  360. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  361. pcib1: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
  362. pcib1: domain 0
  363. pcib1: secondary bus 3
  364. pcib1: subordinate bus 3
  365. pcib1: I/O decode 0xe000-0xefff
  366. pcib1: memory decode 0xfeb00000-0xfebfffff
  367. pcib1: no prefetched decode
  368. pci3: <ACPI PCI bus> on pcib1
  369. pci3: domain=0, physical bus=3
  370. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  371. domain=0, bus=3, slot=0, func=0
  372. class=02-00-00, hdrtype=0x00, mfdev=0
  373. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  374. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  375. intpin=a, irq=11
  376. powerspec 2 supports D0 D3 current D0
  377. MSI supports 1 message, 64 bit
  378. MSI-X supports 5 messages in map 0x1c
  379. map[10]: type Memory, range 32, base 0xfebe0000, size 17, enabled
  380. pcib1: requested memory range 0xfebe0000-0xfebfffff: good
  381. map[18]: type I/O Port, range 32, base 0xe800, size 5, enabled
  382. pcib1: requested I/O range 0xe800-0xe81f: in range
  383. map[1c]: type Memory, range 32, base 0xfebdc000, size 14, enabled
  384. pcib1: requested memory range 0xfebdc000-0xfebdffff: good
  385. pcib1: matched entry for 3.0.INTA
  386. pcib1: slot 0 INTA hardwired to IRQ 48
  387. em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xe800-0xe81f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 48 at device 0.0 on pci3
  388. em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
  389. em0: attempting to allocate 1 MSI vectors (1 supported)
  390. msi: routing MSI IRQ 256 to local APIC 16 vector 49
  391. em0: using IRQ 256 for MSI
  392. em0: Using an MSI interrupt
  393. em0: [FILTER]
  394. em0: bpf attached
  395. em0: Ethernet address: 00:e0:81:cd:92:cd
  396. pcib2: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
  397. pcib2: domain 0
  398. pcib2: secondary bus 2
  399. pcib2: subordinate bus 2
  400. pcib2: I/O decode 0xd000-0xdfff
  401. pcib2: memory decode 0xfea00000-0xfeafffff
  402. pcib2: no prefetched decode
  403. pci2: <ACPI PCI bus> on pcib2
  404. pci2: domain=0, physical bus=2
  405. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  406. domain=0, bus=2, slot=0, func=0
  407. class=02-00-00, hdrtype=0x00, mfdev=0
  408. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  409. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  410. intpin=a, irq=15
  411. powerspec 2 supports D0 D3 current D0
  412. MSI supports 1 message, 64 bit
  413. MSI-X supports 5 messages in map 0x1c
  414. map[10]: type Memory, range 32, base 0xfeae0000, size 17, enabled
  415. pcib2: requested memory range 0xfeae0000-0xfeafffff: good
  416. map[18]: type I/O Port, range 32, base 0xd800, size 5, enabled
  417. pcib2: requested I/O range 0xd800-0xd81f: in range
  418. map[1c]: type Memory, range 32, base 0xfeadc000, size 14, enabled
  419. pcib2: requested memory range 0xfeadc000-0xfeadffff: good
  420. pcib2: matched entry for 2.0.INTA
  421. pcib2: slot 0 INTA hardwired to IRQ 47
  422. em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd800-0xd81f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 47 at device 0.0 on pci2
  423. em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
  424. em1: attempting to allocate 1 MSI vectors (1 supported)
  425. msi: routing MSI IRQ 257 to local APIC 16 vector 50
  426. em1: using IRQ 257 for MSI
  427. em1: Using an MSI interrupt
  428. em1: [FILTER]
  429. em1: bpf attached
  430. em1: Ethernet address: 00:e0:81:cd:92:cc
  431. ahci0: <ATI IXP700 AHCI SATA controller> port 0xb400-0xb407,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f mem 0xfe9fa400-0xfe9fa7ff irq 22 at device 17.0 on pci0
  432. ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe9fa400
  433. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 16 vector 51
  434. ahci0: [MPSAFE]
  435. ahci0: [ITHREAD]
  436. ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
  437. ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports
  438. ahci0: Caps2:
  439. ahcich0: <AHCI channel> at channel 0 on ahci0
  440. ahcich0: [MPSAFE]
  441. ahcich0: [ITHREAD]
  442. ahcich0: Caps:
  443. ahcich1: <AHCI channel> at channel 1 on ahci0
  444. ahcich1: [MPSAFE]
  445. ahcich1: [ITHREAD]
  446. ahcich1: Caps:
  447. ahcich2: <AHCI channel> at channel 2 on ahci0
  448. ahcich2: [MPSAFE]
  449. ahcich2: [ITHREAD]
  450. ahcich2: Caps:
  451. ahcich3: <AHCI channel> at channel 3 on ahci0
  452. ahcich3: [MPSAFE]
  453. ahcich3: [ITHREAD]
  454. ahcich3: Caps:
  455. ahcich4: <AHCI channel> at channel 4 on ahci0
  456. ahcich4: [MPSAFE]
  457. ahcich4: [ITHREAD]
  458. ahcich4: Caps:
  459. ahcich5: <AHCI channel> at channel 5 on ahci0
  460. ahcich5: [MPSAFE]
  461. ahcich5: [ITHREAD]
  462. ahcich5: Caps:
  463. ohci0: <OHCI (generic) USB controller> mem 0xfe9f6000-0xfe9f6fff irq 16 at device 18.0 on pci0
  464. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 52
  465. ohci0: [MPSAFE]
  466. ohci0: [ITHREAD]
  467. usbus0: <OHCI (generic) USB controller> on ohci0
  468. usbus0: bpf attached
  469. ohci0: usbpf: Attached
  470. ohci1: <OHCI (generic) USB controller> mem 0xfe9f7000-0xfe9f7fff irq 16 at device 18.1 on pci0
  471. ohci1: [MPSAFE]
  472. ohci1: [ITHREAD]
  473. usbus1: <OHCI (generic) USB controller> on ohci1
  474. usbus1: bpf attached
  475. ohci1: usbpf: Attached
  476. ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe9fa800-0xfe9fa8ff irq 17 at device 18.2 on pci0
  477. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 16 vector 53
  478. ehci0: [MPSAFE]
  479. ehci0: [ITHREAD]
  480. ehci0: Dropped interrupts workaround enabled
  481. usbus2: EHCI version 1.0
  482. usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
  483. usbus2: bpf attached
  484. ehci0: usbpf: Attached
  485. ohci2: <OHCI (generic) USB controller> mem 0xfe9f8000-0xfe9f8fff irq 18 at device 19.0 on pci0
  486. ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 54
  487. ohci2: [MPSAFE]
  488. ohci2: [ITHREAD]
  489. usbus3: <OHCI (generic) USB controller> on ohci2
  490. usbus3: bpf attached
  491. ohci2: usbpf: Attached
  492. ohci3: <OHCI (generic) USB controller> mem 0xfe9f9000-0xfe9f9fff irq 18 at device 19.1 on pci0
  493. ohci3: [MPSAFE]
  494. ohci3: [ITHREAD]
  495. usbus4: <OHCI (generic) USB controller> on ohci3
  496. usbus4: bpf attached
  497. ohci3: usbpf: Attached
  498. ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe9fac00-0xfe9facff irq 19 at device 19.2 on pci0
  499. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 55
  500. ehci1: [MPSAFE]
  501. ehci1: [ITHREAD]
  502. ehci1: Dropped interrupts workaround enabled
  503. usbus5: EHCI version 1.0
  504. usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
  505. usbus5: bpf attached
  506. ehci1: usbpf: Attached
  507. pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
  508. isab0: <PCI-ISA bridge> at device 20.3 on pci0
  509. isa0: <ISA bus> on isab0
  510. pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
  511. pcib3: domain 0
  512. pcib3: secondary bus 1
  513. pcib3: subordinate bus 1
  514. pcib3: I/O decode 0xc000-0xcfff
  515. pcib3: memory decode 0xfdf00000-0xfe7fffff
  516. pcib3: no prefetched decode
  517. pcib3: Subtractively decoded bridge.
  518. pci1: <ACPI PCI bus> on pcib3
  519. pci1: domain=0, physical bus=1
  520. found-> vendor=0x1a03, dev=0x2000, revid=0x10
  521. domain=0, bus=1, slot=9, func=0
  522. class=03-00-00, hdrtype=0x00, mfdev=0
  523. cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
  524. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  525. intpin=a, irq=15
  526. powerspec 3 supports D0 D1 D2 D3 current D0
  527. map[10]: type Memory, range 32, base 0xfe000000, size 23, enabled
  528. pcib3: requested memory range 0xfe000000-0xfe7fffff: good
  529. map[14]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
  530. pcib3: requested memory range 0xfdfe0000-0xfdffffff: good
  531. map[18]: type I/O Port, range 32, base 0xc800, size 7, enabled
  532. pcib3: requested I/O range 0xc800-0xc87f: in range
  533. pcib3: matched entry for 1.9.INTA
  534. pcib3: slot 9 INTA hardwired to IRQ 23
  535. vgapci0: <VGA-compatible display> port 0xc800-0xc87f mem 0xfe000000-0xfe7fffff,0xfdfe0000-0xfdffffff irq 23 at device 9.0 on pci1
  536. ohci4: <OHCI (generic) USB controller> mem 0xfe9fb000-0xfe9fbfff irq 18 at device 20.5 on pci0
  537. ohci4: [MPSAFE]
  538. ohci4: [ITHREAD]
  539. usbus6: <OHCI (generic) USB controller> on ohci4
  540. usbus6: bpf attached
  541. ohci4: usbpf: Attached
  542. acpi_button0: <Power Button> on acpi0
  543. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  544. atrtc0: registered as a time-of-day clock (resolution 1000000us)
  545. acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  546. device_attach: acpi_hpet1 attach returned 12
  547. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  548. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 56
  549. uart0: [FILTER]
  550. uart0: fast interrupt
  551. uart0: console (9600,n,8,1)
  552. uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
  553. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 57
  554. uart1: [FILTER]
  555. uart1: fast interrupt
  556. acpi0: wakeup code va 0xffffff890347e000 pa 0x4000
  557. ex_isa_identify()
  558. ahc_isa_probe 0: ioport 0xc00 alloc failed
  559. ahc_isa_probe 11: ioport 0xbc00 alloc failed
  560. isa_probe_children: disabling PnP devices
  561. atrtc: atrtc0 already exists; skipping it
  562. sc: sc0 already exists; skipping it
  563. uart: uart0 already exists; skipping it
  564. uart: uart1 already exists; skipping it
  565. isa_probe_children: probing non-PnP devices
  566. orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc800-0xcd7ff on isa0
  567. atkbd: the current kbd controller command byte 0067
  568. atkbd: unable to set the command byte.
  569. sc0: <System console> at flags 0x100 on isa0
  570. sc0: CGA <16 virtual consoles, flags=0x300>
  571. sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
  572. vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
  573. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  574. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  575. kbd0 at atkbd0
  576. kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
  577. ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 58
  578. atkbd0: [GIANT-LOCKED]
  579. atkbd0: [ITHREAD]
  580. psm0: current command byte:0067
  581. psm: failed to restore the keyboard controller command byte.
  582. psm0: unable to set the command byte.
  583. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
  584. ppc0: cannot reserve I/O port range
  585. ppc0: <Parallel port> failed to probe at irq 7 on isa0
  586. isa_probe_children: probing PnP devices
  587. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  588. acpi_throttle0: P_CNT from P_BLK 0x810
  589. hwpstate0: <Cool`n'Quiet 2.0> on cpu0
  590. Device configuration finished.
  591. procfs registered
  592. ZFS filesystem version 5
  593. ZFS storage pool version 28
  594. lapic: Divisor 2, Frequency 100000368 Hz
  595. Timecounter "TSC" frequency 3100011351 Hz quality -100
  596. Timecounters tick every 1.000 msec
  597. vlan: initialized, using hash tables with chaining
  598. lo0: bpf attached
  599. hptrr: no controller detected.
  600. md0: Preloaded image </boot/mfsroot> 35856384 bytes at 0xffffffff81175c80
  601. usbus0: 12Mbps Full Speed USB v1.0
  602. usbus1: 12Mbps Full Speed USB v1.0
  603. usbus2: 480Mbps High Speed USB v2.0
  604. usbus3: 12Mbps Full Speed USB v1.0
  605. usbus4: 12Mbps Full Speed USB v1.0
  606. usbus5: 480Mbps High Speed USB v2.0
  607. usbus6: 12Mbps Full Speed USB v1.0
  608. ahcich0: AHCI reset...
  609. ahcich0: SATA connect time=100us status=00000123
  610. ahcich0: AHCI reset: device found
  611. ahcich0: ugen0.1: <ATI> at usbus0
  612. uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  613. ugen1.1: <ATI> at usbus1
  614. uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  615. ugen2.1: <ATI> at usbus2
  616. uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  617. ugen3.1: <ATI> at usbus3
  618. uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  619. ugen4.1: <ATI> at usbus4
  620. uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
  621. ugen5.1: <ATI> at usbus5
  622. uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
  623. ugen6.1: <ATI> at usbus6
  624. uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
  625. AHCI reset: device ready after 0ms
  626. (aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
  627. (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
  628. ahcich1: AHCI reset...
  629. ahcich1: SATA connect time=100us status=00000123
  630. ahcich1: AHCI reset: device found
  631. ahcich1: AHCI reset: device ready after 0ms
  632. (aprobe0:ahcich1:0:15:0): SIGNATURE: 0000
  633. (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
  634. ahcich2: AHCI reset...
  635. ahcich2: SATA connect timeout time=10000us status=00000000
  636. ahcich2: AHCI reset: device not found
  637. ahcich3: AHCI reset...
  638. ahcich3: SATA connect timeout time=10000us status=00000000
  639. ahcich3: AHCI reset: device not found
  640. ahcich4: AHCI reset...
  641. ahcich4: SATA connect time=100us status=00000123
  642. ahcich4: AHCI reset: device found
  643. ahcich4: AHCI reset: device ready after 0ms
  644. (aprobe0:ahcich4:0:15:0): SIGNATURE: 0000
  645. (aprobe0:ahcich4:0:0:0): SIGNATURE: 0000
  646. ahcich5: AHCI reset...
  647. ahcich5: SATA connect time=100us status=00000123
  648. ahcich5: AHCI reset: device found
  649. ahcich5: AHCI reset: device ready after 0ms
  650. (aprobe0:ahcich5:0:15:0): SIGNATURE: 0000
  651. (aprobe0:ahcich5:0:0:0): SIGNATURE: 0000
  652. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
  653. ada0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  654. ada0: Serial Number WD-WXD1E71KUUR2
  655. ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada0
  656. PIO 8192bytes)
  657. ada0: Command Queueing enabled
  658. ada0: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  659. ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
  660. ada1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  661. ada1: Serial Number WD-WX81E81AKUK3
  662. ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  663. ada1: Command Queueing enabled
  664. ada1: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  665. ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
  666. ada2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  667. ada2: Serial Number WD-WX71E71MSF58
  668. ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  669. ada2: Command Queueing enabled
  670. GEOM: new disk ada1
  671. ada2: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  672. ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
  673. ada3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  674. ada3: Serial Number WD-WXD1E71LVFE8
  675. ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  676. ada3: Command Queueing enabled
  677. ada3: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  678. pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
  679. pass0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  680. pass0: Serial Number WD-WXD1E71KUUR2
  681. pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  682. pass0: Command Queueing enabled
  683. pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
  684. pass1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  685. pass1: Serial Number WD-WX81E81AKUK3
  686. pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  687. pass1: Command Queueing enabled
  688. pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
  689. pass2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  690. pass2: Serial Number WD-WX71E71MSF58
  691. pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  692. pass2: Command Queueing enabled
  693. pass3 at ahcich5 bus 0 scbus5 target 0 lun 0
  694. pass3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  695. pass3: Serial Number WD-WXD1E71LVFE8
  696. pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada2
  697. PIO 8192bytes)
  698. pass3: Command Queueing enabled
  699. ATA PseudoRAID loaded
  700. SMP: AP CPU #1 Launched!
  701. cpu1 AP:
  702. ID: 0x11000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  703. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  704. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  705. SMP: AP CPU #3 Launched!
  706. cpu3 AP:
  707. ID: 0x13000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  708. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  709. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  710. SMP: AP CPU #5 Launched!
  711. cpu5 AP:
  712. ID: 0x15000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  713. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  714. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  715. SMP: AP CPU #4 Launched!
  716. cpu4 AP:
  717. ID: 0x14000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  718. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  719. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  720. SMP: AP CPU #2 Launched!
  721. cpu2 AP:
  722. ID: 0x12000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  723. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  724. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  725. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 17 vector 48
  726. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 18 vector 48
  727. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 19 vector 48
  728. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 20 vector 48
  729. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 21 vector 48
  730. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 17 vector 49
  731. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 18 vector 49
  732. msi: Assigning MSI IRQ 256 to local APIC 19 vector 49
  733. msi: Assigning MSI IRQ 257 to local APIC 20 vector 49
  734. GEOM: new disk ada3
  735. uhub0: 3 ports with 3 removable, self powered
  736. uhub3: 3 ports with 3 removable, self powered
  737. uhub1: 3 ports with 3 removable, self powered
  738. uhub4: 3 ports with 3 removable, self powered
  739. uhub6: 2 ports with 2 removable, self powered
  740. Root mount waiting for: usbus5 usbus2
  741. Root mount waiting for: usbus5 usbus2
  742. uhub5: 6 ports with 6 removable, self powered
  743. uhub2: 6 ports with 6 removable, self powered
  744. Root mount waiting for: usbus5 usbus2
  745. Root mount waiting for: usbus2
  746. ugen0.2: <Alps Electric> at usbus0
  747. uhub7: <Alps Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.10, addr 2> on usbus0
  748. ugen2.2: <American Megatrends Inc.> at usbus2
  749. uhub8: <Hub Interface> on usbus2
  750. Root mount waiting for: usbus2
  751. uhub7: 3 ports with 2 removable, bus powered
  752. uhub8: 3 ports with 3 removable, self powered
  753. ugen0.3: <Alps Electric> at usbus0
  754. ukbd0: <Alps Electric Apple USB Keyboard, class 0/0, rev 1.10/1.03, addr 3> on usbus0
  755. kbd2 at ukbd0
  756. kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
  757. Root mount waiting for: usbus2
  758. ugen2.3: <American Megatrends Inc.> at usbus2
  759. ukbd1: <Keyboard Interface> on usbus2
  760. kbd3 at ukbd1
  761. kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000
  762. ums0: <Mouse Interface> on usbus2
  763. ums0: 3 buttons and [Z] coordinates ID=0
  764. Trying to mount root from ufs:/dev/md0
  765. start_init: trying /sbin/init
  766. Aug 14 07:01:11 init: initial setsid() failed: Operation not permitted
  767. em0: Link is up 100 Mbps Full Duplex
  768. em0: link state changed to UP
  769. em1: Link is up 1000 Mbps Full Duplex
  770. em1: link state changed to UP
  771. Interface IP-Address Broadcast
  772. Setting hostuuid: 03000200-0400-0500-0006-000700080009.
  773. Setting hostid: 0xfe4ac89c.
  774. Entropy harvesting: interrupts ethernet point_to_point kickstart.
  775. Starting file system checks:
  776. Mounting local file systems:.
  777. Setting hostname: blinstall.
  778. em0: Link is Down
  779. em0: link state changed to DOWN
  780. em1: Link is Down
  781. em1: link state changed to DOWN
  782. Starting Network: lo0 em0 em1.
  783. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  784. options=3<RXCSUM,TXCSUM>
  785. inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
  786. inet6 ::1 prefixlen 128
  787. inet 127.0.0.1 netmask 0xff000000
  788. nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
  789. em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  790. options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
  791. ether 00:e0:81:cd:92:cd
  792. media: Ethernet autoselect
  793. status: no carrier
  794. em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  795. options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
  796. ether 00:e0:81:cd:92:cc
  797. media: Ethernet autoselect
  798. status: no carrier
  799. add net ::ffff:0.0.0.0: gateway ::1
  800. add net ::0.0.0.0: gateway ::1
  801. Starting devd.
  802. Starting ums0 moused.
  803. Starting dhclient.
  804. em0: no link ....em0: Link is up 100 Mbps Full Duplex
  805. em0: link state changed to UP
  806. got link
  807. DHCPDISCOVER on em0 to 255.255.255.255 port 67 interval 3
  808. DHCPOFFER from 10.3.3.1
  809. em1: Link is up 1000 Mbps Full Duplex
  810. em1: link state changed to UP
  811. DHCPREQUEST on em0 to 255.255.255.255 port 67
  812. DHCPACK from 10.3.3.1
  813. bound to 10.3.3.12 -- renewal in 300 seconds.
  814. Starting dhclient.
  815. DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 7
  816. DHCPOFFER from 10.3.2.1
  817. DHCPREQUEST on em1 to 255.255.255.255 port 67
  818. DHCPACK from 10.3.2.1
  819. bound to 10.3.2.110 -- renewal in 43200 seconds.
  820. dhclient already running? (pid=927).
  821. dhclient already running? (pid=969).
  822. Generating host.conf.
  823. Creating and/or trimming log files.
  824. Starting syslogd.
  825. ELF ldconfig path: /lib /usr/lib /usr/lib/compat
  826. 32-bit compatibility ldconfig path:
  827. Clearing /tmp (X related).
  828. Updating motd:.
  829. Configuring syscons: blanktime.
  830. Starting sshd.
  831. Starting background file system checks in 60 seconds.
  832.  
  833. Tue Aug 14 07:01:20 UTC 2012
  834.  
  835. FreeBSD/amd64 (blinstall) (ttyu0)
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!