API tools faq
paste
Guest User

Untitled

a guest
Nov 30th, 2018
303
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.20 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.16-rt9-MANJARO] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.11
  6. Device Model: ST31500341AS
  7. Serial Number: 9VS3HYKY
  8. LU WWN Device Id: 5 000c50 01fa21bdb
  9. Firmware Version: CC1H
  10. User Capacity: 1 500 301 910 016 bytes [1,50 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 7200 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 2.6, 3.0 Gb/s
  16. Local Time is: Fri Nov 30 10:01:18 2018 EET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: FAILED!
  22. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  23. See vendor-specific Attribute list for failed Attributes.
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 617) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 293) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x103f) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000f 085 084 006 Pre-fail Always - 117589086
  63. 3 Spin_Up_Time 0x0003 100 095 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1204
  65. 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 4095
  66. 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 8607072753
  67. 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2258
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1217
  70. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  71. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1721
  72. 188 Command_Timeout 0x0032 098 076 000 Old_age Always - 146031181925
  73. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 295
  74. 190 Airflow_Temperature_Cel 0x0022 071 051 045 Old_age Always - 29 (Min/Max 25/29)
  75. 194 Temperature_Celsius 0x0022 029 049 000 Old_age Always - 29 (0 15 0 0 0)
  76. 195 Hardware_ECC_Recovered 0x001a 048 028 000 Old_age Always - 117589086
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2237 (222 198 0)
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 26943498
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1400954666
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 116 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 116 occurred at disk power-on lifetime: 2257 hours (94 days + 1 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 04 71 04 9d 00 32 40 Device Fault; Error: ABRT at LBA = 0x0032009d = 3276957
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 60 00 10 00 00 03 40 00 00:01:42.247 READ FPDMA QUEUED
  112. 60 00 18 00 c0 00 40 00 00:01:42.231 READ FPDMA QUEUED
  113. 60 00 08 08 08 00 40 00 00:01:42.230 READ FPDMA QUEUED
  114. 60 00 08 ff ff ff 4f 00 00:01:42.229 READ FPDMA QUEUED
  115. 60 00 68 88 07 10 40 00 00:01:34.106 READ FPDMA QUEUED
  116.  
  117. Error 115 occurred at disk power-on lifetime: 2257 hours (94 days + 1 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 04 71 04 9d 00 32 40 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 35 03 08 00 08 00 41 00 00:00:42.691 WRITE DMA EXT
  129. 35 03 08 00 08 00 41 00 00:00:42.648 WRITE DMA EXT
  130. 35 03 08 00 08 00 41 00 00:00:42.605 WRITE DMA EXT
  131. 35 03 08 00 08 00 41 00 00:00:42.562 WRITE DMA EXT
  132. 35 03 08 00 08 00 41 00 00:00:42.518 WRITE DMA EXT
  133.  
  134. Error 114 occurred at disk power-on lifetime: 2257 hours (94 days + 1 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 04 71 04 9d 00 32 40 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. 35 03 08 00 08 00 41 00 00:00:42.648 WRITE DMA EXT
  146. 35 03 08 00 08 00 41 00 00:00:42.605 WRITE DMA EXT
  147. 35 03 08 00 08 00 41 00 00:00:42.562 WRITE DMA EXT
  148. 35 03 08 00 08 00 41 00 00:00:42.518 WRITE DMA EXT
  149. 35 03 08 00 08 00 41 00 00:00:42.473 WRITE DMA EXT
  150.  
  151. Error 113 occurred at disk power-on lifetime: 2257 hours (94 days + 1 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 04 71 04 9d 00 32 40 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 35 03 08 00 08 00 41 00 00:00:42.605 WRITE DMA EXT
  163. 35 03 08 00 08 00 41 00 00:00:42.562 WRITE DMA EXT
  164. 35 03 08 00 08 00 41 00 00:00:42.518 WRITE DMA EXT
  165. 35 03 08 00 08 00 41 00 00:00:42.473 WRITE DMA EXT
  166. 25 03 08 00 09 41 45 00 00:00:42.443 READ DMA EXT
  167.  
  168. Error 112 occurred at disk power-on lifetime: 2257 hours (94 days + 1 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 04 71 04 9d 00 32 40 Device Fault; Error: ABRT 4 sectors at LBA = 0x0032009d = 3276957
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. 35 03 08 00 08 00 41 00 00:00:42.562 WRITE DMA EXT
  180. 35 03 08 00 08 00 41 00 00:00:42.518 WRITE DMA EXT
  181. 35 03 08 00 08 00 41 00 00:00:42.473 WRITE DMA EXT
  182. 25 03 08 00 09 41 45 00 00:00:42.443 READ DMA EXT
  183. 35 03 08 00 08 00 41 00 00:00:42.412 WRITE DMA EXT
  184.  
  185. SMART Self-test log structure revision number 1
  186. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  187. # 1 Short offline Completed: unknown failure 90% 2193 0
  188. # 2 Short offline Completed: unknown failure 90% 2193 0
  189. # 3 Short offline Completed: unknown failure 90% 2193 0
  190. # 4 Short offline Completed: unknown failure 90% 2192 0
  191. # 5 Short offline Completed: unknown failure 90% 2192 0
  192. # 6 Short offline Completed: unknown failure 90% 2192 0
  193. # 7 Short offline Completed: unknown failure 90% 1702 0
  194. # 8 Short offline Completed: unknown failure 90% 1697 0
  195.  
  196. SMART Selective self-test log data structure revision number 1
  197. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  198. 1 0 0 Not_testing
  199. 2 0 0 Not_testing
  200. 3 0 0 Not_testing
  201. 4 0 0 Not_testing
  202. 5 0 0 Not_testing
  203. Selective self-test flags (0x0):
  204. After scanning selected spans, do NOT read-scan remainder of disk.
  205. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!