Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 6.7.5-gentoo-dist (root@pomiot) (x86_64-pc-linux-gnu-gcc (Gentoo 13.2.1_p20240113-r1 p12) 13.2.1 20240113, GNU ld (Gentoo 2.40 p7) 2.40.0) #1 SMP PREEMPT_DYNAMIC Sat Feb 17 07:30:27 -00 2024
- [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7.5-gentoo-dist root=UUID=43293a53-c4b2-4d0b-b28a-abddb8465ee0 ro
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007369bfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007369c000-0x000000007369cfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007369d000-0x00000000736c6fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000736c7000-0x0000000073779fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007377a000-0x0000000074079fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000007407a000-0x000000008a28efff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008a28f000-0x000000008a48efff] type 20
- [ 0.000000] BIOS-e820: [mem 0x000000008a48f000-0x000000008ac7efff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008ac7f000-0x000000008ae7efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000008ae7f000-0x000000008aefefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008aefffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008af00000-0x000000008fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026dffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] APIC: Static calls initialized
- [ 0.000000] efi: EFI v2.4 by INSYDE Corp.
- [ 0.000000] efi: SMBIOS=0x8a500000 SMBIOS 3.0=0x8a4fe000 ESRT=0x8a501d18 ACPI 2.0=0x8aefe014
- [ 0.000000] efi: Remove mem43: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
- [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
- [ 0.000000] efi: Remove mem44: MMIO range=[0xfd000000-0xfe7fffff] (24MB) from e820 map
- [ 0.000000] e820: remove [mem 0xfd000000-0xfe7fffff] reserved
- [ 0.000000] efi: Not removing mem45: MMIO range=[0xfeb00000-0xfeb03fff] (16KB) from e820 map
- [ 0.000000] efi: Not removing mem46: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
- [ 0.000000] efi: Not removing mem47: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
- [ 0.000000] efi: Not removing mem48: MMIO range=[0xfed10000-0xfed19fff] (40KB) from e820 map
- [ 0.000000] efi: Not removing mem49: MMIO range=[0xfed84000-0xfed84fff] (4KB) from e820 map
- [ 0.000000] efi: Not removing mem50: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
- [ 0.000000] efi: Remove mem51: MMIO range=[0xff700000-0xffffffff] (9MB) from e820 map
- [ 0.000000] e820: remove [mem 0xff700000-0xffffffff] reserved
- [ 0.000000] SMBIOS 3.0.0 present.
- [ 0.000000] DMI: Acer Swift SF314-51/M3_SK, BIOS V1.11 02/27/2018
- [ 0.000000] tsc: Detected 2400.000 MHz processor
- [ 0.001016] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.001020] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.001033] last_pfn = 0x26e000 max_arch_pfn = 0x400000000
- [ 0.001042] total RAM covered: 14511M
- [ 0.001271] Found optimal setting for mtrr clean up
- [ 0.001272] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G
- [ 0.001277] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
- [ 0.001279] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.001753] e820: update [mem 0x8af00000-0xffffffff] usable ==> reserved
- [ 0.001760] last_pfn = 0x8af00 max_arch_pfn = 0x400000000
- [ 0.018597] esrt: Reserving ESRT space from 0x000000008a501d18 to 0x000000008a501d78.
- [ 0.018604] Using GB pages for direct mapping
- [ 0.019339] Secure boot disabled
- [ 0.019339] RAMDISK: [mem 0x2fdc5000-0x33ed9fff]
- [ 0.019349] ACPI: Early table checksum verification disabled
- [ 0.019352] ACPI: RSDP 0x000000008AEFE014 000024 (v02 ACRSYS)
- [ 0.019357] ACPI: XSDT 0x000000008AEB8188 0000E4 (v01 ACRSYS ACRPRDCT 00000000 01000013)
- [ 0.019363] ACPI: FACP 0x000000008AEE8000 0000F4 (v05 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.019370] ACPI: DSDT 0x000000008AEBE000 026E5C (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.019374] ACPI: FACS 0x000000008AE41000 000040
- [ 0.019378] ACPI: TCPA 0x000000008AEFC000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.019382] ACPI: UEFI 0x000000008AEFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
- [ 0.019385] ACPI: TPM2 0x000000008AEF8000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.019389] ACPI: MSDM 0x000000008AEF2000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019393] ACPI: SSDT 0x000000008AEEB000 00051C (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.019397] ACPI: BOOT 0x000000008AEE9000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019401] ACPI: APIC 0x000000008AEE6000 0000BC (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019405] ACPI: SSDT 0x000000008AEBD000 000DE0 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.019409] ACPI: SSDT 0x000000008AEBB000 000B49 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.019413] ACPI: DMAR 0x000000008AEB7000 0000F0 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019416] ACPI: FPDT 0x000000008AEB6000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
- [ 0.019420] ACPI: ECDT 0x000000008AEFD000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019424] ACPI: SSDT 0x000000008AEF9000 000554 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.019428] ACPI: SSDT 0x000000008AEEC000 0057E7 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.019432] ACPI: HPET 0x000000008AEE7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019436] ACPI: SSDT 0x000000008AEBC000 00019A (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.019440] ACPI: SSDT 0x000000008AEB9000 000E73 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.019444] ACPI: SSDT 0x000000008AEF3000 004FE4 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.019448] ACPI: MCFG 0x000000008AEE5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019452] ACPI: ASPT 0x000000008AEEA000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019455] ACPI: UEFI 0x000000008AEFB000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019459] ACPI: SSDT 0x000000008AEBA000 0004A3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.019463] ACPI: BGRT 0x000000008AEB5000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.019466] ACPI: Reserving FACP table memory at [mem 0x8aee8000-0x8aee80f3]
- [ 0.019468] ACPI: Reserving DSDT table memory at [mem 0x8aebe000-0x8aee4e5b]
- [ 0.019469] ACPI: Reserving FACS table memory at [mem 0x8ae41000-0x8ae4103f]
- [ 0.019471] ACPI: Reserving TCPA table memory at [mem 0x8aefc000-0x8aefc031]
- [ 0.019472] ACPI: Reserving UEFI table memory at [mem 0x8aefa000-0x8aefa041]
- [ 0.019473] ACPI: Reserving TPM2 table memory at [mem 0x8aef8000-0x8aef8033]
- [ 0.019474] ACPI: Reserving MSDM table memory at [mem 0x8aef2000-0x8aef2054]
- [ 0.019474] ACPI: Reserving SSDT table memory at [mem 0x8aeeb000-0x8aeeb51b]
- [ 0.019475] ACPI: Reserving BOOT table memory at [mem 0x8aee9000-0x8aee9027]
- [ 0.019476] ACPI: Reserving APIC table memory at [mem 0x8aee6000-0x8aee60bb]
- [ 0.019477] ACPI: Reserving SSDT table memory at [mem 0x8aebd000-0x8aebdddf]
- [ 0.019479] ACPI: Reserving SSDT table memory at [mem 0x8aebb000-0x8aebbb48]
- [ 0.019480] ACPI: Reserving DMAR table memory at [mem 0x8aeb7000-0x8aeb70ef]
- [ 0.019480] ACPI: Reserving FPDT table memory at [mem 0x8aeb6000-0x8aeb6043]
- [ 0.019481] ACPI: Reserving ECDT table memory at [mem 0x8aefd000-0x8aefd0c0]
- [ 0.019483] ACPI: Reserving SSDT table memory at [mem 0x8aef9000-0x8aef9553]
- [ 0.019484] ACPI: Reserving SSDT table memory at [mem 0x8aeec000-0x8aef17e6]
- [ 0.019485] ACPI: Reserving HPET table memory at [mem 0x8aee7000-0x8aee7037]
- [ 0.019486] ACPI: Reserving SSDT table memory at [mem 0x8aebc000-0x8aebc199]
- [ 0.019487] ACPI: Reserving SSDT table memory at [mem 0x8aeb9000-0x8aeb9e72]
- [ 0.019488] ACPI: Reserving SSDT table memory at [mem 0x8aef3000-0x8aef7fe3]
- [ 0.019489] ACPI: Reserving MCFG table memory at [mem 0x8aee5000-0x8aee503b]
- [ 0.019490] ACPI: Reserving ASPT table memory at [mem 0x8aeea000-0x8aeea033]
- [ 0.019491] ACPI: Reserving UEFI table memory at [mem 0x8aefb000-0x8aefb235]
- [ 0.019492] ACPI: Reserving SSDT table memory at [mem 0x8aeba000-0x8aeba4a2]
- [ 0.019493] ACPI: Reserving BGRT table memory at [mem 0x8aeb5000-0x8aeb5037]
- [ 0.019643] No NUMA configuration found
- [ 0.019644] Faking a node at [mem 0x0000000000000000-0x000000026dffffff]
- [ 0.019655] NODE_DATA(0) allocated [mem 0x26dfd5000-0x26dffffff]
- [ 0.019910] Zone ranges:
- [ 0.019911] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.019913] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.019915] Normal [mem 0x0000000100000000-0x000000026dffffff]
- [ 0.019917] Device empty
- [ 0.019918] Movable zone start for each node
- [ 0.019921] Early memory node ranges
- [ 0.019922] node 0: [mem 0x0000000000001000-0x0000000000057fff]
- [ 0.019924] node 0: [mem 0x0000000000059000-0x0000000000085fff]
- [ 0.019925] node 0: [mem 0x0000000000100000-0x000000007369bfff]
- [ 0.019927] node 0: [mem 0x00000000736c7000-0x0000000073779fff]
- [ 0.019928] node 0: [mem 0x000000007407a000-0x000000008a28efff]
- [ 0.019929] node 0: [mem 0x000000008aeff000-0x000000008aefffff]
- [ 0.019930] node 0: [mem 0x0000000100000000-0x000000026dffffff]
- [ 0.019932] Initmem setup node 0 [mem 0x0000000000001000-0x000000026dffffff]
- [ 0.019937] On node 0, zone DMA: 1 pages in unavailable ranges
- [ 0.019939] On node 0, zone DMA: 1 pages in unavailable ranges
- [ 0.019980] On node 0, zone DMA: 122 pages in unavailable ranges
- [ 0.023547] On node 0, zone DMA32: 43 pages in unavailable ranges
- [ 0.024281] On node 0, zone DMA32: 2304 pages in unavailable ranges
- [ 0.024322] On node 0, zone DMA32: 3184 pages in unavailable ranges
- [ 0.036079] On node 0, zone Normal: 20736 pages in unavailable ranges
- [ 0.036181] On node 0, zone Normal: 8192 pages in unavailable ranges
- [ 0.036203] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
- [ 0.036479] ACPI: PM-Timer IO Port: 0x1808
- [ 0.036487] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.036489] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.036490] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.036491] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.036492] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.036493] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.036494] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- [ 0.036495] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
- [ 0.036525] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
- [ 0.036529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.036531] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.036537] ACPI: Using ACPI (MADT) for SMP configuration information
- [ 0.036538] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.036546] e820: update [mem 0x7a8ea000-0x7a9ddfff] usable ==> reserved
- [ 0.036562] TSC deadline timer available
- [ 0.036563] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.036587] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.036590] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
- [ 0.036592] PM: hibernation: Registered nosave memory: [mem 0x00086000-0x000fffff]
- [ 0.036594] PM: hibernation: Registered nosave memory: [mem 0x7369c000-0x7369cfff]
- [ 0.036596] PM: hibernation: Registered nosave memory: [mem 0x7369d000-0x736c6fff]
- [ 0.036598] PM: hibernation: Registered nosave memory: [mem 0x7377a000-0x74079fff]
- [ 0.036600] PM: hibernation: Registered nosave memory: [mem 0x7a8ea000-0x7a9ddfff]
- [ 0.036602] PM: hibernation: Registered nosave memory: [mem 0x8a28f000-0x8a48efff]
- [ 0.036603] PM: hibernation: Registered nosave memory: [mem 0x8a48f000-0x8ac7efff]
- [ 0.036604] PM: hibernation: Registered nosave memory: [mem 0x8ac7f000-0x8ae7efff]
- [ 0.036604] PM: hibernation: Registered nosave memory: [mem 0x8ae7f000-0x8aefefff]
- [ 0.036606] PM: hibernation: Registered nosave memory: [mem 0x8af00000-0x8fffffff]
- [ 0.036607] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfeafffff]
- [ 0.036608] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
- [ 0.036609] PM: hibernation: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
- [ 0.036610] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.036611] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.036612] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
- [ 0.036613] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
- [ 0.036613] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
- [ 0.036614] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
- [ 0.036615] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
- [ 0.036616] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
- [ 0.036617] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.036618] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
- [ 0.036620] [mem 0x90000000-0xfeafffff] available for PCI devices
- [ 0.036621] Booting paravirtualized kernel on bare hardware
- [ 0.036624] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
- [ 0.046073] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
- [ 0.046446] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
- [ 0.046455] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
- [ 0.046458] pcpu-alloc: [0] 0 1 2 3
- [ 0.046483] Kernel command line: BOOT_IMAGE=/vmlinuz-6.7.5-gentoo-dist root=UUID=43293a53-c4b2-4d0b-b28a-abddb8465ee0 ro
- [ 0.046529] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.7.5-gentoo-dist", will be passed to user space.
- [ 0.046576] random: crng init done
- [ 0.047553] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
- [ 0.048058] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.048155] Fallback order for Node 0: 0
- [ 0.048158] Built 1 zonelists, mobility grouping on. Total pages: 2030207
- [ 0.048160] Policy zone: Normal
- [ 0.048450] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
- [ 0.048461] software IO TLB: area num 4.
- [ 0.084007] Memory: 7862140K/8250276K available (20480K kernel code, 3558K rwdata, 9228K rodata, 4620K init, 4240K bss, 387876K reserved, 0K cma-reserved)
- [ 0.084287] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.084301] Kernel/User page tables isolation: enabled
- [ 0.084331] ftrace: allocating 58267 entries in 228 pages
- [ 0.096719] ftrace: allocated 228 pages with 4 groups
- [ 0.097989] Dynamic Preempt: voluntary
- [ 0.098027] rcu: Preemptible hierarchical RCU implementation.
- [ 0.098028] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
- [ 0.098029] Trampoline variant of Tasks RCU enabled.
- [ 0.098030] Rude variant of Tasks RCU enabled.
- [ 0.098031] Tracing variant of Tasks RCU enabled.
- [ 0.098032] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
- [ 0.098033] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.102593] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
- [ 0.102841] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.103103] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
- [ 0.103137] Console: colour dummy device 80x25
- [ 0.103140] printk: legacy console [tty0] enabled
- [ 0.103642] ACPI: Core revision 20230628
- [ 0.103959] hpet: HPET dysfunctional in PC10. Force disabled.
- [ 0.103964] APIC: Switch to symmetric I/O mode setup
- [ 0.103967] DMAR: Host address width 39
- [ 0.103970] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.103981] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
- [ 0.103989] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.103999] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
- [ 0.104004] DMAR: RMRR base: 0x0000008ab7b000 end: 0x0000008ab9afff
- [ 0.104008] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
- [ 0.104011] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
- [ 0.104015] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
- [ 0.104019] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
- [ 0.104022] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.104026] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
- [ 0.104027] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
- [ 0.105782] DMAR-IR: Enabled IRQ remapping in xapic mode
- [ 0.105786] x2apic: IRQ remapping doesn't support X2APIC mode
- [ 0.109658] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
- [ 0.109669] Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.00 BogoMIPS (lpj=8000000)
- [ 0.109703] x86/cpu: SGX disabled by BIOS.
- [ 0.109711] CPU0: Thermal monitoring enabled (TM1)
- [ 0.109759] process: using mwait in idle threads
- [ 0.109764] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
- [ 0.109767] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.109775] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
- [ 0.109781] Spectre V2 : Mitigation: IBRS
- [ 0.109783] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 0.109787] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
- [ 0.109790] RETBleed: Mitigation: IBRS
- [ 0.109794] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
- [ 0.109798] Spectre V2 : User space: Mitigation: STIBP via prctl
- [ 0.109802] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
- [ 0.109815] MDS: Mitigation: Clear CPU buffers
- [ 0.109818] MMIO Stale Data: Mitigation: Clear CPU buffers
- [ 0.109824] SRBDS: Mitigation: Microcode
- [ 0.109828] GDS: Vulnerable: No microcode
- [ 0.109837] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.109844] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.109849] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.109853] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
- [ 0.109860] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
- [ 0.109865] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.109870] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
- [ 0.109875] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
- [ 0.109880] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
- [ 0.113000] Freeing SMP alternatives memory: 48K
- [ 0.113000] pid_max: default: 32768 minimum: 301
- [ 0.113000] LSM: initializing lsm=lockdown,capability,yama,integrity
- [ 0.113000] Yama: becoming mindful.
- [ 0.113000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.113000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.113000] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
- [ 0.113000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
- [ 0.113000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
- [ 0.113000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
- [ 0.113000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
- [ 0.113000] ... version: 4
- [ 0.113000] ... bit width: 48
- [ 0.113000] ... generic registers: 4
- [ 0.113000] ... value mask: 0000ffffffffffff
- [ 0.113000] ... max period: 00007fffffffffff
- [ 0.113000] ... fixed-purpose events: 3
- [ 0.113000] ... event mask: 000000070000000f
- [ 0.113000] signal: max sigframe size: 2032
- [ 0.113000] Estimated ratio of average max frequency by base frequency (times 1024): 1152
- [ 0.113000] rcu: Hierarchical SRCU implementation.
- [ 0.113000] rcu: Max phase no-delay instances is 1000.
- [ 0.113000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.113000] smp: Bringing up secondary CPUs ...
- [ 0.113000] smpboot: x86: Booting SMP configuration:
- [ 0.113000] .... node #0, CPUs: #1 #2 #3
- [ 0.117181] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
- [ 0.117181] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
- [ 0.117181] smp: Brought up 1 node, 4 CPUs
- [ 0.117181] smpboot: Max logical packages: 1
- [ 0.117181] smpboot: Total of 4 processors activated (19207.00 BogoMIPS)
- [ 0.119997] devtmpfs: initialized
- [ 0.119997] x86/mm: Memory block size: 128MB
- [ 0.120668] ACPI: PM: Registering ACPI NVS region [mem 0x7369c000-0x7369cfff] (4096 bytes)
- [ 0.120668] ACPI: PM: Registering ACPI NVS region [mem 0x8ac7f000-0x8ae7efff] (2097152 bytes)
- [ 0.120668] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.120668] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.120668] pinctrl core: initialized pinctrl subsystem
- [ 0.120668] PM: RTC time: 17:17:38, date: 2024-02-17
- [ 0.120668] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.120795] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
- [ 0.120804] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.120811] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.120831] audit: initializing netlink subsys (disabled)
- [ 0.120838] audit: type=2000 audit(1708190258.009:1): state=initialized audit_enabled=0 res=1
- [ 0.120838] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.120838] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.120838] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.120838] thermal_sys: Registered thermal governor 'user_space'
- [ 0.120902] cpuidle: using governor menu
- [ 0.120902] Simple Boot Flag at 0x44 set to 0x1
- [ 0.120902] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.120902] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.120902] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.120902] PCI: not using MMCONFIG
- [ 0.120902] PCI: Using configuration type 1 for base access
- [ 0.120902] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.123089] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
- [ 0.126378] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.126385] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
- [ 0.126390] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.126394] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
- [ 0.126689] cryptd: max_cpu_qlen set to 1000
- [ 0.126689] raid6: skipped pq benchmark and selected avx2x4
- [ 0.126689] raid6: using avx2x2 recovery algorithm
- [ 0.126689] fbcon: Taking over console
- [ 0.126689] ACPI: Added _OSI(Module Device)
- [ 0.126689] ACPI: Added _OSI(Processor Device)
- [ 0.126689] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.126689] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.169154] ACPI: 10 ACPI AML tables successfully acquired and loaded
- [ 0.170599] ACPI: EC: EC started
- [ 0.170603] ACPI: EC: interrupt blocked
- [ 0.171490] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.171495] ACPI: EC: Boot ECDT EC used to handle transactions
- [ 0.172803] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 0.196981] ACPI: Dynamic OEM Table Load:
- [ 0.196997] ACPI: SSDT 0xFFFF928B013A1800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20160108)
- [ 0.198367] ACPI: Dynamic OEM Table Load:
- [ 0.198379] ACPI: SSDT 0xFFFF928B013F5800 00061B (v02 PmRef Cpu0Ist 00003000 INTL 20160108)
- [ 0.200366] ACPI: Dynamic OEM Table Load:
- [ 0.200380] ACPI: SSDT 0xFFFF928B013F3800 0005AA (v02 PmRef ApIst 00003000 INTL 20160108)
- [ 0.202055] ACPI: Dynamic OEM Table Load:
- [ 0.202066] ACPI: SSDT 0xFFFF928B01332600 000119 (v02 PmRef ApCst 00003000 INTL 20160108)
- [ 0.205492] ACPI: _OSC evaluated successfully for all CPUs
- [ 0.205498] ACPI: Interpreter enabled
- [ 0.205552] ACPI: PM: (supports S0 S3 S4 S5)
- [ 0.205556] ACPI: Using IOAPIC for interrupt routing
- [ 0.207386] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.210968] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
- [ 0.210988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.210994] PCI: Using E820 reservations for host bridge windows
- [ 0.212221] ACPI: Enabled 7 GPEs in block 00 to 7F
- [ 0.213133] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
- [ 0.213553] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
- [ 0.213952] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
- [ 0.236352] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.XHC.RHUB.TPLD], AE_NOT_FOUND (20230628/psargs-330)
- [ 0.236367] ACPI Error: Aborting method \_SB.UBTC.CR01._PLD due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
- [ 0.237677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.237690] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
- [ 0.241173] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
- [ 0.241181] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 0.243868] PCI host bridge to bus 0000:00
- [ 0.243874] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.243880] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.243887] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
- [ 0.243893] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
- [ 0.243898] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
- [ 0.243904] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.244019] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
- [ 0.244130] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
- [ 0.244145] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
- [ 0.244156] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
- [ 0.244166] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
- [ 0.244190] pci 0000:00:02.0: BAR 2: assigned to efifb
- [ 0.244197] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.244500] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
- [ 0.244526] pci 0000:00:14.0: reg 0x10: [mem 0xb1200000-0xb120ffff 64bit]
- [ 0.244609] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.245356] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
- [ 0.245383] pci 0000:00:14.2: reg 0x10: [mem 0xb122a000-0xb122afff 64bit]
- [ 0.245677] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
- [ 0.245890] pci 0000:00:15.0: reg 0x10: [mem 0xb122b000-0xb122bfff 64bit]
- [ 0.247143] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
- [ 0.247355] pci 0000:00:15.1: reg 0x10: [mem 0xb122c000-0xb122cfff 64bit]
- [ 0.248508] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
- [ 0.248536] pci 0000:00:16.0: reg 0x10: [mem 0xb122d000-0xb122dfff 64bit]
- [ 0.248627] pci 0000:00:16.0: PME# supported from D3hot
- [ 0.248934] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
- [ 0.248955] pci 0000:00:17.0: reg 0x10: [mem 0xb1228000-0xb1229fff]
- [ 0.248969] pci 0000:00:17.0: reg 0x14: [mem 0xb1230000-0xb12300ff]
- [ 0.248983] pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
- [ 0.248996] pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
- [ 0.249009] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
- [ 0.249022] pci 0000:00:17.0: reg 0x24: [mem 0xb122e000-0xb122e7ff]
- [ 0.249078] pci 0000:00:17.0: PME# supported from D3hot
- [ 0.249432] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
- [ 0.249528] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.250188] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
- [ 0.250292] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.250977] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
- [ 0.251396] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
- [ 0.251418] pci 0000:00:1f.2: reg 0x10: [mem 0xb1224000-0xb1227fff]
- [ 0.251767] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
- [ 0.251798] pci 0000:00:1f.3: reg 0x10: [mem 0xb1220000-0xb1223fff 64bit]
- [ 0.251839] pci 0000:00:1f.3: reg 0x20: [mem 0xb1210000-0xb121ffff 64bit]
- [ 0.251903] pci 0000:00:1f.3: PME# supported from D3hot D3cold
- [ 0.252560] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
- [ 0.252625] pci 0000:00:1f.4: reg 0x10: [mem 0xb122f000-0xb122f0ff 64bit]
- [ 0.252703] pci 0000:00:1f.4: reg 0x20: [io 0x3040-0x305f]
- [ 0.253101] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.253349] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
- [ 0.253401] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb11fffff 64bit]
- [ 0.253770] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 0.254389] pci 0000:00:1c.3: PCI bridge to [bus 02]
- [ 0.254397] pci 0000:00:1c.3: bridge window [mem 0xb1000000-0xb11fffff]
- [ 0.256296] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
- [ 0.256370] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
- [ 0.256439] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
- [ 0.256507] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
- [ 0.256578] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
- [ 0.256646] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
- [ 0.256715] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
- [ 0.256786] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
- [ 0.260092] ACPI: EC: interrupt unblocked
- [ 0.260097] ACPI: EC: event unblocked
- [ 0.260110] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.260114] ACPI: EC: GPE=0x50
- [ 0.260118] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot ECDT EC initialization complete
- [ 0.260123] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
- [ 0.260207] iommu: Default domain type: Translated
- [ 0.260207] iommu: DMA domain TLB invalidation policy: lazy mode
- [ 0.260207] SCSI subsystem initialized
- [ 0.260207] libata version 3.00 loaded.
- [ 0.260207] ACPI: bus type USB registered
- [ 0.260207] usbcore: registered new interface driver usbfs
- [ 0.260207] usbcore: registered new interface driver hub
- [ 0.260207] usbcore: registered new device driver usb
- [ 0.260207] pps_core: LinuxPPS API ver. 1 registered
- [ 0.260207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.260207] PTP clock support registered
- [ 0.260207] EDAC MC: Ver: 3.0.0
- [ 0.260207] efivars: Registered efivars operations
- [ 0.260207] NetLabel: Initializing
- [ 0.260207] NetLabel: domain hash size = 128
- [ 0.260207] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.260207] NetLabel: unlabeled traffic allowed by default
- [ 0.260207] mctp: management component transport protocol core
- [ 0.260207] NET: Registered PF_MCTP protocol family
- [ 0.260207] PCI: Using ACPI for IRQ routing
- [ 0.290569] PCI: pci_cache_line_size set to 64 bytes
- [ 0.290910] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
- [ 0.290913] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
- [ 0.290915] e820: reserve RAM buffer [mem 0x7369c000-0x73ffffff]
- [ 0.290917] e820: reserve RAM buffer [mem 0x7377a000-0x73ffffff]
- [ 0.290918] e820: reserve RAM buffer [mem 0x7a8ea000-0x7bffffff]
- [ 0.290920] e820: reserve RAM buffer [mem 0x8a28f000-0x8bffffff]
- [ 0.290921] e820: reserve RAM buffer [mem 0x8af00000-0x8bffffff]
- [ 0.290923] e820: reserve RAM buffer [mem 0x26e000000-0x26fffffff]
- [ 0.290989] pci 0000:00:02.0: vgaarb: setting as boot VGA device
- [ 0.290989] pci 0000:00:02.0: vgaarb: bridge control possible
- [ 0.290989] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.290989] vgaarb: loaded
- [ 0.290989] clocksource: Switched to clocksource tsc-early
- [ 0.290989] VFS: Disk quotas dquot_6.6.0
- [ 0.290989] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.290989] pnp: PnP ACPI init
- [ 0.290989] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
- [ 0.290989] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
- [ 0.290989] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
- [ 0.290989] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
- [ 0.290989] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
- [ 0.290989] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
- [ 0.290989] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
- [ 0.290989] system 00:01: [io 0x2000-0x20fe] has been reserved
- [ 0.290989] system 00:02: [io 0x0680-0x069f] has been reserved
- [ 0.290989] system 00:02: [io 0xffff] has been reserved
- [ 0.290989] system 00:02: [io 0xffff] has been reserved
- [ 0.290989] system 00:02: [io 0xffff] has been reserved
- [ 0.290989] system 00:02: [io 0x1800-0x18fe] has been reserved
- [ 0.290989] system 00:02: [io 0x164e-0x164f] has been reserved
- [ 0.291010] system 00:04: [io 0x1854-0x1857] has been reserved
- [ 0.292563] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
- [ 0.292571] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
- [ 0.292577] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
- [ 0.292582] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
- [ 0.292587] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
- [ 0.293337] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.293343] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.293349] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.293354] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.293360] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.293371] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 0.293377] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
- [ 0.293383] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.293388] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.293394] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved
- [ 0.293959] pnp: PnP ACPI: found 9 devices
- [ 0.300282] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.300347] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000
- [ 0.300414] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit]
- [ 0.300762] NET: Registered PF_INET protocol family
- [ 0.300857] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.302710] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
- [ 0.302726] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.302748] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.302825] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
- [ 0.303208] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.303288] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
- [ 0.303318] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
- [ 0.303341] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
- [ 0.303422] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.303434] NET: Registered PF_XDP protocol family
- [ 0.303442] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
- [ 0.303451] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
- [ 0.303459] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
- [ 0.303473] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
- [ 0.303481] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
- [ 0.303489] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
- [ 0.303495] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.303504] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
- [ 0.303514] pci 0000:00:1c.0: bridge window [mem 0x90100000-0x902fffff]
- [ 0.303523] pci 0000:00:1c.0: bridge window [mem 0x90300000-0x904fffff 64bit pref]
- [ 0.303534] pci 0000:00:1c.3: PCI bridge to [bus 02]
- [ 0.303543] pci 0000:00:1c.3: bridge window [mem 0xb1000000-0xb11fffff]
- [ 0.303556] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.303561] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.303566] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
- [ 0.303571] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
- [ 0.303576] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
- [ 0.303581] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
- [ 0.303586] pci_bus 0000:01: resource 1 [mem 0x90100000-0x902fffff]
- [ 0.303590] pci_bus 0000:01: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
- [ 0.303596] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb11fffff]
- [ 0.305792] PCI: CLS 64 bytes, default 64
- [ 0.305807] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
- [ 0.305815] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
- [ 0.305829] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.305834] software IO TLB: mapped [mem 0x0000000085cd7000-0x0000000089cd7000] (64MB)
- [ 0.305848] Trying to unpack rootfs image as initramfs...
- [ 0.310778] Initialise system trusted keyrings
- [ 0.310797] Key type blacklist registered
- [ 0.310847] workingset: timestamp_bits=36 max_order=21 bucket_order=0
- [ 0.310873] zbud: loaded
- [ 0.311298] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
- [ 0.311561] integrity: Platform Keyring initialized
- [ 0.311568] integrity: Machine keyring initialized
- [ 0.329008] NET: Registered PF_ALG protocol family
- [ 0.329020] xor: automatically using best checksumming function avx
- [ 0.329027] Key type asymmetric registered
- [ 0.329030] Asymmetric key parser 'x509' registered
- [ 0.329061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.329151] io scheduler mq-deadline registered
- [ 0.329157] io scheduler kyber registered
- [ 0.329174] io scheduler bfq registered
- [ 0.329320] atomic64_test: passed for x86-64 platform with CX8 and with SSE
- [ 0.329731] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
- [ 0.329774] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
- [ 0.330212] pcieport 0000:00:1c.3: PME: Signaling with IRQ 123
- [ 0.330338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 0.331058] ACPI: AC: AC Adapter [AC0] (off-line)
- [ 0.331151] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
- [ 0.331179] ACPI: button: Power Button [PWRB]
- [ 0.331215] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input1
- [ 0.331252] ACPI: button: Sleep Button [SLPB]
- [ 0.331289] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input2
- [ 0.331313] ACPI: button: Sleep Button [SLPB]
- [ 0.331349] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
- [ 0.331372] ACPI: button: Lid Switch [LID]
- [ 0.332411] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.332419] ACPI: thermal: Thermal Zone [THRM] (29 C)
- [ 0.332658] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.335294] hpet_acpi_add: no address or irqs in _CRS
- [ 0.335367] Non-volatile memory driver v1.3
- [ 0.335377] Linux agpgart interface v0.103
- [ 0.335557] tpm_crb MSFT0101:00: can't request region for resource [mem 0x8ae59000-0x8ae5902f]
- [ 0.335566] tpm_crb: probe of MSFT0101:00 failed with error -16
- [ 0.335614] ACPI: bus type drm_connector registered
- [ 0.336154] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
- [ 0.344936] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
- [ 0.351255] ahci 0000:00:17.0: version 3.0
- [ 0.351501] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
- [ 0.351512] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
- [ 0.351807] scsi host0: ahci
- [ 0.351937] scsi host1: ahci
- [ 0.351985] ata1: DUMMY
- [ 0.351993] ata2: SATA max UDMA/133 abar m2048@0xb122e000 port 0xb122e180 irq 124 lpm-pol 3
- [ 0.352486] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.352538] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- [ 0.353652] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
- [ 0.354151] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.354206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 0.354220] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
- [ 0.354307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
- [ 0.354316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.354322] usb usb1: Product: xHCI Host Controller
- [ 0.354326] usb usb1: Manufacturer: Linux 6.7.5-gentoo-dist xhci-hcd
- [ 0.354331] usb usb1: SerialNumber: 0000:00:14.0
- [ 0.354495] hub 1-0:1.0: USB hub found
- [ 0.354524] hub 1-0:1.0: 12 ports detected
- [ 0.356215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
- [ 0.356225] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.356231] usb usb2: Product: xHCI Host Controller
- [ 0.356235] usb usb2: Manufacturer: Linux 6.7.5-gentoo-dist xhci-hcd
- [ 0.356240] usb usb2: SerialNumber: 0000:00:14.0
- [ 0.356385] hub 2-0:1.0: USB hub found
- [ 0.356409] hub 2-0:1.0: 6 ports detected
- [ 0.356929] usb: port power management may be unreliable
- [ 0.357372] usbcore: registered new interface driver usbserial_generic
- [ 0.357382] usbserial: USB Serial support registered for generic
- [ 0.357434] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.360234] ACPI: battery: Slot [BAT0] (battery present)
- [ 0.361561] i8042: Detected active multiplexing controller, rev 1.1
- [ 0.363526] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.363537] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.363585] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.363612] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.363637] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.363739] mousedev: PS/2 mouse device common for all mice
- [ 0.363937] rtc_cmos 00:03: RTC can wake from S4
- [ 0.364667] rtc_cmos 00:03: registered as rtc0
- [ 0.364805] rtc_cmos 00:03: setting system clock to 2024-02-17T17:17:38 UTC (1708190258)
- [ 0.364846] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
- [ 0.365200] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
- [ 0.365229] device-mapper: uevent: version 1.0.3
- [ 0.365289] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
- [ 0.365356] intel_pstate: Intel P-state driver initializing
- [ 0.365551] intel_pstate: HWP enabled
- [ 0.365712] efifb: probing for efifb
- [ 0.365727] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
- [ 0.365732] efifb: mode is 1920x1080x32, linelength=7680, pages=1
- [ 0.365736] efifb: scrolling: redraw
- [ 0.365738] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.365799] Console: switching to colour frame buffer device 240x67
- [ 0.366262] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.367496] fb0: EFI VGA frame buffer device
- [ 0.367549] hid: raw HID events driver (C) Jiri Kosina
- [ 0.367584] usbcore: registered new interface driver usbhid
- [ 0.367595] usbhid: USB HID core driver
- [ 0.367700] intel_pmc_core intel_pmc_core.0: initialized
- [ 0.367845] drop_monitor: Initializing network drop monitor service
- [ 0.367937] Initializing XFRM netlink socket
- [ 0.367965] NET: Registered PF_INET6 protocol family
- [ 0.393808] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.393833] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.595390] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.595427] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.603437] usb 1-2: new full-speed USB device number 2 using xhci_hcd
- [ 0.621707] Freeing initrd memory: 66644K
- [ 0.626954] Segment Routing with IPv6
- [ 0.626966] RPL Segment Routing with IPv6
- [ 0.626985] In-situ OAM (IOAM) with IPv6
- [ 0.627032] mip6: Mobile IPv6
- [ 0.627043] NET: Registered PF_PACKET protocol family
- [ 0.627440] microcode: Current revision: 0x000000f0
- [ 0.627451] microcode: Updated early from: 0x000000c2
- [ 0.627623] IPI shorthand broadcast: enabled
- [ 0.627642] AVX2 version of gcm_enc/dec engaged.
- [ 0.627755] AES CTR mode by8 optimization enabled
- [ 0.629894] sched_clock: Marking stable (620896881, 6694570)->(680250583, -52659132)
- [ 0.630096] registered taskstats version 1
- [ 0.630331] Loading compiled-in X.509 certificates
- [ 0.630961] Loaded X.509 cert 'Gentoo Linux: Distribution Kernel Signing Key: c3aaa779efbdcf321e7d5b89033ee251722fd93b'
- [ 0.633859] page_owner is disabled
- [ 0.633983] Key type .fscrypt registered
- [ 0.633993] Key type fscrypt-provisioning registered
- [ 0.634397] Btrfs loaded, zoned=yes, fsverity=yes
- [ 0.634419] Key type big_key registered
- [ 0.646828] Key type encrypted registered
- [ 0.648280] ima: No TPM chip found, activating TPM-bypass!
- [ 0.648297] Loading compiled-in module X.509 certificates
- [ 0.648834] Loaded X.509 cert 'Gentoo Linux: Distribution Kernel Signing Key: c3aaa779efbdcf321e7d5b89033ee251722fd93b'
- [ 0.648852] ima: Allocated hash algorithm: sha256
- [ 0.648869] ima: No architecture policies found
- [ 0.648896] evm: Initialising EVM extended attributes:
- [ 0.648905] evm: security.selinux
- [ 0.649400] evm: security.SMACK64 (disabled)
- [ 0.649885] evm: security.SMACK64EXEC (disabled)
- [ 0.650379] evm: security.SMACK64TRANSMUTE (disabled)
- [ 0.650881] evm: security.SMACK64MMAP (disabled)
- [ 0.651350] evm: security.apparmor
- [ 0.651819] evm: security.ima
- [ 0.652284] evm: security.capability
- [ 0.652747] evm: HMAC attrs: 0x1
- [ 0.653336] PM: Magic number: 12:774:289
- [ 0.653857] tty tty22: hash matches
- [ 0.654590] hid_bpf: error while preloading HID BPF dispatcher: -22
- [ 0.654597] RAS: Correctable Errors collector initialized.
- [ 0.655533] clk: Disabling unused clocks
- [ 0.663542] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.667784] ata2.00: ATA-8: LITEON CV3-8D256, T881202, max UDMA/133
- [ 0.668359] ata2.00: 500118192 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 0.669293] ata2.00: Features: Dev-Sleep
- [ 0.670174] ata2.00: configured for UDMA/133
- [ 0.670642] ahci 0000:00:17.0: port does not support device sleep
- [ 0.671317] scsi 1:0:0:0: Direct-Access ATA LITEON CV3-8D256 202 PQ: 0 ANSI: 5
- [ 0.672065] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 0.672132] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
- [ 0.673122] sd 1:0:0:0: [sda] Write Protect is off
- [ 0.673615] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.673626] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.674129] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
- [ 0.677010] sda: sda1 sda2
- [ 0.677875] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 0.679648] Freeing unused decrypted memory: 2028K
- [ 0.680774] Freeing unused kernel image (initmem) memory: 4620K
- [ 0.713636] Write protecting the kernel read-only data: 30720k
- [ 0.715274] Freeing unused kernel image (rodata/data gap) memory: 1012K
- [ 0.793589] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 0.794062] x86/mm: Checking user space page tables
- [ 0.800068] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 0.800591] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 0.812223] usb 1-2: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
- [ 0.812738] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 0.813223] usb 1-2: Product: 2.4G Mouse
- [ 0.816664] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1EA7:0064.0001/input/input8
- [ 0.817225] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1EA7:0064.0001/input/input9
- [ 0.817800] hid-generic 0003:1EA7:0064.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-2/input0
- [ 0.849431] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 0.849939] Run /init as init process
- [ 0.850476] with arguments:
- [ 0.850477] /init
- [ 0.850478] with environment:
- [ 0.850479] HOME=/
- [ 0.850480] TERM=linux
- [ 0.850481] BOOT_IMAGE=/vmlinuz-6.7.5-gentoo-dist
- [ 0.918665] dracut: Gentoo-2.14
- [ 0.943445] usb 1-5: new full-speed USB device number 3 using xhci_hcd
- [ 1.002038] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.002569] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.084914] usb 1-5: New USB device found, idVendor=04ca, idProduct=3016, bcdDevice= 0.01
- [ 1.085455] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.213394] usb 1-6: new full-speed USB device number 4 using xhci_hcd
- [ 1.215389] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.215903] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.310047] tsc: Refined TSC clocksource calibration: 2399.999 MHz
- [ 1.310989] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
- [ 1.311870] clocksource: Switched to clocksource tsc
- [ 1.355822] usb 1-6: New USB device found, idVendor=1c7a, idProduct=0570, bcdDevice=10.41
- [ 1.356380] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.356931] usb 1-6: Product: EgisTec Touch Fingerprint Sensor
- [ 1.357472] usb 1-6: Manufacturer: EgisTec
- [ 1.358006] usb 1-6: SerialNumber: G0012942
- [ 1.367398] input: ELAN0501:00 04F3:3037 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0501:00/0018:04F3:3037.0002/input/input13
- [ 1.368083] input: ELAN0501:00 04F3:3037 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0501:00/0018:04F3:3037.0002/input/input14
- [ 1.368786] hid-generic 0018:04F3:3037.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3037] on i2c-ELAN0501:00
- [ 1.418906] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
- [ 1.420199] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
- [ 1.475680] input: ELAN0501:00 04F3:3037 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0501:00/0018:04F3:3037.0002/input/input16
- [ 1.476392] input: ELAN0501:00 04F3:3037 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0501:00/0018:04F3:3037.0002/input/input17
- [ 1.477087] hid-multitouch 0018:04F3:3037.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3037] on i2c-ELAN0501:00
- [ 1.480059] usb 1-7: new high-speed USB device number 5 using xhci_hcd
- [ 1.628881] usb 1-7: New USB device found, idVendor=04f2, idProduct=b573, bcdDevice=92.01
- [ 1.630874] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.632675] usb 1-7: Product: HD WebCam
- [ 1.634497] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
- [ 1.760066] usb 1-8: new high-speed USB device number 6 using xhci_hcd
- [ 1.901706] usb 1-8: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
- [ 1.903848] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.905908] usb 1-8: Product: USB2.0-CRW
- [ 1.907989] usb 1-8: Manufacturer: Generic
- [ 1.910054] usb 1-8: SerialNumber: 20100201396000000
- [ 1.927408] usbcore: registered new interface driver rtsx_usb
- [ 1.976248] BTRFS: device fsid 43293a53-c4b2-4d0b-b28a-abddb8465ee0 devid 1 transid 2826 /dev/sda2 scanned by mount (374)
- [ 1.977639] BTRFS info (device sda2): first mount of filesystem 43293a53-c4b2-4d0b-b28a-abddb8465ee0
- [ 1.978371] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm
- [ 1.979013] BTRFS info (device sda2): using free space tree
- [ 2.017890] BTRFS info (device sda2): enabling ssd optimizations
- [ 2.018541] BTRFS info (device sda2): auto enabling async discard
- [ 2.056918] dracut: Remounting /dev/disk/by-uuid/43293a53-c4b2-4d0b-b28a-abddb8465ee0 with -o compress=zstd:9,relatime,ro
- [ 2.058953] BTRFS info (device sda2: state M): use zstd compression, level 9
- [ 2.082661] dracut: Mounted root filesystem /dev/sda2
- [ 2.151041] dracut: Switching root
- [ 2.204728] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x4d5f03)
- [ 2.218296] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x16, 0x10.
- [ 2.233689] psmouse serio4: elantech: Elan sample query result 00, 25, 75
- [ 2.306661] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input18
- [ 3.337544] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
- [ 3.470989] idma64 idma64.0: Found Intel integrated DMA 64-bit
- [ 3.486990] idma64 idma64.1: Found Intel integrated DMA 64-bit
- [ 3.536483] msr: Write to unrecognized MSR 0x150 by intel-undervolt (pid: 1101).
- [ 3.536488] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.
- [ 3.602283] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
- [ 3.611245] i2c i2c-2: 2/4 memory slots populated (from DMI)
- [ 3.622526] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 3.622833] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 3.623120] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
- [ 3.623136] Loading firmware: regulatory.db
- [ 3.629639] Loading firmware: regulatory.db.p7s
- [ 3.653258] input: PC Speaker as /devices/platform/pcspkr/input/input19
- [ 3.955624] acer_wmi: Acer Laptop ACPI-WMI Extras
- [ 3.955673] acer_wmi: Function bitmap for Communication Button: 0x801
- [ 3.967907] Console: switching to colour dummy device 80x25
- [ 3.967975] i915 0000:00:02.0: vgaarb: deactivate vga console
- [ 3.970321] input: Acer WMI hotkeys as /devices/virtual/input/input20
- [ 3.985228] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
- [ 3.985233] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 3.985235] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 3.985236] RAPL PMU: hw unit of domain dram 2^-14 Joules
- [ 3.985237] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 4.001141] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 4.001167] Loading firmware: i915/skl_dmc_ver1_27.bin
- [ 4.012274] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
- [ 4.030867] iTCO_vendor_support: vendor-support=0
- [ 4.050478] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
- [ 4.050485] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
- [ 4.051042] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
- [ 4.054424] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 4.093024] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
- [ 4.128200] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 4.131104] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
- [ 4.133221] i915 display info: display version: 9
- [ 4.133226] i915 display info: cursor_needs_physical: no
- [ 4.133228] i915 display info: has_cdclk_crawl: no
- [ 4.133230] i915 display info: has_cdclk_squash: no
- [ 4.133231] i915 display info: has_ddi: yes
- [ 4.133233] i915 display info: has_dp_mst: yes
- [ 4.133234] i915 display info: has_dsb: no
- [ 4.133236] i915 display info: has_fpga_dbg: yes
- [ 4.133237] i915 display info: has_gmch: no
- [ 4.133239] i915 display info: has_hotplug: yes
- [ 4.133240] i915 display info: has_hti: no
- [ 4.133241] i915 display info: has_ipc: yes
- [ 4.133243] i915 display info: has_overlay: no
- [ 4.133244] i915 display info: has_psr: yes
- [ 4.133246] i915 display info: has_psr_hw_tracking: yes
- [ 4.133247] i915 display info: overlay_needs_physical: no
- [ 4.133249] i915 display info: supports_tv: no
- [ 4.133250] i915 display info: has_hdcp: yes
- [ 4.133252] i915 display info: has_dmc: yes
- [ 4.133253] i915 display info: has_dsc: no
- [ 4.194654] BTRFS warning (device sda2: state M): excessive commit interval 600
- [ 4.200172] fbcon: i915drmfb (fb0) is primary device
- [ 4.206449] Console: switching to colour frame buffer device 240x67
- [ 4.224460] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
- [ 4.265549] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 4.279861] intel_tcc_cooling: Programmable TCC Offset detected
- [ 4.284844] intel_rapl_common: Found RAPL domain package
- [ 4.284849] intel_rapl_common: Found RAPL domain core
- [ 4.284851] intel_rapl_common: Found RAPL domain uncore
- [ 4.284852] intel_rapl_common: Found RAPL domain dram
- [ 4.324251] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_fence_ops [i915])
- [ 4.413720] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- [ 4.413730] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 4.413734] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- [ 4.413737] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 4.413739] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 4.413741] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
- [ 4.413744] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
- [ 4.484709] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
- [ 4.484794] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
- [ 4.484867] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
- [ 4.484935] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
- [ 4.528003] Loading firmware: ath10k/pre-cal-pci-0000:02:00.0.bin
- [ 4.528438] Loading firmware: ath10k/cal-pci-0000:02:00.0.bin
- [ 4.528469] Loading firmware: ath10k/QCA6174/hw3.0/firmware-6.bin
- [ 4.537720] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 11ad:0807
- [ 4.537727] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
- [ 4.538281] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
- [ 4.604074] Loading firmware: ath10k/QCA6174/hw3.0/board-2.bin
- [ 4.609705] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
- [ 4.712560] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 4.789320] ath: EEPROM regdomain: 0x6c
- [ 4.789327] ath: EEPROM indicates we should expect a direct regpair map
- [ 4.789329] ath: Country alpha2 being used: 00
- [ 4.789330] ath: Regpair used: 0x6c
- [ 4.795181] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
- [ 4.845734] mc: Linux media interface: v0.10
- [ 4.865106] videodev: Linux video capture interface: v2.00
- [ 4.884871] Bluetooth: Core ver 2.22
- [ 4.884891] NET: Registered PF_BLUETOOTH protocol family
- [ 4.884893] Bluetooth: HCI device and connection manager initialized
- [ 4.884898] Bluetooth: HCI socket layer initialized
- [ 4.884900] Bluetooth: L2CAP socket layer initialized
- [ 4.884904] Bluetooth: SCO socket layer initialized
- [ 5.033936] usbcore: registered new interface driver btusb
- [ 5.034461] Loading firmware: qca/rampatch_usb_00000302.bin
- [ 5.037926] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
- [ 5.037932] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
- [ 5.045060] usb 1-7: Found UVC 1.00 device HD WebCam (04f2:b573)
- [ 5.072013] usbcore: registered new interface driver uvcvideo
- [ 5.399719] Loading firmware: qca/nvm_usb_00000302.bin
- [ 5.399866] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
- [ 5.425197] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
- [ 5.546656] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.551434] ata2.00: configured for UDMA/133
- [ 5.551463] ahci 0000:00:17.0: port does not support device sleep
- [ 5.569011] BTRFS warning (device sda2: state M): excessive commit interval 600
- [ 5.896844] zram: Added device: zram0
- [ 5.943940] zram0: detected capacity change from 0 to 12484608
- [ 6.012723] Adding 6242300k swap on /dev/zram0. Priority:16383 extents:1 across:6242300k SSDsc
- [ 6.058511] elogind-daemon[3566]: New seat seat0.
- [ 6.060837] elogind-daemon[3566]: Watching system buttons on /dev/input/event0 (Power Button)
- [ 6.060963] elogind-daemon[3566]: Watching system buttons on /dev/input/event1 (Sleep Button)
- [ 6.080201] elogind-daemon[3566]: Watching system buttons on /dev/input/event3 (Lid Switch)
- [ 6.080362] elogind-daemon[3566]: Watching system buttons on /dev/input/event2 (Sleep Button)
- [ 6.081288] elogind-daemon[3566]: Watching system buttons on /dev/input/event4 (AT Translated Set 2 keyboard)
- [ 6.081401] elogind-daemon[3566]: Watching system buttons on /dev/input/event11 (Acer WMI hotkeys)
- [ 6.109140] BTRFS warning (device sda2: state M): excessive commit interval 600
- [ 6.429994] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 6.429998] Bluetooth: BNEP filters: protocol multicast
- [ 6.430004] Bluetooth: BNEP socket layer initialized
- [ 6.437095] Bluetooth: MGMT ver 1.22
- [ 6.509726] 8021q: 802.1Q VLAN Support v1.8
- [ 7.257338] NET: Registered PF_QIPCRTR protocol family
- [ 9.563700] elogind-daemon[3566]: New session 1 of user rene.
- [ 10.291828] fuse: init (API version 7.39)
- [ 13.996351] Bluetooth: RFCOMM TTY layer initialized
- [ 13.996359] Bluetooth: RFCOMM socket layer initialized
- [ 13.996362] Bluetooth: RFCOMM ver 1.11
- [ 18.191414] wlp2s0: authenticate with 2c:3a:fd:85:96:3d (local address=94:e9:79:73:8a:5b)
- [ 18.191419] wlp2s0: send auth to 2c:3a:fd:85:96:3d (try 1/3)
- [ 18.665790] wlp2s0: authenticate with 2c:3a:fd:85:96:3d (local address=94:e9:79:73:8a:5b)
- [ 18.665804] wlp2s0: send auth to 2c:3a:fd:85:96:3d (try 1/3)
- [ 18.764229] wlp2s0: authenticated
- [ 18.766673] wlp2s0: associate with 2c:3a:fd:85:96:3d (try 1/3)
- [ 18.770564] wlp2s0: RX AssocResp from 2c:3a:fd:85:96:3d (capab=0x1511 status=0 aid=4)
- [ 18.774118] wlp2s0: associated
- [ 18.774355] ath: EEPROM regdomain: 0x8114
- [ 18.774365] ath: EEPROM indicates we should expect a country code
- [ 18.774369] ath: doing EEPROM country->regdmn map search
- [ 18.774375] ath: country maps to regdmn code: 0x37
- [ 18.774380] ath: Country alpha2 being used: DE
- [ 18.774385] ath: Regpair used: 0x37
- [ 18.774389] ath: regdomain 0x8114 dynamically updated by country element
- [ 18.870204] wlp2s0: Limiting TX power to 23 (30 - 7) dBm as advertised by 2c:3a:fd:85:96:3d
- [ 27.712149] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Add Comment
Please, Sign In to add comment