Building in release mode
Checking size .pio\build\bluepill_f103c8\firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM:   [====      ]  41.1% (used 8424 bytes from 20480 bytes)
Flash: [========  ]  79.2% (used 51904 bytes from 65536 bytes)
Configuring upload protocol...
AVAILABLE: blackmagic, cmsis-dap, dfu, jlink, mbed, stlink
CURRENT: upload_protocol = stlink
Uploading .pio\build\bluepill_f103c8\firmware.elf
xPack OpenOCD, x86_64 Open On-Chip Debugger 0.10.0+dev-00378-ge5be992df (2020-06-26-09:29)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 1

0x2ba01477
hla_swd
none separate

target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08000188 msp: 0x20000688
** Programming Started **
Warn : STM32 flash size failed, probe inaccurate - assuming 128k flash
** Programming Finished **
** Verify Started **
Error: timed out while waiting for target halted
Error: error executing cortex_m crc algorithm
embedded:startup.tcl:521: Error: ** Verify Failed **
in procedure 'program'
in procedure 'program_error' called at file "embedded:startup.tcl", line 582
at file "embedded:startup.tcl", line 521
*** [upload] Error 1
================================================================================================= [FAILED] Took 117.36 seconds =================================================================================================
The terminal process "C:\Users\AlexPerez\.platformio\penv\Scripts\platformio.exe 'run', '--target', 'upload', '--environment', 'bluepill_f103c8'" terminated with exit code: 1.

Terminal will be reused by tasks, press any key to close it.