Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@____ ~]# ckermit
- Removing stale lock /var/lock/LCK..ttyUSB0 (pid 2542 terminated)
- Connecting to /dev/ttyUSB0, speed 115200
- Escape character: Ctrl-\ (ASCII 28, FS): enabled
- Type the escape character followed by C to get back,
- or followed by ? to see other options.
- ----------------------------------------------------
- 0.0;
- TE: 51863239
- BL2 Built : 13:48:56, Sep 23 2016.
- gxl g7459bd4 - jianxin.pan@droid06
- set vcck to 1120 mv
- set vddee to 1000 mv
- Board ID = 6
- CPU clk: 1200MHz
- BL2 USB
- DQS-corr enabled
- DDR scramble enabled
- DDR3 chl: Rank0+1 @ 768MHz - PASS
- Rank0: 1024MB(auto)-2T-11
- Rank1: 1024MB(auto)-2T-11
- 0.0;
- TE: 51989546
- BL2 Built : 13:48:56, Sep 23 2016.
- gxl g7459bd4 - jianxin.pan@droid06
- set vcck to 1120 mv
- set vddee to 1000 mv
- Board ID = 6
- CPU clk: 1200MHz
- BL2 USB
- 0.0;
- TE: 52039010
- BL2 Built : 13:48:56, Sep 23 2016.
- gxl g7459bd4 - jianxin.pan@droid06
- set vcck to 1120 mv
- set vddee to 1000 mv
- Board ID = 6
- CPU clk: 1200MHz
- BL2 USB
- Load fip header from USB, src: 0x0000c000, des: 0x01400000, size: 0x00004000
- New fip structure!
- Load bl30 from USB, src: 0x00010000, des: 0x01100000, size: 0x0000d600
- Load bl31 from USB, src: 0x00020000, des: 0x10100000, size: 0x00015400
- Load bl33 from USB, src: 0x00038000, des: 0x01000000, size: 0x000a3800
- NOTICE: BL3-1: v1.0(debug):fb68908
- NOTICE: BL3-1: Built : 18:30:11, Nov 1 2016
- aml log : bl31 normal boot !
- [Image: gxl_v1.1.3154-065f772 2016-09-29 14:08:54 yan.wang@droid05]
- OPS=0x82
- e2 a0 1 a7 87 16 68 d fb 59 4 21 [52.306633 Inits done]
- secure task start!
- high task start!
- low task start!
- INFO: BL3-1: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x1000000
- INFO: BL3-1: Next image spsr = 0x3c9
- U-Boot 2015.01-g52d10ef (Jul 09 2017 - 22:03:20)
- DRAM: 2 GiB
- Relocation Offset is: 76ed1000
- InUsbBurn
- [MSG]sof
- Set Addr 1
- Get DT cfg
- Get str 3ee
- USBErr:361Error string id!
- "Synchronous Abort" handler, esr 0x96000210
- ELR: 77efb64c
- LR: 77efb644
- x0 : 0000000000000000 x1 : 0000000000000000
- x2 : 0000000000000301 x3 : 0000000000000001
- x4 : 0000000073ec0960 x5 : ffffff80ffffffc8
- x6 : 0000000000000000 x7 : 0000000000000006
- x8 : 0000000000000000 x9 : 0000000000000000
- x10: 0000000000000000 x11: 0000000000000000
- x12: 0000000000000000 x13: 0000000000000000
- x14: 0000000000000000 x15: 0000000000000000
- x16: 0000000000000000 x17: 0000000000000000
- x18: 0000000073ec0e28 x19: 0000000077f89a40
- x20: 0000000073ec0d08 x21: 0000000000000012
- x22: 00000000000000ee x23: 0000000000000000
- x24: 00000000c9100814 x25: 00000000c9100010
- x26: 00000000c9100b08 x27: 0000000000000000
- x28: 0000000000000000 x29: 0000000073ec0ca0
- Resetting CPU ...
- resetting ...
- GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
- TE: 101001
- BL2 Built : 14:02:06, Apr 18 2017.
- gxl gb6cb79d - xiaobo.gu@droid05
- set vcck to 1120 mv
- set vddee to 1000 mv
- Board ID = 6
- CPU clk: 1200MHz
- DQS-corr enabled
- DDR scramble enabled
- DDR3 chl: Rank0+1 @ 768MHz - PASS
- Rank0: 1024MB(auto)-2T-11
- Rank1: 1024MB(auto)-2T-11
- DataBus test pass!
- AddrBus test pass!
- -s
- Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
- New fip structure!
- Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
- Load bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x0001b400
- Load bl33 from eMMC, src: 0x0003c200, des: 0x01000000, size: 0x000b4200
- NOTICE: BL3-1: v1.0(debug):866a5ea
- NOTICE: BL3-1: Built : 15:50:05, Feb 28 2017
- [BL31]: GXL CPU setup!
- aml log : bl31 detect secure boot !
- mpu_config_enable:ok
- [Image: gxl_v1.1.3198-b7f9835 2017-04-17 16:15:21 yun.cai@droid06]
- OPS=0x82
- e2 a0 1 a7 87 16 68 d fb 59 4 21 [0.364010 Inits done]
- secure task start!
- high task start!
- low task start!
- INFO: BL3-1: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x1000000
- INFO: BL3-1: Next image spsr = 0x3c9
- U-Boot 2015.01-g633383b (Jun 12 2017 - 19:10:18)
- DRAM: 2 GiB
- Relocation Offset is: 76ebd000
- register usb cfg[0][1] = 0000000077f5cc10
- [CANVAS]canvas init
- vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
- vpu: clk_level = 7
- vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
- vpu: vpu_clk_gate_init_off
- vpp: vpp_init
- boot_device_flag : 1
- Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
- init bus_cycle=6, bus_timing=7, system=5.0ns
- reset failed
- get_chip_type and ret:fffffffe
- get_chip_type and ret:fffffffe
- chip detect failed and ret:fffffffe
- nandphy_init failed and ret=0xfffffff1
- MMC: aml_priv->desc_buf = 0x0000000073ebd6b0
- aml_priv->desc_buf = 0x0000000073ebf9e0
- SDIO Port B: 0, SDIO Port C: 1
- emmc/sd response timeout, cmd8, status=0x1ff2800
- emmc/sd response timeout, cmd55, status=0x1ff2800
- init_part() 293: PART_TYPE_AML
- [mmc_init] mmc init success
- dtb magic edfe0dd0
- start dts,buffer=0000000073ec2220,dt_addr=0000000073ec2220
- parts: 10
- 00: logo 0000000002000000 1
- 01: recovery 0000000002000000 1
- 02: rsv 0000000000800000 1
- 03: tee 0000000000800000 1
- 04: crypt 0000000002000000 1
- 05: misc 0000000002000000 1
- 06: boot 0000000002000000 1
- 07: system 0000000080000000 1
- 08: cache 0000000020000000 2
- 09: data ffffffffffffffff 4
- init_part() 293: PART_TYPE_AML
- eMMC/TSD partition table have been checked OK!
- check pattern success
- mmc env offset: 0x27400000
- In: serial
- Out: serial
- Err: serial
- reboot_mode=watchdog_reboot
- Unknown command 'cvbs' - try 'help'
- hpd_state=1
- set hdmitx VIC = 3
- config HPLL = 4324320
- HPLL: 0xc00002b4
- config HPLL done
- j = 1 vid_clk_div = 1
- hdmitx phy setting done
- hdmitx: set enc for VIC: 3
- rx version is 1.4 or below div=10
- hdmtix: set audio
- [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
- _verify_dtb_checksum()-917: calc 4c067eae, store 4c067eae
- _verify_dtb_checksum()-917: calc 4c067eae, store 4c067eae
- dtb_read()-1039: total valid 2
- dtb_read()-1106: do nothing
- Net: dwmac.c9410000amlkey_init() enter!
- [EFUSE_MSG]keynum is 4
- [BL31]: tee size: 0
- Start read misc partition datas!
- info->attemp_times = 0
- info->active_slot = 0
- info->slot_info[0].bootable = 1
- info->slot_info[0].online = 1
- info->slot_info[1].bootable = 0
- info->slot_info[1].online = 0
- info->attemp_times = 0
- attemp_times = 0
- active slot = 0
- wipe_data=successful
- wipe_cache=successful
- upgrade_step=2
- [OSD]load fb addr from dts
- [OSD]fb_addr for logo: 0x7f851000
- [OSD]load fb addr from dts
- [OSD]fb_addr for logo: 0x7f851000
- [CANVAS]addr=0x7f851000 width=3840, height=2160
- amlkey_init() enter!
- amlkey_init() 71: already init!
- [EFUSE_MSG]keynum is 4
- [BL31]: tee size: 0
- [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
- [KM]Error:f[key_manage_query_size]L507:key[mac] not programed yet
- [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
- gpio: pin GPIOAO_2 (gpio 102) value is 1
- Product checking: pass!
- Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
- ee_gate_off ...
- ## Booting Android Image at 0x01080000 ...
- reloc_addr =73f423d0
- copy done
- Kernel command line: buildvariant=userdebug
- load dtb from 0x1000000 ......
- Uncompressing Kernel Image ... OK
- kernel loaded at 0x01080000, end = 0x0218e438
- Loading Ramdisk to 73d42000, end 73eaa65e ... OK
- Loading Device Tree to 000000001fff2000, end 000000001ffff7de ... OK
- fdt_instaboot: no instaboot image
- Starting kernel ...
- uboot time: 1698829 us
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.14.29-g9227e7b-dirty (terry@Server) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #19 SMP PREEMPT Mon Jun 12 19:23:23 CST 2017
- [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000@0] no prop version_code
- [ 0.000000@0] bootconsole [earlycon0] enabled
- [ 0.000000@0] fdt Reserved memory table:
- [ 0.000000@0] linux,di: 0x000000007c200000 - 0x000000007e000000 (30 MiB)
- [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB
- [ 0.000000@0] linux,chunk-reserve: 0x0000000078200000 - 0x000000007c200000 (64 MiB)
- [ 0.000000@0] linux,ion-dev: 0x0000000075200000 - 0x0000000078200000 (48 MiB)
- [ 0.000000@0] linux,vdin1_cma: 0x0000000074000000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement