API tools faq
paste
Advertisement
ParkerFM01

GT500 Lethal Performance Boost Kit

ParkerFM01
Mar 14th, 2019
115
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.64 KB | None | 0 0
raw download clone embed print report
  1. [2019-03-14 14:12:27] [Output] : [English] Kaylyn Powell says: Right, let's fuckin' send it.
  2. [2019-03-14 14:13:00] [Output] : ★ Kaylyn Powell slices open the Lethal Performance branded box with the Foxbody's key,
  3. [2019-03-14 14:13:23] [Output] : ★ --thereafter pulling the instruction manual out, laying it out on the trunk of the car - ((Kaylyn Powell))
  4. [2019-03-14 14:13:30] [Output] : ★ - along with the actual contents of the box. ((Kaylyn Powell))
  5. [2019-03-14 14:14:32] [Output] : ★ Kaylyn Powell shrugs, walking around to the side of the Mustang.
  6. [2019-03-14 14:14:43] [Output] : ★ Kaylyn Powell leans in through the open roof/open window, tugging the hood release.
  7. [2019-03-14 14:14:51] [Output] : ★ The hood pops up slightly with a metallic clack. ((Kaylyn Powell))
  8. [2019-03-14 14:15:01] [Output] : ★ Kaylyn Powell walks around front, popping the latch with her right index and middle finger.
  9. [2019-03-14 14:15:08] [Output] : ★ Kaylyn Powell lifts the hood up, letting the gas struts hold it.
  10. [2019-03-14 14:17:34] [Output] : ★ Kaylyn Powell walks to the back of the car, grabbing the box and the manual.
  11. [2019-03-14 14:17:42] [Output] : ★ Kaylyn Powell carries them 'round front, setting them on the floor.
  12. [2019-03-14 14:17:49] [Output] : [English] Kaylyn Powell says: Guess we'll start with the er... Plugs.
  13. [2019-03-14 14:18:21] [Output] : ★ Kaylyn Powell refers to the manual, grabbing an 8mm socket from her relatively disorganized toolbox.
  14. [2019-03-14 14:18:56] [Output] : ★ Kaylyn Powell eventually locates a 3/4" drive ratchet, attaching said 8mm socket to it.
  15. [2019-03-14 14:19:36] [Output] : ★ Kaylyn Powell using the ratchet, she removes the two 8mm bolts holding each spark plug cover on.
  16. [2019-03-14 14:19:45] [Output] : ★ Kaylyn Powell removes each spark plug cover and pair of bolts from the engine bay -
  17. [2019-03-14 14:19:56] [Output] : ★ - setting them carefully upside-down on the roof of the ZR1 with the bolts resting - ((Kaylyn Powell))
  18. [2019-03-14 14:19:59] [Output] : ★ - ontop of them. ((Kaylyn Powell))
  19. [2019-03-14 14:20:36] [Output] : ★ Kaylyn Powell unplugs the four coil packs on the left cylinder bank, in turn removing them and -
  20. [2019-03-14 14:20:38] [Output] : ★ - setting them aside. ((Kaylyn Powell))
  21. [2019-03-14 14:20:51] [Output] : ★ Kaylyn Powell does the same for the coil packs on the right cylinder bank, removing them and setting -
  22. [2019-03-14 14:20:53] [Output] : ★ - them aside. ((Kaylyn Powell))
  23. [2019-03-14 14:22:36] [Output] : ★ Kaylyn Powell swaps out the 8mm socket for a 5/8" spark plug socket on an extension, attaching it to the -
  24. [2019-03-14 14:22:39] [Output] : ★ - ratchet. ((Kaylyn Powell))
  25. [2019-03-14 14:22:54] [Output] : ★ Kaylyn Powell removes the four left side spark plugs with a series of swift rotations from her right -
  26. [2019-03-14 14:22:57] [Output] : ★ - wrist. ((Kaylyn Powell))
  27. [2019-03-14 14:23:11] [Output] : ★ Kaylyn Powell does the same for the plugs on the opposite side of the motor, quickly removing and -
  28. [2019-03-14 14:23:18] [Output] : ★ - discarding them alongside the others. ((Kaylyn Powell))
  29. [2019-03-14 14:24:00] [Output] : ★ Kaylyn Powell grabs the box of new NGK plugs from the larger package, opening it.
  30. [2019-03-14 14:24:13] [Output] : ★ Kaylyn Powell removes each of the 8 plugs from the box.
  31. [2019-03-14 14:24:42] [Output] : ★ one-by-one, Kaylyn tightens them into the motor using the aforementioned - ((Kaylyn Powell))
  32. [2019-03-14 14:24:50] [Output] : ★ 5/8" spark plug socket and the ratchet. ((Kaylyn Powell))
  33. [2019-03-14 14:25:02] [Output] : ★ Kaylyn Powell pops each of the 8 coil backs back in--plugging them back in.
  34. [2019-03-14 14:25:30] [Output] : ★ Kaylyn Powell carefully retrieves the covers and the four 8mm bolts from the roof of the ZR1.
  35. [2019-03-14 14:25:42] [Output] : ★ Kaylyn Powell pops the two covers back in to place, carefully finger-tightening the four 8mm bolts.
  36. [2019-03-14 14:25:58] [Output] : ★ Kaylyn Powell circles the motor, tightening up the two bolts on each cylinder bank in a sequential -
  37. [2019-03-14 14:26:01] [Output] : ★ - motion - ((Kaylyn Powell))
  38. [2019-03-14 14:26:26] [Output] : ★ - using the 8mm socket from earlier.
  39. [2019-03-14 14:26:30] [Output] : [English] Kaylyn Powell says: Plugs, done. Next I guess the uh, throttle body.
  40. [2019-03-14 14:29:41] [Output] : ★ Kaylyn Powell using the 8mm socket, loosens and removes the four bolts holding the stock throttle body -
  41. [2019-03-14 14:29:46] [Output] : ★ - on to the back of the supercharger. ((Kaylyn Powell))
  42. [2019-03-14 14:29:51] [Output] : ★ Kaylyn Powell unplugs the stock throttle body.
  43. [2019-03-14 14:30:18] [Output] : ★ Kaylyn Powell picks up a flathead screwdriver from her toolbox, loosening the two hose clamps holding -
  44. [2019-03-14 14:30:25] [Output] : ★ - the intake pipe to the throttle body. ((Kaylyn Powell))
  45. [2019-03-14 14:30:33] [Output] : ★ Kaylyn Powell carefully finagles the pipe out of the way, pulling the stock -
  46. [2019-03-14 14:30:42] [Output] : ★ - throttlebody away from the supercharger and in turn out of the engine bay. ((Kaylyn Powell))
  47. [2019-03-14 14:30:54] [Output] : ★ Kaylyn Powell reaches in to the large Lethal Performance "goodie box", grabbing the box with the -
  48. [2019-03-14 14:31:05] [Output] : ★ - Whipple branding, slicing it open with the Foxbody's key. ((Kaylyn Powell))
  49. [2019-03-14 14:31:18] [Output] : ★ Kaylyn Powell removes the packaging from the Whipple 68mm throttle body.
  50. [2019-03-14 14:31:39] [Output] : ★ Kaylyn Powell places it onto the inlet on the end of the supercharger, finger tightening the four -
  51. [2019-03-14 14:31:43] [Output] : ★ - supplied 8mm bolts. ((Kaylyn Powell))
  52. [2019-03-14 14:32:28] [Output] : ★ Kaylyn Powell tightens them up using the socket in a circular pattern.
  53. [2019-03-14 14:32:34] [Output] : ★ Kaylyn Powell carefully moves the intake pipe back into place.
  54. [2019-03-14 14:32:43] [Output] : ★ Kaylyn Powell tightens the two hose clamps back up with the flathead, setting it aside after.
  55. [2019-03-14 14:32:57] [Output] : ★ Kaylyn Powell plugs the new throttle body in to the existing connection to the wiring harness -
  56. [2019-03-14 14:33:54] [Output] : ★ - patting her thighs to something that roughly resembles the beat of "Girls On Film". ((Kaylyn Powell))
  57. [2019-03-14 14:34:54] [Output] : ★ Kaylyn Powell loosens the negative battery terminal, removing it and tucking it aside the battery.
  58. [2019-03-14 14:35:10] [Output] : ★ Kaylyn Powell using a 14mm socket and a breaker bar--breaks the upper supercharger pulley bolt loose.
  59. [2019-03-14 14:35:24] [Output] : ★ Kaylyn Powell does the same for the lower, using the 14mm and the breaker bar to break the lower -
  60. [2019-03-14 14:35:27] [Output] : ★ - pulley bolt loose. ((Kaylyn Powell))
  61. [2019-03-14 14:35:38] [Output] : ★ Kaylyn Powell sets the breaker bar down, remvoing both bolts with her right hand.
  62. [2019-03-14 14:35:41] [Output] : ★ Kaylyn Powell sets them aside.
  63. [2019-03-14 14:35:58] [Output] : ★ Kaylyn Powell using the supplied pulley puller, removes the upper pulley.
  64. [2019-03-14 14:36:06] [Output] : ★ Kaylyn Powell then removes the lower pulley, setting them both aside.
  65. [2019-03-14 14:36:31] [Output] : ★ Kaylyn Powell unwraps both the new upper and lower pulley, greasing them up with the supplied lubricant.
  66. [2019-03-14 14:36:38] [Output] : ★ Kaylyn Powell reinstalls the upper pulley.
  67. [2019-03-14 14:36:44] [Output] : ★ Kaylyn Powell finger tightens the bolt.
  68. [2019-03-14 14:36:52] [Output] : ★ Kaylyn Powell grabs her torque wrench, popping the 12mm on to it.
  69. [2019-03-14 14:37:11] [Output] : ★ Kaylyn Powell sets the wrench according to the manufacturer specification listed in the manual.'
  70. [2019-03-14 14:37:21] [Output] : ★ Kaylyn Powell torques the upper supercharger pulley bolt to spec.
  71. [2019-03-14 14:38:08] [Output] : ★ Kaylyn Powell reinstalls the lower pulley, finger tightening the bolt.
  72. [2019-03-14 14:38:19] [Output] : ★ Kaylyn Powell switches the setting of the torque wrench to match that of the reccomended value for -
  73. [2019-03-14 14:38:22] [Output] : ★ - the lower pulley bolt. ((Kaylyn Powell))
  74. [2019-03-14 14:38:38] [Output] : ★ Kaylyn Powell torques it to spec.
  75. [2019-03-14 14:38:51] [Output] : ★ Kaylyn Powell carefully finagles the new supercharger belt into place around both pulleys.
  76. [2019-03-14 14:39:59] [Output] : ★ Kaylyn Powell pops the cap off the coolant tank.
  77. [2019-03-14 14:40:36] [Output] : ★ Kaylyn Powell grabs a siphon pump and a bucket, pumping any coolant near or in the reservoir into the -
  78. [2019-03-14 14:40:56] [Output] : ★ Kaylyn Powell - bucket.
  79. [2019-03-14 14:41:15] [Output] : ★ Kaylyn Powell using the 8mm, removes the two bolts holding the thermostat housing in place.
  80. [2019-03-14 14:41:32] [Output] : ★ Kaylyn Powell sets the bolts aside, carefully pulling the housing apart.
  81. [2019-03-14 14:41:39] [Output] : ★ Kaylyn Powell removes the old thermostat.
  82. [2019-03-14 14:41:51] [Output] : ★ Kaylyn Powell unboxes the new thermostat, popping an o-ring on to it.
  83. [2019-03-14 14:42:14] [Output] : ★ Kaylyn Powell pops the new thermostat into place, closing the housing.
  84. [2019-03-14 14:42:24] [Output] : ★ Kaylyn Powell tightens the two thermostat housing bolts back up.
  85. [2019-03-14 14:43:01] [Output] : ★ Kaylyn Powell places the bucket of coolant ontop of the rad support, pumping the coolant back -
  86. [2019-03-14 14:43:05] [Output] : ★ - into the reservoir. ((Kaylyn Powell))
  87. [2019-03-14 14:43:19] [Output] : ★ Kaylyn Powell pulls the siphon out of the reservoir, setting the bucket aside.
  88. [2019-03-14 14:43:30] [Output] : ★ Kaylyn Powell places the reservoir cap back on and tightens it up.
  89. [2019-03-14 14:43:45] [Output] : [English] Kaylyn Powell says: X-Pipe, and then the tune...
  90. [2019-03-14 14:43:55] [Output] : ★ Kaylyn Powell pops the negative battery terminal back on, tightening it up.
  91. [2019-03-14 14:43:58] [Output] : ★ Kaylyn Powell shuts the hood.
  92. [2019-03-14 15:02:35] [Output] : ★ Kaylyn Powell circles the car, placing the lift contact pads in the correct locations on the -
  93. [2019-03-14 15:02:46] [Output] : ★ - underside of the Mustang's unibody. ((Kaylyn Powell))
  94. [2019-03-14 15:04:23] [Output] : ★ Kaylyn Powell holds the button, raising the lift up with a loud metallic clack as it passes -
  95. [2019-03-14 15:04:26] [Output] : ★ - each set of mechanical locks. ((Kaylyn Powell))
  96. [2019-03-14 15:04:37] [Output] : ★ Kaylyn Powell sets the Mustang down on the second set, about waist-height.
  97. [2019-03-14 15:05:02] [Output] : ★ Kaylyn Powell swaps out the 8mm for an 11mm.
  98. [2019-03-14 15:05:49] [Output] : ★ Kaylyn Powell me grabs the new x-pipe, dragging it underneath the car with her as -
  99. [2019-03-14 15:05:57] [Output] : ★ - she drops to her knees and shuffles underneath the car. ((Kaylyn Powell))
  100. [2019-03-14 15:08:14] [Output] : ★ Kaylyn Powell using the ratchet, unbolts the four bolts holding the front two ports of the stock -
  101. [2019-03-14 15:08:19] [Output] : ★ - midpipe to the bottom of each header. ((Kaylyn Powell))
  102. [2019-03-14 15:08:37] [Output] : ★ Kaylyn Powell shuffles to the back of the stock midpipe, removing the four bolts holding each port to -
  103. [2019-03-14 15:08:39] [Output] : ★ - the tail pipes. ((Kaylyn Powell))
  104. [2019-03-14 15:08:54] [Output] : ★ Kaylyn Powell gently but firmly tugs on the stock midpipe, removing it from the car.
  105. [2019-03-14 15:09:05] [Output] : ★ Kaylyn Powell slowly lowers it, setting it down on the floor -- kicking it off to the side.
  106. [2019-03-14 15:09:17] [Output] : ★ Kaylyn Powell grabs the new X-Pipe, shimmying it into place.
  107. [2019-03-14 15:09:27] [Output] : ★ Kaylyn Powell finger-tightens the eight bolts.
  108. [2019-03-14 15:09:34] [Output] : ★ Kaylyn Powell tightens the front left two.
  109. [2019-03-14 15:09:39] [Output] : ★ Kaylyn Powell then tightens the front right two.
  110. [2019-03-14 15:09:45] [Output] : ★ Kaylyn Powell spins around on her arse, tightening up the rear right two.
  111. [2019-03-14 15:09:51] [Output] : ★ Kaylyn Powell tightens up the rear left two.
  112. [2019-03-14 15:09:52] [Output] : [English] Kaylyn Powell says: Great.
  113. [2019-03-14 15:09:57] [Output] : ★ Kaylyn Powell shuffles out from underneath the car.
  114. [2019-03-14 15:10:09] [Output] : ★ Kaylyn Powell raises the lift off the locks, then releasing the locks and lowering the car onto -
  115. [2019-03-14 15:10:11] [Output] : ★ - the ground. ((Kaylyn Powell))
  116. [2019-03-14 15:10:22] [Output] : ★ Kaylyn Powell pulls the lift arms out of the way.
  117. [2019-03-14 15:10:31] [Output] : ★ Kaylyn Powell grabs the tuner from the Lethal Performance box, entering the car with it.
  118. [2019-03-14 15:10:43] [Output] : ★ Kaylyn Powell plugs it into the OBD II port, mounting it beside the steering wheel with the supplied -
  119. [2019-03-14 15:10:45] [Output] : ★ - bracket. ((Kaylyn Powell))
  120. [2019-03-14 15:10:54] [Output] : ★ Kaylyn Powell twists the Key to ACC, turning on the tuner.
  121. [2019-03-14 15:11:05] [Output] : ★ Kaylyn Powell scrolls through the various menus, familiarizing herself with the UI -
  122. [2019-03-14 15:11:13] [Output] : ★ - before selecting the preset tune that she was instructed to. ((Kaylyn Powell))
  123. [2019-03-14 15:11:35] [Output] : ★ Kaylyn Powell clicks the "OK" button, overwriting the "read-only" portion of the Mustang's ECU.
  124. [2019-03-14 15:11:45] [Output] : ★ Kaylyn Powell twists the key to "OFF", leaving it for a moment.
  125. [2019-03-14 15:12:10] [Output] : ★ Kaylyn Powell shrugs, twisting and holding the key to "START" as the 5.8 Trinity V8 cranks over -
  126. [2019-03-14 15:12:14] [Output] : ★ - and fires up. ((Kaylyn Powell))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!