Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@pve21:~# dmesg
- [ 0.000000] Linux version 5.11.22-4-pve (build@proxmox) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PVE 5.11.22-8 (Fri, 27 Aug 2021 11:51:34 +0200) ()
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.22-4-pve root=/dev/mapper/pve-root ro quiet intel_iommu=on iommu=pt pcie_acs_override=downstream fsck.mode=force fsck.repair=yes mitigations=off
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Hygon HygonGenuine
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] zhaoxin Shanghai
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db41dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000db41e000-0x00000000db71dfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000db71e000-0x00000000db832fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000db833000-0x00000000dba03fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000dba04000-0x00000000dbad7fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000dbad8000-0x00000000dbb2afff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000dbb2b000-0x00000000dbb2bfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000dbb2c000-0x00000000dbbb1fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000dbbb2000-0x00000000dbffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000101fffffff] usable
- [ 0.000000] Warning: PCIe ACS overrides enabled; This may allow non-IOMMU protected peer-to-peer DMA
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] efi: EFI v2.31 by American Megatrends
- [ 0.000000] efi: ACPI 2.0=0xdb755000 SMBIOS=0xdbad6b98 ACPI=0xdb755000
- [ 0.000000] secureboot: Secure boot could not be determined (mode 0)
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.94 07/10/2018
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 3192.084 MHz processor
- [ 0.001012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.001015] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.001020] last_pfn = 0x1020000 max_arch_pfn = 0x400000000
- [ 0.001024] MTRR default type: write-back
- [ 0.001025] MTRR fixed ranges enabled:
- [ 0.001026] 00000-9FFFF write-back
- [ 0.001027] A0000-BFFFF uncachable
- [ 0.001029] C0000-D7FFF write-protect
- [ 0.001030] D8000-DFFFF uncachable
- [ 0.001031] E0000-FFFFF write-protect
- [ 0.001032] MTRR variable ranges enabled:
- [ 0.001032] 0 base 0000DC000000 mask 3FFFFC000000 uncachable
- [ 0.001035] 1 base 0000E0000000 mask 3FFFE0000000 uncachable
- [ 0.001036] 2 base 001020000000 mask 3FFFE0000000 uncachable
- [ 0.001037] 3 base 380000000000 mask 3FF000000000 uncachable
- [ 0.001039] 4 disabled
- [ 0.001040] 5 disabled
- [ 0.001040] 6 disabled
- [ 0.001041] 7 disabled
- [ 0.001042] 8 disabled
- [ 0.001042] 9 disabled
- [ 0.001134] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.001711] last_pfn = 0xdc000 max_arch_pfn = 0x400000000
- [ 0.006370] found SMP MP-table at [mem 0x000f4b60-0x000f4b6f]
- [ 0.006402] check: Scanning 1 areas for low memory corruption
- [ 0.006408] Kernel/User page tables isolation: disabled on command line.
- [ 0.006409] Using GB pages for direct mapping
- [ 0.006922] secureboot: Secure boot could not be determined (mode 0)
- [ 0.006924] RAMDISK: [mem 0x3109b000-0x34844fff]
- [ 0.006927] ACPI: Early table checksum verification disabled
- [ 0.006930] ACPI: RSDP 0x00000000DB755000 000024 (v02 HPQOEM)
- [ 0.006934] ACPI: XSDT 0x00000000DB755088 00008C (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
- [ 0.006941] ACPI: FACP 0x00000000DB75CD30 00010C (v05 HPQOEM SLIC-WKS 01072009 AMI 00010013)
- [ 0.006946] ACPI: DSDT 0x00000000DB7551A0 007B8D (v02 HPQOEM SLIC-WKS 00000394 INTL 20051117)
- [ 0.006950] ACPI: FACS 0x00000000DB9FB080 000040
- [ 0.006953] ACPI: APIC 0x00000000DB75CE40 000100 (v03 HPQOEM SLIC-WKS 01072009 AMI 00010013)
- [ 0.006956] ACPI: FPDT 0x00000000DB75CF40 000044 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
- [ 0.006959] ACPI: MCFG 0x00000000DB75CF88 00003C (v01 HPQOEM OEMMCFG. 01072009 MSFT 00000097)
- [ 0.006962] ACPI: HPET 0x00000000DB75CFC8 000038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005)
- [ 0.006965] ACPI: SSDT 0x00000000DB75D000 005913 (v01 COMPAQ WMI 00000001 MSFT 03000001)
- [ 0.006969] ACPI: SLIC 0x00000000DB762918 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
- [ 0.006972] ACPI: SSDT 0x00000000DB762A90 002A71 (v02 HPQOEM CpuDef 00004000 INTL 20051117)
- [ 0.006975] ACPI: SSDT 0x00000000DB765508 0CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
- [ 0.006979] ACPI: ASF! 0x00000000DB832888 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
- [ 0.006982] ACPI: TCPA 0x00000000DB832930 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
- [ 0.006985] ACPI: UEFI 0x00000000DB832968 000042 (v01 HPQOEM SLIC-WKS 01072009 00000000)
- [ 0.006988] ACPI: DMAR 0x00000000DB8329B0 0000A8 (v01 A M I OEMDMAR 00000001 INTL 00000001)
- [ 0.006991] ACPI: Reserving FACP table memory at [mem 0xdb75cd30-0xdb75ce3b]
- [ 0.006993] ACPI: Reserving DSDT table memory at [mem 0xdb7551a0-0xdb75cd2c]
- [ 0.006994] ACPI: Reserving FACS table memory at [mem 0xdb9fb080-0xdb9fb0bf]
- [ 0.006995] ACPI: Reserving APIC table memory at [mem 0xdb75ce40-0xdb75cf3f]
- [ 0.006996] ACPI: Reserving FPDT table memory at [mem 0xdb75cf40-0xdb75cf83]
- [ 0.006997] ACPI: Reserving MCFG table memory at [mem 0xdb75cf88-0xdb75cfc3]
- [ 0.006999] ACPI: Reserving HPET table memory at [mem 0xdb75cfc8-0xdb75cfff]
- [ 0.007000] ACPI: Reserving SSDT table memory at [mem 0xdb75d000-0xdb762912]
- [ 0.007001] ACPI: Reserving SLIC table memory at [mem 0xdb762918-0xdb762a8d]
- [ 0.007002] ACPI: Reserving SSDT table memory at [mem 0xdb762a90-0xdb765500]
- [ 0.007003] ACPI: Reserving SSDT table memory at [mem 0xdb765508-0xdb832887]
- [ 0.007004] ACPI: Reserving ASF! table memory at [mem 0xdb832888-0xdb83292c]
- [ 0.007005] ACPI: Reserving TCPA table memory at [mem 0xdb832930-0xdb832961]
- [ 0.007006] ACPI: Reserving UEFI table memory at [mem 0xdb832968-0xdb8329a9]
- [ 0.007008] ACPI: Reserving DMAR table memory at [mem 0xdb8329b0-0xdb832a57]
- [ 0.007016] ACPI: Local APIC address 0xfee00000
- [ 0.007057] No NUMA configuration found
- [ 0.007058] Faking a node at [mem 0x0000000000000000-0x000000101fffffff]
- [ 0.007068] NODE_DATA(0) allocated [mem 0x101ffd4000-0x101fffdfff]
- [ 0.007487] Zone ranges:
- [ 0.007487] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.007489] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.007491] Normal [mem 0x0000000100000000-0x000000101fffffff]
- [ 0.007493] Device empty
- [ 0.007494] Movable zone start for each node
- [ 0.007497] Early memory node ranges
- [ 0.007497] node 0: [mem 0x0000000000001000-0x000000000009ffff]
- [ 0.007499] node 0: [mem 0x0000000000100000-0x00000000db41dfff]
- [ 0.007500] node 0: [mem 0x00000000dbb2b000-0x00000000dbb2bfff]
- [ 0.007501] node 0: [mem 0x00000000dbbb2000-0x00000000dbffffff]
- [ 0.007502] node 0: [mem 0x0000000100000000-0x000000101fffffff]
- [ 0.007508] Initmem setup node 0 [mem 0x0000000000001000-0x000000101fffffff]
- [ 0.007510] On node 0 totalpages: 16758796
- [ 0.007511] DMA zone: 64 pages used for memmap
- [ 0.007512] DMA zone: 71 pages reserved
- [ 0.007513] DMA zone: 3999 pages, LIFO batch:0
- [ 0.007801] DMA zone: 28769 pages in unavailable ranges
- [ 0.007803] DMA32 zone: 13986 pages used for memmap
- [ 0.007804] DMA32 zone: 895085 pages, LIFO batch:63
- [ 0.012864] DMA32 zone: 18323 pages in unavailable ranges
- [ 0.012869] Normal zone: 247808 pages used for memmap
- [ 0.012870] Normal zone: 15859712 pages, LIFO batch:63
- [ 0.100866] ACPI: PM-Timer IO Port: 0x408
- [ 0.100873] ACPI: Local APIC address 0xfee00000
- [ 0.100882] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.100883] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.100884] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.100885] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.100886] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
- [ 0.100887] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
- [ 0.100888] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.100889] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.100889] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.100890] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- [ 0.100891] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
- [ 0.100892] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
- [ 0.100902] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.100907] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
- [ 0.100909] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.100911] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.100913] ACPI: IRQ0 used by override.
- [ 0.100914] ACPI: IRQ9 used by override.
- [ 0.100916] Using ACPI (MADT) for SMP configuration information
- [ 0.100917] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.100923] TSC deadline timer available
- [ 0.100924] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
- [ 0.100943] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.100945] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
- [ 0.100947] PM: hibernation: Registered nosave memory: [mem 0xdb41e000-0xdb71dfff]
- [ 0.100948] PM: hibernation: Registered nosave memory: [mem 0xdb71e000-0xdb832fff]
- [ 0.100949] PM: hibernation: Registered nosave memory: [mem 0xdb833000-0xdba03fff]
- [ 0.100950] PM: hibernation: Registered nosave memory: [mem 0xdba04000-0xdbad7fff]
- [ 0.100951] PM: hibernation: Registered nosave memory: [mem 0xdbad8000-0xdbb2afff]
- [ 0.100952] PM: hibernation: Registered nosave memory: [mem 0xdbb2c000-0xdbbb1fff]
- [ 0.100954] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xefffffff]
- [ 0.100955] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
- [ 0.100956] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfed1bfff]
- [ 0.100957] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
- [ 0.100957] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
- [ 0.100958] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.100960] [mem 0xdc000000-0xefffffff] available for PCI devices
- [ 0.100962] Booting paravirtualized kernel on bare hardware
- [ 0.100964] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.100973] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
- [ 0.101331] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
- [ 0.101338] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
- [ 0.101340] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
- [ 0.101377] Built 1 zonelists, mobility grouping on. Total pages: 16496867
- [ 0.101378] Policy zone: Normal
- [ 0.101380] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.22-4-pve root=/dev/mapper/pve-root ro quiet intel_iommu=on iommu=pt pcie_acs_override=downstream fsck.mode=force fsck.repair=yes mitigations=off
- [ 0.101439] DMAR: IOMMU enabled
- [ 0.105959] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
- [ 0.108147] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
- [ 0.108270] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.257181] Memory: 65633584K/67035184K available (16393K kernel code, 3454K rwdata, 9860K rodata, 2660K init, 6024K bss, 1401340K reserved, 0K cma-reserved)
- [ 0.257189] random: get_random_u64 called from __kmem_cache_create+0x29/0x550 with crng_init=0
- [ 0.257311] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
- [ 0.257324] ftrace: allocating 47006 entries in 184 pages
- [ 0.271684] ftrace: allocated 184 pages with 4 groups
- [ 0.271800] rcu: Hierarchical RCU implementation.
- [ 0.271801] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
- [ 0.271803] Rude variant of Tasks RCU enabled.
- [ 0.271804] Tracing variant of Tasks RCU enabled.
- [ 0.271804] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.271805] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
- [ 0.275341] NR_IRQS: 524544, nr_irqs: 928, preallocated irqs: 16
- [ 0.275581] Console: colour dummy device 80x25
- [ 0.275595] printk: console [tty0] enabled
- [ 0.275611] ACPI: Core revision 20201113
- [ 0.276256] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.276268] APIC: Switch to symmetric I/O mode setup
- [ 0.276270] DMAR: Host address width 46
- [ 0.276270] DMAR: DRHD base: 0x000000ee744000 flags: 0x1
- [ 0.276275] DMAR: dmar0: reg_base_addr ee744000 ver 1:0 cap d2078c106f0462 ecap f020ff
- [ 0.276277] DMAR: RMRR base: 0x000000db6eb000 end: 0x000000db719fff
- [ 0.276279] DMAR: ATSR flags: 0x0
- [ 0.276281] DMAR-IR: IOAPIC id 0 under DRHD base 0xee744000 IOMMU 0
- [ 0.276282] DMAR-IR: IOAPIC id 2 under DRHD base 0xee744000 IOMMU 0
- [ 0.276283] DMAR-IR: HPET id 0 under DRHD base 0xee744000
- [ 0.276284] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
- [ 0.276540] DMAR-IR: Enabled IRQ remapping in x2apic mode
- [ 0.276542] x2apic enabled
- [ 0.276546] Switched APIC routing to cluster x2apic.
- [ 0.277041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.296270] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0313b56d4, max_idle_ns: 440795205522 ns
- [ 0.296275] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.16 BogoMIPS (lpj=12768336)
- [ 0.296278] pid_max: default: 32768 minimum: 301
- [ 0.298775] LSM: Security Framework initializing
- [ 0.298782] Yama: becoming mindful.
- [ 0.298804] AppArmor: AppArmor initialized
- [ 0.298943] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.299053] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.299304] mce: CPU0: Thermal monitoring enabled (TM1)
- [ 0.299334] process: using mwait in idle threads
- [ 0.299336] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- [ 0.299337] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- [ 0.299340] Speculative Store Bypass: Vulnerable
- [ 0.299496] Freeing SMP alternatives memory: 40K
- [ 0.303344] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1152
- [ 0.303351] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1650 0 @ 3.20GHz (family: 0x6, model: 0x2d, stepping: 0x7)
- [ 0.303463] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 0.303471] ... version: 3
- [ 0.303472] ... bit width: 48
- [ 0.303472] ... generic registers: 4
- [ 0.303473] ... value mask: 0000ffffffffffff
- [ 0.303474] ... max period: 00007fffffffffff
- [ 0.303475] ... fixed-purpose events: 3
- [ 0.303475] ... event mask: 000000070000000f
- [ 0.303572] rcu: Hierarchical SRCU implementation.
- [ 0.304273] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.304273] smp: Bringing up secondary CPUs ...
- [ 0.304273] x86: Booting SMP configuration:
- [ 0.304273] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
- [ 0.324335] smp: Brought up 1 node, 12 CPUs
- [ 0.324335] smpboot: Max logical packages: 1
- [ 0.324335] smpboot: Total of 12 processors activated (76610.01 BogoMIPS)
- [ 0.330055] devtmpfs: initialized
- [ 0.330055] x86/mm: Memory block size: 2048MB
- [ 0.330055] PM: Registering ACPI NVS region [mem 0xdb833000-0xdba03fff] (1904640 bytes)
- [ 0.330055] PM: Registering ACPI NVS region [mem 0xdbb2c000-0xdbbb1fff] (548864 bytes)
- [ 0.330055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.330055] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
- [ 0.330055] pinctrl core: initialized pinctrl subsystem
- [ 0.330055] PM: RTC time: 19:54:58, date: 2021-09-03
- [ 0.330055] NET: Registered protocol family 16
- [ 0.330055] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
- [ 0.330055] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.330055] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.330055] audit: initializing netlink subsys (disabled)
- [ 0.330055] audit: type=2000 audit(1630698898.052:1): state=initialized audit_enabled=0 res=1
- [ 0.332397] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.332399] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.332399] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.332400] thermal_sys: Registered thermal governor 'user_space'
- [ 0.332401] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.332407] EISA bus registered
- [ 0.332418] cpuidle: using governor ladder
- [ 0.332421] cpuidle: using governor menu
- [ 0.332493] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.332494] ACPI: bus type PCI registered
- [ 0.332496] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.332571] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
- [ 0.332575] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
- [ 0.332590] PCI: Using configuration type 1 for base access
- [ 0.332647] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
- [ 0.332933] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.333421] Kprobes globally optimized
- [ 0.333425] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.333425] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.333425] ACPI: Added _OSI(Module Device)
- [ 0.333425] ACPI: Added _OSI(Processor Device)
- [ 0.333425] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.333425] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.333425] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.333425] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.333425] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
- [ 0.498232] ACPI: 4 ACPI AML tables successfully acquired and loaded
- [ 0.521764] ACPI: Interpreter enabled
- [ 0.521785] ACPI: (supports S0 S3 S4 S5)
- [ 0.521787] ACPI: Using IOAPIC for interrupt routing
- [ 0.521824] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.522424] ACPI: Enabled 5 GPEs in block 00 to 3F
- [ 0.542367] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
- [ 0.542376] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- [ 0.542581] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability LTR]
- [ 0.542677] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
- [ 0.542679] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
- [ 0.542681] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER]
- [ 0.542682] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
- [ 0.543214] PCI host bridge to bus 0000:00
- [ 0.543216] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
- [ 0.543218] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
- [ 0.543221] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
- [ 0.543223] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.543224] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
- [ 0.543225] pci_bus 0000:00: root bus resource [mem 0xec000000-0xefffffff window]
- [ 0.543227] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38007fffffff window]
- [ 0.543229] pci_bus 0000:00: root bus resource [bus 00-7f]
- [ 0.543254] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
- [ 0.543327] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 0.543442] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
- [ 0.543523] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.543673] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
- [ 0.543752] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.543894] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
- [ 0.543925] pci 0000:00:03.0: enabling Extended Tags
- [ 0.543976] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- [ 0.544108] pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
- [ 0.544124] pci 0000:00:04.0: reg 0x10: [mem 0xee73c000-0xee73ffff 64bit]
- [ 0.544263] pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
- [ 0.544278] pci 0000:00:04.1: reg 0x10: [mem 0xee738000-0xee73bfff 64bit]
- [ 0.544416] pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
- [ 0.544430] pci 0000:00:04.2: reg 0x10: [mem 0xee734000-0xee737fff 64bit]
- [ 0.544571] pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
- [ 0.544586] pci 0000:00:04.3: reg 0x10: [mem 0xee730000-0xee733fff 64bit]
- [ 0.544725] pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
- [ 0.544739] pci 0000:00:04.4: reg 0x10: [mem 0xee72c000-0xee72ffff 64bit]
- [ 0.544873] pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
- [ 0.544887] pci 0000:00:04.5: reg 0x10: [mem 0xee728000-0xee72bfff 64bit]
- [ 0.545021] pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
- [ 0.545035] pci 0000:00:04.6: reg 0x10: [mem 0xee724000-0xee727fff 64bit]
- [ 0.545172] pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
- [ 0.545186] pci 0000:00:04.7: reg 0x10: [mem 0xee720000-0xee723fff 64bit]
- [ 0.545322] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
- [ 0.545463] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
- [ 0.545589] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
- [ 0.545599] pci 0000:00:05.4: reg 0x10: [mem 0xee74a000-0xee74afff]
- [ 0.545736] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
- [ 0.545840] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
- [ 0.545972] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
- [ 0.545991] pci 0000:00:16.0: reg 0x10: [mem 0xee749000-0xee74900f 64bit]
- [ 0.546060] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.546142] pci 0000:00:16.2: [8086:1d3c] type 00 class 0x010185
- [ 0.546156] pci 0000:00:16.2: reg 0x10: [io 0xf0b0-0xf0b7]
- [ 0.546165] pci 0000:00:16.2: reg 0x14: [io 0xf0a0-0xf0a3]
- [ 0.546173] pci 0000:00:16.2: reg 0x18: [io 0xf090-0xf097]
- [ 0.546181] pci 0000:00:16.2: reg 0x1c: [io 0xf080-0xf083]
- [ 0.546189] pci 0000:00:16.2: reg 0x20: [io 0xf070-0xf07f]
- [ 0.546309] pci 0000:00:16.3: [8086:1d3d] type 00 class 0x070002
- [ 0.546322] pci 0000:00:16.3: reg 0x10: [io 0xf060-0xf067]
- [ 0.546328] pci 0000:00:16.3: reg 0x14: [mem 0xee747000-0xee747fff]
- [ 0.546465] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
- [ 0.546477] pci 0000:00:19.0: reg 0x10: [mem 0xee700000-0xee71ffff]
- [ 0.546484] pci 0000:00:19.0: reg 0x14: [mem 0xee74d000-0xee74dfff]
- [ 0.546491] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
- [ 0.546545] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.546641] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
- [ 0.546656] pci 0000:00:1a.0: reg 0x10: [mem 0xee74f000-0xee74f3ff]
- [ 0.546734] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.546833] pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
- [ 0.546847] pci 0000:00:1b.0: reg 0x10: [mem 0xee740000-0xee743fff 64bit]
- [ 0.546910] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.546998] pci 0000:00:1c.0: [8086:1d12] type 01 class 0x060400
- [ 0.547081] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.547109] pci 0000:00:1c.0: Enabling MPC IRBNCE
- [ 0.547111] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
- [ 0.547230] pci 0000:00:1c.5: [8086:1d18] type 01 class 0x060400
- [ 0.547313] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.547336] pci 0000:00:1c.5: Enabling MPC IRBNCE
- [ 0.547338] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled
- [ 0.547445] pci 0000:00:1c.6: [8086:1d14] type 01 class 0x060400
- [ 0.547528] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.547548] pci 0000:00:1c.6: Enabling MPC IRBNCE
- [ 0.547550] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
- [ 0.547659] pci 0000:00:1c.7: [8086:1d16] type 01 class 0x060400
- [ 0.547742] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 0.547762] pci 0000:00:1c.7: Enabling MPC IRBNCE
- [ 0.547764] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
- [ 0.547874] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
- [ 0.547889] pci 0000:00:1d.0: reg 0x10: [mem 0xee74e000-0xee74e3ff]
- [ 0.547966] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.548060] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- [ 0.548197] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
- [ 0.548384] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
- [ 0.548396] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7]
- [ 0.548403] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3]
- [ 0.548409] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7]
- [ 0.548416] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3]
- [ 0.548422] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
- [ 0.548429] pci 0000:00:1f.2: reg 0x24: [mem 0xee74c000-0xee74c7ff]
- [ 0.548465] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.548556] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
- [ 0.548572] pci 0000:00:1f.3: reg 0x10: [mem 0xee74b000-0xee74b0ff 64bit]
- [ 0.548590] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
- [ 0.548748] pci 0000:03:00.0: [1b4b:9230] type 00 class 0x010601
- [ 0.548758] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
- [ 0.548763] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
- [ 0.548768] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
- [ 0.548774] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
- [ 0.548779] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
- [ 0.548784] pci 0000:03:00.0: reg 0x24: [mem 0xee610000-0xee6107ff]
- [ 0.548789] pci 0000:03:00.0: reg 0x30: [mem 0xee600000-0xee60ffff pref]
- [ 0.548802] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1
- [ 0.548823] pci 0000:03:00.0: PME# supported from D3hot
- [ 0.548886] pci 0000:00:01.0: PCI bridge to [bus 03]
- [ 0.548889] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.548892] pci 0000:00:01.0: bridge window [mem 0xee600000-0xee6fffff]
- [ 0.548944] pci 0000:00:02.0: PCI bridge to [bus 05]
- [ 0.549013] pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
- [ 0.549026] pci 0000:04:00.0: reg 0x10: [mem 0xee510000-0xee513fff 64bit]
- [ 0.549050] pci 0000:04:00.0: reg 0x30: [mem 0xee500000-0xee50ffff pref]
- [ 0.549169] pci 0000:00:03.0: PCI bridge to [bus 04]
- [ 0.549174] pci 0000:00:03.0: bridge window [mem 0xee500000-0xee5fffff]
- [ 0.549247] pci 0000:02:00.0: [8086:1d6b] type 00 class 0x010700
- [ 0.549268] pci 0000:02:00.0: reg 0x10: [mem 0xefc00000-0xefc03fff 64bit pref]
- [ 0.549281] pci 0000:02:00.0: reg 0x18: [mem 0xef800000-0xefbfffff 64bit pref]
- [ 0.549290] pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
- [ 0.549316] pci 0000:02:00.0: enabling Extended Tags
- [ 0.549411] pci 0000:02:00.0: reg 0x164: [mem 0x380000000000-0x380000003fff 64bit pref]
- [ 0.549413] pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x380000000000-0x38000007bfff 64bit pref] (contains BAR0 for 31 VFs)
- [ 0.549619] pci 0000:00:11.0: PCI bridge to [bus 02]
- [ 0.549623] pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
- [ 0.549632] pci 0000:00:11.0: bridge window [mem 0xef800000-0xefcfffff 64bit pref]
- [ 0.549682] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.549989] pci 0000:06:00.0: [15b3:6750] type 00 class 0x020000
- [ 0.550271] pci 0000:06:00.0: reg 0x10: [mem 0xee200000-0xee2fffff 64bit]
- [ 0.550456] pci 0000:06:00.0: reg 0x18: [mem 0xef000000-0xef7fffff 64bit pref]
- [ 0.550813] pci 0000:06:00.0: reg 0x30: [mem 0xee100000-0xee1fffff pref]
- [ 0.551904] pci 0000:06:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.5 (capable of 32.000 Gb/s with 5.0 GT/s PCIe x8 link)
- [ 0.551987] pci 0000:00:1c.5: PCI bridge to [bus 06]
- [ 0.551992] pci 0000:00:1c.5: bridge window [mem 0xee100000-0xee2fffff]
- [ 0.551997] pci 0000:00:1c.5: bridge window [mem 0xef000000-0xef7fffff 64bit pref]
- [ 0.552048] pci 0000:00:1c.6: PCI bridge to [bus 07]
- [ 0.552126] pci 0000:08:00.0: [104c:8241] type 00 class 0x0c0330
- [ 0.552155] pci 0000:08:00.0: reg 0x10: [mem 0xee400000-0xee40ffff 64bit]
- [ 0.552174] pci 0000:08:00.0: reg 0x18: [mem 0xee410000-0xee411fff 64bit]
- [ 0.552291] pci 0000:08:00.0: supports D1 D2
- [ 0.552293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.552409] pci 0000:00:1c.7: PCI bridge to [bus 08]
- [ 0.552415] pci 0000:00:1c.7: bridge window [mem 0xee400000-0xee4fffff]
- [ 0.552434] pci_bus 0000:09: extended config space not accessible
- [ 0.552473] pci 0000:09:04.0: [1039:6326] type 00 class 0x030000
- [ 0.552489] pci 0000:09:04.0: reg 0x10: [mem 0xee800000-0xeeffffff pref]
- [ 0.552498] pci 0000:09:04.0: reg 0x14: [mem 0xee310000-0xee31ffff]
- [ 0.552509] pci 0000:09:04.0: reg 0x18: [io 0xc000-0xc07f]
- [ 0.552539] pci 0000:09:04.0: reg 0x30: [mem 0xee300000-0xee30ffff pref]
- [ 0.552551] pci 0000:09:04.0: BAR 0: assigned to efifb
- [ 0.552573] pci 0000:09:04.0: supports D2
- [ 0.552612] pci 0000:09:05.0: [11c1:5811] type 00 class 0x0c0010
- [ 0.552625] pci 0000:09:05.0: reg 0x10: [mem 0xee320000-0xee320fff]
- [ 0.552684] pci 0000:09:05.0: supports D1 D2
- [ 0.552685] pci 0000:09:05.0: PME# supported from D0 D1 D2 D3hot
- [ 0.552752] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
- [ 0.552755] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
- [ 0.552758] pci 0000:00:1e.0: bridge window [mem 0xee300000-0xee3fffff]
- [ 0.552762] pci 0000:00:1e.0: bridge window [mem 0xee800000-0xeeffffff 64bit pref]
- [ 0.552764] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
- [ 0.552765] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
- [ 0.552767] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
- [ 0.552768] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.552769] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
- [ 0.552771] pci 0000:00:1e.0: bridge window [mem 0xec000000-0xefffffff window] (subtractive decode)
- [ 0.552772] pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x38007fffffff window] (subtractive decode)
- [ 0.553474] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.553544] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.553613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
- [ 0.553681] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.553751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.553820] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.553888] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.553956] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.556296] iommu: Default domain type: Passthrough (set via kernel command line)
- [ 0.556462] SCSI subsystem initialized
- [ 0.556470] libata version 3.00 loaded.
- [ 0.556470] pci 0000:09:04.0: vgaarb: setting as boot VGA device
- [ 0.556470] pci 0000:09:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.556470] pci 0000:09:04.0: vgaarb: bridge control possible
- [ 0.556470] vgaarb: loaded
- [ 0.556470] ACPI: bus type USB registered
- [ 0.556470] usbcore: registered new interface driver usbfs
- [ 0.556470] usbcore: registered new interface driver hub
- [ 0.556470] usbcore: registered new device driver usb
- [ 0.556470] pps_core: LinuxPPS API ver. 1 registered
- [ 0.556470] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
- [ 0.556470] PTP clock support registered
- [ 0.556470] EDAC MC: Ver: 3.0.0
- [ 0.560306] Registered efivars operations
- [ 0.560427] NetLabel: Initializing
- [ 0.560428] NetLabel: domain hash size = 128
- [ 0.560429] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.560449] NetLabel: unlabeled traffic allowed by default
- [ 0.560462] PCI: Using ACPI for IRQ routing
- [ 0.563016] PCI: Discovered peer bus 7f
- [ 0.563017] PCI: root bus 7f: using default resources
- [ 0.563018] PCI: Probing PCI hardware (bus 7f)
- [ 0.563036] PCI host bridge to bus 0000:7f
- [ 0.563037] pci_bus 0000:7f: root bus resource [io 0x0000-0xffff]
- [ 0.563039] pci_bus 0000:7f: root bus resource [mem 0x00000000-0x3fffffffffff]
- [ 0.563041] pci_bus 0000:7f: No busn resource found for root bus, will use [bus 7f-ff]
- [ 0.563042] pci_bus 0000:7f: busn_res: can not insert [bus 7f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f])
- [ 0.563052] pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
- [ 0.563101] pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
- [ 0.563159] pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
- [ 0.563224] pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
- [ 0.563268] pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
- [ 0.563323] pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
- [ 0.563384] pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
- [ 0.563422] pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
- [ 0.563455] pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
- [ 0.563489] pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
- [ 0.563524] pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
- [ 0.563558] pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
- [ 0.563593] pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
- [ 0.563624] pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
- [ 0.563656] pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
- [ 0.563693] pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
- [ 0.563726] pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
- [ 0.563758] pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
- [ 0.563790] pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
- [ 0.563822] pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
- [ 0.563822] pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
- [ 0.563822] pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
- [ 0.563822] pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
- [ 0.563822] pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
- [ 0.563822] pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
- [ 0.563822] pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
- [ 0.564276] pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
- [ 0.564276] pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
- [ 0.564276] pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
- [ 0.564276] pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
- [ 0.564276] pci_bus 0000:7f: busn_res: [bus 7f-ff] end is updated to 7f
- [ 0.564276] pci_bus 0000:7f: busn_res: can not insert [bus 7f] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f])
- [ 0.564276] PCI: pci_cache_line_size set to 64 bytes
- [ 0.564276] pci 0000:02:00.0: can't claim BAR 7 [mem 0x380000000000-0x38000007bfff 64bit pref]: no compatible bridge window
- [ 0.564276] e820: reserve RAM buffer [mem 0xdb41e000-0xdbffffff]
- [ 0.564276] e820: reserve RAM buffer [mem 0xdbb2c000-0xdbffffff]
- [ 0.564355] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.564362] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.568311] clocksource: Switched to clocksource tsc-early
- [ 0.577664] VFS: Disk quotas dquot_6.6.0
- [ 0.577684] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.577798] AppArmor: AppArmor Filesystem Enabled
- [ 0.577825] pnp: PnP ACPI init
- [ 0.578003] system 00:00: [mem 0xfc000000-0xfcffffff window] has been reserved
- [ 0.578007] system 00:00: [mem 0xfd000000-0xfdffffff window] has been reserved
- [ 0.578009] system 00:00: [mem 0xfe000000-0xfeafffff window] has been reserved
- [ 0.578011] system 00:00: [mem 0xfeb00000-0xfebfffff window] has been reserved
- [ 0.578013] system 00:00: [mem 0xfed00400-0xfed3ffff window] could not be reserved
- [ 0.578014] system 00:00: [mem 0xfed45000-0xfedfffff window] has been reserved
- [ 0.578016] system 00:00: [mem 0xee746000-0xee746fff window] has been reserved
- [ 0.578023] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.578134] system 00:01: [mem 0xee744000-0xee745fff] could not be reserved
- [ 0.578139] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.578337] system 00:02: [io 0x0620-0x063f] has been reserved
- [ 0.578339] system 00:02: [io 0x0610-0x061f] has been reserved
- [ 0.578343] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.578393] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.578445] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
- [ 0.578469] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.578551] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.578555] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.578954] system 00:07: [io 0x0400-0x0453] has been reserved
- [ 0.578957] system 00:07: [io 0x0458-0x047f] has been reserved
- [ 0.578958] system 00:07: [io 0x1180-0x119f] has been reserved
- [ 0.578960] system 00:07: [io 0x0500-0x057f] has been reserved
- [ 0.578961] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.578963] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
- [ 0.578965] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
- [ 0.578966] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.578971] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.579068] system 00:08: [io 0x0454-0x0457] has been reserved
- [ 0.579073] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.579648] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.579652] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.579655] pnp: PnP ACPI: found 10 devices
- [ 0.585447] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.585501] NET: Registered protocol family 2
- [ 0.585710] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.587898] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 0.588350] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.588998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
- [ 0.589080] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.589331] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
- [ 0.589635] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
- [ 0.589843] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
- [ 0.590002] NET: Registered protocol family 1
- [ 0.590008] NET: Registered protocol family 44
- [ 0.590020] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
- [ 0.590035] pci 0000:00:01.0: PCI bridge to [bus 03]
- [ 0.590037] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.590042] pci 0000:00:01.0: bridge window [mem 0xee600000-0xee6fffff]
- [ 0.590048] pci 0000:00:02.0: PCI bridge to [bus 05]
- [ 0.590056] pci 0000:00:03.0: PCI bridge to [bus 04]
- [ 0.590060] pci 0000:00:03.0: bridge window [mem 0xee500000-0xee5fffff]
- [ 0.590069] pci 0000:02:00.0: BAR 7: assigned [mem 0xefc04000-0xefc7ffff 64bit pref]
- [ 0.590075] pci 0000:00:11.0: PCI bridge to [bus 02]
- [ 0.590077] pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
- [ 0.590084] pci 0000:00:11.0: bridge window [mem 0xef800000-0xefcfffff 64bit pref]
- [ 0.590090] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.590101] pci 0000:00:1c.5: PCI bridge to [bus 06]
- [ 0.590104] pci 0000:00:1c.5: bridge window [mem 0xee100000-0xee2fffff]
- [ 0.590108] pci 0000:00:1c.5: bridge window [mem 0xef000000-0xef7fffff 64bit pref]
- [ 0.590113] pci 0000:00:1c.6: PCI bridge to [bus 07]
- [ 0.590123] pci 0000:00:1c.7: PCI bridge to [bus 08]
- [ 0.590127] pci 0000:00:1c.7: bridge window [mem 0xee400000-0xee4fffff]
- [ 0.590135] pci 0000:00:1e.0: PCI bridge to [bus 09]
- [ 0.590137] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
- [ 0.590140] pci 0000:00:1e.0: bridge window [mem 0xee300000-0xee3fffff]
- [ 0.590143] pci 0000:00:1e.0: bridge window [mem 0xee800000-0xeeffffff 64bit pref]
- [ 0.590148] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
- [ 0.590150] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.590151] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
- [ 0.590153] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
- [ 0.590154] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
- [ 0.590156] pci_bus 0000:00: resource 9 [mem 0xec000000-0xefffffff window]
- [ 0.590157] pci_bus 0000:00: resource 10 [mem 0x380000000000-0x38007fffffff window]
- [ 0.590159] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- [ 0.590160] pci_bus 0000:03: resource 1 [mem 0xee600000-0xee6fffff]
- [ 0.590162] pci_bus 0000:04: resource 1 [mem 0xee500000-0xee5fffff]
- [ 0.590164] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.590165] pci_bus 0000:02: resource 2 [mem 0xef800000-0xefcfffff 64bit pref]
- [ 0.590167] pci_bus 0000:06: resource 1 [mem 0xee100000-0xee2fffff]
- [ 0.590168] pci_bus 0000:06: resource 2 [mem 0xef000000-0xef7fffff 64bit pref]
- [ 0.590170] pci_bus 0000:08: resource 1 [mem 0xee400000-0xee4fffff]
- [ 0.590171] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
- [ 0.590172] pci_bus 0000:09: resource 1 [mem 0xee300000-0xee3fffff]
- [ 0.590174] pci_bus 0000:09: resource 2 [mem 0xee800000-0xeeffffff 64bit pref]
- [ 0.590175] pci_bus 0000:09: resource 4 [io 0x0000-0x03af window]
- [ 0.590176] pci_bus 0000:09: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.590178] pci_bus 0000:09: resource 6 [io 0x03b0-0x03df window]
- [ 0.590179] pci_bus 0000:09: resource 7 [io 0x0d00-0xffff window]
- [ 0.590180] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000dffff window]
- [ 0.590182] pci_bus 0000:09: resource 9 [mem 0xec000000-0xefffffff window]
- [ 0.590183] pci_bus 0000:09: resource 10 [mem 0x380000000000-0x38007fffffff window]
- [ 0.590270] pci_bus 0000:7f: resource 4 [io 0x0000-0xffff]
- [ 0.590272] pci_bus 0000:7f: resource 5 [mem 0x00000000-0x3fffffffffff]
- [ 0.590302] pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
- [ 0.612403] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6f0 took 21565 usecs
- [ 0.636397] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6f0 took 23410 usecs
- [ 0.636588] pci 0000:09:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.636653] PCI: CLS 64 bytes, default 64
- [ 0.636701] Trying to unpack rootfs image as initramfs...
- [ 1.360493] Freeing initrd memory: 57000K
- [ 1.360611] DMAR: [Firmware Bug]: RMRR entry for device 08:00.0 is broken - applying workaround
- [ 1.360636] DMAR: dmar0: Using Queued invalidation
- [ 1.360711] pci 0000:00:00.0: Adding to iommu group 0
- [ 1.360737] pci 0000:00:01.0: Adding to iommu group 1
- [ 1.360756] pci 0000:00:02.0: Adding to iommu group 2
- [ 1.360775] pci 0000:00:03.0: Adding to iommu group 3
- [ 1.360792] pci 0000:00:04.0: Adding to iommu group 4
- [ 1.360810] pci 0000:00:04.1: Adding to iommu group 5
- [ 1.360826] pci 0000:00:04.2: Adding to iommu group 6
- [ 1.360842] pci 0000:00:04.3: Adding to iommu group 7
- [ 1.360858] pci 0000:00:04.4: Adding to iommu group 8
- [ 1.360876] pci 0000:00:04.5: Adding to iommu group 9
- [ 1.360891] pci 0000:00:04.6: Adding to iommu group 10
- [ 1.360907] pci 0000:00:04.7: Adding to iommu group 11
- [ 1.360923] pci 0000:00:05.0: Adding to iommu group 12
- [ 1.360940] pci 0000:00:05.2: Adding to iommu group 13
- [ 1.360967] pci 0000:00:05.4: Adding to iommu group 14
- [ 1.360983] pci 0000:00:11.0: Adding to iommu group 15
- [ 1.361027] pci 0000:00:16.0: Adding to iommu group 16
- [ 1.361047] pci 0000:00:16.2: Adding to iommu group 16
- [ 1.361063] pci 0000:00:16.3: Adding to iommu group 16
- [ 1.361079] pci 0000:00:19.0: Adding to iommu group 17
- [ 1.361095] pci 0000:00:1a.0: Adding to iommu group 18
- [ 1.361111] pci 0000:00:1b.0: Adding to iommu group 19
- [ 1.361128] pci 0000:00:1c.0: Adding to iommu group 20
- [ 1.361144] pci 0000:00:1c.5: Adding to iommu group 21
- [ 1.361159] pci 0000:00:1c.6: Adding to iommu group 22
- [ 1.361175] pci 0000:00:1c.7: Adding to iommu group 23
- [ 1.361191] pci 0000:00:1d.0: Adding to iommu group 24
- [ 1.361207] pci 0000:00:1e.0: Adding to iommu group 25
- [ 1.361252] pci 0000:00:1f.0: Adding to iommu group 26
- [ 1.361273] pci 0000:00:1f.2: Adding to iommu group 26
- [ 1.361292] pci 0000:00:1f.3: Adding to iommu group 26
- [ 1.361313] pci 0000:03:00.0: Adding to iommu group 27
- [ 1.361331] pci 0000:04:00.0: Adding to iommu group 28
- [ 1.361352] pci 0000:02:00.0: Adding to iommu group 29
- [ 1.361368] pci 0000:06:00.0: Adding to iommu group 30
- [ 1.361385] pci 0000:08:00.0: Adding to iommu group 31
- [ 1.361389] pci 0000:09:04.0: Adding to iommu group 25
- [ 1.361393] pci 0000:09:05.0: Adding to iommu group 25
- [ 1.361421] pci 0000:7f:08.0: Adding to iommu group 32
- [ 1.361437] pci 0000:7f:08.3: Adding to iommu group 33
- [ 1.361453] pci 0000:7f:08.4: Adding to iommu group 34
- [ 1.361481] pci 0000:7f:09.0: Adding to iommu group 35
- [ 1.361497] pci 0000:7f:09.3: Adding to iommu group 36
- [ 1.361513] pci 0000:7f:09.4: Adding to iommu group 37
- [ 1.361568] pci 0000:7f:0a.0: Adding to iommu group 38
- [ 1.361592] pci 0000:7f:0a.1: Adding to iommu group 38
- [ 1.361612] pci 0000:7f:0a.2: Adding to iommu group 38
- [ 1.361633] pci 0000:7f:0a.3: Adding to iommu group 38
- [ 1.361668] pci 0000:7f:0b.0: Adding to iommu group 39
- [ 1.361689] pci 0000:7f:0b.3: Adding to iommu group 39
- [ 1.361754] pci 0000:7f:0c.0: Adding to iommu group 40
- [ 1.361778] pci 0000:7f:0c.1: Adding to iommu group 40
- [ 1.361799] pci 0000:7f:0c.2: Adding to iommu group 40
- [ 1.361819] pci 0000:7f:0c.6: Adding to iommu group 40
- [ 1.361839] pci 0000:7f:0c.7: Adding to iommu group 40
- [ 1.361894] pci 0000:7f:0d.0: Adding to iommu group 41
- [ 1.361916] pci 0000:7f:0d.1: Adding to iommu group 41
- [ 1.361936] pci 0000:7f:0d.2: Adding to iommu group 41
- [ 1.361958] pci 0000:7f:0d.6: Adding to iommu group 41
- [ 1.361993] pci 0000:7f:0e.0: Adding to iommu group 42
- [ 1.362015] pci 0000:7f:0e.1: Adding to iommu group 42
- [ 1.362032] pci 0000:7f:0f.0: Adding to iommu group 43
- [ 1.362050] pci 0000:7f:0f.1: Adding to iommu group 44
- [ 1.362066] pci 0000:7f:0f.2: Adding to iommu group 45
- [ 1.362082] pci 0000:7f:0f.3: Adding to iommu group 46
- [ 1.362100] pci 0000:7f:0f.4: Adding to iommu group 47
- [ 1.362117] pci 0000:7f:0f.5: Adding to iommu group 48
- [ 1.362145] pci 0000:7f:0f.6: Adding to iommu group 49
- [ 1.362162] pci 0000:7f:10.0: Adding to iommu group 50
- [ 1.362179] pci 0000:7f:10.1: Adding to iommu group 51
- [ 1.362196] pci 0000:7f:10.2: Adding to iommu group 52
- [ 1.362216] pci 0000:7f:10.3: Adding to iommu group 53
- [ 1.362234] pci 0000:7f:10.4: Adding to iommu group 54
- [ 1.362252] pci 0000:7f:10.5: Adding to iommu group 55
- [ 1.362271] pci 0000:7f:10.6: Adding to iommu group 56
- [ 1.362288] pci 0000:7f:10.7: Adding to iommu group 57
- [ 1.362314] pci 0000:7f:11.0: Adding to iommu group 58
- [ 1.362380] pci 0000:7f:13.0: Adding to iommu group 59
- [ 1.362405] pci 0000:7f:13.1: Adding to iommu group 59
- [ 1.362428] pci 0000:7f:13.4: Adding to iommu group 59
- [ 1.362453] pci 0000:7f:13.5: Adding to iommu group 59
- [ 1.362480] pci 0000:7f:13.6: Adding to iommu group 59
- [ 1.362536] DMAR: Intel(R) Virtualization Technology for Directed I/O
- [ 1.362537] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 1.362538] software IO TLB: mapped [mem 0x00000000d4963000-0x00000000d8963000] (64MB)
- [ 1.362977] check: Scanning for low memory corruption every 60 seconds
- [ 1.363554] Initialise system trusted keyrings
- [ 1.363563] Key type blacklist registered
- [ 1.363589] workingset: timestamp_bits=36 max_order=24 bucket_order=0
- [ 1.364620] zbud: loaded
- [ 1.364873] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.364991] fuse: init (API version 7.33)
- [ 1.365132] integrity: Platform Keyring initialized
- [ 1.374183] Key type asymmetric registered
- [ 1.374184] Asymmetric key parser 'x509' registered
- [ 1.374192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
- [ 1.374224] io scheduler mq-deadline registered
- [ 1.375834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 1.375897] efifb: probing for efifb
- [ 1.375910] efifb: No BGRT, not showing boot graphics
- [ 1.375911] efifb: framebuffer at 0xee800000, using 960k, total 960k
- [ 1.375913] efifb: mode is 640x480x24, linelength=1920, pages=1
- [ 1.375914] efifb: scrolling: redraw
- [ 1.375914] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 1.375955] fbcon: Deferring console take-over
- [ 1.375956] fb0: EFI VGA frame buffer device
- [ 1.375964] intel_idle: MWAIT substates: 0x21120
- [ 1.376041] Monitor-Mwait will be used to enter C-1 state
- [ 1.376049] Monitor-Mwait will be used to enter C-2 state
- [ 1.376054] Monitor-Mwait will be used to enter C-2 state
- [ 1.376058] ACPI: \_SB_.SCK0.C000: Found 3 idle states
- [ 1.376061] intel_idle: v0.5.1 model 0x2D
- [ 1.376544] intel_idle: Local APIC timer is reliable in all C-states
- [ 1.376685] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 1.376721] ACPI: Power Button [PWRB]
- [ 1.376760] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 1.376781] ACPI: Power Button [PWRF]
- [ 1.392894] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.394251] serial 0000:00:16.3: enabling device (0000 -> 0003)
- [ 1.414668] 0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 17, base_baud = 115200) is a 16550A
- [ 1.414957] Linux agpgart interface v0.103
- [ 1.560360] loop: module loaded
- [ 1.561386] scsi host0: ata_generic
- [ 1.561731] scsi host1: ata_generic
- [ 1.561770] ata1: PATA max UDMA/100 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 18
- [ 1.561772] ata2: PATA max UDMA/100 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 18
- [ 1.561881] libphy: Fixed MDIO Bus: probed
- [ 1.561882] tun: Universal TUN/TAP device driver, 1.6
- [ 1.561991] PPP generic driver version 2.4.2
- [ 1.562206] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 1.565172] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.565179] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.565477] mousedev: PS/2 mouse device common for all mice
- [ 1.565825] rtc_cmos 00:05: RTC can wake from S4
- [ 1.566162] rtc_cmos 00:05: registered as rtc0
- [ 1.566230] rtc_cmos 00:05: setting system clock to 2021-09-03T19:54:59 UTC (1630698899)
- [ 1.566246] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.566254] i2c /dev entries driver
- [ 1.566293] device-mapper: uevent: version 1.0.3
- [ 1.566394] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]
- [ 1.566419] platform eisa.0: Probing EISA bus 0
- [ 1.566421] platform eisa.0: EISA: Cannot allocate resource for mainboard
- [ 1.566423] platform eisa.0: Cannot allocate resource for EISA slot 1
- [ 1.566424] platform eisa.0: Cannot allocate resource for EISA slot 2
- [ 1.566425] platform eisa.0: Cannot allocate resource for EISA slot 3
- [ 1.566426] platform eisa.0: Cannot allocate resource for EISA slot 4
- [ 1.566427] platform eisa.0: Cannot allocate resource for EISA slot 5
- [ 1.566429] platform eisa.0: Cannot allocate resource for EISA slot 6
- [ 1.566430] platform eisa.0: Cannot allocate resource for EISA slot 7
- [ 1.566431] platform eisa.0: Cannot allocate resource for EISA slot 8
- [ 1.566432] platform eisa.0: EISA: Detected 0 cards
- [ 1.566436] intel_pstate: Intel P-state driver initializing
- [ 1.567445] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.567449] EFI Variables Facility v0.08 2004-May-17
- [ 1.580480] drop_monitor: Initializing network drop monitor service
- [ 1.580622] NET: Registered protocol family 10
- [ 1.586443] Segment Routing with IPv6
- [ 1.586462] NET: Registered protocol family 17
- [ 1.586480] Bridge firewalling registered
- [ 1.586513] Key type dns_resolver registered
- [ 1.587423] microcode: sig=0x206d7, pf=0x1, revision=0x714
- [ 1.587480] microcode: Microcode Update Driver: v2.2.
- [ 1.587486] IPI shorthand broadcast: enabled
- [ 1.587496] sched_clock: Marking stable (1586742227, 734543)->(1597640750, -10163980)
- [ 1.587569] registered taskstats version 1
- [ 1.587580] Loading compiled-in X.509 certificates
- [ 1.587986] zswap: loaded using pool lzo/zbud
- [ 1.588130] Key type ._fscrypt registered
- [ 1.588131] Key type .fscrypt registered
- [ 1.588132] Key type fscrypt-provisioning registered
- [ 1.590696] Key type encrypted registered
- [ 1.590700] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.590973] integrity: Loading X.509 certificate: UEFI:db
- [ 1.591008] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
- [ 1.591009] integrity: Loading X.509 certificate: UEFI:db
- [ 1.591027] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
- [ 1.591028] integrity: Loading X.509 certificate: UEFI:db
- [ 1.591045] integrity: Loaded X.509 cert 'Hewlett-Packard UEFI Secure Boot DB Key: e7203ac28b848d3c03432f6a485dd1f4c7b8e529'
- [ 1.591573] ima: No TPM chip found, activating TPM-bypass!
- [ 1.591577] ima: Allocated hash algorithm: sha1
- [ 1.591586] ima: No architecture policies found
- [ 1.591594] evm: Initialising EVM extended attributes:
- [ 1.591594] evm: security.selinux
- [ 1.591595] evm: security.SMACK64
- [ 1.591596] evm: security.SMACK64EXEC
- [ 1.591596] evm: security.SMACK64TRANSMUTE
- [ 1.591597] evm: security.SMACK64MMAP
- [ 1.591598] evm: security.apparmor
- [ 1.591598] evm: security.ima
- [ 1.591599] evm: security.capability
- [ 1.591600] evm: HMAC attrs: 0x1
- [ 1.592061] PM: Magic number: 5:151:950
- [ 1.592092] tty tty7: hash matches
- [ 1.592148] processor cpu5: hash matches
- [ 1.592154] memory memory3: hash matches
- [ 1.592238] RAS: Correctable Errors collector initialized.
- [ 1.900749] Freeing unused decrypted memory: 2036K
- [ 1.901102] Freeing unused kernel image (initmem) memory: 2660K
- [ 1.901104] Write protecting the kernel read-only data: 28672k
- [ 1.901612] Freeing unused kernel image (text/rodata gap) memory: 2036K
- [ 1.901761] Freeing unused kernel image (rodata/data gap) memory: 380K
- [ 1.916057] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.916064] Run /init as init process
- [ 1.916065] with arguments:
- [ 1.916066] /init
- [ 1.916067] with environment:
- [ 1.916068] HOME=/
- [ 1.916069] TERM=linux
- [ 1.916070] BOOT_IMAGE=/boot/vmlinuz-5.11.22-4-pve
- [ 1.916071] intel_iommu=on
- [ 2.043378] ahci 0000:00:1f.2: version 3.0
- [ 2.043379] i801_smbus 0000:00:1f.3: enabling device (0101 -> 0103)
- [ 2.043403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.043756] ehci-pci: EHCI PCI platform driver
- [ 2.043945] e1000e: Intel(R) PRO/1000 Network Driver
- [ 2.043947] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 2.044409] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 2.044419] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 2.044437] ehci-pci 0000:00:1a.0: debug port 2
- [ 2.044502] mlx4_core: Mellanox ConnectX core driver v4.0-0
- [ 2.044539] mlx4_core: Initializing 0000:06:00.0
- [ 2.044672] firewire_ohci 0000:09:05.0: enabling device (0100 -> 0102)
- [ 2.044674] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 2.045120] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
- [ 2.045136] isci 0000:02:00.0: driver configured for rev: 5 silicon
- [ 2.045232] isci 0000:02:00.0: Unable to obtain EFI var data for OEM parms
- [ 2.045241] isci 0000:02:00.0: OEM parameter table found in OROM
- [ 2.045244] isci 0000:02:00.0: OEM SAS parameters (version: 1.1) loaded (platform)
- [ 2.045537] nvme nvme0: pci function 0000:04:00.0
- [ 2.046025] isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
- [ 2.046453] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 2.047474] i2c i2c-0: 8/8 memory slots populated (from DMI)
- [ 2.047477] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
- [ 2.048328] scsi host2: isci
- [ 2.048418] ehci-pci 0000:00:1a.0: irq 16, io mem 0xee74f000
- [ 2.049134] nvme nvme0: Shutdown timeout set to 8 seconds
- [ 2.055743] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
- [ 2.055749] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
- [ 2.059159] nvme nvme0: 12/0/0 default/read/poll queues
- [ 2.068343] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 2.068386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
- [ 2.068388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.068389] usb usb1: Product: EHCI Host Controller
- [ 2.068401] usb usb1: Manufacturer: Linux 5.11.22-4-pve ehci_hcd
- [ 2.068402] usb usb1: SerialNumber: 0000:00:1a.0
- [ 2.068612] hub 1-0:1.0: USB hub found
- [ 2.068618] hub 1-0:1.0: 2 ports detected
- [ 2.068757] xhci_hcd 0000:08:00.0: xHCI Host Controller
- [ 2.068765] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 2
- [ 2.068909] xhci_hcd 0000:08:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004004000
- [ 2.069153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
- [ 2.069155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.069157] usb usb2: Product: xHCI Host Controller
- [ 2.069158] usb usb2: Manufacturer: Linux 5.11.22-4-pve xhci-hcd
- [ 2.069159] usb usb2: SerialNumber: 0000:08:00.0
- [ 2.069344] hub 2-0:1.0: USB hub found
- [ 2.069356] hub 2-0:1.0: 4 ports detected
- [ 2.069499] xhci_hcd 0000:08:00.0: xHCI Host Controller
- [ 2.069502] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
- [ 2.069504] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 2.069508] xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed
- [ 2.069511] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
- [ 2.069523] ehci-pci 0000:00:1d.0: debug port 2
- [ 2.069524] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.069539] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
- [ 2.069541] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.069542] usb usb3: Product: xHCI Host Controller
- [ 2.069543] usb usb3: Manufacturer: Linux 5.11.22-4-pve xhci-hcd
- [ 2.069544] usb usb3: SerialNumber: 0000:08:00.0
- [ 2.069710] hub 3-0:1.0: USB hub found
- [ 2.069727] hub 3-0:1.0: 4 ports detected
- [ 2.073436] ehci-pci 0000:00:1d.0: irq 23, io mem 0xee74e000
- [ 2.092321] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 2.092375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
- [ 2.092377] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.092378] usb usb4: Product: EHCI Host Controller
- [ 2.092380] usb usb4: Manufacturer: Linux 5.11.22-4-pve ehci_hcd
- [ 2.092381] usb usb4: SerialNumber: 0000:00:1d.0
- [ 2.092542] hub 4-0:1.0: USB hub found
- [ 2.092548] hub 4-0:1.0: 2 ports detected
- [ 2.092882] scsi host3: ahci
- [ 2.093027] scsi host4: ahci
- [ 2.093187] scsi host5: ahci
- [ 2.093338] scsi host6: ahci
- [ 2.093469] scsi host7: ahci
- [ 2.093631] scsi host8: ahci
- [ 2.093676] ata3: SATA max UDMA/133 abar m2048@0xee74c000 port 0xee74c100 irq 36
- [ 2.093679] ata4: SATA max UDMA/133 abar m2048@0xee74c000 port 0xee74c180 irq 36
- [ 2.093680] ata5: DUMMY
- [ 2.093681] ata6: SATA max UDMA/133 abar m2048@0xee74c000 port 0xee74c280 irq 36
- [ 2.093683] ata7: SATA max UDMA/133 abar m2048@0xee74c000 port 0xee74c300 irq 36
- [ 2.093684] ata8: DUMMY
- [ 2.093775] ahci 0000:03:00.0: controller can do FBS, turning on CAP_FBS
- [ 2.103950] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
- [ 2.103953] ahci 0000:03:00.0: flags: 64bit ncq fbs pio
- [ 2.104373] firewire_ohci 0000:09:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
- [ 2.104548] scsi host9: ahci
- [ 2.104638] scsi host10: ahci
- [ 2.104720] scsi host11: ahci
- [ 2.104800] scsi host12: ahci
- [ 2.104890] scsi host13: ahci
- [ 2.104980] scsi host14: ahci
- [ 2.105080] scsi host15: ahci
- [ 2.105155] scsi host16: ahci
- [ 2.105197] ata9: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610100 irq 61
- [ 2.105199] ata10: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610180 irq 61
- [ 2.105201] ata11: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610200 irq 61
- [ 2.105202] ata12: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610280 irq 61
- [ 2.105204] ata13: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610300 irq 61
- [ 2.105205] ata14: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610380 irq 61
- [ 2.105207] ata15: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610400 irq 61
- [ 2.105208] ata16: SATA max UDMA/133 abar m2048@0xee610000 port 0xee610480 irq 61
- [ 2.131695] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
- [ 2.218864] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:51:fb:5d:8c:fb
- [ 2.218867] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 2.218910] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
- [ 2.225369] e1000e 0000:00:19.0 eno1: renamed from eth0
- [ 2.388306] tsc: Refined TSC clocksource calibration: 3192.307 MHz
- [ 2.388334] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e03e69b676, max_idle_ns: 440795312496 ns
- [ 2.388422] clocksource: Switched to clocksource tsc
- [ 2.404318] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 2.406888] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.406907] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.407039] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.407197] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.407252] ata4.00: ATA-11: KINGSTON SA400S37120G, SBFKB1D1, max UDMA/133
- [ 2.407256] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.407275] ata7.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102M3, max UDMA/133
- [ 2.407277] ata7.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32)
- [ 2.407542] ata6.00: supports DRM functions and may not be fully accessible
- [ 2.407583] ata7.00: configured for UDMA/133
- [ 2.407731] ata4.00: configured for UDMA/133
- [ 2.413731] ata6.00: ATA-9: WDC WD120EDAZ-11F3RA0, 81.00A81, max UDMA/133
- [ 2.413742] ata6.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.418862] ata15: SATA link down (SStatus 0 SControl 310)
- [ 2.418891] ata10: SATA link down (SStatus 0 SControl 310)
- [ 2.418909] ata12: SATA link down (SStatus 0 SControl 310)
- [ 2.418937] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.418979] ata14: SATA link down (SStatus 0 SControl 310)
- [ 2.418991] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.419007] ata9: SATA link down (SStatus 0 SControl 310)
- [ 2.419017] ata13: SATA link down (SStatus 0 SControl 310)
- [ 2.419028] ata16.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66
- [ 2.419238] ata6.00: supports DRM functions and may not be fully accessible
- [ 2.419312] ata16.00: configured for UDMA/66
- [ 2.421822] ata3.00: ATA-9: INTEL SSDSC2BW240A4, DC32, max UDMA/133
- [ 2.421831] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 2.427449] ata6.00: configured for UDMA/133
- [ 2.428290] usb 4-1: new high-speed USB device number 2 using ehci-pci
- [ 2.446756] ata11.00: ATA-8: KINGSTON SV300S37A120G, 605ABBF2, max UDMA/133
- [ 2.446759] ata11.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
- [ 2.448273] ata3.00: configured for UDMA/133
- [ 2.453193] ata11.00: configured for UDMA/133
- [ 2.561140] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
- [ 2.561143] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.561307] hub 1-1:1.0: USB hub found
- [ 2.561392] hub 1-1:1.0: 6 ports detected
- [ 2.585141] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
- [ 2.585145] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.585307] hub 4-1:1.0: USB hub found
- [ 2.585395] hub 4-1:1.0: 8 ports detected
- [ 2.612393] firewire_core 0000:09:05.0: created device fw0: GUID 0060b000009521fc, S400
- [ 2.872310] usb 4-1.1: new low-speed USB device number 3 using ehci-pci
- [ 2.986143] usb 4-1.1: New USB device found, idVendor=09eb, idProduct=0131, bcdDevice= 1.01
- [ 2.986146] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.986148] usb 4-1.1: Product: USB
- [ 2.986149] usb 4-1.1: Manufacturer: Rextron
- [ 2.990555] hid: raw HID events driver (C) Jiri Kosina
- [ 2.996221] usbcore: registered new interface driver usbhid
- [ 2.996223] usbhid: USB HID core driver
- [ 2.996441] usbcore: registered new interface driver usbmouse
- [ 2.996517] usbcore: registered new interface driver usbkbd
- [ 2.997375] input: Rextron USB as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:09EB:0131.0001/input/input5
- [ 3.056535] hid-generic 0003:09EB:0131.0001: input,hidraw0: USB HID v1.10 Keyboard [Rextron USB] on usb-0000:00:1d.0-1.1/input0
- [ 3.056694] input: Rextron USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:09EB:0131.0002/input/input6
- [ 3.057060] input: Rextron USB Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:09EB:0131.0002/input/input7
- [ 3.116417] input: Rextron USB System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:09EB:0131.0002/input/input8
- [ 3.116614] hid-generic 0003:09EB:0131.0002: input,hidraw1: USB HID v1.00 Mouse [Rextron USB] on usb-0000:00:1d.0-1.1/input1
- [ 3.156442] sas: phy-2:0 added to port-2:0, phy_mask:0x1 (50014380264a4aa6)
- [ 3.156870] sas: DOING DISCOVERY on port 0, pid:7
- [ 3.156930] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
- [ 3.157162] sas: ata17: end_device-2:0: dev error handler
- [ 3.324860] ata17.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
- [ 3.324863] ata17.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32)
- [ 3.325543] ata17.00: configured for UDMA/133
- [ 3.325591] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
- [ 3.325915] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
- [ 3.325947] sas: DONE DISCOVERY on port 0, pid:7, result:0
- [ 3.326025] sas: phy-2:1 added to port-2:1, phy_mask:0x2 (50014380264a4aa7)
- [ 3.326135] sas: DOING DISCOVERY on port 1, pid:7
- [ 3.326176] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
- [ 3.326184] sas: ata17: end_device-2:0: dev error handler
- [ 3.326227] sas: ata18: end_device-2:1: dev error handler
- [ 3.497057] ata18.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7B0, max UDMA/133
- [ 3.497060] ata18.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
- [ 3.497953] ata18.00: configured for UDMA/133
- [ 3.497995] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
- [ 3.498220] scsi 2:0:1:0: Direct-Access ATA Hitachi HTS54505 A7B0 PQ: 0 ANSI: 5
- [ 3.498263] sas: DONE DISCOVERY on port 1, pid:7, result:0
- [ 3.498362] sas: phy-2:2 added to port-2:2, phy_mask:0x4 (50014380264a4aa8)
- [ 3.498431] sas: DOING DISCOVERY on port 2, pid:7
- [ 3.498477] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
- [ 3.498517] sas: ata17: end_device-2:0: dev error handler
- [ 3.498545] sas: ata18: end_device-2:1: dev error handler
- [ 3.498551] sas: ata19: end_device-2:2: dev error handler
- [ 3.706531] ata19.00: ATA-8: ST640LM001 HN-M640MBB, 2AR10002, max UDMA/133
- [ 3.706534] ata19.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 32)
- [ 3.712894] ata19.00: configured for UDMA/133
- [ 3.712939] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
- [ 3.723162] scsi 2:0:2:0: Direct-Access ATA ST640LM001 HN-M6 0002 PQ: 0 ANSI: 5
- [ 3.723204] sas: DONE DISCOVERY on port 2, pid:7, result:0
- [ 3.723302] sas: phy-2:3 added to port-2:3, phy_mask:0x8 (50014380264a4aa9)
- [ 3.723363] sas: DOING DISCOVERY on port 3, pid:7
- [ 3.723405] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
- [ 3.723445] sas: ata17: end_device-2:0: dev error handler
- [ 3.723474] sas: ata18: end_device-2:1: dev error handler
- [ 3.723500] sas: ata19: end_device-2:2: dev error handler
- [ 3.723502] sas: ata20: end_device-2:3: dev error handler
- [ 3.940838] ata20.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
- [ 3.940842] ata20.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32)
- [ 3.942990] ata20.00: configured for UDMA/133
- [ 3.943043] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
- [ 3.953289] scsi 2:0:3:0: Direct-Access ATA WDC WD3200BEVT-2 1A11 PQ: 0 ANSI: 5
- [ 3.953330] sas: DONE DISCOVERY on port 3, pid:7, result:0
- [ 3.953634] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
- [ 3.953638] sd 2:0:0:0: [sda] 4096-byte physical blocks
- [ 3.953651] sd 2:0:0:0: [sda] Write Protect is off
- [ 3.953654] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.953672] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.953680] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 3.953882] sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 3.953884] sd 2:0:1:0: [sdb] 4096-byte physical blocks
- [ 3.953891] sd 2:0:1:0: [sdb] Write Protect is off
- [ 3.953892] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- [ 3.953903] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.953925] sd 2:0:1:0: Attached scsi generic sg1 type 0
- [ 3.954183] sd 2:0:2:0: Attached scsi generic sg2 type 0
- [ 3.954206] sd 2:0:2:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
- [ 3.954209] sd 2:0:2:0: [sdc] 4096-byte physical blocks
- [ 3.954215] sd 2:0:2:0: [sdc] Write Protect is off
- [ 3.954216] sd 2:0:2:0: [sdc] Mode Sense: 00 3a 00 00
- [ 3.954225] sd 2:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.954368] sd 2:0:3:0: Attached scsi generic sg3 type 0
- [ 3.954440] sd 2:0:3:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 3.954448] sd 2:0:3:0: [sdd] Write Protect is off
- [ 3.954449] sd 2:0:3:0: [sdd] Mode Sense: 00 3a 00 00
- [ 3.954460] sd 2:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.954500] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 DC32 PQ: 0 ANSI: 5
- [ 3.954653] sd 3:0:0:0: Attached scsi generic sg4 type 0
- [ 3.954678] sd 3:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/224 GiB)
- [ 3.954685] sd 3:0:0:0: [sde] Write Protect is off
- [ 3.954687] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
- [ 3.954697] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.954811] scsi 4:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1D1 PQ: 0 ANSI: 5
- [ 3.954915] sd 4:0:0:0: Attached scsi generic sg5 type 0
- [ 3.954995] sd 4:0:0:0: [sdf] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 3.955005] sd 4:0:0:0: [sdf] Write Protect is off
- [ 3.955007] sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
- [ 3.955024] sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.955046] scsi 6:0:0:0: Direct-Access ATA WDC WD120EDAZ-11 0A81 PQ: 0 ANSI: 5
- [ 3.955238] sd 6:0:0:0: [sdg] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
- [ 3.955240] sd 6:0:0:0: [sdg] 4096-byte physical blocks
- [ 3.955247] sd 6:0:0:0: [sdg] Write Protect is off
- [ 3.955248] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
- [ 3.955254] sd 6:0:0:0: Attached scsi generic sg6 type 0
- [ 3.955271] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.955379] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSA2M160 02M3 PQ: 0 ANSI: 5
- [ 3.955510] sd 7:0:0:0: Attached scsi generic sg7 type 0
- [ 3.955536] ata7.00: Enabling discard_zeroes_data
- [ 3.955582] sd 7:0:0:0: [sdh] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 3.955595] sd 7:0:0:0: [sdh] Write Protect is off
- [ 3.955598] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
- [ 3.955623] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.955686] scsi 11:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF2 PQ: 0 ANSI: 5
- [ 3.955789] sd 11:0:0:0: Attached scsi generic sg8 type 0
- [ 3.955862] sd 11:0:0:0: [sdi] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 3.955866] sd 11:0:0:0: [sdi] 4096-byte physical blocks
- [ 3.955877] sd 11:0:0:0: [sdi] Write Protect is off
- [ 3.955880] sd 11:0:0:0: [sdi] Mode Sense: 00 3a 00 00
- [ 3.955894] sd 11:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.955975] scsi 16:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
- [ 3.956087] scsi 16:0:0:0: Attached scsi generic sg9 type 3
- [ 4.000460] ata7.00: Enabling discard_zeroes_data
- [ 4.002555] sdh: sdh1 sdh2 sdh3
- [ 4.054708] sdd: sdd1 sdd2 sdd3 sdd4
- [ 4.224380] sd 2:0:2:0: [sdc] Attached SCSI disk
- [ 4.232326] ata7.00: Enabling discard_zeroes_data
- [ 4.232400] sd 7:0:0:0: [sdh] Attached SCSI disk
- [ 4.232401] sd 4:0:0:0: [sdf] Attached SCSI disk
- [ 4.240839] random: lvm: uninitialized urandom read (4 bytes read)
- [ 4.250178] random: lvm: uninitialized urandom read (2 bytes read)
- [ 4.250591] random: lvm: uninitialized urandom read (4 bytes read)
- [ 4.328406] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 4.332380] sd 2:0:3:0: [sdd] Attached SCSI disk
- [ 4.332385] sd 2:0:1:0: [sdb] Attached SCSI disk
- [ 4.332450] sd 3:0:0:0: [sde] Attached SCSI disk
- [ 4.336391] sd 11:0:0:0: [sdi] Attached SCSI disk
- [ 4.338307] sd 6:0:0:0: [sdg] Attached SCSI disk
- [ 4.774665] mlx4_core 0000:06:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.5 (capable of 32.000 Gb/s with 5.0 GT/s PCIe x8 link)
- [ 4.809055] random: fast init done
- [ 4.853190] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
- [ 4.853366] mlx4_en 0000:06:00.0: Activating port:1
- [ 4.853472] mlx4_en: 0000:06:00.0: Port 1: enabling only PFC DCB ops
- [ 4.855520] mlx4_en: 0000:06:00.0: Port 1: Using 12 TX rings
- [ 4.855524] mlx4_en: 0000:06:00.0: Port 1: Using 8 RX rings
- [ 4.855800] mlx4_en: 0000:06:00.0: Port 1: Initializing port
- [ 4.857188] mlx4_core 0000:06:00.0 ens3: renamed from eth0
- [ 4.857916] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
- [ 4.858257] <mlx4_ib> mlx4_ib_add: counter index 1 for port 1 allocated 1
- [ 5.128917] fbcon: Taking over console
- [ 5.128982] Console: switching to colour frame buffer device 80x30
- [ 5.142801] random: crng init done
- [ 5.142803] random: 7 urandom warning(s) missed due to ratelimiting
- [ 5.388283] raid6: sse2x4 gen() 16527 MB/s
- [ 5.456283] raid6: sse2x4 xor() 9326 MB/s
- [ 5.524279] raid6: sse2x2 gen() 16673 MB/s
- [ 5.592283] raid6: sse2x2 xor() 10010 MB/s
- [ 5.660279] raid6: sse2x1 gen() 15080 MB/s
- [ 5.728279] raid6: sse2x1 xor() 9135 MB/s
- [ 5.728280] raid6: using algorithm sse2x2 gen() 16673 MB/s
- [ 5.728281] raid6: .... xor() 10010 MB/s, rmw enabled
- [ 5.728288] raid6: using ssse3x2 recovery algorithm
- [ 5.728785] xor: automatically using best checksumming function avx
- [ 5.741725] Btrfs loaded, crc32c=crc32c-intel, zoned=yes
- [ 7.091039] mlx4_en: ens3: Link Up
- [ 7.869652] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
- [ 8.007504] systemd[1]: Inserted module 'autofs4'
- [ 8.045862] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
- [ 8.064399] systemd[1]: Detected architecture x86-64.
- [ 8.064873] systemd[1]: Set hostname to <pve21>.
- [ 8.222170] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.222593] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.222901] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.223212] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.223516] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.223832] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.224133] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.224471] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.224763] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.225057] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.225356] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.225649] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.225938] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.226229] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.226516] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.226805] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.227089] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.227382] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.227674] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.227963] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.228268] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.228587] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.228885] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.229177] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.229472] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.229770] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.230060] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.230347] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.230648] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.230943] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.231234] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.231527] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.231813] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.232113] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.232453] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.232745] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.233037] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.233325] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.233613] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.233900] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.234190] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.234479] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.234766] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.235054] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.235340] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.235630] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.235925] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.236216] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.236551] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.236857] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.237160] systemd[1]: /lib/systemd/system/[email protected]:8: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 8.261061] systemd[1]: Queued start job for default target Graphical Interface.
- [ 8.277595] systemd[1]: Created slice system-ceph\x2dmds.slice.
- [ 8.277866] systemd[1]: Created slice system-ceph\x2dmgr.slice.
- [ 8.278122] systemd[1]: Created slice system-ceph\x2dmon.slice.
- [ 8.278360] systemd[1]: Created slice system-ceph\x2dvolume.slice.
- [ 8.278598] systemd[1]: Created slice system-getty.slice.
- [ 8.278832] systemd[1]: Created slice system-modprobe.slice.
- [ 8.279065] systemd[1]: Created slice system-postfix.slice.
- [ 8.279276] systemd[1]: Created slice User and Session Slice.
- [ 8.279326] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 8.279363] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 8.279489] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 8.279515] systemd[1]: Reached target ceph target allowing to start/stop all [email protected] instances at once.
- [ 8.279542] systemd[1]: Reached target Local Encrypted Volumes.
- [ 8.279576] systemd[1]: Reached target Paths.
- [ 8.279601] systemd[1]: Reached target Slices.
- [ 8.279617] systemd[1]: Reached target System Time Set.
- [ 8.279678] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 8.279748] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 8.282465] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 8.283762] systemd[1]: Listening on Syslog Socket.
- [ 8.283839] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 8.283889] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 8.284001] systemd[1]: Listening on Journal Audit Socket.
- [ 8.284072] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 8.284166] systemd[1]: Listening on Journal Socket.
- [ 8.284297] systemd[1]: Listening on udev Control Socket.
- [ 8.284381] systemd[1]: Listening on udev Kernel Socket.
- [ 8.284997] systemd[1]: Mounting Huge Pages File System...
- [ 8.285612] systemd[1]: Mounting POSIX Message Queue File System...
- [ 8.286207] systemd[1]: Mounting RPC Pipe File System...
- [ 8.286855] systemd[1]: Mounting Kernel Debug File System...
- [ 8.287498] systemd[1]: Mounting Kernel Trace File System...
- [ 8.287566] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
- [ 8.288512] systemd[1]: Starting Set the console keyboard layout...
- [ 8.289191] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 8.289802] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- [ 8.290414] systemd[1]: Starting Load Kernel Module configfs...
- [ 8.291020] systemd[1]: Starting Load Kernel Module drm...
- [ 8.291628] systemd[1]: Starting Load Kernel Module fuse...
- [ 8.296687] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 8.296724] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 8.298373] systemd[1]: Starting Journal Service...
- [ 8.303110] systemd[1]: Starting Load Kernel Modules...
- [ 8.303798] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 8.304696] systemd[1]: Starting Coldplug All udev Devices...
- [ 8.306782] systemd[1]: Mounted Huge Pages File System.
- [ 8.306901] systemd[1]: Mounted POSIX Message Queue File System.
- [ 8.306997] systemd[1]: Mounted Kernel Debug File System.
- [ 8.307098] systemd[1]: Mounted Kernel Trace File System.
- [ 8.307460] systemd[1]: Finished Set the console keyboard layout.
- [ 8.307789] RPC: Registered named UNIX socket transport module.
- [ 8.307791] RPC: Registered udp transport module.
- [ 8.307792] RPC: Registered tcp transport module.
- [ 8.307793] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 8.307898] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ 8.308224] systemd[1]: [email protected]: Succeeded.
- [ 8.308459] systemd[1]: Finished Load Kernel Module configfs.
- [ 8.309150] systemd[1]: Mounted RPC Pipe File System.
- [ 8.309390] systemd[1]: [email protected]: Succeeded.
- [ 8.309622] systemd[1]: Finished Load Kernel Module drm.
- [ 8.309816] systemd[1]: [email protected]: Succeeded.
- [ 8.309953] systemd[1]: Finished Load Kernel Module fuse.
- [ 8.310206] VFIO - User Level meta-driver version: 0.3
- [ 8.310776] systemd[1]: Mounting FUSE Control File System...
- [ 8.311455] systemd[1]: Mounting Kernel Configuration File System...
- [ 8.312000] EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
- [ 8.313180] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ 8.313287] systemd[1]: Mounted FUSE Control File System.
- [ 8.313363] systemd[1]: Mounted Kernel Configuration File System.
- [ 8.314062] systemd[1]: Starting opencas initialization service...
- [ 8.314556] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 8.314605] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 8.315228] systemd[1]: Starting Load/Save Random Seed...
- [ 8.315907] systemd[1]: Starting Create System Users...
- [ 8.317731] vfio_pci: add [10de:1c82[ffffffff:ffffffff]] class 0x000000/00000000
- [ 8.317743] vfio_pci: add [10de:0fb9[ffffffff:ffffffff]] class 0x000000/00000000
- [ 8.317753] vfio_pci: add [8086:3a3e[ffffffff:ffffffff]] class 0x000000/00000000
- [ 8.318733] systemd[1]: Started Device-mapper event daemon.
- [ 8.324027] Loading iSCSI transport class v2.0-870.
- [ 8.332322] iscsi: registered transport (tcp)
- [ 8.336944] systemd[1]: Finished Load/Save Random Seed.
- [ 8.337098] systemd[1]: Condition check resulted in First Boot Complete being skipped.
- [ 8.337874] systemd[1]: Finished Create System Users.
- [ 8.338703] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 8.361040] iscsi: registered transport (iser)
- [ 8.368006] systemd[1]: Finished Create Static Device Nodes in /dev.
- [ 8.369354] systemd[1]: Starting Rule-based Manager for Device Events and Files...
- [ 8.375585] spl: loading out-of-tree module taints kernel.
- [ 8.379860] znvpair: module license 'CDDL' taints kernel.
- [ 8.379862] Disabling lock debugging due to kernel taint
- [ 8.393090] systemd[1]: Started Journal Service.
- [ 8.398417] systemd-journald[560]: Received client request to flush runtime journal.
- [ 8.465860] dca service started, version 1.12.1
- [ 8.471812] ioatdma: Intel(R) QuickData Technology Driver 5.00
- [ 8.546792] ZFS: Loaded module v2.0.5-pve1, ZFS pool version 5000, ZFS filesystem version 5
- [ 8.550537] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 8.560820] pstore: Using crash dump compression: deflate
- [ 8.560830] pstore: Registered efi as persistent store backend
- [ 8.568664] input: HP WMI hotkeys as /devices/virtual/input/input10
- [ 8.592412] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
- [ 8.592417] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
- [ 8.592418] RAPL PMU: hw unit of domain package 2^-16 Joules
- [ 8.592419] RAPL PMU: hw unit of domain dram 2^-16 Joules
- [ 8.640340] cryptd: max_cpu_qlen set to 1000
- [ 8.649001] AVX version of gcm_enc/dec engaged.
- [ 8.649006] AES CTR mode by8 optimization enabled
- [ 8.670724] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
- [ 8.676457] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
- [ 8.676466] sas: ata17: end_device-2:0: cmd error handler
- [ 8.676482] sas: ata17: end_device-2:0: dev error handler
- [ 8.676508] sas: ata18: end_device-2:1: dev error handler
- [ 8.676513] sas: ata19: end_device-2:2: dev error handler
- [ 8.676517] sas: ata20: end_device-2:3: dev error handler
- [ 8.676531] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
- [ 8.696733] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
- [ 8.696740] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
- [ 8.696743] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 8.696746] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 8.696747] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 8.696749] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 8.696751] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 8.696753] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 8.728334] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
- [ 8.728342] sas: ata17: end_device-2:0: cmd error handler
- [ 8.728521] sas: ata17: end_device-2:0: dev error handler
- [ 8.728546] sas: ata18: end_device-2:1: dev error handler
- [ 8.728551] sas: ata19: end_device-2:2: dev error handler
- [ 8.728556] sas: ata20: end_device-2:3: dev error handler
- [ 8.728573] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
- [ 8.729320] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 8.729386] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 8.729441] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 8.729515] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 8.729581] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- [ 8.772529] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
- [ 8.772537] sas: ata17: end_device-2:0: cmd error handler
- [ 8.772556] sas: ata17: end_device-2:0: dev error handler
- [ 8.772581] sas: ata18: end_device-2:1: dev error handler
- [ 8.772586] sas: ata19: end_device-2:2: dev error handler
- [ 8.772590] sas: ata20: end_device-2:3: dev error handler
- [ 8.772604] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
- [ 8.822305] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
- [ 8.822336] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
- [ 8.822340] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
- [ 8.822345] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
- [ 8.822347] EDAC sbridge: Seeking for: PCI ID 8086:3c71
- [ 8.822351] EDAC sbridge: Seeking for: PCI ID 8086:3c71
- [ 8.822353] EDAC sbridge: Seeking for: PCI ID 8086:3caa
- [ 8.822358] EDAC sbridge: Seeking for: PCI ID 8086:3caa
- [ 8.822359] EDAC sbridge: Seeking for: PCI ID 8086:3cab
- [ 8.822364] EDAC sbridge: Seeking for: PCI ID 8086:3cab
- [ 8.822366] EDAC sbridge: Seeking for: PCI ID 8086:3cac
- [ 8.822370] EDAC sbridge: Seeking for: PCI ID 8086:3cac
- [ 8.822372] EDAC sbridge: Seeking for: PCI ID 8086:3cad
- [ 8.822377] EDAC sbridge: Seeking for: PCI ID 8086:3cad
- [ 8.822378] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
- [ 8.822383] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
- [ 8.822384] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
- [ 8.822389] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
- [ 8.822391] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
- [ 8.822395] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
- [ 8.822397] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
- [ 8.822401] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
- [ 8.822499] EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
- [ 8.822501] EDAC sbridge: Ver: 1.1.2
- [ 8.825478] intel_rapl_common: Found RAPL domain package
- [ 8.825480] intel_rapl_common: Found RAPL domain core
- [ 8.825483] intel_rapl_common: Found RAPL domain dram
- [ 8.825486] intel_rapl_common: RAPL package-0 domain package locked by BIOS
- [ 8.832463] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
- [ 8.832467] sas: ata17: end_device-2:0: cmd error handler
- [ 8.832479] sas: ata17: end_device-2:0: dev error handler
- [ 8.832499] sas: ata18: end_device-2:1: dev error handler
- [ 8.832503] sas: ata19: end_device-2:2: dev error handler
- [ 8.832505] sas: ata20: end_device-2:3: dev error handler
- [ 8.832532] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
- [ 8.852332] Adding 8388604k swap on /dev/mapper/pve-swap. Priority:-2 extents:1 across:8388604k SSFS
- [ 8.876423] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
- [ 8.876429] sas: ata17: end_device-2:0: cmd error handler
- [ 8.876440] sas: ata17: end_device-2:0: dev error handler
- [ 8.876443] sas: ata18: end_device-2:1: dev error handler
- [ 8.876451] sas: ata20: end_device-2:3: dev error handler
- [ 8.876451] sas: ata19: end_device-2:2: dev error handler
- [ 8.876461] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
- [ 8.920344] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
- [ 8.920347] sas: ata17: end_device-2:0: cmd error handler
- [ 8.920354] sas: ata17: end_device-2:0: dev error handler
- [ 8.920371] sas: ata18: end_device-2:1: dev error handler
- [ 8.920375] sas: ata19: end_device-2:2: dev error handler
- [ 8.920378] sas: ata20: end_device-2:3: dev error handler
- [ 8.920410] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
- [ 38.593350] audit: type=1400 audit(1630698936.522:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1690 comm="apparmor_parser"
- [ 38.594198] audit: type=1400 audit(1630698936.522:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1691 comm="apparmor_parser"
- [ 38.594794] audit: type=1400 audit(1630698936.522:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1694 comm="apparmor_parser"
- [ 38.594800] audit: type=1400 audit(1630698936.522:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1694 comm="apparmor_parser"
- [ 38.595858] audit: type=1400 audit(1630698936.522:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1689 comm="apparmor_parser"
- [ 38.595863] audit: type=1400 audit(1630698936.522:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1689 comm="apparmor_parser"
- [ 38.595865] audit: type=1400 audit(1630698936.522:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1689 comm="apparmor_parser"
- [ 38.597704] audit: type=1400 audit(1630698936.526:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1693 comm="apparmor_parser"
- [ 38.598734] audit: type=1400 audit(1630698936.526:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=1696 comm="apparmor_parser"
- [ 38.599029] audit: type=1400 audit(1630698936.526:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/chronyd" pid=1692 comm="apparmor_parser"
- [ 38.691864] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 38.691870] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
- [ 39.553768] vmbr0: port 1(eno1) entered blocking state
- [ 39.553775] vmbr0: port 1(eno1) entered disabled state
- [ 39.554952] device eno1 entered promiscuous mode
- [ 39.684313] e1000e 0000:00:19.0: Some CPU C-states have been disabled in order to enable jumbo frames
- [ 39.912319] vmbr1: port 1(ens3) entered blocking state
- [ 39.912327] vmbr1: port 1(ens3) entered disabled state
- [ 39.912441] device ens3 entered promiscuous mode
- [ 39.939935] mlx4_en: ens3: Steering Mode 1
- [ 39.955869] vmbr1: port 1(ens3) entered blocking state
- [ 39.955876] vmbr1: port 1(ens3) entered forwarding state
- [ 40.416393] bpfilter: Loaded bpfilter_umh pid 2107
- [ 40.416686] Started bpfilter
- [ 41.861993] Initializing XFRM netlink socket
- [ 43.070139] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- [ 43.070186] vmbr0: port 1(eno1) entered blocking state
- [ 43.070189] vmbr0: port 1(eno1) entered forwarding state
- [ 43.070251] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
- [ 77.256382] sctp: Hash tables configured (bind 1024/1024)
Add Comment
Please, Sign In to add comment