dtorkin@ubuntu1:~/Desktop/practice$ nc localhost 12346
EVENT;SVM_ID:0;Type:LinkStatus;Details:NewStatus=2,AssignedLAK=0x08,ProtocolStage=1
SENT;SVM_ID:0;Type:128;Num:0;LAK:0x08
RECV;SVM_ID:0;Type:129;Num:0;LAK:0x01;Details:TestModeRecv
SENT;SVM_ID:0;Type:1;Num:1;LAK:0x08
RECV;SVM_ID:0;Type:3;Num:1;LAK:0x01;Details:TestModeRecv
SENT;SVM_ID:0;Type:2;Num:2;LAK:0x08
RECV;SVM_ID:0;Type:4;Num:2;LAK:0x01;Details:TestModeRecv
SENT;SVM_ID:0;Type:6;Num:3;LAK:0x08
RECV;SVM_ID:0;Type:7;Num:3;LAK:0x01;Details:TestModeRecv



dtorkin@ubuntu1:~/Desktop/practice$ sudo ./uvm_app --wait-for-gui OR
[sudo] пароль для dtorkin:
UVM: Option --wait-for-gui enabled. UVM will wait for GUI client connection before proceeding with SVM operations.
UVM: Effective RadarMode selected: OP
UVM: Загрузка конфигурации из 'config.ini'...
Configuration parsed successfully from 'config.ini'.
--- UVM Effective Configuration ---
  Interface Type:               ethernet
  SVM Response Timeout:         7.00 seconds
  SVM Keep-Alive Timeout:       20.00 seconds
  GUI Listen Port:              12346
  Main Loop Idle Sleep:         100000 us
  Target IP for SVMs (UVM connects to): 192.168.189.129
  Number of SVMs with explicit config in INI: 1
  SVM Slot 0 Configuration (Explicitly loaded: Yes):
    Connect Port:               8080
    Assigned LAK:               0x08
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 1 Configuration (Explicitly loaded: No):
    Connect Port:               8081
    Assigned LAK:               0x09
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 2 Configuration (Explicitly loaded: No):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 3 Configuration (Explicitly loaded: No):
    Connect Port:               8083
    Assigned LAK:               0x0B
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
----------------------------------
UVM: Найдено 1 конфигураций SVM в файле.
Thread-safe UVM request queue created with capacity 50
Thread-safe UVM Response queue created with capacity 50
UVM: Подключение к сконфигурированным SVM...
UVM: Попытка подключения к SVM ID 0 (IP: 192.168.189.129, Порт: 8080, Ожидаемый LAK: 0x08)...
Ethernet: Connected to 192.168.189.129:8080 (handle: 3)
UVM: Успешное подключение к SVM ID 0 (Дескриптор: 3).
UVM: Подключено к 1 из 1 (найденных в конфиге) SVM.
UVM: Запуск рабочих потоков (Sender, Receivers, GUI Server)...
UVM Sender thread started.
UVM Receiver thread started for SVM ID 0 (handle: 3).
GUI Server: Starting listener on port 12346
GUI Server: Waiting for GUI connection on port 12346...
UVM: Ожидание подключения GUI клиента к порту 12346 (или Ctrl+C для выхода)...
GUI Server: Accepted connection from 127.0.0.1:54452 (FD 5)
GUI Server: Sending initial state to new GUI client (FD 5).
GUI Server: Initial state sent to GUI client (FD 5).
UVM: GUI клиент подключен. Продолжение операций с SVM.
UVM: Начало основного цикла работы. Выбранный режим РЛС: OP
UVM TEST MODE: Focusing on SVM ID 0 (LAK 0x08)
UVM TEST MODE: Начало упрощенного теста для SVM ID 0.

UVM TEST MODE: Current Stage: NEEDS_INIT_CHANNEL, SVM ID: 0
UVM TEST MODE: Отправка SVM 0: Инициализация канала (128) (ожидаем Подтверждение инициализации (129))
Отправка сообщения через Ethernet: Тип=128, Номер=0, Длина тела=2, Общий размер=8, Handle=3
UVM TEST MODE: SVM 0 - Ожидание ответа типа Подтверждение инициализации (129)...
Получено сообщение через Ethernet: Тип=129, Номер=0, Длина тела=12, Handle=3
UVM TEST MODE: SVM 0 - Получен ответ: Подтверждение инициализации (129) (номер #0)
UVM TEST MODE: SVM 0 - Получен ОЖИДАЕМЫЙ ответ.
UVM TEST MODE: Пауза перед следующим этапом...

UVM TEST MODE: Current Stage: NEEDS_PROVESTI_KONTROL, SVM ID: 0
UVM TEST MODE: Отправка SVM 0: Провести контроль (1) (ожидаем Подтверждение контроля (3))
Отправка сообщения через Ethernet: Тип=1, Номер=1, Длина тела=1, Общий размер=7, Handle=3
UVM TEST MODE: SVM 0 - Ожидание ответа типа Подтверждение контроля (3)...
Получено сообщение через Ethernet: Тип=3, Номер=1, Длина тела=8, Handle=3
UVM TEST MODE: SVM 0 - Получен ответ: Подтверждение контроля (3) (номер #1)
UVM TEST MODE: SVM 0 - Получен ОЖИДАЕМЫЙ ответ.
UVM TEST MODE: SVM 0 - Получено 'Подтверждение контроля', теперь ждем 'Результаты контроля'.
UVM TEST MODE: Пауза перед следующим этапом...

UVM TEST MODE: Current Stage: Неизвестная стадия протокола, SVM ID: 0
UVM TEST MODE: Отправка SVM 0: Выдать результаты контроля (2) (ожидаем Результаты контроля (4))
Отправка сообщения через Ethernet: Тип=2, Номер=2, Длина тела=1, Общий размер=7, Handle=3
UVM TEST MODE: SVM 0 - Ожидание ответа типа Результаты контроля (4)...
Получено сообщение через Ethernet: Тип=4, Номер=2, Длина тела=8, Handle=3
UVM TEST MODE: SVM 0 - Получен ответ: Результаты контроля (4) (номер #2)
UVM TEST MODE: SVM 0 - Получен ОЖИДАЕМЫЙ ответ.
UVM TEST MODE: Пауза перед следующим этапом...

UVM TEST MODE: Current Stage: NEEDS_VYDAT_SOSTOYANIE, SVM ID: 0
UVM TEST MODE: Отправка SVM 0: Выдать состояние линии (6) (ожидаем Состояние линии (7))
Отправка сообщения через Ethernet: Тип=6, Номер=3, Длина тела=0, Общий размер=6, Handle=3
UVM TEST MODE: SVM 0 - Ожидание ответа типа Состояние линии (7)...
Получено сообщение через Ethernet: Тип=7, Номер=3, Длина тела=16, Handle=3
UVM TEST MODE: SVM 0 - Получен ответ: Состояние линии (7) (номер #3)
UVM TEST MODE: SVM 0 - Получен ОЖИДАЕМЫЙ ответ.
UVM TEST MODE: Пауза перед следующим этапом...

UVM TEST MODE: Current Stage: OBSERVATION_PREPARED, SVM ID: 0
UVM TEST MODE: Подготовка к наблюдению для SVM ID 0 УСПЕШНО ЗАВЕРШЕНА.
UVM TEST MODE: Упрощенный тест для SVM ID 0 ЗАВЕРШЕН УСПЕШНО.
UVM: Упрощенный тест завершен. Ожидание Ctrl+C для полного выхода программы...

dtorkin@ubuntu1:~/Desktop/practice$ sudo ./svm_app
[sudo] пароль для dtorkin:
SVM Multi-Port Server starting...
Message handlers initialized.
SVM: Loading configuration...
Configuration parsed successfully from 'config.ini'.
--- UVM Effective Configuration ---
  Interface Type:               ethernet
  SVM Response Timeout:         7.00 seconds
  SVM Keep-Alive Timeout:       20.00 seconds
  GUI Listen Port:              12346
  Main Loop Idle Sleep:         100000 us
  Target IP for SVMs (UVM connects to): 192.168.189.129
  Number of SVMs with explicit config in INI: 1
  SVM Slot 0 Configuration (Explicitly loaded: Yes):
    Connect Port:               8080
    Assigned LAK:               0x08
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 1 Configuration (Explicitly loaded: No):
    Connect Port:               8081
    Assigned LAK:               0x09
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 2 Configuration (Explicitly loaded: No):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 3 Configuration (Explicitly loaded: No):
    Connect Port:               8083
    Assigned LAK:               0x0B
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
----------------------------------
SVM: Will attempt to start 1 instances based on config.
DEBUG SVM MAIN - Instance 0 Settings: LAK=0x08, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
DEBUG SVM MAIN - Instance 1 Settings: LAK=0x09, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
DEBUG SVM MAIN - Instance 2 Settings: LAK=0x0A, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
DEBUG SVM MAIN - Instance 3 Settings: LAK=0x0B, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
SVM: Loading configuration...
Configuration parsed successfully from 'config.ini'.
--- UVM Effective Configuration ---
  Interface Type:               ethernet
  SVM Response Timeout:         7.00 seconds
  SVM Keep-Alive Timeout:       20.00 seconds
  GUI Listen Port:              12346
  Main Loop Idle Sleep:         100000 us
  Target IP for SVMs (UVM connects to): 192.168.189.129
  Number of SVMs with explicit config in INI: 1
  SVM Slot 0 Configuration (Explicitly loaded: Yes):
    Connect Port:               8080
    Assigned LAK:               0x08
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 1 Configuration (Explicitly loaded: No):
    Connect Port:               8081
    Assigned LAK:               0x09
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 2 Configuration (Explicitly loaded: No):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 3 Configuration (Explicitly loaded: No):
    Connect Port:               8083
    Assigned LAK:               0x0B
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
----------------------------------
SVM: Will attempt to start 1 instances based on config.
Thread-safe QueuedMessage queue created with capacity 100
SVM: Listener thread 0 initiated for Port 8080 (LAK 0x08).
SVM: Starting common threads (Timer, Sender)...
SVM: All common threads started. 1 listeners active. Running...
Ethernet: Listening on port 8080 (handle: 3)
Listener thread started for SVM ID 0 (LAK 0x08, Port 8080, Listen FD 3)
Listener (SVM 0): Waiting for connection on port 8080...
SVM Sender thread started (reads global outgoing queue).
SVM Main: Waiting for shutdown signal...
SVM Timer thread started.
Listener (SVM 0): Accepted connection from 192.168.189.128:52116 (Client FD 4)
Thread-safe QueuedMessage queue created with capacity 100
Listener (SVM 0): Instance activated. Worker threads started.
SVM Receiver thread started for instance 0 (handle: 4).
SVM Processor thread started for instance 0.
Получено сообщение через Ethernet: Тип=128, Номер=0, Длина тела=2, Handle=4
Processor (Inst 0): Обработка 'Инициализация канала'
  Параметры: LAUVM=0x1, LAK=0x08 (assigned)
  SVM (Inst 0): Эмуляция выключения лазера...
  Ответ 'Подтверждение инициализации' сформирован (LAK=0x08).
Отправка сообщения через Ethernet: Тип=129, Номер=0, Длина тела=12, Общий размер=18, Handle=4
Получено сообщение через Ethernet: Тип=1, Номер=1, Длина тела=1, Handle=4
Processor (Inst 0): Обработка 'Провести контроль'
  SVM (Inst 0): Эмуляция самопроверки...
  Ответ 'Подтверждение контроля' сформирован.
Отправка сообщения через Ethernet: Тип=3, Номер=1, Длина тела=8, Общий размер=14, Handle=4
Получено сообщение через Ethernet: Тип=2, Номер=2, Длина тела=1, Handle=4
Processor (Inst 0): Обработка 'Выдать результаты контроля'
  Ответ 'Результаты контроля' сформирован.
Отправка сообщения через Ethernet: Тип=4, Номер=2, Длина тела=8, Общий размер=14, Handle=4
Получено сообщение через Ethernet: Тип=6, Номер=3, Длина тела=0, Handle=4
Processor (Inst 0): Обработка 'Выдать состояние линии'
  Ответ 'Состояние линии' сформирован.
Отправка сообщения через Ethernet: Тип=7, Номер=3, Длина тела=16, Общий размер=22, Handle=4

dtorkin@ubuntu1:~/Desktop/practice$ sudo ./svm_app
SVM Multi-Port Server starting...
Message handlers initialized.
SVM: Loading configuration...
Configuration parsed successfully from 'config.ini'.
--- UVM Effective Configuration ---
  Interface Type:               ethernet
  SVM Response Timeout:         6.00 seconds
  SVM Keep-Alive Timeout:       18.00 seconds
  GUI Listen Port:              12346
  Main Loop Idle Sleep:         60000 us
  Target IP for SVMs (UVM connects to): 192.168.189.129
  Number of SVMs with explicit config in INI: 3
  SVM Slot 0 Configuration (Explicitly loaded: Yes):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 1 Configuration (Explicitly loaded: Yes):
    Connect Port:               8081
    Assigned LAK:               0x09
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 2 Configuration (Explicitly loaded: No):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 3 Configuration (Explicitly loaded: Yes):
    Connect Port:               8083
    Assigned LAK:               0x0B
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
----------------------------------
SVM: Will attempt to start 3 instances based on config.
DEBUG SVM MAIN - Instance 0 Settings: LAK=0x0A, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
DEBUG SVM MAIN - Instance 1 Settings: LAK=0x09, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
DEBUG SVM MAIN - Instance 2 Settings: LAK=0x0A, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
DEBUG SVM MAIN - Instance 3 Settings: LAK=0x0B, simulate_control_failure=0, disconnect_after=-1, simulate_timeout=0, send_warning=0, tks=1
SVM: Loading configuration...
Configuration parsed successfully from 'config.ini'.
--- UVM Effective Configuration ---
  Interface Type:               ethernet
  SVM Response Timeout:         6.00 seconds
  SVM Keep-Alive Timeout:       18.00 seconds
  GUI Listen Port:              12346
  Main Loop Idle Sleep:         60000 us
  Target IP for SVMs (UVM connects to): 192.168.189.129
  Number of SVMs with explicit config in INI: 3
  SVM Slot 0 Configuration (Explicitly loaded: Yes):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 1 Configuration (Explicitly loaded: Yes):
    Connect Port:               8081
    Assigned LAK:               0x09
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 2 Configuration (Explicitly loaded: No):
    Connect Port:               8082
    Assigned LAK:               0x0A
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
  SVM Slot 3 Configuration (Explicitly loaded: Yes):
    Connect Port:               8083
    Assigned LAK:               0x0B
    Simulate Control Failure:   No
    Disconnect After Messages:  -1
    Simulate Response Timeout:  No
    Send Warning on Confirm:    No (TKS: 1)
----------------------------------
SVM: Will attempt to start 3 instances based on config.
Thread-safe QueuedMessage queue created with capacity 300
SVM: Listener thread 0 initiated for Port 8082 (LAK 0x0A).
SVM: Listener thread 1 initiated for Port 8081 (LAK 0x09).
SVM: Listener thread 3 initiated for Port 8083 (LAK 0x0B).
SVM: Starting common threads (Timer, Sender)...
Ethernet: Listening on port 8081 (handle: 3)
Listener thread started for SVM ID 1 (LAK 0x09, Port 8081, Listen FD 3)
Listener (SVM 1): Waiting for connection on port 8081...
Ethernet: Listening on port 8083 (handle: 6)
Listener thread started for SVM ID 3 (LAK 0x0B, Port 8083, Listen FD 6)
Listener (SVM 3): Waiting for connection on port 8083...
Ethernet: Listening on port 8082 (handle: 4)
Listener thread started for SVM ID 0 (LAK 0x0A, Port 8082, Listen FD 4)
Listener (SVM 0): Waiting for connection on port 8082...
SVM Timer thread started.
SVM: All common threads started. 3 listeners active. Running...
SVM Main: Waiting for shutdown signal...
SVM Sender thread started (reads global outgoing queue).
Listener (SVM 0): Accepted connection from 192.168.189.128:59196 (Client FD 8)
Thread-safe QueuedMessage queue created with capacity 100
Listener (SVM 0): Instance activated. Worker threads started.
SVM Receiver thread started for instance 0 (handle: 8).
SVM Processor thread started for instance 0.
Listener (SVM 1): Accepted connection from 192.168.189.128:59666 (Client FD 5)
Thread-safe QueuedMessage queue created with capacity 100
Listener (SVM 1): Instance activated. Worker threads started.
SVM Processor thread started for instance 1.
SVM Receiver thread started for instance 1 (handle: 5).
Listener (SVM 3): Accepted connection from 192.168.189.128:39224 (Client FD 7)
Thread-safe QueuedMessage queue created with capacity 100
SVM Receiver thread started for instance 3 (handle: 7).
SVM Receiver thread finished for instance 3.
Listener (SVM 3): Instance activated. Worker threads started.
Listener (SVM 3): Receiver thread joined.
SVM Processor thread started for instance 3.

Получено сообщение через Ethernet: Тип=128, Номер=0, Длина тела=2, Handle=8
Processor (Inst 0): Обработка 'Инициализация канала'
  Параметры: LAUVM=0x1, LAK=0x0A (assigned)
  SVM (Inst 0): Эмуляция выключения лазера...
  Ответ 'Подтверждение инициализации' сформирован (LAK=0x0A).
Получено сообщение через Ethernet: Тип=128, Номер=0, Длина тела=2, Handle=5
Processor (Inst 1): Обработка 'Инициализация канала'
  Параметры: LAUVM=0x1, LAK=0x09 (assigned)
  SVM (Inst 1): Эмуляция выключения лазера...
Отправка сообщения через Ethernet: Тип=129, Номер=0, Длина тела=12, Общий размер=18, Handle=8
  Ответ 'Подтверждение инициализации' сформирован (LAK=0x09).
Отправка сообщения через Ethernet: Тип=129, Номер=0, Длина тела=12, Общий размер=18, Handle=5