Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- EFI stub: Booting Linux Kernel...
- EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
- EFI stub: Using DTB from configuration table
- EFI stub: Exiting boot services and installing virtual address map...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.4.0-00004-gef51ab9a635b (jerome@matebook) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #262 SMP PREEMPT Wed Dec 4 09:39:58 CET 2019
- [ 0.000000] Machine model: HiKey960
- [ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '')
- [ 0.000000] printk: bootconsole [pl11] enabled
- [ 0.000000] printk: debug: ignoring loglevel setting.
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0xbe7dc118 MEMRESERVE=0xba6e6018
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000bc400000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xbf9d6800-0xbf9d7fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000bfffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001abfffff]
- [ 0.000000] node 0: [mem 0x000000001ad88000-0x0000000031ffffff]
- [ 0.000000] node 0: [mem 0x0000000032101000-0x000000003dffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000089b7ffff]
- [ 0.000000] node 0: [mem 0x0000000089cc0000-0x00000000ba49ffff]
- [ 0.000000] node 0: [mem 0x00000000ba4a0000-0x00000000ba6dffff]
- [ 0.000000] node 0: [mem 0x00000000ba6e0000-0x00000000ba6e7fff]
- [ 0.000000] node 0: [mem 0x00000000ba6e8000-0x00000000ba6ebfff]
- [ 0.000000] node 0: [mem 0x00000000ba6ec000-0x00000000bf6affff]
- [ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6effff]
- [ 0.000000] node 0: [mem 0x00000000bf6f0000-0x00000000bf6fffff]
- [ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bf74ffff]
- [ 0.000000] node 0: [mem 0x00000000bf750000-0x00000000bfffffff]
- [ 0.000000] Zeroed struct page in unavailable ranges: 624 pages
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
- [ 0.000000] On node 0 totalpages: 777271
- [ 0.000000] DMA32 zone: 12288 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 777271 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] percpu: Embedded 31 pages/cpu s86488 r8192 d32296 u126976
- [ 0.000000] pcpu-alloc: s86488 r8192 d32296 u126976 alloc=31*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 764983
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/Image console=tty0 console=ttyAMA6,115200n8 earlycon=pl011,0xfff32000 root=/dev/disk/by-partlabel/system rootwait rw ignore_loglevel efi=noruntime
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 2969900K/3109084K available (14972K kernel code, 2730K rwdata, 7476K rodata, 7936K init, 473K bss, 106416K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] ftrace: allocating 52123 entries in 204 pages
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x4b8 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
- [ 0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
- [ 0.008507] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
- [ 0.019135] Console: colour dummy device 80x25
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.4.0-00004-gef51ab9a635b (jerome@matebook) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #262 SMP PREEMPT Wed Dec 4 09:39:58 CET 2019
- [ 0.000000] Machine model: HiKey960
- [ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '')
- [ 0.000000] printk: bootconsole [pl11] enabled
- [ 0.000000] printk: debug: ignoring loglevel setting.
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0xbe7dc118 MEMRESERVE=0xba6e6018
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000bc400000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xbf9d6800-0xbf9d7fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000bfffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001abfffff]
- [ 0.000000] node 0: [mem 0x000000001ad88000-0x0000000031ffffff]
- [ 0.000000] node 0: [mem 0x0000000032101000-0x000000003dffffff]
- [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000089b7ffff]
- [ 0.000000] node 0: [mem 0x0000000089cc0000-0x00000000ba49ffff]
- [ 0.000000] node 0: [mem 0x00000000ba4a0000-0x00000000ba6dffff]
- [ 0.000000] node 0: [mem 0x00000000ba6e0000-0x00000000ba6e7fff]
- [ 0.000000] node 0: [mem 0x00000000ba6e8000-0x00000000ba6ebfff]
- [ 0.000000] node 0: [mem 0x00000000ba6ec000-0x00000000bf6affff]
- [ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6effff]
- [ 0.000000] node 0: [mem 0x00000000bf6f0000-0x00000000bf6fffff]
- [ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bf74ffff]
- [ 0.000000] node 0: [mem 0x00000000bf750000-0x00000000bfffffff]
- [ 0.000000] Zeroed struct page in unavailable ranges: 624 pages
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
- [ 0.000000] On node 0 totalpages: 777271
- [ 0.000000] DMA32 zone: 12288 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 777271 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Trusted OS migration not required
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] percpu: Embedded 31 pages/cpu s86488 r8192 d32296 u126976
- [ 0.000000] pcpu-alloc: s86488 r8192 d32296 u126976 alloc=31*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 764983
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/Image console=tty0 console=ttyAMA6,115200n8 earlycon=pl011,0xfff32000 root=/dev/disk/by-partlabel/system rootwait rw ignore_loglevel efi=noruntime
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 2969900K/3109084K available (14972K kernel code, 2730K rwdata, 7476K rodata, 7936K init, 473K bss, 106416K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] ftrace: allocating 52123 entries in 204 pages
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x4b8 with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
- [ 0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
- [ 0.008507] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
- [ 0.019135] Console: colour dummy device 80x25
- [ 0.463823] printk: console [tty0] enabled
- [ 0.468154] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
- [ 0.478424] pid_max: default: 32768 minimum: 301
- [ 0.483208] LSM: Security Framework initializing
- [ 0.487981] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.495522] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.527597] ASID allocator initialised with 32768 entries
- [ 0.541131] rcu: Hierarchical SRCU implementation.
- [ 0.555944] EFI runtime services will be disabled.
- [ 0.568854] smp: Bringing up secondary CPUs ...
- [ 0.605918] Detected VIPT I-cache on CPU1
- [ 0.606029] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.637832] Detected VIPT I-cache on CPU2
- [ 0.637868] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.669841] Detected VIPT I-cache on CPU3
- [ 0.669866] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.703432] CPU features: detected: ARM erratum 858921
- [ 0.703473] Detected VIPT I-cache on CPU4
- [ 0.703492] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.703502] arch_timer: CPU4: Trapping CNTVCT access
- [ 0.703508] CPU4: Booted secondary processor 0x0000000100 [0x410fd091]
- [ 0.733867] Detected VIPT I-cache on CPU5
- [ 0.733880] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.733885] arch_timer: CPU5: Trapping CNTVCT access
- [ 0.733890] CPU5: Booted secondary processor 0x0000000101 [0x410fd091]
- [ 0.765907] Detected VIPT I-cache on CPU6
- [ 0.765919] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.765924] arch_timer: CPU6: Trapping CNTVCT access
- [ 0.765929] CPU6: Booted secondary processor 0x0000000102 [0x410fd091]
- [ 0.797928] Detected VIPT I-cache on CPU7
- [ 0.797941] arch_timer: Enabling local workaround for ARM erratum 858921
- [ 0.797946] arch_timer: CPU7: Trapping CNTVCT access
- [ 0.797950] CPU7: Booted secondary processor 0x0000000103 [0x410fd091]
- [ 0.798007] smp: Brought up 1 node, 8 CPUs
- [ 0.929027] SMP: Total of 8 processors activated.
- [ 0.933785] CPU features: detected: 32-bit EL0 Support
- [ 0.938989] CPU features: detected: CRC32 instructions
- [ 0.952706] CPU: All CPU(s) started at EL2
- [ 0.956878] alternatives: patching kernel code
- [ 0.962522] devtmpfs: initialized
- [ 0.969469] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.979331] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.986972] pinctrl core: initialized pinctrl subsystem
- [ 0.992902] DMI not present or invalid.
- [ 0.996963] NET: Registered protocol family 16
- [ 1.010147] DMA: preallocated 256 KiB pool for atomic allocations
- [ 1.016312] audit: initializing netlink subsys (disabled)
- [ 1.021841] audit: type=2000 audit(0.752:1): state=initialized audit_enabled=0 res=1
- [ 1.029686] cpuidle: using governor menu
- [ 1.033854] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 1.041418] Serial: AMBA PL011 UART driver
- [ 1.060514] hi3660-mbox e896b000.mailbox: Mailbox enabled
- [ 1.076506] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 1.083287] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 1.090060] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 1.096832] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 1.105061] cryptd: max_cpu_qlen set to 1000
- [ 1.111671] ACPI: Interpreter disabled.
- [ 1.116263] iommu: Default domain type: Translated
- [ 1.121372] vgaarb: loaded
- [ 1.124268] SCSI subsystem initialized
- [ 1.128146] libata version 3.00 loaded.
- [ 1.132173] usbcore: registered new interface driver usbfs
- [ 1.137740] usbcore: registered new interface driver hub
- [ 1.143143] usbcore: registered new device driver usb
- [ 1.148541] pps_core: LinuxPPS API ver. 1 registered
- [ 1.153563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.162803] PTP clock support registered
- [ 1.166812] EDAC MC: Ver: 3.0.0
- [ 1.170280] Registered efivars operations
- [ 1.174635] FPGA manager framework
- [ 1.178102] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.184821] clocksource: Switched to clocksource arch_sys_counter
- [ 1.488655] VFS: Disk quotas dquot_6.6.0
- [ 1.492677] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.499738] pnp: PnP ACPI: disabled
- [ 1.506496] thermal_sys: Registered thermal governor 'step_wise'
- [ 1.506498] thermal_sys: Registered thermal governor 'power_allocator'
- [ 1.512832] NET: Registered protocol family 2
- [ 1.524056] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 1.532709] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 1.540833] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 1.548436] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.555088] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.561908] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.569234] NET: Registered protocol family 1
- [ 1.573870] RPC: Registered named UNIX socket transport module.
- [ 1.579860] RPC: Registered udp transport module.
- [ 1.584615] RPC: Registered tcp transport module.
- [ 1.589367] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.596138] PCI: CLS 0 bytes, default 64
- [ 1.600197] Unpacking initramfs...
- [ 1.782695] Freeing initrd memory: 7164K
- [ 1.787589] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 1.796070] hw perfevents: enabled with armv8_cortex_a73 PMU driver, 7 counters available
- [ 1.804492] kvm [1]: IPA Size Limit: 40bits
- [ 1.809195] kvm [1]: vgic interrupt IRQ1
- [ 1.813299] kvm [1]: Hyp mode initialized successfully
- [ 1.843196] Initialise system trusted keyrings
- [ 1.847859] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 1.857392] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.863645] NFS: Registering the id_resolver key type
- [ 1.868766] Key type id_resolver registered
- [ 1.872999] Key type id_legacy registered
- [ 1.877055] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.883904] 9p: Installing v9fs 9p2000 file system support
- [ 1.897657] Key type asymmetric registered
- [ 1.901801] Asymmetric key parser 'x509' registered
- [ 1.906749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 1.914229] io scheduler mq-deadline registered
- [ 1.918806] io scheduler kyber registered
- [ 1.925264] pinctrl-single e896c000.pinmux: 124 pins, size 496
- [ 1.931267] pinctrl-single ff37e000.pinmux: 6 pins, size 24
- [ 1.936970] pinctrl-single ff3b6000.pinmux: 12 pins, size 48
- [ 1.942755] pinctrl-single ff3fd000.pinmux: 6 pins, size 24
- [ 1.948472] pinctrl-single fff11000.pinmux: 42 pins, size 168
- [ 1.954427] pinctrl-single e896c800.pinmux: 128 pins, size 512
- [ 1.960402] pinctrl-single ff3b6800.pinmux: 6 pins, size 24
- [ 1.966099] pinctrl-single ff3fd800.pinmux: 6 pins, size 24
- [ 1.971790] pinctrl-single ff37e800.pinmux: 6 pins, size 24
- [ 1.977527] pinctrl-single fff11800.pinmux: 47 pins, size 188
- [ 1.984241] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
- [ 1.990426] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
- [ 1.996595] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
- [ 2.002768] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
- [ 2.008942] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
- [ 2.015120] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
- [ 2.021314] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
- [ 2.027491] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
- [ 2.033668] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
- [ 2.039843] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
- [ 2.046015] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
- [ 2.052189] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
- [ 2.058362] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
- [ 2.064533] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
- [ 2.070703] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
- [ 2.076887] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
- [ 2.083056] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
- [ 2.089228] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
- [ 2.095402] pl061_gpio ff3b4000.gpio: PL061 GPIO chip registered
- [ 2.101586] pl061_gpio ff3b5000.gpio: PL061 GPIO chip registered
- [ 2.107758] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
- [ 2.113929] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
- [ 2.120109] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
- [ 2.126285] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
- [ 2.132463] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
- [ 2.138644] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
- [ 2.144824] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
- [ 2.150998] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
- [ 2.157172] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
- [ 2.202063] kirin-pcie f4000000.pcie: host bridge /soc/pcie@f4000000 ranges:
- [ 2.209202] kirin-pcie f4000000.pcie: MEM 0xf6000000..0xf7ffffff -> 0x00000000
- [ 3.220583] kirin-pcie f4000000.pcie: Link Fail
- [ 3.225229] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
- [ 3.231657] pci_bus 0000:00: root bus resource [bus 00-01]
- [ 3.237204] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
- [ 3.247519] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
- [ 3.253626] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
- [ 3.260078] pci 0000:00:00.0: supports D1 D2
- [ 3.264393] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 3.272055] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
- [ 3.284322] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
- [ 3.291193] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 3.296694] pcieport 0000:00:00.0: PME: Signaling with IRQ 66
- [ 3.302626] pcieport 0000:00:00.0: AER: enabled with IRQ 66
- [ 3.308779] EINJ: ACPI disabled.
- [ 3.314476] k3-dma fdf30000.dma: initialized
- [ 3.318843] k3-dma e804b000.dma-controller: dma-channel-mask doesn't exist, considering all as available.
- [ 3.329169] k3-dma e804b000.dma-controller: initialized
- [ 3.338044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 3.345428] SuperH (H)SCI(F) driver initialized
- [ 3.350244] msm_serial: driver initialized
- [ 3.359536] loop: module loaded
- [ 3.364269] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 3.375006] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
- [ 3.385383] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
- [ 3.395848] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
- [ 3.433379] scsi host0: ufshcd
- [ 3.439501] libphy: Fixed MDIO Bus: probed
- [ 3.443768] tun: Universal TUN/TAP device driver, 1.6
- [ 3.449241] thunder_xcv, ver 1.0
- [ 3.452511] thunder_bgx, ver 1.0
- [ 3.455793] nicpf, ver 1.0
- [ 3.458797] hclge is initializing
- [ 3.462147] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
- [ 3.469447] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 3.474841] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 3.480736] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.486737] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 3.493773] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 3.499421] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 3.507338] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 3.513466] sky2: driver version 1.30
- [ 3.517463] usbcore: registered new interface driver asix
- [ 3.522934] usbcore: registered new interface driver ax88179_178a
- [ 3.529105] usbcore: registered new interface driver cdc_ether
- [ 3.535012] usbcore: registered new interface driver dm9601
- [ 3.540654] usbcore: registered new interface driver net1080
- [ 3.542704] ufshcd-hisi ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 3.546385] usbcore: registered new interface driver cdc_subset
- [ 3.564943] usbcore: registered new interface driver zaurus
- [ 3.570596] usbcore: registered new interface driver cdc_ncm
- [ 3.576383] VFIO - User Level meta-driver version: 0.3
- [ 3.582266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.588876] ehci-pci: EHCI PCI platform driver
- [ 3.593385] ehci-platform: EHCI generic platform driver
- [ 3.598720] ehci-orion: EHCI orion driver
- [ 3.602815] ehci-exynos: EHCI EXYNOS driver
- [ 3.607079] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.613334] ohci-pci: OHCI PCI platform driver
- [ 3.617840] ohci-platform: OHCI generic platform driver
- [ 3.623170] ohci-exynos: OHCI EXYNOS driver
- [ 3.627604] usbcore: registered new interface driver usb-storage
- [ 3.634950] rtc-pl031 fff04000.rtc: registered as rtc0
- [ 3.640423] i2c /dev entries driver
- [ 3.645967] sp805-wdt e8a06000.watchdog: registration successful
- [ 3.652146] sp805-wdt e8a07000.watchdog: registration successful
- [ 3.656541] ufshcd-hisi ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
- [ 3.670483] sdhci: Secure Digital Host Controller Interface driver
- [ 3.671609] ufshcd-hisi ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
- [ 3.676730] sdhci: Copyright(c) Pierre Ossman
- [ 3.690334] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.692579] Synopsys Designware Multimedia Card Interface Driver
- [ 3.703763] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.707256] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.719061] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.728264] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
- [ 3.738615] scsi 0:0:0:0: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.741082] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
- [ 3.751519] sd 0:0:0:0: Power-on or device reset occurred
- [ 3.752425] scsi 0:0:0:1: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.754310] sd 0:0:0:1: Power-on or device reset occurred
- [ 3.755669] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
- [ 3.761863] scsi 0:0:0:2: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.762402] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.762529] sd 0:0:0:1: [sdb] Write Protect is off
- [ 3.762533] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 3.762942] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.763210] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes
- [ 3.764141] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.764260] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.764263] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 3.764694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.765052] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes
- [ 3.769306] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
- [ 3.776726] random: fast init done
- [ 3.780198] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
- [ 3.788488] sd 0:0:0:2: Power-on or device reset occurred
- [ 3.788523] scsi 0:0:0:3: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
- [ 3.793408] sd 0:0:0:3: Power-on or device reset occurred
- [ 3.803469] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
- [ 3.810324] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 3.810339] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 3.812797] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
- [ 3.813131] sd 0:0:0:2: [sdc] Write Protect is off
- [ 3.813134] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 3.813393] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.813536] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes
- [ 3.814378] sd 0:0:0:3: [sdd] Write Protect is off
- [ 3.817504] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.826293] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 3.827606] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 3.833835] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 3.838628] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.848484] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
- [ 3.853783] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes
- [ 3.861556] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
- [ 3.999551] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
- [ 4.004753] Alternate GPT is invalid, using primary GPT.
- [ 4.004929] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 61,32 bit host data width,256 deep fifo
- [ 4.010292] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12
- [ 4.019947] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.034195] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 4.039454] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.045909] usbcore: registered new interface driver usbhid
- [ 4.051538] usbhid: USB HID core driver
- [ 4.056298] optee: probing for conduit method from DT.
- [ 4.061498] optee: revision 3.7 (479c49dd)
- [ 4.062008] optee: dynamic shared memory is enabled
- [ 4.071172] optee: PTA_CMD_GET_DEVICES invoke function err: ffff0006
- [ 4.086611] drop_monitor: Initializing network drop monitor service
- [ 4.093017] NET: Registered protocol family 17
- [ 4.097572] 9pnet: Installing 9P2000 support
- [ 4.101910] Key type dns_resolver registered
- [ 4.106572] registered taskstats version 1
- [ 4.110712] Loading compiled-in X.509 certificates
- [ 4.119329] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
- [ 4.128780] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
- [ 4.137798] serial serial0: tty port ttyAMA4 registered
- [ 4.143144] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
- [ 4.152123] printk: console [ttyAMA6] enabled
- [ 4.152123] printk: console [ttyAMA6] enabled
- [ 4.160878] printk: bootconsole [pl11] disabled
- [ 4.160878] printk: bootconsole [pl11] disabled
- [ 4.171313] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 4.178359] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to (____ptrval____)
- [ 4.187190] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
- [ 4.197935] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 4.205018] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to (____ptrval____)
- [ 4.213850] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
- [ 4.229128] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 4.241053] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
- [ 4.247852] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
- [ 4.254206] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
- [ 4.259531] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 61,32 bit host data width,128 deep fifo
- [ 4.268917] mmc_host mmc1: card is non-removable.
- [ 4.371285] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 4.396662] input: keys as /devices/platform/keys/input/input0
- [ 4.403836] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01T00:06:40 UTC (400)
- [ 4.407173] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
- [ 4.412215] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 4.432663] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 4.438797] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 4.440458] ALSA device list:
- [ 4.450894] mmc1: new SDIO card at address 0001
- [ 4.451892] No soundcards found.
- [ 4.457334] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
- [ 4.470517] wl18xx_driver wl18xx.0.auto: Falling back to sysfs fallback for: ti-connectivity/wl18xx-conf.bin
- [ 4.480610] uart-pl011 fff32000.serial: no DMA platform data
- [ 4.490104] Freeing unused kernel memory: 7936K
- [ 4.505612] Run /init as init process
- Starting syslogd: OK
- Starting klogd: OK
- Initializing random number generator... [ 4.527724] random: dd: uninitialized urandom read (512 bytes read)
- done.
- Set permissions on /dev/tee*: chown: /dev/teepriv0: No such file or directory
- FAIL
- Starting network: OK
- Welcome to Buildroot, type root or test to login
- buildroot login: [ 36.078817] wlan-en-regulator: disabling
- [ 64.750933] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -11
- [ 64.759833] wlcore: WARNING falling back to default config
- [ 64.891488] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 65.008995] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 65.115388] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 65.228067] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 65.491084] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
- [ 65.502947] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
- [ 65.511646] wlcore: WARNING This default nvs file can be removed from the file system
- [ 65.520157] wlcore: loaded
- buildroot login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement