Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ## Booting image at 9f940000 ...
- Image Name: MIPS OpenWrt Linux-5.10.146
- Created: 2022-10-14 22:44:41 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 2234083 Bytes = 2.1 MB
- Load Address: 80060000
- Entry Point: 80060000
- Verifying Checksum at 0x9f940040 ...OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Linux version 5.10.146 (stereo@oberon) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Fri Oct 14 22:44:41 2022
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] MIPS: machine is Fortinet FAP221B
- [ 0.000000] SoC: Atheros AR9344 rev 2
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
- [ 0.000000] Kernel command line: console=ttyS0,9600n8 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 56188K/65536K available (5462K kernel code, 602K rwdata, 1196K rodata, 1180K init, 200K bss, 9348K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 51
- [ 0.000000] CPU clock: 560.000 MHz
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
- [ 0.000009] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
- [ 0.092488] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
- [ 0.237110] pid_max: default: 32768 minimum: 301
- [ 0.292344] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.379482] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.474041] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.568393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.685676] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.766736] pinctrl core: initialized pinctrl subsystem
- [ 0.830594] NET: Registered protocol family 16
- [ 0.944689] clocksource: Switched to clocksource MIPS
- [ 1.006065] NET: Registered protocol family 2
- [ 1.058273] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 1.145166] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 1.244895] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 1.336266] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 1.420330] TCP: Hash tables configured (established 1024 bind 1024)
- [ 1.496251] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 1.574127] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 1.657447] NET: Registered protocol family 1
- [ 1.709446] PCI: CLS 0 bytes, default 32
- [ 1.762552] workingset: timestamp_bits=14 max_order=14 bucket_order=0
- [ 1.844013] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.913554] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.034060] pinctrl-single 1804002c.pinmux: 544 pins, size 68
- [ 2.103529] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 2.180038] printk: console [ttyS0] disabled
- [ 2.231010] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
- [ 2.333793] printk: console [ttyS0] enabled
- [ 2.333793] printk: console [ttyS0] enabled
- [ 2.433993] printk: bootconsole [early0] disabled
- [ 2.433993] printk: bootconsole [early0] disabled
- [ 2.557840] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
- [ 2.619569] 4 fixed-partitions partitions found on MTD device spi0.0
- [ 2.695855] Creating 4 MTD partitions on "spi0.0":
- [ 2.753324] 0x000000000000-0x000000040000 : "u-boot"
- [ 2.816811] 0x000000040000-0x000000940000 : "rootfs"
- [ 2.877486] mtd: device 1 (rootfs) set to be root filesystem
- [ 2.946330] 1 squashfs-split partitions found on MTD device rootfs
- [ 3.020532] 0x000000350000-0x000000940000 : "rootfs_data"
- [ 3.087068] 0x000000940000-0x000000ff0000 : "kernel"
- [ 3.147696] 0x000000ff0000-0x000001000000 : "art"
- [ 3.214569] ag71xx 19000000.eth: invalid MAC address, using random address
- [ 3.715254] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd072, driver=Qualcomm Atheros AR8035]
- [ 3.835029] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
- [ 3.909418] i2c /dev entries driver
- [ 3.953718] NET: Registered protocol family 10
- [ 4.015121] Segment Routing with IPv6
- [ 4.059160] NET: Registered protocol family 17
- [ 4.112502] 8021q: 802.1Q VLAN Support v1.8
- [ 4.163644] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
- [ 4.236809] MEM 0x0000000010000000..0x0000000013ffffff
- [ 4.299453] IO 0x0000000000000000..0x0000000000000000
- [ 4.362352] PCI host bridge to bus 0000:00
- [ 4.411513] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
- [ 4.494000] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 4.560870] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 4.642343] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 4.737435] pci 0000:00:00.0: [168c:0030] type 00 class 0x028000
- [ 4.809500] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
- [ 4.890982] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 4.971441] pci 0000:00:00.0: supports D1
- [ 5.019464] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 5.089628] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 5.169000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
- [ 5.256712] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
- [ 5.372565] jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- [ 5.555365] VFS: Mounted root (jffs2 filesystem) readonly on device 31:1.
- [ 5.641891] Freeing unused kernel memory: 1180K
- [ 5.696211] This architecture does not have kernel memory protection.
- [ 5.773498] Run /sbin/init as init process
- [ 5.822847] Run /etc/init as init process
- [ 5.871189] Run /bin/init as init process
- [ 5.919460] Run /bin/sh as init process
- [ 5.965661] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
- [ 6.135782] Rebooting in 1 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement