API tools faq
paste
SpaceInvaders

Untitled

SpaceInvaders
Jul 7th, 2023
38
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.98 KB | None | 0 0
raw download clone embed print report
  1. ~]# smartctl -a /dev/sdc
  2. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.8-200.fc38.x86_64] (local build)
  3. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Exos X16
  7. Device Model: ST16000NM001G-2KK103
  8. Serial Number: ZL22XY1D
  9. LU WWN Device Id: 5 000c50 0c4382a1a
  10. Firmware Version: SN04
  11. User Capacity: 16,000,900,661,248 bytes [16.0 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database 7.3/5417
  16. ATA Version is: ACS-4 (minor revision not indicated)
  17. SATA Version is: SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s)
  18. Local Time is: Fri Jul 7 18:31:57 2023 EDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART Status command failed: Connection timed out
  24. SMART overall-health self-assessment test result: PASSED
  25. Warning: This result is based on an Attribute check.
  26.  
  27. General SMART Values:
  28. Offline data collection status: (0x82) Offline data collection activity
  29. was completed without error.
  30. Auto Offline Data Collection: Enabled.
  31. Self-test execution status: ( 0) The previous self-test routine completed
  32. without error or no self-test has ever
  33. been run.
  34. Total time to complete Offline
  35. data collection: ( 567) seconds.
  36. Offline data collection
  37. capabilities: (0x7b) SMART execute Offline immediate.
  38. Auto Offline data collection on/off support.
  39. Suspend Offline collection upon new
  40. command.
  41. Offline surface scan supported.
  42. Self-test supported.
  43. Conveyance Self-test supported.
  44. Selective Self-test supported.
  45. SMART capabilities: (0x0003) Saves SMART data before entering
  46. power-saving mode.
  47. Supports SMART auto save timer.
  48. Error logging capability: (0x01) Error logging supported.
  49. General Purpose Logging supported.
  50. Short self-test routine
  51. recommended polling time: ( 1) minutes.
  52. Extended self-test routine
  53. recommended polling time: (1466) minutes.
  54. Conveyance self-test routine
  55. recommended polling time: ( 2) minutes.
  56. SCT capabilities: (0x70bd) SCT Status supported.
  57. SCT Error Recovery Control supported.
  58. SCT Feature Control supported.
  59. SCT Data Table supported.
  60.  
  61.  
  62. SMART Attributes Data Structure revision number: 10
  63. Vendor Specific SMART Attributes with Thresholds:
  64. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  65. 1 Raw_Read_Error_Rate 0x000f 071 064 044 Pre-fail Always - 134663752
  66. 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
  67. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2
  68. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  69. 7 Seek_Error_Rate 0x000f 062 060 045 Pre-fail Always - 1603459
  70. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 68
  71. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  72. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1
  73. 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
  74. 187 Reported_Uncorrect 0x0032 091 091 000 Old_age Always - 9
  75. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  76. 190 Airflow_Temperature_Cel 0x0022 064 049 040 Old_age Always - 36 (Min/Max 26/44)
  77. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0
  78. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 12
  79. 194 Temperature_Celsius 0x0022 036 044 000 Old_age Always - 36 (0 26 0 0 0)
  80. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 32
  81. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 32
  82. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  83. 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
  84. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 20h+17m+03.781s
  85. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 5509822400
  86. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 236662
  87.  
  88. SMART Error Log Version: 1
  89. ATA Error Count: 9 (device log contains only the most recent five errors)
  90. CR = Command Register [HEX]
  91. FR = Features Register [HEX]
  92. SC = Sector Count Register [HEX]
  93. SN = Sector Number Register [HEX]
  94. CL = Cylinder Low Register [HEX]
  95. CH = Cylinder High Register [HEX]
  96. DH = Device/Head Register [HEX]
  97. DC = Device Command Register [HEX]
  98. ER = Error register [HEX]
  99. ST = Status register [HEX]
  100. Powered_Up_Time is measured from power on, and printed as
  101. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  102. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  103.  
  104. Error 9 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
  105. When the command that caused the error occurred, the device was active or idle.
  106.  
  107. After command completion occurred, registers were:
  108. ER ST SC SN CL CH DH
  109. -- -- -- -- -- -- --
  110. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  111.  
  112. Commands leading to the command that caused the error were:
  113. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  114. -- -- -- -- -- -- -- -- ---------------- --------------------
  115. 25 00 08 ff ff ff ef 00 1d+13:42:13.753 READ DMA EXT
  116. 00 00 00 00 00 00 00 ff 1d+13:41:37.143 NOP [Abort queued commands]
  117. 25 00 08 ff ff ff ef 00 1d+13:41:34.492 READ DMA EXT
  118. 00 00 00 00 00 00 00 ff 1d+13:41:34.443 NOP [Abort queued commands]
  119. 25 00 08 ff ff ff ef 00 1d+13:41:31.767 READ DMA EXT
  120.  
  121. Error 8 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. 25 00 08 ff ff ff ef 00 1d+13:41:34.492 READ DMA EXT
  133. 00 00 00 00 00 00 00 ff 1d+13:41:34.443 NOP [Abort queued commands]
  134. 25 00 08 ff ff ff ef 00 1d+13:41:31.767 READ DMA EXT
  135. 00 00 00 00 00 00 00 ff 1d+13:40:55.110 NOP [Abort queued commands]
  136. 25 00 08 ff ff ff ef 00 1d+13:40:52.435 READ DMA EXT
  137.  
  138. Error 7 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
  139. When the command that caused the error occurred, the device was active or idle.
  140.  
  141. After command completion occurred, registers were:
  142. ER ST SC SN CL CH DH
  143. -- -- -- -- -- -- --
  144. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  145.  
  146. Commands leading to the command that caused the error were:
  147. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  148. -- -- -- -- -- -- -- -- ---------------- --------------------
  149. 25 00 08 ff ff ff ef 00 1d+13:41:31.767 READ DMA EXT
  150. 00 00 00 00 00 00 00 ff 1d+13:40:55.110 NOP [Abort queued commands]
  151. 25 00 08 ff ff ff ef 00 1d+13:40:52.435 READ DMA EXT
  152. 00 00 00 00 00 00 00 ff 1d+13:40:52.386 NOP [Abort queued commands]
  153. 25 00 08 ff ff ff ef 00 1d+13:40:49.781 READ DMA EXT
  154.  
  155. Error 6 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. 25 00 08 ff ff ff ef 00 1d+13:40:52.435 READ DMA EXT
  167. 00 00 00 00 00 00 00 ff 1d+13:40:52.386 NOP [Abort queued commands]
  168. 25 00 08 ff ff ff ef 00 1d+13:40:49.781 READ DMA EXT
  169. 00 00 00 00 00 00 00 ff 1d+13:40:13.186 NOP [Abort queued commands]
  170. 25 00 08 ff ff ff ef 00 1d+13:40:10.519 READ DMA EXT
  171.  
  172. Error 5 occurred at disk power-on lifetime: 37 hours (1 days + 13 hours)
  173. When the command that caused the error occurred, the device was active or idle.
  174.  
  175. After command completion occurred, registers were:
  176. ER ST SC SN CL CH DH
  177. -- -- -- -- -- -- --
  178. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  179.  
  180. Commands leading to the command that caused the error were:
  181. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  182. -- -- -- -- -- -- -- -- ---------------- --------------------
  183. 25 00 08 ff ff ff ef 00 1d+13:40:49.781 READ DMA EXT
  184. 00 00 00 00 00 00 00 ff 1d+13:40:13.186 NOP [Abort queued commands]
  185. 25 00 08 ff ff ff ef 00 1d+13:40:10.519 READ DMA EXT
  186. 00 00 00 00 00 00 00 ff 1d+13:40:10.470 NOP [Abort queued commands]
  187. 25 00 08 ff ff ff ef 00 1d+13:40:07.795 READ DMA EXT
  188.  
  189. SMART Self-test log structure revision number 1
  190. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  191.  
  192. SMART Selective self-test log data structure revision number 1
  193. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  194. 1 0 0 Not_testing
  195. 2 0 0 Not_testing
  196. 3 0 0 Not_testing
  197. 4 0 0 Not_testing
  198. 5 0 0 Not_testing
  199. Selective self-test flags (0x0):
  200. After scanning selected spans, do NOT read-scan remainder of disk.
  201. If Selective self-test is pending on power-up, resume after 0 minute delay.
  202.  
  203. ~]# smartctl -l selftest /dev/sdc
  204. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.8-200.fc38.x86_64] (local build)
  205. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  206.  
  207. === START OF READ SMART DATA SECTION ===
  208. SMART Self-test log structure revision number 1
  209. No self-tests have been logged. [To run self-tests, use: smartctl -t]
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!