API tools faq
paste
rayddteam

virt2real bootlog

rayddteam
Jan 9th, 2014
121
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.39 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2010.12-rc2-00000-gb9beeb1-dirty (Oct 21 2013 - 08:10:37)
  2.  
  3. Cores: ARM 297 MHz
  4. DDR: 243 MHz
  5. I2C: ready
  6. DRAM: 128 MiB
  7. NAND: 256 MiB
  8. MMC: davinci: 0, davinci: 1
  9. *** Warning - bad CRC, using default environment
  10.  
  11. Net: Ethernet PHY: GENERIC @ 0x00
  12. reading uEnv.txt
  13.  
  14. 540 bytes read
  15. Importing environment from mmc ...
  16. Running uenvcmd ...
  17. reading uImage
  18.  
  19. 3024712 bytes read
  20. ## Booting kernel from Legacy Image at 82000000 ...
  21. Image Name: Linux-3.9.0-rc6-virt2real+
  22. Created: 2013-10-28 1:04:42 UTC
  23. Image Type: ARM Linux Kernel Image (uncompressed)
  24. Data Size: 3024648 Bytes = 2.9 MiB
  25. Load Address: 80008000
  26. Entry Point: 80008000
  27. Verifying Checksum ... OK
  28. Loading Kernel Image ... OK
  29. OK
  30.  
  31. Starting kernel ...
  32.  
  33. Uncompressing Linux... done, booting the kernel.
  34. Booting Linux on physical CPU 0x0
  35. Linux version 3.9.0-rc6-virt2real+ (root@virt2real) (gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) ) #30 PREEMPT Sun Oct 27 21:04:40 EDT 2013
  36. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  37. CPU: VIVT data cache, VIVT instruction cache
  38. Machine: DaVinci DM365 EVM
  39. Memory policy: ECC disabled, Data cache writeback
  40. DaVinci dm36x_rev1.2 variant 0x8
  41. *** VOICECODEC CONFIGURATION is 16 kHz
  42. *** Board Clocks:
  43. * PERI_CLKCTL=0x243F027C
  44. * CLOCKOUT0EN is 0 = en
  45. * CLOCKOUT1EN is 0 = en
  46. * CLOCKOUT2EN is 1 = dis
  47. * DIV1 is 15 = 16
  48. * DIV2 is 4 = 5
  49. * DIV3 is 63 = 64
  50. * HDVICPCLKS is 1 = PLLC2SYSCLK2
  51. * DDRCLKS is 0 = PLLC1SYSCLK7
  52. * KEYSCLKS is 0 = RTCXI (MXI)
  53. * ARMCLKS is 1 = PLLC2SYSCLK2
  54. * PRTCCLKS is 0 = RTCXI (OSC)
  55. * CLKIN = 24000000 Hz
  56. * PLL1PreDiv is 7 = 8
  57. * PLL1Mul is 81 = 162
  58. * PLL1PostDiv is 0 = 1 -- en
  59. * PLL1 CLK = 486000000 Hz -- en
  60. * PLL1DIV1 is 19 = 20 -- en
  61. * PLL1DIV2 is 1 = 2 -- en
  62. * PLL1DIV3 is 1 = 2 -- en
  63. * PLL1DIV4 is 3 = 4 -- en
  64. * PLL1DIV5 is 1 = 2 -- en
  65. * PLL1DIV6 is 17 = 18 -- en
  66. * PLL1DIV7 is 0 = 1 -- en
  67. * PLL1DIV8 is 4 = 5 -- en
  68. * PLL1DIV9 is 1 = 2 -- en
  69. * PLL2PreDiv is 7 = 8
  70. * PLL2Mul is 99 = 198
  71. * PLL2PostDiv is 0 = 1 -- en
  72. * PLL2 CLK = 594000000 Hz -- en
  73. * PLL2DIV1 is 24 = 25 -- en
  74. * PLL2DIV2 is 1 = 2 -- en
  75. * PLL2DIV3 is 1 = 2 -- en
  76. * PLL2DIV4 is 28 = 29 -- en
  77. * PLL2DIV5 is 7 = 8 -- en
  78. * ARM CORE CLK = 297000000 Hz
  79. * HDVICP CLK = 297000000 Hz
  80. * DDR CLK supply for PHY = 486000000 Hz ; Real DDR clk = 243000000 Hz
  81. * VoiceCodec CLK = 4096551 Hz ; Sample Freq = 16002 Hz
  82. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 25146
  83. Kernel command line: davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=PAL davinci_display.cont2_bufsize=3145728 vpfe_capture.cont_bufoffset=3145728 vpfe_capture.cont_bufsize=6291456 video=davincifb:osd1=0x0x8:osd0=720x480x16,1350K@0,0 console=ttyS0,115200n8 dm365_imp.oper_mode=0 vpfe_capture.interface=1 mem=99M root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 pwrled=on redled=none greenled=cpu0 wifi=on lan0=on 1wire=26 1wirepullup=27 spi0=on ap=on camera=ov2643
  84. PID hash table entries: 512 (order: -1, 2048 bytes)
  85. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  86. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  87. __ex_table already sorted, skipping sort
  88. Memory: 99MB = 99MB total
  89. Memory: 94348k/94348k available, 7028k reserved, 0K highmem
  90. Virtual kernel memory layout:
  91. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  92. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  93. vmalloc : 0x86800000 - 0xff000000 (1928 MB)
  94. lowmem : 0x80000000 - 0x86300000 ( 99 MB)
  95. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  96. .text : 0x80008000 - 0x805591ac (5445 kB)
  97. .init : 0x8055a000 - 0x8058366c ( 166 kB)
  98. .data : 0x80584000 - 0x805ce770 ( 298 kB)
  99. .bss : 0x805ce770 - 0x805f11dc ( 139 kB)
  100. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  101. Preemptible hierarchical RCU implementation.
  102. NR_IRQS:245
  103. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  104. Console: colour dummy device 80x30
  105. Calibrating delay loop... 147.86 BogoMIPS (lpj=739328)
  106. pid_max: default: 32768 minimum: 301
  107. Mount-cache hash table entries: 512
  108. CPU: Testing write buffer coherency: ok
  109. Setting up static identity map for 0x80465fa0 - 0x80465fdc
  110. devtmpfs: initialized
  111. DaVinci: 8 gpio irqs
  112. NET: Registered protocol family 16
  113. DMA: preallocated 256 KiB pool for atomic coherent allocations
  114. Parse kernel cmdline:
  115. Power LED set ON
  116. Wi-Fi board enabled
  117. LAN enabled
  118. Use 1-wire on GPIO26
  119. Use 1-wire pullup resistor on GPIO27
  120. SPI0 enabled
  121. Use camera OmniVision OV2643
  122. LED triggers init success
  123. w1-gpio conected to GPIO22
  124. bio: create slab <bio-0> at 0
  125. edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  126. DM365 IPIPE initialized in Continuous mode
  127. SCSI subsystem initialized
  128. usbcore: registered new interface driver usbfs
  129. usbcore: registered new interface driver hub
  130. usbcore: registered new device driver usb
  131. i2c_davinci i2c_davinci.1: Runtime PM disabled, clock forced on.
  132. vpss vpss: dm365_vpss vpss probed
  133. vpss vpss: dm365_vpss vpss probe success
  134. dm365_afew_hw_init
  135. ch0 default output "COMPOSITE", mode "PAL"
  136. ch1 default output "", mode ""
  137. usbcore: registered new interface driver usb-storage
  138. USB Mass Storage support registered.
  139. usbcore: registered new interface driver ums-alauda
  140. usbcore: registered new interface driver ums-cypress
  141. usbcore: registered new interface driver ums-datafab
  142. usbcore: registered new interface driver ums_eneub6250
  143. usbcore: registered new interface driver ums-freecom
  144. usbcore: registered new interface driver ums-isd200
  145. usbcore: registered new interface driver ums-jumpshot
  146. usbcore: registered new interface driver ums-karma
  147. usbcore: registered new interface driver ums-onetouch
  148. usbcore: registered new interface driver ums-realtek
  149. usbcore: registered new interface driver ums-sddr09
  150. usbcore: registered new interface driver ums-sddr55
  151. usbcore: registered new interface driver ums-usbat
  152. usbcore: registered new interface driver usbserial
  153. usbcore: registered new interface driver usbserial_generic
  154. usbserial: USB Serial support registered for generic
  155. usbcore: registered new interface driver cp210x
  156. usbserial: USB Serial support registered for cp210x
  157. usbcore: registered new interface driver digi_acceleport
  158. usbserial: USB Serial support registered for Digi 2 port USB adapter
  159. usbserial: USB Serial support registered for Digi 4 port USB adapter
  160. usbcore: registered new interface driver ftdi_sio
  161. usbserial: USB Serial support registered for FTDI USB Serial Device
  162. usbcore: registered new interface driver option
  163. usbserial: USB Serial support registered for GSM modem (1-port)
  164. usbcore: registered new interface driver pl2303
  165. usbserial: USB Serial support registered for pl2303
  166. rtc_davinci rtc_davinci.0: rtc core: registered rtc_davinci as rtc0
  167. Setting 32 kHz output in RTC driver: start 0, fec69000
  168. Setting 32 kHz output in RTC driver: finish 1
  169. i2c /dev entries driver
  170. Linux video capture interface: v2.00
  171. lirc_dev: IR Remote Control driver registered, major 250
  172. IR NEC protocol handler initialized
  173. IR RC5(x) protocol handler initialized
  174. IR RC6 protocol handler initialized
  175. IR JVC protocol handler initialized
  176. IR Sony protocol handler initialized
  177. IR RC5 (streamzap) protocol handler initialized
  178. IR SANYO protocol handler initialized
  179. IR MCE Keyboard/mouse protocol handler initialized
  180. IR LIRC bridge handler initialized
  181. vpfe_init
  182. vpfe-capture: vpss clock vpss_master enabled
  183. vpfe-capture vpfe-capture: v4l2 device registered
  184. vpfe-capture vpfe-capture: video device registered
  185. ov2643 1-0030: model id detected 0x2643
  186. ov2643 1-0030: ov2643 1-0030 decoder driver registered !!
  187. vpfe-capture vpfe-capture: v4l2 sub device ov2643 registered
  188. PROBE CCDC
  189. vpfe_register_ccdc_device: DM365 ISIF
  190. No entry for the specified index 201
  191. No entry for the specified index 202
  192. CCDC_CONFIGURE BEFORE
  193. DM365 ISIF is registered with vpfe.
  194. af major#: 249, minor# 0
  195. AF Driver initialized
  196. aew major#: 248, minor# 0
  197. AEW Driver initialized
  198. Trying to register davinci display video device.
  199. layer=856dfc00,layer->video_dev=856dfd64
  200. Trying to register davinci display video device.
  201. layer=855ec000,layer->video_dev=855ec164
  202. davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
  203. watchdog watchdog: Runtime PM disabled, clock forced on.
  204. watchdog watchdog: heartbeat 60 sec
  205. usbcore: registered new interface driver bcm203x
  206. usbcore: registered new interface driver bpa10x
  207. usbcore: registered new interface driver bfusb
  208. usbcore: registered new interface driver btusb
  209. sdhci: Secure Digital Host Controller Interface driver
  210. sdhci: Copyright(c) Pierre Ossman
  211. davinci_mmc dm365-mmc.1: Runtime PM disabled, clock forced on.
  212. edma-dma-engine edma-dma-engine.0: allocated channel for 0:31
  213. edma-dma-engine edma-dma-engine.0: allocated channel for 0:30
  214. davinci_mmc dm365-mmc.1: Using DMA, 4-bit mode
  215. davinci_mmc dm365-mmc.0: Runtime PM disabled, clock forced on.
  216. edma-dma-engine edma-dma-engine.0: allocated channel for 0:27
  217. edma-dma-engine edma-dma-engine.0: allocated channel for 0:26
  218. mmc0: new SDIO card at address 0001
  219. davinci_mmc dm365-mmc.0: Using DMA, 4-bit mode
  220. ledtrig-cpu: registered to indicate activity on CPUs
  221. usbcore: registered new interface driver usbhid
  222. usbhid: USB HID core driver
  223. v2r_pins module version 1.3 init
  224. v2r_pins device major: 247
  225. v2r_pins construct device:0
  226. v2r_pins device is created successfully
  227. init v2r GPIO & PWM functions
  228. v2r_gpio module version 1.3 init
  229. v2r_gpio device major: 246
  230. v2r_gpio construct device:0
  231. mmc1: new high speed SDHC card at address 59b4
  232. v2r_gpio device is created successfully
  233. mmcblk0: mmc1:59b4 USD 14.7 GiB
  234. TI Davinci ADC v1.0
  235. mmcblk0: p1 p2
  236. v2rswpwm module init
  237. v2rswpwm device major: 245
  238. v2rswpwm construct device:0
  239. v2rswpwm device is constructed successfully
  240. soc-audio soc-audio.0: ASoC: machine DaVinci DM365 EVM should use snd_soc_register_card()
  241. soc-audio soc-audio.0: cq93vc-hifi <-> davinci-vcif mapping ok
  242. TCP: westwood registered
  243. TCP: highspeed registered
  244. TCP: htcp registered
  245. NET: Registered protocol family 17
  246. Bridge firewalling registered
  247. Bluetooth: RFCOMM TTY layer initialized
  248. Bluetooth: RFCOMM socket layer initialized
  249. Bluetooth: RFCOMM ver 1.11
  250. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  251. Bluetooth: BNEP filters: protocol multicast
  252. Bluetooth: BNEP socket layer initialized
  253. Bluetooth: HIDP socket layer initialized
  254. 8021q: 802.1Q VLAN Support v1.8
  255. console [netcon0] enabled
  256. netconsole: network logging started
  257. rtc_davinci rtc_davinci.0: setting system clock to 2000-01-01 00:00:04 UTC (946684804)
  258. ALSA device list:
  259. #0: DaVinci DM365 EVM
  260. Waiting 2sec before mounting root device...
  261. kjournald starting. Commit interval 5 seconds
  262. EXT3-fs (mmcblk0p2): using internal journal
  263. EXT3-fs (mmcblk0p2): recovery complete
  264. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  265. VFS: Mounted root (ext3 filesystem) on device 179:2.
  266. devtmpfs: mounted
  267. Freeing init memory: 164K
  268. INIT: version 2.88 booting
  269. Starting system message bus: done
  270. Loading coprocessors modules...
  271. Loading cmem from 0x86c00000 to 0x87b00000
  272. CMEMK module: built on Oct 21 2013 at 08:10:33
  273. Reference Linux version 3.9.0
  274. File /opt/SDK/dvsdk/linuxutils_2_26_03_06/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
  275. allocated heap buffer 0x88000000 of size 0xf00000
  276. heap fallback enabled - will try heap if pool buffer is not available
  277. CMEM Range Overlaps Kernel Physical - allowing overlap
  278. CMEM phys_start (0x1000) overlaps kernel (0x80000000 -> 0x86300000)
  279. cmemk initialized
  280. EDMAK module: built on Oct 21 2013 at 08:10:34
  281. Reference Linux version 3.9.0
  282. File /opt/SDK/dvsdk/linuxutils_2_26_03_06/packages/ti/sdo/linuxutils/edma/src/module/edmak.c
  283. IRQK module: built on Oct 21 2013 at 08:10:35
  284. Reference Linux version 3.9.0
  285. File /opt/SDK/dvsdk/linuxutils_2_26_03_06/packages/ti/sdo/linuxutils/irq/src/module/irqk.c
  286. irqk initialized
  287. Wi-Fi onboard module enabled
  288. Starting acces point...
  289. uap_probe: vendor=0x02DF device=0x9103 class=7 function=1
  290. ^[[15~UAP FW is active
  291. Starting network...
  292. SSID setting successful
  293. protocol setting successful
  294. WPA passphrase setting successful
  295. cipher setting successful
  296. Channel setting successful
  297. BSS started!
  298. ip: can't find device 'wlan0'
  299. ip: SIOCGIFFLAGS: No such device
  300. ip: can't find device 'wlan0'
  301. ip: can't find device 'usb0'
  302. ip: SIOCGIFFLAGS: No such device
  303. Getting initial time via ntp.
  304. Starting network time protocol daemon: ntpd.
  305. Starting dropbear sshd: OK
  306. Starting lighttpd: OK
  307. Starting ProFTPD: done
  308. Starting crtmpserver: OK
  309. Starting DHCP server: Internet Systems Consortium DHCP Server 4.1-ESV-R8
  310. Copyright 2004-2013 Internet Systems Consortium.
  311. All rights reserved.
  312. For info, please visit https://www.isc.org/software/dhcp/
  313. Wrote 2 leases to leases file.
  314. Listening on LPF/uap0/00:24:7e:b7:4e:ca/192.168.2.0/24
  315. Sending on LPF/uap0/00:24:7e:b7:4e:ca/192.168.2.0/24
  316. Sending on Socket/fallback/fallback-net
  317. .
  318. musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  319. ifconfig: wlan0: error fetching interface information: Device not found
  320. gadget: using random self ethernet address
  321. gadget: using random host ethernet address
  322. usb0: MAC 3e:71:97:68:59:08
  323. usb0: HOST MAC de:04:c0:4f:6f:52
  324. gadget: Ethernet Gadget, version: Memorial Day 2008
  325. gadget: g_ether ready
  326. musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  327. musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
  328. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  329. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  330. usb usb1: Product: MUSB HDRC host driver
  331. usb usb1: Manufacturer: Linux 3.9.0-rc6-virt2real+ musb-hcd
  332. usb usb1: SerialNumber: musb-hdrc.0.auto
  333. hub 1-0:1.0: USB hub found
  334. hub 1-0:1.0: 1 port detected
  335. Simple mixer control 'Mono DAC',0
  336. Capabilities: pvolume pvolume-joined
  337. Playback channels: Mono
  338. Limits: Playback 0 - 63
  339. Mono: Playback 63 [100%]
  340. INIT: Entering runlevel: 1
  341.  
  342. Welcome to Virt2real!
  343. virt2real login: root
  344. Password:
  345. Welcome to virt2real!
  346. http://virt2real.ru
  347.  
  348. .__ __ ________ .__
  349. ___ __|__|_______ _/ |_\_____ \_______ ____ _____ | |
  350. \ \/ /| |\_ __ \\ __\/ ____/\_ __ \_/ __ \ \__ \ | |
  351. \ / | | | | \/ | | / \ | | \/\ ___/ / __ \_| |__
  352. \_/ |__| |__| |__| \_______ \|__| \___ >(____ /|____/
  353. \/ \/ \/
  354.  
  355. login[1438]: root login on 'ttyS0'
  356. [root@virt2real ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!