BeBox Bootloader & BeOS R5 Kernel serial output

installing 00353fb8
 -> disk/scsi/rescan
installing 003540c0
 -> disk/scsi/040/raw
installing 00354058
 -> disk/scsi/030/raw
installing 00353b40
IDE: ctrl 1 is done with its initialization, took 20 us.
IDE: ctrl 0 is done with its initialization, took 29649 us.
 -> disk/ide/rescan
installing 00353224
 -> disk/floppy/raw

Be Boot ROM, built Jun 27 1997 19:00:30
Rev 8 motherboard, Rev 5 i/o card
Copyright (C) 1991-97 Be Incorporated.  All Rights Reserved
Configured boot device is '/dev/disk/scsi/040/raw', session 0, partition 0
Max log buffer == 128k
bfs mounted on fd 3, bfs_info @ 0x7465c00
loading /scsi_040_0_0/beos/system/kernel_joe (/scsi_040_0_0)
loading section 0 at (phys. = 00003100, virt. = 00003100)
loading section 1 at (phys. = 00081000, virt. = 00081000)
loading section 2 at (phys. = 000c9000, virt. = 000c9000)
loader section, size 0000227c (000c9090 - 000cb30c)
0 dependencies
this looks like a dr9 (aka Preview) or newer kernel
loading /scsi_040_0_0/beos/system/add-ons/kernel/file_systems/bfs (/scsi_040_0_0)
loading section 0 at (phys. = 000cc000, virt. = 000cc000)
loading section 1 at (phys. = 000f3000, virt. = 000f3000)
loading section 2 at (phys. = 000fa000, virt. = 000fa000)
loader section, size 00000588 (000fa090 - 000fa618)
1 dependencies
loading /scsi_040_0_0/beos/system/kernel_joe (/scsi_040_0_0)
already loaded
START(000567ac, 00089000)
adding kinfo = 000c9000, fsinfo = 000fa000
brkval = 000fb000
loading /scsi_040_0_0/beos/system/kernel_joe (/scsi_040_0_0)
loading section 0 at (phys. = 00003100, virt. = 00003100)
loading section 1 at (phys. = 00081000, virt. = 00081000)
loading section 2 at (phys. = 000c9000, virt. = 000c9000)
loader section, size 0000227c (000c9090 - 000cb30c)
0 dependencies
this looks like a dr9 (aka Preview) or newer kernel
loading /scsi_040_0_0/beos/system/add-ons/kernel/file_systems/bfs (/scsi_040_0_0)
loading section 0 at (phys. = 000cc000, virt. = 000cc000)
loading section 1 at (phys. = 000f3000, virt. = 000f3000)
loading section 2 at (phys. = 000fa000, virt. = 000fa000)
loader section, size 00000588 (000fa090 - 000fa618)
1 dependencies
loading /scsi_040_0_0/beos/system/kernel_joe (/scsi_040_0_0)
already loaded
START(000567ac, 00089000)
adding kinfo = 000c9000, fsinfo = 000fa000
brkval = 000fb000
Booting from device: /dev/disk/scsi/040/0_0

Be PowerPC Kernel version of May 26 2000 time 15:12:42
(C) Copyright 1991-97 Be, Inc.  All Rights Reserved.
Processor: PowerPC 603e, revision 0x0400, at 132MHz, on 33MHz bus
BIPROCESSOR mode
0e800000 bytes of RAM (232 MBytes)
Be motherboard version 8
Be io card version 5
dma coherent with respect to CPU cache
NTHREADS = 4096, NTEAMS = 1024, NSEMS = 16384
NAREAS = 8192
NPORTS = 4096, MAXMSGS = 8192, MAXBUFS = 8192
hack_load_cont(000c9000, /boot/beos/system/kernel_joe)
3 sections
hack_load_cont(000fa000, /boot/beos/system/add-ons/kernel/file_systems/bfs)
3 sections
hack_load_cont(000c9000, _KERNEL_)
addr = 00003000, size = 0007e000, name = kernel_joe_text
addr = 00081000, size = 00048000, name = kernel_joe_data
addr = 000c9000, size = 00003000, name = kernel_joe_reloc
addr = 000cc000, size = 00027000, name = bfs_text
addr = 000f3000, size = 00007000, name = bfs_data
addr = 000fa000, size = 00001000, name = bfs_reloc
kheap: addr 000fb000, size 00012000
vheap: addr 05c50000, size 003a0000
BAT: map (0) 10000000, 10000000 (physical_ram) 3
flo_init: COOL! cyl buf crosses 64k boundary! tell bob
flo_init: cyl_map[0].address = 0x0010d000 size = 00003000
flo_init: cyl_map[1].address = 0x00110000 size = 00001800
flo_init: cyl_map[2].address = 0x00000000 size = 00000000
floppy uninit()
IDE -- try_module: busses/ide/genericpci/v0.6 has no busses
IDE -- send_ata: drive select failed no device
IDE -- send_ata: drive select failed no device
IDE -- try_module: busses/ide/genericpci/v0.6 has no busses
IDE -- send_ata: drive select failed no device
IDE -- send_ata: drive select failed no device
scsi_cam: ccb_pool_size = 32
scsi_cam: path=0, devcount=8
scsi_cam: module 'busses/scsi/53c810/v1' loaded
scsi_cam: module 'busses/scsi/53c810/v1' initialized
scsi_cam: path 0 slack...
scsi_cam: path 0 slack...
vga_init_driver()
boot_frame_buffer = 0
vga_uninit_driver()
mapping /dev/disk/scsi/040/raw to /dev/disk/scsi/0/4/0/raw. long live the new scsi names
Max log buffer == 128k
Checking block bitmap...
Done checking bitmap.
bfs @ 0x2369c0 (SCSI2SD V6) on /dev/disk/scsi/0/4/0/0_0
swap size: 313MB
setting vnid 0x100004 (bi@ 0x4facf8) to be UN-CACHED
Starting  /boot/beos/bin/sh /boot/beos/system/boot/Bootscript
clockconfig: Setting timezone to '/boot/beos/etc/timezones/North_and_Central_America/Menlo_Park__Calif'
clockconfig: RTC stores GMT time.
BAT: map (1) 20800000,   800000 (102B_051A_000D00 framebuffer) 5
BAT: (1) loc u,l = 208000ff,d000002a
BAT: rem u,l = 208000ff,d000002a
No changes in dir : /boot/beos/etc/fonts/ttfonts
No changes in dir : /boot/beos/etc/fonts/ttfonts
opening match file for /boot/beos/system/lib/libbe.so
  _ReservedDragger1__8BDraggerFv patched to DragBitmap__8BDraggerFP6BPointP12drawing_mode
  _ReservedSlider1__7BSliderFv patched to SetOrientation__7BSliderF11orientation
  _ReservedSlider2__7BSliderFv patched to SetBarThickness__7BSliderFf
  _ReservedSlider3__7BSliderFv patched to SetFont__7BSliderFPC5BFontUl
  _ReservedHandler1__8BHandlerFv patched to SendNotices__8BHandlerFUlPC8BMessage
5 pair(s) found
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
input_server: clone_area() error!
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
input_server: load_add_on(screen_saver) success
input_server: instantiating filter screen_saver
input_server: get_image_symbol(screen_saver.xMAP) of instantiate_input_filter failed!
input_server: unload_add_on(screen_saver.xMAP)
input_server: load_add_on(screen_saver.xMAP) failed
input_server: load_add_on(keyboard) success
input_server: instantiating device keyboard
input_server: StartMonitoringDevice input/keyboard/usb
++++++++ init_driver kb_mouse built May 26 2000 14:05:25
kb_mouse: wait_status (01, 01) timed out after 10 ms
got 0x55 after 0 retries
got a 0 after 0 retries
Found a keyboard!
Enabling aux interface worked!
flushed be
flushed 0f
flushed c0
kb_mouse: wait_status (01, 01) timed out after 10 ms
Found a PS2 mouse!
kb_mouse: wait_status (01, 01) timed out after 10 ms
kbmouse init_driver: success!
uninit_driver kb_mouse
input_server: watch_node -> B_WATCH_DIRECTORY
++++++++ init_driver kb_mouse built May 26 2000 14:05:25
kb_mouse: wait_status (01, 01) timed out after 10 ms
got 0x55 after 0 retries
got a 0 after 0 retries
Found a keyboard!
Enabling aux interface worked!
kb_mouse: wait_status (01, 01) timed out after 10 ms
Found a PS2 mouse!
kb_mouse: wait_status (01, 01) timed out after 10 ms
kbmouse init_driver: success!
kbmouse open 'input/keyboard/at/0'
opening AT keyboard
!!no scancode file - use built in table
input_server: registering device AT Keyboard 1 80018728 from keyboard
input_server: get_image_symbol(keyboard.xMAP) of instantiate_input_device failed!
input_server: unload_add_on(keyboard.xMAP)
input_server: load_add_on(keyboard.xMAP) failed
input_server: load_add_on(mouse) success
input_server: instantiating device mouse
input_server: StartMonitoringDevice input/mouse/usb
input_server: watch_node -> B_WATCH_DIRECTORY
kbmouse open 'input/mouse/ps2/0'
SUccessfully enabled PS2 mouse
kbmouse open 'input/mouse/serial/0'
input_server: registering device PS/2 Mouse 0 80018a78 from mouse
input_server: get_image_symbol(mouse.xMAP) of instantiate_input_device failed!
input_server: unload_add_on(mouse.xMAP)
input_server: load_add_on(mouse.xMAP) failed
input_server: load_add_on(serial_mouse) success
input_server: instantiating device serial_mouse
scc8530: init_driverNo scc8530.  Sorry, rico
input_server: get_image_symbol(serial_mouse.xMAP) of instantiate_input_device failed!
input_server: unload_add_on(serial_mouse.xMAP)
input_server: load_add_on(serial_mouse.xMAP) failed
input_server: starting device PS/2 Mouse (0) in mouse
input_server: starting device AT Keyboard (1) in keyboard
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
flo_init: COOL! cyl buf crosses 64k boundary! tell bob
flo_init: cyl_map[0].address = 0x0010d000 size = 00003000
opening match file for /boot/beos/system/lib/libtracker.so
flo_init: cyl_map[1].address = 0x00110000 size = 00001800
  __vt__11AboutWindow patched to __vt__Q28BPrivate11AboutWindow
flo_init: cyl_map[2].address = 0x00000000 size = 00000000
1 pair(s) found
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_before not found in /boot/beos/system/lib/libtracker.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libtracker.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
Instantiate__16DeskbarReplicantFP8BMessage not found in /boot/beos/system/lib/libbe.so
looking up match table...
Instantiate__16DeskbarReplicantFP8BMessage not found in /boot/beos/system/lib/libtracker.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
etherpci: init_driver init_driver: etherpci not found
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
TLan:  init_driver()
TLan: TLan not found
initialize_before not found in /boot/beos/system/lib/libtracker.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libtracker.so
looking up match table...
tulip: init_driver tulip Dec21041 found at IRQ 17 tulip: publish_devices()
tulip: init_driver tulip Dec21041 found at IRQ 17 Dec21041 found: irq 23 ioaddr 213a5100 ethernet address 00:e0:29:0e:47:54
initialize_before not found in /boot/beos/system/lib/libtracker.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libtracker.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
tulip: init_driver tulip Dec21041 found at IRQ 17 Dec21041 found: irq 23 ioaddr 213a2100 ethernet address 00:e0:29:0e:47:54
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libtracker.so
looking up match table...
terminate_after not found in /boot/beos/system/lib/libtracker.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
terminate_before not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
initialize_after not found in /boot/beos/system/lib/libbe.so
looking up match table...
tulip: init_driver tulip Dec21041 found at IRQ 17 Dec21041 found: irq 23 ioaddr 213a2100 ethernet address 00:e0:29:0e:47:54