Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-1-pve] (local build)
- Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Ultrastar DC HC530
- Device Model: WDC WUH721414ALE604
- Serial Number: 9JGHTE2T
- LU WWN Device Id: 5 000cca 258c72d3e
- Firmware Version: LDGSW2L0
- User Capacity: 14,000,519,643,136 bytes [14.0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5319
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Sep 2 12:05:56 2024 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1498) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96
- 3 Spin_Up_Time 0x0007 083 083 001 Pre-fail Always - 337 (Average 360)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 28
- 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
- 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 39671
- 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
- 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1633
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1633
- 194 Temperature_Celsius 0x0002 051 051 000 Old_age Always - 42 (Min/Max 21/46)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 10
- SMART Error Log Version: 1
- ATA Error Count: 10 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 10 occurred at disk power-on lifetime: 1154 hours (48 days + 2 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 00 00 63 91 40 00 9d+16:29:14.406 WRITE FPDMA QUEUED
- 61 80 08 00 62 91 40 00 9d+16:29:14.400 WRITE FPDMA QUEUED
- 61 80 00 80 62 91 40 00 9d+16:29:14.400 WRITE FPDMA QUEUED
- 61 80 08 80 61 91 40 00 9d+16:29:14.399 WRITE FPDMA QUEUED
- 61 80 08 00 61 91 40 00 9d+16:29:14.397 WRITE FPDMA QUEUED
- Error 9 occurred at disk power-on lifetime: 1152 hours (48 days + 0 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 08 00 e6 9b 40 00 9d+15:02:16.023 WRITE FPDMA QUEUED
- 61 80 10 80 e6 9b 40 00 9d+15:02:16.022 WRITE FPDMA QUEUED
- 61 80 00 80 e5 9b 40 00 9d+15:02:16.022 WRITE FPDMA QUEUED
- 61 80 08 00 e5 9b 40 00 9d+15:02:16.021 WRITE FPDMA QUEUED
- 61 80 00 80 f0 9b 40 00 9d+15:02:16.021 WRITE FPDMA QUEUED
- Error 8 occurred at disk power-on lifetime: 1147 hours (47 days + 19 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 08 00 c3 b9 40 00 9d+09:43:05.214 WRITE FPDMA QUEUED
- 61 80 20 00 c2 b9 40 00 9d+09:43:05.213 WRITE FPDMA QUEUED
- 61 80 18 00 c4 b9 40 00 9d+09:43:05.213 WRITE FPDMA QUEUED
- 61 80 10 80 c3 b9 40 00 9d+09:43:05.213 WRITE FPDMA QUEUED
- 61 80 00 80 c2 b9 40 00 9d+09:43:05.213 WRITE FPDMA QUEUED
- Error 7 occurred at disk power-on lifetime: 1143 hours (47 days + 15 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 28 80 67 af 40 00 9d+06:18:31.899 WRITE FPDMA QUEUED
- 61 80 f8 80 74 af 40 00 9d+06:18:31.885 WRITE FPDMA QUEUED
- 61 80 f0 00 74 af 40 00 9d+06:18:31.884 WRITE FPDMA QUEUED
- 61 80 e8 80 73 af 40 00 9d+06:18:31.884 WRITE FPDMA QUEUED
- 61 80 e0 00 73 af 40 00 9d+06:18:31.882 WRITE FPDMA QUEUED
- Error 6 occurred at disk power-on lifetime: 1142 hours (47 days + 14 hours)
- When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 00 80 a8 df 40 00 9d+04:47:41.678 WRITE FPDMA QUEUED
- 61 80 00 00 b5 df 40 00 9d+04:47:41.677 WRITE FPDMA QUEUED
- 61 80 08 00 a8 df 40 00 9d+04:47:41.676 WRITE FPDMA QUEUED
- 61 80 00 80 9c df 40 00 9d+04:47:41.676 WRITE FPDMA QUEUED
- 61 80 10 80 a7 df 40 00 9d+04:47:41.674 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 39671 -
- # 2 Short offline Completed without error 00% 38663 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment