API tools faq
paste
rayddteam

RPi first boot

rayddteam
May 18th, 2012
119
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.10 KB | None | 0 0
raw download clone embed print report
  1. Linux version 3.1.9+ (grayg@dc4-arm-01) (gcc version 4.5.1 (Broadcom-2708) ) #90 Wed Apr 18 18:23:05 BST 2012
  2. CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  3. CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  4. Machine: BCM2708
  5. Memory policy: ECC disabled, Data cache writeback
  6. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48768
  7. Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0x2 bcm2708.serial=0x3b2cf810 smsc95xx.macaddr=B8:27:EB:2C:F8:10 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
  8. PID hash table entries: 1024 (order: 0, 4096 bytes)
  9. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  10. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  11. Memory: 192MB = 192MB total
  12. Memory: 190720k/190720k available, 5888k reserved, 0K highmem
  13. Virtual kernel memory layout:
  14. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  15. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  16. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  17. vmalloc : 0xcc800000 - 0xd8000000 ( 184 MB)
  18. lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
  19. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  20. .text : 0xc0008000 - 0xc037b000 (3532 kB)
  21. .init : 0xc037b000 - 0xc0398000 ( 116 kB)
  22. .data : 0xc0398000 - 0xc03b5ce0 ( 120 kB)
  23. .bss : 0xc03b5d04 - 0xc0401198 ( 302 kB)
  24. NR_IRQS:85
  25. timer_set_mode: unhandled mode:1
  26. timer_set_mode: unhandled mode:3
  27. Console: colour dummy device 80x30
  28. console [tty1] enabled
  29. Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
  30. pid_max: default: 32768 minimum: 301
  31. Mount-cache hash table entries: 512
  32. CPU: Testing write buffer coherency: ok
  33. devtmpfs: initialized
  34. NET: Registered protocol family 16
  35. vc-mem: mm_vc_mem_phys_addr = 0x00000000
  36. vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB)
  37. mailbox: Broadcom VideoCore Mailbox driver
  38. bcm2708_vcio: mailbox at f200b880
  39. bcm_power: Broadcom power driver
  40. bcm_power_open() -> 0
  41. bcm_power_request(0, 8)
  42. bcm_mailbox_read -> 00000080, 0
  43. bcm_power_request -> 0
  44. Serial: AMBA PL011 UART driver
  45. dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  46. console [ttyAMA0] enabled
  47. bio: create slab <bio-0> at 0
  48. SCSI subsystem initialized
  49. usbcore: registered new interface driver usbfs
  50. usbcore: registered new interface driver hub
  51. usbcore: registered new device driver usb
  52. Switching to clocksource stc
  53. FS-Cache: Loaded
  54. CacheFiles: Loaded
  55. Switched to NOHz mode on CPU #0
  56. NET: Registered protocol family 2
  57. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  58. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  59. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  60. TCP: Hash tables configured (established 8192 bind 8192)
  61. TCP reno registered
  62. UDP hash table entries: 256 (order: 0, 4096 bytes)
  63. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  64. NET: Registered protocol family 1
  65. RPC: Registered named UNIX socket transport module.
  66. RPC: Registered udp transport module.
  67. RPC: Registered tcp transport module.
  68. RPC: Registered tcp NFSv4.1 backchannel transport module.
  69. bcm2708_dma: DMA manager at cc808000
  70. bcm2708_gpio: bcm2708_gpio_probe c039dd88
  71. vc-mem: Videocore memory driver
  72. VFS: Disk quotas dquot_6.5.2
  73. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  74. FS-Cache: Netfs 'nfs' registered for caching
  75. msgmni has been set to 372
  76. io scheduler noop registered
  77. io scheduler deadline registered
  78. io scheduler cfq registered (default)
  79. BCM2708FB: registering framebuffer (656, 416)
  80. bcm2708_fb_set_par info(cb888000) 656x416 (656x416), 0, 16
  81. BCM2708FB: start = cc900000,4d384000 width=656, height=416, bpp=16, pitch=1312 size=545792 success=0
  82. Console: switching to colour frame buffer device 82x26
  83. BCM2708FB: register framebuffer (0)
  84. brd: module loaded
  85. loop: module loaded
  86. vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
  87. vcos: [1]: vchiq_init_state: called
  88. vcos: [1]: vchiq: initialised - version 2 (min 2), device 253.0
  89. usbcore: registered new interface driver smsc95xx
  90. cdc_ncm: 04-Aug-2011
  91. usbcore: registered new interface driver cdc_ncm
  92. dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
  93. Core Release: 2.80a
  94. Setting default values for core params
  95. Finished setting default values for core params
  96. cc840008 -> 1
  97. Using Buffer DMA mode
  98. Periodic Transfer Interrupt Enhancement - disabled
  99. Multiprocessor Interrupt Enhancement - disabled
  100. Dedicated Tx FIFOs mode
  101. dwc_otg bcm2708_usb: DWC OTG Controller
  102. dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  103. dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
  104. Init: Port Power? op_state=1
  105. Init: Power Port (0)
  106. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  107. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  108. usb usb1: Product: DWC OTG Controller
  109. usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd
  110. usb usb1: SerialNumber: bcm2708_usb
  111. hub 1-0:1.0: USB hub found
  112. hub 1-0:1.0: 1 port detected
  113. Initializing USB Mass Storage driver...
  114. usbcore: registered new interface driver usb-storage
  115. USB Mass Storage support registered.
  116. usbcore: registered new interface driver libusual
  117. mousedev: PS/2 mouse device common for all mice
  118. cpuidle: using governor ladder
  119. cpuidle: using governor menu
  120. sdhci: Secure Digital Host Controller Interface driver
  121. sdhci: Copyright(c) Pierre Ossman
  122. bcm_power_open() -> 1
  123. mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  124. mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  125. sdhci-pltfm: SDHCI platform and OF driver helper
  126. usbcore: registered new interface driver usbhid
  127. usbhid: USB HID core driver
  128. TCP cubic registered
  129. Initializing XFRM netlink socket
  130. NET: Registered protocol family 17
  131. Registering the dns_resolver key type
  132. VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  133. Waiting for root device /dev/mmcblk0p2...
  134. mmc0: problem reading SD Status register.
  135. mmc0: error -110 whilst initialising SD card
  136. usb 1-1: new high speed USB device number 2 using dwc_otg
  137. mmc0: problem reading SD Status register.
  138. mmc0: error -110 whilst initialising SD card
  139. usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  140. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  141. hub 1-1:1.0: USB hub found
  142. hub 1-1:1.0: 3 ports detected
  143. mmc0: error -110 whilst initialising SD card
  144. mmc0: error -110 whilst initialising SD card
  145. usb 1-1.1: new high speed USB device number 3 using dwc_otg
  146. usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  147. usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  148. smsc95xx v1.0.4
  149. smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2c:f8:10
  150. mmc0: error -110 whilst initialising SD card
  151. mmc0: error -110 whilst initialising SD card
  152. mmc0: problem reading SD Status register.
  153. mmc0: error -110 whilst initialising SD card
  154. mmc0: problem reading SD Status register.
  155. mmc0: error -110 whilst initialising SD card
  156. mmc0: problem reading SD Status register.
  157. mmc0: error -110 whilst initialising SD card
  158. mmc0: problem reading SD Status register.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!