API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 8th, 2019
88
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.97 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 4.20.12-sunxi64 (root@nightly) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.76.190228 SMP Thu Feb 28 21:44:01 CET 2019
  3. [ 0.000000] Machine model: Orange Pi Lite 2
  4. [ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
  5. [ 0.000000] NUMA: No NUMA configuration found
  6. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  7. [ 0.000000] NUMA: NODE_DATA [mem 0x77fdb840-0x77fdcfff]
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
  10. [ 0.000000] Normal empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  14. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  15. [ 0.000000] On node 0 totalpages: 262144
  16. [ 0.000000] DMA32 zone: 4096 pages used for memmap
  17. [ 0.000000] DMA32 zone: 0 pages reserved
  18. [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
  19. [ 0.000000] psci: probing for conduit method from DT.
  20. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  21. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  22. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  23. [ 0.000000] psci: SMC Calling Convention v1.1
  24. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x3f0 with crng_init=0
  25. [ 0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s52696 r8192 d29224 u90112
  26. [ 0.000000] pcpu-alloc: s52696 r8192 d29224 u90112 alloc=22*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  28. [ 0.000000] Detected VIPT I-cache on CPU0
  29. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  30. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  31. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  32. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  33. [ 0.000000] Policy zone: DMA32
  34. [ 0.000000] Kernel command line: root=UUID=ba755b36-1ca2-442a-b2f8-3d1fd7d82b5a rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 panic=10 consoleblank=0 loglevel=1 ubootpart=95750fed-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1
  35. [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
  36. [ 0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
  37. [ 0.000000] printk: log_buf_len min size: 16384 bytes
  38. [ 0.000000] printk: log_buf_len: 32768 bytes
  39. [ 0.000000] printk: early log buf free: 13788(84%)
  40. [ 0.000000] Memory: 880236K/1048576K available (10238K kernel code, 708K rwdata, 2504K rodata, 576K init, 289K bss, 37268K reserved, 131072K cma-reserved)
  41. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  42. [ 0.000000] rcu: Hierarchical RCU implementation.
  43. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  44. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  45. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  46. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  47. [ 0.000000] GIC: Using split EOI/Deactivate mode
  48. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  49. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  50. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  51. [ 0.000183] Console: colour dummy device 80x25
  52. [ 0.000195] printk: console [tty1] enabled
  53. [ 0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  54. [ 0.000263] pid_max: default: 32768 minimum: 301
  55. [ 0.000344] LSM: Security Framework initializing
  56. [ 0.000353] AppArmor: AppArmor disabled by boot time parameter
  57. [ 0.000743] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  58. [ 0.000941] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  59. [ 0.000969] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  60. [ 0.000980] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  61. [ 0.002156] ASID allocator initialised with 32768 entries
  62. [ 0.002224] rcu: Hierarchical SRCU implementation.
  63. [ 0.002682] smp: Bringing up secondary CPUs ...
  64. [ 0.003350] Detected VIPT I-cache on CPU1
  65. [ 0.003401] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  66. [ 0.004011] Detected VIPT I-cache on CPU2
  67. [ 0.004041] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  68. [ 0.004592] Detected VIPT I-cache on CPU3
  69. [ 0.004619] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  70. [ 0.004683] smp: Brought up 1 node, 4 CPUs
  71. [ 0.004686] SMP: Total of 4 processors activated.
  72. [ 0.004691] CPU features: detected: 32-bit EL0 Support
  73. [ 0.004695] CPU features: detected: CRC32 instructions
  74. [ 0.006988] CPU: All CPU(s) started at EL2
  75. [ 0.007002] alternatives: patching kernel code
  76. [ 0.007926] devtmpfs: initialized
  77. [ 0.011652] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  78. [ 0.011698] futex hash table entries: 1024 (order: 4, 65536 bytes)
  79. [ 0.015399] xor: measuring software checksum speed
  80. [ 0.052073] 8regs : 1750.000 MB/sec
  81. [ 0.092107] 8regs_prefetch: 1560.000 MB/sec
  82. [ 0.132153] 32regs : 2151.000 MB/sec
  83. [ 0.172188] 32regs_prefetch: 1808.000 MB/sec
  84. [ 0.172192] xor: using function: 32regs (2151.000 MB/sec)
  85. [ 0.172241] pinctrl core: initialized pinctrl subsystem
  86. [ 0.172966] NET: Registered protocol family 16
  87. [ 0.173419] audit: initializing netlink subsys (disabled)
  88. [ 0.173573] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1
  89. [ 0.173993] cpuidle: using governor menu
  90. [ 0.174244] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  91. [ 0.174249] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  92. [ 0.175623] DMA: preallocated 2048 KiB pool for atomic allocations
  93. [ 0.175698] Serial: AMBA PL011 UART driver
  94. [ 0.184363] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  95. [ 0.184731] cryptd: max_cpu_qlen set to 1000
  96. [ 0.252356] raid6: int64x1 gen() 334 MB/s
  97. [ 0.320499] raid6: int64x1 xor() 335 MB/s
  98. [ 0.388538] raid6: int64x2 gen() 514 MB/s
  99. [ 0.456617] raid6: int64x2 xor() 458 MB/s
  100. [ 0.524743] raid6: int64x4 gen() 791 MB/s
  101. [ 0.592792] raid6: int64x4 xor() 581 MB/s
  102. [ 0.660912] raid6: int64x8 gen() 747 MB/s
  103. [ 0.728942] raid6: int64x8 xor() 570 MB/s
  104. [ 0.797076] raid6: neonx1 gen() 552 MB/s
  105. [ 0.865122] raid6: neonx1 xor() 647 MB/s
  106. [ 0.933254] raid6: neonx2 gen() 883 MB/s
  107. [ 1.001308] raid6: neonx2 xor() 917 MB/s
  108. [ 1.069409] raid6: neonx4 gen() 1148 MB/s
  109. [ 1.137484] raid6: neonx4 xor() 1099 MB/s
  110. [ 1.205557] raid6: neonx8 gen() 1256 MB/s
  111. [ 1.273647] raid6: neonx8 xor() 1167 MB/s
  112. [ 1.273650] raid6: using algorithm neonx8 gen() 1256 MB/s
  113. [ 1.273653] raid6: .... xor() 1167 MB/s, rmw enabled
  114. [ 1.273656] raid6: using neon recovery algorithm
  115. [ 1.274563] SCSI subsystem initialized
  116. [ 1.274709] usbcore: registered new interface driver usbfs
  117. [ 1.274737] usbcore: registered new interface driver hub
  118. [ 1.274787] usbcore: registered new device driver usb
  119. [ 1.274998] pps_core: LinuxPPS API ver. 1 registered
  120. [ 1.275000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  121. [ 1.275012] PTP clock support registered
  122. [ 1.275970] clocksource: Switched to clocksource arch_sys_counter
  123. [ 1.276086] VFS: Disk quotas dquot_6.6.0
  124. [ 1.276137] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  125. [ 1.281597] NET: Registered protocol family 2
  126. [ 1.282101] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
  127. [ 1.282143] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  128. [ 1.282230] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  129. [ 1.282373] TCP: Hash tables configured (established 8192 bind 8192)
  130. [ 1.282471] UDP hash table entries: 512 (order: 2, 16384 bytes)
  131. [ 1.282517] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  132. [ 1.282668] NET: Registered protocol family 1
  133. [ 1.283029] RPC: Registered named UNIX socket transport module.
  134. [ 1.283032] RPC: Registered udp transport module.
  135. [ 1.283034] RPC: Registered tcp transport module.
  136. [ 1.283037] RPC: Registered tcp NFSv4.1 backchannel transport module.
  137. [ 1.283229] Unpacking initramfs...
  138. [ 1.571212] Freeing initrd memory: 5332K
  139. [ 1.692432] Initialise system trusted keyrings
  140. [ 1.692589] workingset: timestamp_bits=44 max_order=18 bucket_order=0
  141. [ 1.697271] zbud: loaded
  142. [ 1.698554] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  143. [ 1.699170] NFS: Registering the id_resolver key type
  144. [ 1.699190] Key type id_resolver registered
  145. [ 1.699193] Key type id_legacy registered
  146. [ 1.699202] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  147. [ 1.699205] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  148. [ 1.699992] 9p: Installing v9fs 9p2000 file system support
  149. [ 1.802552] NET: Registered protocol family 38
  150. [ 1.804880] Key type asymmetric registered
  151. [ 1.804886] Asymmetric key parser 'x509' registered
  152. [ 1.804949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  153. [ 1.805099] io scheduler noop registered
  154. [ 1.805102] io scheduler deadline registered
  155. [ 1.805252] io scheduler cfq registered (default)
  156. [ 1.805255] io scheduler mq-deadline registered
  157. [ 1.805258] io scheduler kyber registered
  158. [ 1.805353] io scheduler bfq registered
  159. [ 1.806055] sun4i-usb-phy 5100400.phy: Couldn't get regulator usb0_vbus... Deferring probe
  160. [ 1.806320] sun50i-usb3-phy 5210000.phy: failed to get phy clock
  161. [ 1.809688] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  162. [ 1.816222] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  163. [ 1.818254] cacheinfo: Unable to detect cache hierarchy for CPU 0
  164. [ 1.822339] loop: module loaded
  165. [ 1.823215] libphy: Fixed MDIO Bus: probed
  166. [ 1.823753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  167. [ 1.823756] ehci-platform: EHCI generic platform driver
  168. [ 1.823924] ehci-platform 5101000.usb: EHCI Host Controller
  169. [ 1.823943] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
  170. [ 1.825152] ehci-platform 5101000.usb: irq 16, io mem 0x05101000
  171. [ 1.839982] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  172. [ 1.840195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  173. [ 1.840201] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  174. [ 1.840206] usb usb1: Product: EHCI Host Controller
  175. [ 1.840211] usb usb1: Manufacturer: Linux 4.20.12-sunxi64 ehci_hcd
  176. [ 1.840216] usb usb1: SerialNumber: 5101000.usb
  177. [ 1.840629] hub 1-0:1.0: USB hub found
  178. [ 1.840665] hub 1-0:1.0: 1 port detected
  179. [ 1.841168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  180. [ 1.841185] ohci-platform: OHCI generic platform driver
  181. [ 1.841312] ohci-platform 5101400.usb: Generic Platform OHCI controller
  182. [ 1.841328] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
  183. [ 1.841618] ohci-platform 5101400.usb: irq 17, io mem 0x05101400
  184. [ 1.904167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
  185. [ 1.904174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  186. [ 1.904179] usb usb2: Product: Generic Platform OHCI controller
  187. [ 1.904183] usb usb2: Manufacturer: Linux 4.20.12-sunxi64 ohci_hcd
  188. [ 1.904188] usb usb2: SerialNumber: 5101400.usb
  189. [ 1.904593] hub 2-0:1.0: USB hub found
  190. [ 1.904629] hub 2-0:1.0: 1 port detected
  191. [ 1.905292] usbcore: registered new interface driver usb-storage
  192. [ 1.905661] mousedev: PS/2 mouse device common for all mice
  193. [ 1.906009] sun6i-rtc 7000000.rtc: rtc core: registered rtc-sun6i as rtc0
  194. [ 1.906014] sun6i-rtc 7000000.rtc: RTC enabled
  195. [ 1.906054] i2c /dev entries driver
  196. [ 1.906580] axp20x-i2c 0-0036: AXP20x variant AXP806 found
  197. [ 1.911772] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0
  198. [ 1.912870] dcdca: supplied by regulator-dummy
  199. [ 1.913898] dcdcc: supplied by regulator-dummy
  200. [ 1.914458] dcdcd: supplied by regulator-dummy
  201. [ 1.914897] vdd-sys: Bringing 900000uV into 960000-960000uV
  202. [ 1.915330] dcdce: supplied by regulator-dummy
  203. [ 1.915788] vcc-dram: Bringing 1200000uV into 1400000-1400000uV
  204. [ 1.916207] aldo1: supplied by regulator-dummy
  205. [ 1.916751] aldo2: supplied by regulator-dummy
  206. [ 1.917192] vcc-ac200: Bringing 700000uV into 3300000-3300000uV
  207. [ 1.917611] aldo3: supplied by regulator-dummy
  208. [ 1.918069] vcc-3v3-1: Bringing 700000uV into 3300000-3300000uV
  209. [ 1.918796] bldo1: supplied by regulator-dummy
  210. [ 1.919762] bldo2: supplied by regulator-dummy
  211. [ 1.920336] bldo3: supplied by regulator-dummy
  212. [ 1.920795] vcc-wifi-io: Bringing 700000uV into 1800000-1800000uV
  213. [ 1.921209] bldo4: supplied by regulator-dummy
  214. [ 1.921766] cldo1: supplied by regulator-dummy
  215. [ 1.922326] cldo2: supplied by regulator-dummy
  216. [ 1.922786] vcc-wifi-1: Bringing 700000uV into 3300000-3300000uV
  217. [ 1.923528] cldo3: supplied by regulator-dummy
  218. [ 1.923971] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV
  219. [ 1.924715] sw: supplied by regulator-dummy
  220. [ 1.924835] axp20x-i2c 0-0036: AXP20X driver loaded
  221. [ 1.925544] sdhci: Secure Digital Host Controller Interface driver
  222. [ 1.925547] sdhci: Copyright(c) Pierre Ossman
  223. [ 1.925566] Synopsys Designware Multimedia Card Interface Driver
  224. [ 1.925809] sdhci-pltfm: SDHCI platform and OF driver helper
  225. [ 1.926343] ledtrig-cpu: registered to indicate activity on CPUs
  226. [ 1.926569] hidraw: raw HID events driver (C) Jiri Kosina
  227. [ 1.926648] usbcore: registered new interface driver usbhid
  228. [ 1.926650] usbhid: USB HID core driver
  229. [ 1.927749] NET: Registered protocol family 10
  230. [ 1.942332] Segment Routing with IPv6
  231. [ 1.942419] NET: Registered protocol family 17
  232. [ 1.942574] 8021q: 802.1Q VLAN Support v1.8
  233. [ 1.942725] 9pnet: Installing 9P2000 support
  234. [ 1.942778] Key type dns_resolver registered
  235. [ 1.943368] registered taskstats version 1
  236. [ 1.943371] Loading compiled-in X.509 certificates
  237. [ 1.943441] zswap: loaded using pool lzo/zbud
  238. [ 1.944422] Btrfs loaded, crc32c=crc32c-generic
  239. [ 1.953397] Key type encrypted registered
  240. [ 1.960673] sun4i-usb-phy 5100400.phy: Linked as a consumer to regulator.18
  241. [ 1.961043] phy phy-5210000.phy.2: Linked as a consumer to regulator.18
  242. [ 1.965257] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  243. [ 1.965784] printk: console [ttyS0] disabled
  244. [ 1.986672] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 14, base_baud = 1500000) is a 16550A
  245. [ 1.986719] printk: console [ttyS0] enabled
  246. [ 2.091983] ehci-platform 5311000.usb: EHCI Host Controller
  247. [ 2.092002] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3
  248. [ 2.092612] ehci-platform 5311000.usb: irq 18, io mem 0x05311000
  249. [ 2.107982] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  250. [ 2.108123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  251. [ 2.108130] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  252. [ 2.108134] usb usb3: Product: EHCI Host Controller
  253. [ 2.108139] usb usb3: Manufacturer: Linux 4.20.12-sunxi64 ehci_hcd
  254. [ 2.108144] usb usb3: SerialNumber: 5311000.usb
  255. [ 2.108518] hub 3-0:1.0: USB hub found
  256. [ 2.108544] hub 3-0:1.0: 1 port detected
  257. [ 2.109135] ohci-platform 5311400.usb: Generic Platform OHCI controller
  258. [ 2.109154] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 4
  259. [ 2.109378] ohci-platform 5311400.usb: irq 19, io mem 0x05311400
  260. [ 2.172229] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
  261. [ 2.172235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  262. [ 2.172240] usb usb4: Product: Generic Platform OHCI controller
  263. [ 2.172245] usb usb4: Manufacturer: Linux 4.20.12-sunxi64 ohci_hcd
  264. [ 2.172250] usb usb4: SerialNumber: 5311400.usb
  265. [ 2.172584] hub 4-0:1.0: USB hub found
  266. [ 2.172615] hub 4-0:1.0: 1 port detected
  267. [ 2.173218] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  268. [ 2.173262] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0
  269. [ 2.173488] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  270. [ 2.173496] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
  271. [ 2.173647] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  272. [ 2.173653] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  273. [ 2.173658] usb usb5: Product: MUSB HDRC host driver
  274. [ 2.173662] usb usb5: Manufacturer: Linux 4.20.12-sunxi64 musb-hcd
  275. [ 2.173667] usb usb5: SerialNumber: musb-hdrc.1.auto
  276. [ 2.173982] hub 5-0:1.0: USB hub found
  277. [ 2.174011] hub 5-0:1.0: 1 port detected
  278. [ 2.175282] sunxi-mmc 4020000.mmc: Linked as a consumer to regulator.1
  279. [ 2.175575] sunxi-mmc 4021000.mmc: Linked as a consumer to regulator.15
  280. [ 2.175621] sunxi-mmc 4021000.mmc: Linked as a consumer to regulator.12
  281. [ 2.176040] of_cfs_init
  282. [ 2.176089] sunxi-mmc 4020000.mmc: Got CD GPIO
  283. [ 2.176126] of_cfs_init: OK
  284. [ 2.176159] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
  285. [ 2.176318] vcc1v8: disabling
  286. [ 2.176324] vdd-gpu: disabling
  287. [ 2.200734] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  288. [ 2.239592] mmc0: host does not support reading read-only switch, assuming write-enable
  289. [ 2.242521] mmc0: new high speed SDHC card at address aaaa
  290. [ 2.243525] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  291. [ 2.246431] mmcblk0: p1
  292. [ 2.408537] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  293. [ 2.408807] Freeing unused kernel memory: 576K
  294. [ 2.408887] Run /init as init process
  295. [ 2.409511] random: fast init done
  296. [ 2.424782] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  297. [ 2.426327] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  298. [ 2.427868] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  299. [ 2.430684] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  300. [ 2.434052] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
  301. [ 2.437225] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  302. [ 2.437577] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  303. [ 2.437615] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  304. [ 2.486430] mmc1: new high speed SDIO card at address 0001
  305. [ 3.805399] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  306. [ 5.419418] systemd[1]: System time before build time, advancing clock.
  307. [ 5.503541] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  308. [ 5.503888] systemd[1]: Detected architecture arm64.
  309. [ 5.506591] systemd[1]: Set hostname to <orangepilite2>.
  310. [ 6.271124] systemd[1]: Listening on Journal Socket (/dev/log).
  311. [ 6.271889] systemd[1]: Listening on udev Control Socket.
  312. [ 6.272161] systemd[1]: Listening on fsck to fsckd communication Socket.
  313. [ 6.272335] systemd[1]: Reached target Swap.
  314. [ 6.272730] systemd[1]: Listening on Journal Audit Socket.
  315. [ 6.273455] systemd[1]: Created slice System Slice.
  316. [ 6.275662] systemd[1]: Mounting Debug File System...
  317. [ 6.548020] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  318. [ 6.648243] systemd-journald[370]: Received request to flush runtime journal from PID 1
  319. [ 7.784394] zram: Added device: zram0
  320. [ 7.784736] zram: Added device: zram1
  321. [ 7.785459] zram: Added device: zram2
  322. [ 7.785825] zram: Added device: zram3
  323. [ 7.786185] zram: Added device: zram4
  324. [ 7.786587] zram: Added device: zram5
  325. [ 7.915367] zram1: detected capacity change from 0 to 130203648
  326. [ 8.033838] Adding 127148k swap on /dev/zram1. Priority:5 extents:1 across:127148k SSFS
  327. [ 8.040290] zram2: detected capacity change from 0 to 130203648
  328. [ 8.061673] Adding 127148k swap on /dev/zram2. Priority:5 extents:1 across:127148k SSFS
  329. [ 8.064137] zram3: detected capacity change from 0 to 130203648
  330. [ 8.089532] Adding 127148k swap on /dev/zram3. Priority:5 extents:1 across:127148k SSFS
  331. [ 8.091837] zram4: detected capacity change from 0 to 130203648
  332. [ 8.118728] Adding 127148k swap on /dev/zram4. Priority:5 extents:1 across:127148k SSFS
  333. [ 8.380320] thermal thermal_zone0: failed to read out thermal zone (-16)
  334. [ 8.380361] thermal thermal_zone1: failed to read out thermal zone (-16)
  335. [ 8.550167] cpu cpu0: Linked as a consumer to regulator.3
  336. [ 8.550214] cpu cpu0: Dropping the link to regulator.3
  337. [ 8.550347] cpu cpu0: Linked as a consumer to regulator.3
  338. [ 8.550747] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 912000 KHz
  339. [ 8.551212] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1008000 KHz
  340. [ 8.551436] thermal thermal_zone0: failed to read out thermal zone (-16)
  341. [ 8.667198] zram0: detected capacity change from 0 to 52428800
  342. [ 8.675775] random: crng init done
  343. [ 8.675784] random: 7 urandom warning(s) missed due to ratelimiting
  344. [ 9.057017] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  345. [ 9.063370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  346. [ 9.064867] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  347. [ 9.064878] cfg80211: failed to load regulatory.db
  348. [ 9.165205] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  349. [ 9.295611] Bluetooth: Core ver 2.22
  350. [ 9.295682] NET: Registered protocol family 31
  351. [ 9.295685] Bluetooth: HCI device and connection manager initialized
  352. [ 9.295701] Bluetooth: HCI socket layer initialized
  353. [ 9.295707] Bluetooth: L2CAP socket layer initialized
  354. [ 9.295720] Bluetooth: SCO socket layer initialized
  355. [ 9.381903] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  356. [ 9.384068] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
  357. [ 11.513155] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  358. [ 11.571647] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  359. [ 16.693267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  360. [ 16.717939] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  361. [ 18.482395] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  362. [ 27.240619] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!