Guest User

Untitled

a guest
May 27th, 2018
229
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.74 KB | None | 0 0
  1.  
  2. ɥ
  3. ±5
  4. Out: serial
  5. Err: serial
  6.  
  7.  
  8. No valid address in Flash. Using fixed address
  9. No valid address in Flash. Using fixed address
  10. CFG Value ==> 4
  11. : cfg1 0xf cfg2 0x7014
  12. ÒÒº2é09:0b:ad
  13. ªÁ5
  14. Virian MDC CFG Value ==> 4
  15. : cfg1 0xf cfg2 0x7214
  16. ÒÒº2é09:0b:ad
  17. ATHRS26: resetting s26
  18. 26: s26 reset done
  19. up
  20. eth0, eth1
  21. Autobooting in 1 seconds
  22. òþ240> 0x9f020000 +0x3c0000First 0x2 last 0x3d sector size ѽÉÍ500 ¢ª²ºÂÊ¢ª²ºÂÊ¢ª²ºÂÊ¢ª²ºÂÊ¢¢¢¢¢¢¢ª¢²¢º¢Â¢Êªªªªª¢ªªª²ªºªÂªÊ²²þ² ar7240> 0x81000000 mini.bin speed 1000
  23. Ñ¡Å device
  24. TFTP from server 192.168.1.27; our IP address is 192.168.1.10
  25. Filename 'mini.bin'.
  26. Load address: 0x81000000
  27. Loading: þþ4
  28. Bytes transferred = 3932160 (3c0000 hex)
  29. òþ0x81000000 0x9f020000 0x3c0000åto Flash... write addr: 9f020000
  30. ar7240> 0x9f020000 Booting image at 9f020000 ...
  31. Uncompressing Kernel Image ...
  32. Starting kernel ...
  33.  
  34. ¹]ÉÑkernel loader for AR7XXX/AR9XXX
  35. Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  36. Looking for OpenWrt image... found at 0xbf022000
  37. kernel at 80060000.....
  38.  
  39. rêLinux version 2.6.39.4 (cindy@cindy-laptop) (gcc version 4.5.4 20120105 (prerelease) (Linaro GCC 4.5-2012.01) ) #30 Tue Jan 17 05:09:59 WIT 2012
  40. [ 0.000000] bootconsole [early0] enabled
  41. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  42. [ 0.000000] SoC: Atheros AR7241 rev 1
  43. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
  44. [ 0.000000] Determined physical RAM map:
  45. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  46. 0.000000] Initrd not found or empty - disabling initrd
  47. [ 0.000000] Zone PFN ranges:
  48. [ 0.000000] Normal 0x00000000 -> 0x00002000
  49. [ 0.000000] Movable zone start PFN for each node
  50. [ 0.000000] early_node_map[1] active PFN ranges
  51. [ 0.000000] 0: 0x00000000 -> 0x00002000
  52. 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  53. [ 0.000000] Kernel command line: board=TL-MR3420 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  54. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  55. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  56. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  57. rêPrimary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  58. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  59. rêWriting ErrCtl register=00000000
  60. [ 0.000000] Readback ErrCtl register=00000000
  61. rêMemory: 29352k/32768k available (2013k kernel code, 3416k reserved, 396k data, 188k init, 0k highmem)
  62. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  63. [ 0.000000] NR_IRQS:80
  64. rêCalibrating delay loop... BogoMIPS (lpj=1327104)
  65. [ 0.080000] pid_max: default: 32768 minimum: 301
  66. [ 0.080000] Mount-cache hash table entries: 512
  67. rÊêNET: Registered protocol family 16
  68. rêMIPS: machine is TP-LINK TL-MR3420
  69. rºêregistering PCI controller with io_map_base unset
  70. rº¢êbio: create slab <bio-0> at 0
  71. rºªêpci 0000:00:00.0: fixup device configuration
  72. rºªêpci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
  73. [ 0.760000] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff])
  74. [ 0.770000] PCI: mapping irq 72 to pin1@0000:00:00.0
  75. rººêSwitching to clocksource MIPS
  76. 0.780000] NET: Registered protocol family 2
  77. [ 0.780000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  78. rºÂêTCP established hash table entries: 1024 (order: 1, 8192 bytes)
  79. [ 0.790000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  80. [ 0.790000] TCP: Hash tables configured (established 1024 bind 1024)
  81. [ 0.800000] TCP reno registered
  82. [ 0.800000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  83. [ 0.810000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  84. 0.810000] NET: Registered protocol family 1
  85. rÂêsquashfs: version 4.0 (2009/01/31) Phillip Lougher
  86. [ 0.840000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  87. r廐msgmni has been set to 57
  88. [ 0.860000] io scheduler noop registered
  89. [ 0.860000] io scheduler deadline registered (default)
  90. r²êSerial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  91. 0.890000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  92. [ 0.900000] console [ttyS0] enabled, bootconsole disabled
  93. [ 0.900000] console [ttyS0] enabled, bootconsole disabled
  94. rÊêAtheros AR71xx SPI Controller driver version 0.2.4
  95. rÊêm25p80 spi0.0: found s25sl032a, expected m25p80
  96. [ 0.930000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
  97. rÊê5 tp-link partitions found on MTD device spi0.0
  98. [ 0.940000] Creating 5 MTD partitions on "spi0.0":
  99. [ 0.940000] 0x000000000000-0x000000020000 : "u-boot"
  100. r滐0x000000020000-0x0000000f7600 : "kernel"
  101. [ 0.950000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  102. r漐0x0000000f7600-0x0000003f0000 : "rootfs"
  103. [ 0.970000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  104. rÊÊêmtd: partition "rootfs" set to be root filesystem
  105. [ 0.990000] mtd: partition "rootfs_data" created automatically, ofs=2D0000, len=120000
  106. [ 1.000000] 0x0000002d0000-0x0000003f0000 : "rootfs_data"
  107. rê0x0000003f0000-0x000000400000 : "art"
  108. rê0x000000020000-0x0000003f0000 : "firmware"
  109. rºêag71xx_mdio: probed
  110. rºêeth0: Atheros AG71xx at 0xba000000, irq 5
  111. rʲêeth0: Found an AR7240/AR9330 built-in switch
  112. 1.980000] eth1: Atheros AG71xx at 0xb9000000, irq 4
  113. rªÊêAtheros AR71xx hardware watchdog driver version 0.1.0
  114. 2.590000] TCP westwood registered
  115. [ 2.600000] NET: Registered protocol family 17
  116. r²ê802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  117. [ 2.610000] All bugs added by David S. Miller <davem@redhat.com>
  118. r²êVFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  119. r²êFreeing unused kernel memory: 188k freed
  120. 5.180000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
  121. ªrêButton Hotplug driver version 0.4.1
  122. Ë+-
  123. the [f] key and hit [enter] to enter failsafe mode
  124. ªr¢Êêeth0: link up (1000Mbps/Full duplex)
  125. Épreinit -
  126. r½Ñready yet; using ramdisk
  127. jj
  128. Ârºêeth0: link down
  129. 10.820000] Compat-wireless backport release: compat-wireless-2011-11-29
  130. [ 10.830000] Backport based on wireless-testing.git master-2011-12-01
  131. rʲêcfg80211: Calling CRDA to update world regulatory domain
  132. r¢Âêcfg80211: World regulatory domain updated:
  133. [ 11.490000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  134. [ 11.490000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  135. [ 11.500000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  136. [ 11.510000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  137. [ 11.520000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  138. [ 11.530000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  139. rêusbcore: registered new interface driver usbfs
  140. 12.020000] usbcore: registered new interface driver hub
  141. rêusbcore: registered new device driver usb
  142. rêieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=72
  143. rêcfg80211: Calling CRDA for country: US
  144. 13.260000] cfg80211: Regulatory domain changed to country: US
  145. [ 13.270000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  146. [ 13.270000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  147. [ 13.280000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  148. [ 13.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  149. [ 13.300000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  150. [ 13.310000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  151. [ 13.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  152. r²êPPP generic driver version 2.4.2
  153. 13.680000] ip_tables: (C) 2000-2006 Netfilter Core Team
  154. rÂêNET: Registered protocol family 24
  155. ¢rêehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  156. [ 14.030000] ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
  157. [ 14.030000] ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
  158. 14.070000] ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
  159. 14.090000] ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
  160. ¢rÊêhub 1-0:1.0: USB hub found
  161. [ 14.100000] hub 1-0:1.0: 1 port detected
  162. ¢rÊênf_conntrack version 0.5.0 (461 buckets, 1844 max)
  163. 14.440000] usb 1-1: new full speed USB device number 2 using ar71xx-ehci
  164. ¢r²²êusbcore: registered new interface driver usbserial
  165. [ 14.660000] USB Serial support registered for generic
  166. ¢r²Âêusbcore: registered new interface driver usbserial_generic
  167. [ 14.680000] usbserial: USB Serial Driver core
  168. ¢rºêhso: drivers/net/usb/hso.c: Option Wireless
  169. ¢rº¢êusbcore: registered new interface driver hso
  170. ¢rÂÂêUSB Serial support registered for GSM modem (1-port)
  171. ¢rÂÊêusbcore: registered new interface driver option
  172. [ 14.890000] option: v0.7.2:USB Driver for GSM modems
  173. X®ÉÍÍEnter to activate this console. ²rÂÊêeth0: link up (1000Mbps/Full duplex)
  174. 16.940000] device eth0 entered promiscuous mode
  175. ºrêbr-lan: port 1(eth0) entering forwarding state
  176. [ 17.030000] br-lan: port 1(eth0) entering forwarding state
  177. Êr²êusb 1-1: USB disconnect, device number 2
  178. rʲêusb 1-1: new full speed USB device number 3 using ar71xx-ehci
  179. rêoption 1-1:1.0: GSM modem (1-port) converter detected
  180. 21.120000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
  181. r¢êoption 1-1:1.1: GSM modem (1-port) converter detected
  182. 21.140000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
  183. rªêoption 1-1:1.2: GSM modem (1-port) converter detected
  184. r²êusb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
  185. rºêoption 1-1:1.3: GSM modem (1-port) converter detected
  186. rÂêusb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
  187. rêoption 1-1:1.4: GSM modem (1-port) converter detected
  188. rêusb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
  189. ÊrÊêjffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  190. ÊrÊêjffs2_build_filesystem(): unlocking the mtd device... done.
  191. [ 29.930000] jffs2_build_filesystem(): erasing all blocks after the end marker... à²rêJFFS2 notice: (1358) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Add Comment
Please, Sign In to add comment