Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version V1.13 20220218
- ln
- ddrconfig:7
- LPDDR4X, 324MHz
- BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=8192MB
- tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps,
- tdqss: cs1 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps,
- change to: 324MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:24%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x63
- change to: 528MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:24%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 780MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:24%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 1056MHz(final freq)
- PHY drv:clk:36,ca:36,DQ:29,odt:60
- vrefinner:16%, vrefout:22%
- dram drv:40,odt:80
- vref_ca:00000071
- clk skew:0x35
- cs 0:
- the read training result:
- DQS0:0x3b, DQS1:0x3e, DQS2:0x3f, DQS3:0x37,
- min : 0xa 0xb 0xd 0xb 0x1 0x3 0x7 0x3 , 0x9 0x9 0x2 0x1 0xe 0xc 0xc 0xa ,
- 0x10 0x10 0xc 0xa 0x5 0x0 0x4 0x7 , 0xa 0x7 0x7 0x2 0xf 0xe 0xa 0xf ,
- mid :0x29 0x2a 0x2b 0x2a 0x1f 0x22 0x25 0x22 ,0x28 0x28 0x21 0x21 0x2b 0x2a 0x2b 0x29 ,
- 0x2e 0x2e 0x2a 0x28 0x23 0x1f 0x22 0x25 ,0x2a 0x27 0x26 0x22 0x2e 0x2d 0x2a 0x2e ,
- max :0x48 0x49 0x4a 0x49 0x3e 0x41 0x43 0x41 ,0x47 0x48 0x40 0x41 0x49 0x48 0x4a 0x49 ,
- 0x4c 0x4d 0x48 0x47 0x41 0x3f 0x41 0x44 ,0x4a 0x47 0x46 0x43 0x4e 0x4d 0x4a 0x4d ,
- range:0x3e 0x3e 0x3d 0x3e 0x3d 0x3e 0x3c 0x3e ,0x3e 0x3f 0x3e 0x40 0x3b 0x3c 0x3e 0x3f ,
- 0x3c 0x3d 0x3c 0x3d 0x3c 0x3f 0x3d 0x3d ,0x40 0x40 0x3f 0x41 0x3f 0x3f 0x40 0x3e ,
- the write training result:
- DQS0:0x32, DQS1:0x29, DQS2:0x2f, DQS3:0x1f,
- min :0x5a 0x5c 0x5d 0x5b 0x50 0x53 0x57 0x57 0x57 ,0x50 0x4f 0x49 0x48 0x53 0x51 0x53 0x51 0x4e ,
- 0x58 0x58 0x54 0x54 0x4d 0x4a 0x4b 0x51 0x51 ,0x4a 0x48 0x47 0x44 0x4d 0x4d 0x4a 0x4f 0x47 ,
- mid :0x78 0x79 0x7b 0x78 0x6d 0x6f 0x74 0x73 0x73 ,0x6d 0x6c 0x66 0x66 0x70 0x6d 0x6f 0x6e 0x6b ,
- 0x73 0x73 0x6f 0x6f 0x68 0x64 0x66 0x6b 0x6d ,0x66 0x63 0x62 0x60 0x6a 0x69 0x65 0x6b 0x63 ,
- max :0x96 0x97 0x99 0x96 0x8b 0x8c 0x91 0x8f 0x8f ,0x8a 0x8a 0x83 0x84 0x8d 0x8a 0x8b 0x8b 0x88 ,
- 0x8f 0x8f 0x8a 0x8b 0x84 0x7f 0x82 0x86 0x8a ,0x82 0x7f 0x7e 0x7c 0x87 0x86 0x81 0x88 0x7f ,
- range:0x3c 0x3b 0x3c 0x3b 0x3b 0x39 0x3a 0x38 0x38 ,0x3a 0x3b 0x3a 0x3c 0x3a 0x39 0x38 0x3a 0x3a ,
- 0x37 0x37 0x36 0x37 0x37 0x35 0x37 0x35 0x39 ,0x38 0x37 0x37 0x38 0x3a 0x39 0x37 0x39 0x38 ,
- cs 1:
- the read training result:
- DQS0:0x3b, DQS1:0x3e, DQS2:0x3f, DQS3:0x34,
- min : 0xa 0xb 0xd 0xa 0x1 0x3 0x7 0x2 , 0xa 0xa 0x4 0x1 0xe 0xd 0xe 0xb ,
- 0x10 0x11 0xd 0xb 0x5 0x1 0x4 0x9 , 0x9 0x6 0x5 0x1 0xd 0xd 0x9 0xc ,
- mid :0x28 0x29 0x2b 0x29 0x1e 0x21 0x24 0x21 ,0x27 0x28 0x21 0x20 0x2a 0x29 0x2b 0x29 ,
- 0x2d 0x2c 0x28 0x27 0x22 0x1d 0x20 0x23 ,0x26 0x24 0x22 0x1e 0x2a 0x2a 0x26 0x2b ,
- max :0x46 0x47 0x4a 0x48 0x3c 0x3f 0x41 0x41 ,0x45 0x46 0x3e 0x3f 0x46 0x45 0x48 0x47 ,
- 0x4a 0x48 0x44 0x43 0x40 0x3a 0x3c 0x3d ,0x43 0x43 0x40 0x3c 0x48 0x48 0x44 0x4b ,
- range:0x3c 0x3c 0x3d 0x3e 0x3b 0x3c 0x3a 0x3f ,0x3b 0x3c 0x3a 0x3e 0x38 0x38 0x3a 0x3c ,
- 0x3a 0x37 0x37 0x38 0x3b 0x39 0x38 0x34 ,0x3a 0x3d 0x3b 0x3b 0x3b 0x3b 0x3b 0x3f ,
- the write training result:
- DQS0:0x32, DQS1:0x29, DQS2:0x2f, DQS3:0x1f,
- min :0x58 0x5b 0x5c 0x5a 0x4f 0x53 0x56 0x56 0x56 ,0x4d 0x4e 0x48 0x47 0x52 0x50 0x52 0x50 0x4e ,
- 0x55 0x55 0x51 0x52 0x4d 0x48 0x4b 0x4f 0x4f ,0x47 0x46 0x45 0x43 0x4d 0x4d 0x48 0x4e 0x46 ,
- mid :0x76 0x78 0x7a 0x77 0x6c 0x6f 0x73 0x72 0x72 ,0x6b 0x6a 0x64 0x65 0x6e 0x6b 0x6d 0x6c 0x6a ,
- 0x72 0x73 0x6e 0x6e 0x69 0x60 0x66 0x6a 0x6c ,0x65 0x63 0x61 0x60 0x6a 0x6a 0x64 0x6b 0x63 ,
- max :0x95 0x96 0x98 0x95 0x89 0x8b 0x90 0x8e 0x8f ,0x8a 0x87 0x81 0x83 0x8b 0x87 0x89 0x89 0x87 ,
- 0x8f 0x91 0x8b 0x8b 0x85 0x79 0x81 0x86 0x8a ,0x84 0x80 0x7d 0x7d 0x87 0x87 0x81 0x88 0x80 ,
- range:0x3d 0x3b 0x3c 0x3b 0x3a 0x38 0x3a 0x38 0x39 ,0x3d 0x39 0x39 0x3c 0x39 0x37 0x37 0x39 0x39 ,
- 0x3a 0x3c 0x3a 0x39 0x38 0x31 0x36 0x37 0x3b ,0x3d 0x3a 0x38 0x3a 0x3a 0x3a 0x39 0x3a 0x3a ,
- CA Training result:
- cs:0 min :0x41 0x3e 0x3a 0x32 0x39 0x31 0x3c ,0x44 0x3b 0x3a 0x2f 0x3a 0x30 0x3e ,
- cs:0 mid :0x7e 0x7f 0x77 0x74 0x76 0x74 0x6b ,0x7f 0x7d 0x74 0x72 0x75 0x73 0x6c ,
- cs:0 max :0xbc 0xc0 0xb4 0xb7 0xb3 0xb8 0x9a ,0xbb 0xc0 0xaf 0xb6 0xb0 0xb7 0x9a ,
- cs:0 range:0x7b 0x82 0x7a 0x85 0x7a 0x87 0x5e ,0x77 0x85 0x75 0x87 0x76 0x87 0x5c ,
- cs:1 min :0x3e 0x3e 0x36 0x31 0x36 0x32 0x36 ,0x41 0x3d 0x37 0x30 0x38 0x33 0x38 ,
- cs:1 mid :0x7d 0x7e 0x75 0x72 0x74 0x72 0x68 ,0x7f 0x7e 0x74 0x71 0x75 0x74 0x69 ,
- cs:1 max :0xbc 0xbe 0xb4 0xb3 0xb3 0xb3 0x9a ,0xbe 0xbf 0xb2 0xb3 0xb2 0xb5 0x9a ,
- cs:1 range:0x7e 0x80 0x7e 0x82 0x7d 0x81 0x64 ,0x7d 0x82 0x7b 0x83 0x7a 0x82 0x62 ,
- out
- U-Boot SPL board init
- U-Boot SPL 2017.09 (May 23 2023 - 19:01:59)
- unrecognized JEDEC id bytes: ff, ff, ff
- Trying to boot from MMC2
- No misc partition
- spl: partition error
- Trying fit image at 0x4000 sector
- ## Verified-boot: 0
- ## Checking atf-1 0x00040000 ... sha256(6204b6f381...) + OK
- ## Checking uboot 0x00a00000 ... sha256(6675101398...) + OK
- ## Checking fdt 0x00b16938 ... sha256(fcfda359c0...) + OK
- ## Checking atf-2 0xfdcc1000 ... sha256(5563d929da...) + OK
- ## Checking atf-3 0x0006a000 ... sha256(b04372ab0f...) + OK
- ## Checking atf-4 0xfdcd0000 ... sha256(b46eaa95b8...) + OK
- ## Checking atf-5 0xfdcce000 ... sha256(2f8839c803...) + OK
- ## Checking atf-6 0x00068000 ... sha256(6e9d32ba23...) + OK
- Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
- Total: 668.753 ms
- INFO: Preloader serial: 2
- NOTICE: BL31: v2.3():v2.3-365-gae7c295ca:derrick.huang
- NOTICE: BL31: Built : 15:37:13, May 17 2022
- INFO: GICv3 without legacy support detected.
- INFO: ARM GICv3 driver initialized in EL3
- INFO: pmu v1 is valid 220114
- INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz
- INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
- INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
- INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0xa00000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09 (May 23 2023 - 19:01:59 +0700)
- Model: Rockchip RK3568 Evaluation Board
- PreSerial: 2, raw, 0xfe660000
- DRAM: 7.7 GiB
- Sysmem: init
- Relocation Offset: ed363000
- Relocation fdt: eb9f8600 - eb9fecc8
- CR: M/C/I
- Using default environment
- no mmc device at slot 1
- dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0
- Bootdev(atags): mmc 1
- MMC1: Legacy, 52Mhz
- PartType: EFI
- DM: v1
- No misc partition
- boot mode: None
- No resource partition
- No resource partition
- Failed to load DTB, ret=-19
- No find valid DTB, ret=-22
- Failed to get kernel dtb, ret=-22
- io-domain: OK
- Failed to get scmi clk dev
- Model: Rockchip RK3568 Evaluation Board
- rockchip_set_serialno: could not find efuse/otp device
- CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
- apll 816000 KHz
- dpll 528000 KHz
- gpll 1188000 KHz
- cpll 1000000 KHz
- npll 24000 KHz
- vpll 24000 KHz
- hpll 24000 KHz
- ppll 200000 KHz
- armclk 816000 KHz
- aclk_bus 150000 KHz
- pclk_bus 50000 KHz
- aclk_top_high 300000 KHz
- aclk_top_low 200000 KHz
- hclk_top 150000 KHz
- pclk_top 50000 KHz
- aclk_perimid 300000 KHz
- hclk_perimid 150000 KHz
- pclk_pmu 100000 KHz
- No misc partition
- Net: No ethernet found.
- Hit key to stop autoboot('CTRL+C'): 0
- Unknown command 'boot_android' - try 'help'
- ## Booting FIT Image FIT: No fit blob
- FIT: No FIT image
- ## Booting Rockchip Format Image
- Could not find kernel partition, ret=-1
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:3...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- reading /extlinux/extlinux.conf
- 124 bytes read in 3 ms (40 KiB/s)
- 1: RK3566_PINETAB2 linux
- Retrieving file: /Image
- reading /Image
- 17604616 bytes read in 1461 ms (11.5 MiB/s)
- append: root=/dev/mmcblk0p4 rw rootwait
- Retrieving file: /rk3566-pinetab2-v2.0.dtb
- reading /rk3566-pinetab2-v2.0.dtb
- 60448 bytes read in 8 ms (7.2 MiB/s)
- Fdt Ramdisk skip relocation
- No misc partition
- ## Flattened Device Tree blob at 0x0a100000
- Booting using the fdt blob at 0x0a100000
- Using Device Tree in place at 000000000a100000, end 000000000a111c1f
- can't found rockchip,drm-logo, use rockchip,fb-logo
- WARNING: could not set reg FDT_ERR_BADOFFSET.
- failed to reserve fb-loader-logo memory
- Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
- Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
- == DO RELOCATE == Kernel from 0x00280000 to 0x00400000
- Total: 2101.946 ms
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
- [ 0.000000] Linux version 6.3.0-danctnix (danct12@melttower) (aarch64-buildroot-linux-musl-gcc.br_real (Buildroot 2023.02-96-g5f9ab2616c) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_DYNAMIC Thu May 25 14:52:11 +07 2023
- [ 0.000000] Machine model: Pine64 PineTab2 v2.0
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000001ffffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x1ff013fc0-0x1ff015fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
- [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
- [ 0.000000] cma: Reserved 256 MiB at 0x00000000e0000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 20 pages/cpu s44072 r8192 d29656 u81920
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Virtualization Host Extensions
- [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
- [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.000000] alternatives: applying boot alternatives
- [ 0.000000] Fallback order for Node 0: 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1999368
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rw rootwait
- [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: area num 4.
- [ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e0000000] (64MB)
- [ 0.000000] Memory: 7622348K/8124416K available (10688K kernel code, 1064K rwdata, 3472K rodata, 1856K init, 416K bss, 239924K reserved, 262144K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Dynamic Preempt: full
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 320 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: MBI range [296:319]
- [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: GICv3 features: 16 PPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.000000] clk: failed to reparent gpll to clk_rtc32k_frac: -22
- [ 0.000000] clk: failed to reparent gpll to clk_rtc32k_frac: -22
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000866] Console: colour dummy device 80x25
- [ 0.000883] printk: console [tty0] enabled
- [ 0.001649] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.001692] pid_max: default: 32768 minimum: 301
- [ 0.001934] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.002012] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.004777] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.004826] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.004997] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.005343] rcu: Hierarchical SRCU implementation.
- [ 0.005367] rcu: Max phase no-delay instances is 1000.
- [ 0.006513] smp: Bringing up secondary CPUs ...
- [ 0.007441] Detected VIPT I-cache on CPU1
- [ 0.007522] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
- [ 0.007576] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
- [ 0.008688] Detected VIPT I-cache on CPU2
- [ 0.008759] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
- [ 0.008801] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
- [ 0.009770] Detected VIPT I-cache on CPU3
- [ 0.009833] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
- [ 0.009870] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
- [ 0.010007] smp: Brought up 1 node, 4 CPUs
- [ 0.010142] SMP: Total of 4 processors activated.
- [ 0.010161] CPU features: detected: 32-bit EL0 Support
- [ 0.010179] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
- [ 0.010202] CPU features: detected: Common not Private translations
- [ 0.010219] CPU features: detected: CRC32 instructions
- [ 0.010238] CPU features: detected: RCpc load-acquire (LDAPR)
- [ 0.010254] CPU features: detected: LSE atomic instructions
- [ 0.010269] CPU features: detected: Privileged Access Never
- [ 0.010285] CPU features: detected: RAS Extension Support
- [ 0.010304] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
- [ 0.010430] CPU: All CPU(s) started at EL2
- [ 0.010453] alternatives: applying system-wide alternatives
- [ 0.016794] devtmpfs: initialized
- [ 0.030721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.030790] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.038341] pinctrl core: initialized pinctrl subsystem
- [ 0.039851] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.041275] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
- [ 0.041592] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.042113] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.042228] audit: initializing netlink subsys (disabled)
- [ 0.042496] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
- [ 0.043591] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.043676] cpuidle: using governor ladder
- [ 0.043749] cpuidle: using governor menu
- [ 0.043905] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.044090] ASID allocator initialised with 65536 entries
- [ 0.044257] Serial: AMBA PL011 UART driver
- [ 0.055635] platform fe060000.dsi: Fixed dependency cycle(s) with /dsi@fe060000/panel@0/ports/port@0/endpoint@0
- [ 0.055723] platform fe060000.dsi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@1/endpoint@4
- [ 0.056339] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@0/endpoint@2
- [ 0.073251] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.073796] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
- [ 0.074400] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.074762] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
- [ 0.075150] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.075499] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
- [ 0.075951] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.076291] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
- [ 0.076749] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.077090] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
- [ 0.080254] platform hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000/ports/port@1/endpoint
- [ 0.087514] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.087560] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
- [ 0.087583] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.087600] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
- [ 0.087619] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.087636] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
- [ 0.087655] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.087672] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
- [ 0.089021] cryptd: max_cpu_qlen set to 1000
- [ 0.092119] iommu: Default domain type: Translated
- [ 0.092158] iommu: DMA domain TLB invalidation policy: strict mode
- [ 0.092514] SCSI subsystem initialized
- [ 0.092683] usbcore: registered new interface driver usbfs
- [ 0.092746] usbcore: registered new interface driver hub
- [ 0.092813] usbcore: registered new device driver usb
- [ 0.093636] mc: Linux media interface: v0.10
- [ 0.093728] videodev: Linux video capture interface: v2.00
- [ 0.094132] EDAC MC: Ver: 3.0.0
- [ 0.095015] scmi_core: SCMI protocol bus registered
- [ 0.096839] clocksource: Switched to clocksource arch_sys_counter
- [ 0.097179] VFS: Disk quotas dquot_6.6.0
- [ 0.097246] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.110131] NET: Registered PF_INET protocol family
- [ 0.110926] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.118777] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
- [ 0.118892] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.118939] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.119539] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
- [ 0.121818] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.122028] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
- [ 0.122208] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
- [ 0.122634] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.124073] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
- [ 0.128671] Initialise system trusted keyrings
- [ 0.129128] workingset: timestamp_bits=44 max_order=21 bucket_order=0
- [ 0.183509] NET: Registered PF_ALG protocol family
- [ 0.183568] Key type asymmetric registered
- [ 0.183588] Asymmetric key parser 'x509' registered
- [ 0.183839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.183931] io scheduler mq-deadline registered
- [ 0.183955] io scheduler kyber registered
- [ 0.210485] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.210549] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.218256] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.218318] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.232029] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.236263] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 29, base_baud = 1500000) is a 16550A
- [ 0.238119] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 30, base_baud = 1500000) is a 16550A
- [ 0.238482] printk: console [ttyS2] enabled
- [ 0.340434] rockchip-vop2 fe040000.vop: Adding to iommu group 2
- [ 0.362371] loop: module loaded
- [ 0.363449] zram: Added device: zram0
- [ 0.369047] usbcore: registered new interface driver cdc_acm
- [ 0.369598] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.370376] usbcore: registered new interface driver usb-storage
- [ 0.371051] usbcore: registered new interface driver usbserial_generic
- [ 0.371714] usbserial: USB Serial support registered for generic
- [ 0.376765] i2c_dev: i2c /dev entries driver
- [ 0.379191] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
- [ 0.381469] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/regulators/BOOST
- [ 0.383450] rk808 0-0020: chip id: 0x8170
- [ 0.400336] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
- [ 0.401055] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
- [ 0.413654] vccio_acodec: Bringing 600000uV into 3300000-3300000uV
- [ 0.422265] vcc1v8_dvp: Bringing 600000uV into 1800000-1800000uV
- [ 0.425392] vcc2v8_dvp: Bringing 600000uV into 2800000-2800000uV
- [ 0.428520] boost: Bringing 4700000uV into 5000000-5000000uV
- [ 0.438576] rk808-rtc rk808-rtc.3.auto: registered as rtc0
- [ 0.440008] rk808-rtc rk808-rtc.3.auto: setting system clock to 2023-06-29T09:31:46 UTC (1688031106)
- [ 0.549409] Goodix-TS 1-005d: ID 911, version: 1060
- [ 0.550114] Goodix-TS 1-005d: Direct firmware load for goodix_911_cfg.bin failed with error -2
- [ 0.556122] input: Goodix Capacitive TouchScreen as /devices/platform/fe5a0000.i2c/i2c-1/1-005d/input/input0
- [ 0.576012] device-mapper: uevent: version 1.0.3
- [ 0.576797] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
- [ 0.580618] sdhci: Secure Digital Host Controller Interface driver
- [ 0.581256] sdhci: Copyright(c) Pierre Ossman
- [ 0.581657] Synopsys Designware Multimedia Card Interface Driver
- [ 0.582924] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.584946] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.586434] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
- [ 0.587558] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
- [ 0.588242] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
- [ 0.591293] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
- [ 0.592135] hid: raw HID events driver (C) Jiri Kosina
- [ 0.593049] usbcore: registered new interface driver usbhid
- [ 0.593583] usbhid: USB HID core driver
- [ 0.599228] Initializing XFRM netlink socket
- [ 0.599704] NET: Registered PF_PACKET protocol family
- [ 0.600413] Key type dns_resolver registered
- [ 0.630674] registered taskstats version 1
- [ 0.631433] Loading compiled-in X.509 certificates
- [ 0.642219] Key type .fscrypt registered
- [ 0.642623] Key type fscrypt-provisioning registered
- [ 0.680212] dw-mipi-dsi-rockchip fe060000.dsi: Failed to create device link (0x180) with vcc_3v3
- [ 0.682265] vcc3v3_sd enforce active low on GPIO handle
- [ 0.698963] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
- [ 0.700928] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
- [ 0.702827] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 0.704123] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
- [ 0.705446] rockchip-drm display-subsystem: bound fe060000.dsi (ops dw_mipi_dsi_rockchip_ops)
- [ 0.707447] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
- [ 0.708389] ------------[ cut here ]------------
- [ 0.708829] WARNING: CPU: 0 PID: 331 at drivers/gpu/drm/drm_mode_object.c:45 drm_mode_object_add+0x88/0x90
- [ 0.709726] Modules linked in:
- [ 0.710018] CPU: 0 PID: 331 Comm: kworker/u8:3 Not tainted 6.3.0-danctnix #1
- [ 0.710658] Hardware name: Pine64 PineTab2 v2.0 (DT)
- [ 0.711111] Workqueue: events_unbound deferred_probe_work_func
- [ 0.711656] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
- [ 0.712288] pc : drm_mode_object_add+0x88/0x90
- [ 0.712703] lr : drm_property_create+0xe0/0x1a4
- [ 0.713122] sp : ffff800009e5b5c0
- [ 0.713427] x29: ffff800009e5b5c0 x28: ffff800008cd9fb8 x27: ffff000101d51970
- [ 0.714083] x26: ffff000101d52190 x25: 0000000000001000 x24: 0000000000001000
- [ 0.714740] x23: ffff800008d1bf18 x22: 0000000000000004 x21: 00000000b0b0b0b0
- [ 0.715394] x20: ffff000101489790 x19: ffff000101d52000 x18: ffffffffffffffff
- [ 0.716050] x17: 206d657473797362 x16: 75732d79616c7073 x15: ffff000101489770
- [ 0.716703] x14: ffffffffffffffff x13: ffff000101489754 x12: ffff800008fc9ab8
- [ 0.717356] x11: 0000000000000001 x10: 0000000000000078 x9 : 0000000000000000
- [ 0.718010] x8 : ffff000101489900 x7 : 0000000000000000 x6 : 000000000000003f
- [ 0.718662] x5 : 0000000000000040 x4 : ffff800009e5b5d0 x3 : 0000000000000000
- [ 0.719315] x2 : 00000000b0b0b0b0 x1 : ffff000101489790 x0 : 0000000000000001
- [ 0.719970] Call trace:
- [ 0.720200] drm_mode_object_add+0x88/0x90
- [ 0.720585] drm_property_create+0xe0/0x1a4
- [ 0.720972] drm_property_create_enum+0x2c/0x94
- [ 0.721392] drm_connector_set_panel_orientation+0x98/0xb8
- [ 0.721898] boe_get_modes+0x6c/0xb4
- [ 0.722236] drm_panel_get_modes+0x24/0x40
- [ 0.722621] panel_bridge_connector_get_modes+0x18/0x24
- [ 0.723104] drm_helper_probe_single_connector_modes+0x188/0x514
- [ 0.723652] drm_client_modeset_probe+0x1e4/0x1144
- [ 0.724093] __drm_fb_helper_initial_config_and_unlock+0x48/0x48c
- [ 0.724652] drm_fb_helper_initial_config+0x38/0x48
- [ 0.725102] drm_fbdev_client_hotplug+0x84/0xcc
- [ 0.725521] drm_fbdev_generic_setup+0x8c/0x164
- [ 0.725939] rockchip_drm_bind+0x1e0/0x1fc
- [ 0.726325] try_to_bring_up_aggregate_device+0x168/0x1d4
- [ 0.726825] __component_add+0xa4/0x16c
- [ 0.727180] component_add+0x14/0x20
- [ 0.727513] dw_mipi_dsi_rockchip_host_attach+0x54/0x144
- [ 0.728003] dw_mipi_dsi_host_attach+0x94/0xc4
- [ 0.728414] mipi_dsi_attach+0x28/0x3c
- [ 0.728766] boe_dsi_probe+0xf4/0x198
- [ 0.729110] mipi_dsi_drv_probe+0x20/0x2c
- [ 0.729489] really_probe+0x148/0x2b8
- [ 0.729836] __driver_probe_device+0x78/0xe0
- [ 0.730235] driver_probe_device+0x3c/0x15c
- [ 0.730625] __device_attach_driver+0xb8/0x134
- [ 0.731039] bus_for_each_drv+0x80/0xdc
- [ 0.731398] __device_attach+0xa8/0x1b0
- [ 0.731759] device_initial_probe+0x14/0x20
- [ 0.732149] bus_probe_device+0xa8/0xac
- [ 0.732509] deferred_probe_work_func+0x88/0xc0
- [ 0.732931] process_one_work+0x1d0/0x320
- [ 0.733307] worker_thread+0x234/0x430
- [ 0.733655] kthread+0x10c/0x110
- [ 0.733964] ret_from_fork+0x10/0x20
- [ 0.734301] ---[ end trace 0000000000000000 ]---
- [ 0.734829] ------------[ cut here ]------------
- [ 0.735259] WARNING: CPU: 0 PID: 331 at drivers/gpu/drm/drm_mode_object.c:242 drm_object_attach_property+0x6c/0xb0
- [ 0.736204] Modules linked in:
- [ 0.736495] CPU: 0 PID: 331 Comm: kworker/u8:3 Tainted: G W 6.3.0-danctnix #1
- [ 0.737265] Hardware name: Pine64 PineTab2 v2.0 (DT)
- [ 0.737717] Workqueue: events_unbound deferred_probe_work_func
- [ 0.738260] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
- [ 0.738891] pc : drm_object_attach_property+0x6c/0xb0
- [ 0.739359] lr : drm_connector_set_panel_orientation+0x5c/0xb8
- [ 0.739893] sp : ffff800009e5b660
- [ 0.740197] x29: ffff800009e5b660 x28: ffff800008cd9fb8 x27: ffff000101d51970
- [ 0.740854] x26: ffff000101d52190 x25: 0000000000001000 x24: 0000000000001000
- [ 0.741509] x23: ffff000101d52000 x22: ffff000101cbf880 x21: ffff000101d52000
- [ 0.742164] x20: ffff800008b0f890 x19: ffff000101d51970 x18: ffffffffffffffff
- [ 0.742818] x17: 206d657473797362 x16: 75732d79616c7073 x15: ffff000101489770
- [ 0.743472] x14: ffffffffffffffff x13: ffff000101489754 x12: ffff800008fc9ab8
- [ 0.744125] x11: 0000000000000001 x10: 0000000000000078 x9 : ffff000101489aa0
- [ 0.744778] x8 : ffff000101489ab8 x7 : 00000000c0c0c0c0 x6 : 00000000c0c0c0c0
- [ 0.745430] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000006
- [ 0.746082] x2 : 0000000000000003 x1 : ffff000101489780 x0 : ffff000101d519b0
- [ 0.746738] Call trace:
- [ 0.746967] drm_object_attach_property+0x6c/0xb0
- [ 0.747405] boe_get_modes+0x6c/0xb4
- [ 0.747744] drm_panel_get_modes+0x24/0x40
- [ 0.748128] panel_bridge_connector_get_modes+0x18/0x24
- [ 0.748610] drm_helper_probe_single_connector_modes+0x188/0x514
- [ 0.749158] drm_client_modeset_probe+0x1e4/0x1144
- [ 0.749602] __drm_fb_helper_initial_config_and_unlock+0x48/0x48c
- [ 0.750160] drm_fb_helper_initial_config+0x38/0x48
- [ 0.750610] drm_fbdev_client_hotplug+0x84/0xcc
- [ 0.751029] drm_fbdev_generic_setup+0x8c/0x164
- [ 0.751448] rockchip_drm_bind+0x1e0/0x1fc
- [ 0.751835] try_to_bring_up_aggregate_device+0x168/0x1d4
- [ 0.752334] __component_add+0xa4/0x16c
- [ 0.752689] component_add+0x14/0x20
- [ 0.753022] dw_mipi_dsi_rockchip_host_attach+0x54/0x144
- [ 0.753510] dw_mipi_dsi_host_attach+0x94/0xc4
- [ 0.753923] mipi_dsi_attach+0x28/0x3c
- [ 0.754275] boe_dsi_probe+0xf4/0x198
- [ 0.754620] mipi_dsi_drv_probe+0x20/0x2c
- [ 0.754994] really_probe+0x148/0x2b8
- [ 0.755341] __driver_probe_device+0x78/0xe0
- [ 0.755739] driver_probe_device+0x3c/0x15c
- [ 0.756130] __device_attach_driver+0xb8/0x134
- [ 0.756545] bus_for_each_drv+0x80/0xdc
- [ 0.756903] __device_attach+0xa8/0x1b0
- [ 0.757264] device_initial_probe+0x14/0x20
- [ 0.757656] bus_probe_device+0xa8/0xac
- [ 0.758015] deferred_probe_work_func+0x88/0xc0
- [ 0.758436] process_one_work+0x1d0/0x320
- [ 0.758809] worker_thread+0x234/0x430
- [ 0.759158] kthread+0x10c/0x110
- [ 0.759467] ret_from_fork+0x10/0x20
- [ 0.759803] ---[ end trace 0000000000000000 ]---
- [ 1.510395] Console: switching to colour frame buffer device 160x50
- [ 1.546976] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
- [ 1.549054] panfrost fde60000.gpu: clock rate = 594000000
- [ 1.549712] panfrost fde60000.gpu: bus_clock rate = 500000000
- [ 1.556139] panfrost fde60000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
- [ 1.557286] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
- [ 1.558126] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
- [ 1.558992] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
- [ 1.560240] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
- [ 1.563334] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
- [ 1.573276] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
- [ 1.573973] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 1
- [ 1.574987] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 1.576069] xhci-hcd xhci-hcd.9.auto: irq 72, io mem 0xfd000000
- [ 1.576999] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
- [ 1.577609] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 2
- [ 1.578436] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
- [ 1.580154] hub 1-0:1.0: USB hub found
- [ 1.580645] hub 1-0:1.0: 1 port detected
- [ 1.581710] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.583474] hub 2-0:1.0: USB hub found
- [ 1.589307] hub 2-0:1.0: 1 port detected
- [ 1.597358] input: adc-keys as /devices/platform/adc-keys/input/input2
- [ 1.599269] ehci-platform fd800000.usb: EHCI Host Controller
- [ 1.599304] ohci-platform fd840000.usb: Generic Platform OHCI controller
- [ 1.599356] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
- [ 1.599595] ohci-platform fd840000.usb: irq 74, io mem 0xfd840000
- [ 1.614535] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
- [ 1.616029] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
- [ 1.617087] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 4
- [ 1.617378] ehci-platform fd800000.usb: irq 73, io mem 0xfd800000
- [ 1.622917] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
- [ 1.624817] input: gpio-keys as /devices/platform/gpio-keys/input/input3
- [ 1.628659] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
- [ 1.628686] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
- [ 1.629460] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
- [ 1.630028] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
- [ 1.630711] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 75,32 bit host data width,256 deep fifo
- [ 1.632922] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
- [ 1.637851] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
- [ 1.641630] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
- [ 1.644699] hub 4-0:1.0: USB hub found
- [ 1.648496] mmc_host mmc2: card is non-removable.
- [ 1.649049] hub 4-0:1.0: 1 port detected
- [ 1.653043] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
- [ 1.655362] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
- [ 1.728890] dw-apb-uart fe660000.serial: forbid DMA for kernel console
- [ 1.733752] hub 3-0:1.0: USB hub foun���[ 1.739435] hub 3-0:1.0: 1 port detected
- [ 1.753222] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
- [ 1.776334] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 238
- [ 1.782010] mmc0: new ultra high speed SDR104 SDHC card at address 5048
- [ 1.788770] mmcblk0: mmc0:5048 SD32G 29.7 GiB
- [ 1.800605] GPT:Primary header thinks Alt. header is not at the end of the disk.
- [ 1.806214] GPT:12951591 != 62357503
- [ 1.812051] GPT:Alternate GPT header not at the end of the disk.
- [ 1.814171] mmc1: new HS200 MMC card at address 0001
- [ 1.817327] GPT:12951591 != 62357503
- [ 1.818830] mmcblk1: mmc1:0001 SPeMMC 116 GiB
- [ 1.822968] GPT: Use GNU Parted to correct GPT errors.
- [ 1.823025] mmcblk0: p1 p2 p3 p4
- [ 1.829397] mmcblk1: p1 p2
- [ 1.850131] mmcblk1boot0: mmc1:0001 SPeMMC 4.00 MiB
- [ 1.856610] mmcblk1boot1: mmc1:0001 SPeMMC 4.00 MiB
- [ 1.863481] mmcblk1rpmb: mmc1:0001 SPeMMC 4.00 MiB, chardev (245:0)
- [ 1.864953] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
- [ 1.905020] EXT4-fs (mmcblk0p4): recovery complete
- [ 1.911105] EXT4-fs (mmcblk0p4): mounted filesystem 8cd2fa00-e0ec-4f86-a545-20d0c5f04cff with ordered data mode. Quota mode: none.
- [ 1.916532] VFS: Mounted root (ext4 filesystem) on device 179:4.
- [ 1.922384] devtmpfs: mounted
- [ 1.927729] Freeing unused kernel memory: 1856K
- [ 1.940926] Run /sbin/init as init process
- [ 1.983468] EXT4-fs (mmcblk0p4): re-mounted 8cd2fa00-e0ec-4f86-a545-20d0c5f04cff. Quota mode: none.
- Starting syslogd: OK
- Starting klogd: OK
- Running sysctl: OK
- Seeding 256 bits without crediting
- Saving 256 bits of non-creditable seed for next boot
- Starting network: OK
- [ 2.120931] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
- [ 2.240875] usb 3-1: new full-speed USB device number 2 using ohci-platform
- [ 2.476500] input: HID 1018:1006 as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.0/0003:1018:1006.0001/input/input4
- [ 2.538675] hid-generic 0003:1018:1006.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 1018:1006] on usb-fd840000.usb-1/input0
- [ 2.566903] input: HID 1018:1006 Mouse as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:1018:1006.0002/input/input5
- [ 2.570497] input: HID 1018:1006 Touchpad as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:1018:1006.0002/input/input6
- [ 2.572736] input: HID 1018:1006 System Control as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:1018:1006.0002/input/input7
- [ 2.633994] input: HID 1018:1006 Consumer Control as /devices/platform/fd840000.usb/usb3/3-1/3-1:1.1/0003:1018:1006.0002/input/input8
- [ 2.637868] hid-generic 0003:1018:1006.0002: input,hidraw1: USB HID v1.11 Mouse [HID 1018:1006] on usb-fd840000.usb-1/input1
- [ 68.269627] random: crng init done
Add Comment
Please, Sign In to add comment