Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@work-desktop pavel]# smartctl -a /dev/sdb
- smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.14-200.fc22.x86_64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 3.5" HDD MK.002TSKB
- Device Model: TOSHIBA MK2002TSKB
- Serial Number: 92O3KHK6F
- LU WWN Device Id: 5 000039 44b804872
- Firmware Version: MT4A
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s (current: 1.5 Gb/s)
- Local Time is: Mon Mar 27 10:20:58 2017 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 368) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 11907
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 52
- 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 025 024 000 Old_age Always - 30228
- 10 Spin_Retry_Count 0x0033 101 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 41
- 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1038
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 42 (Min/Max 19/50)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 1
- 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 23
- 222 Loaded_Hours 0x0032 023 023 000 Old_age Always - 31191
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
- 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 106
- 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 2
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2 occurred at disk power-on lifetime: 23449 hours (977 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 c8 40 d8 b5 40 Error: ICRC, ABRT at LBA = 0x00b5d840 = 11917376
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 c8 80 d4 b5 40 00 2d+22:09:24.533 WRITE FPDMA QUEUED
- 61 00 c0 80 d0 b5 40 00 2d+22:09:24.529 WRITE FPDMA QUEUED
- 61 00 b8 80 cf b5 40 00 2d+22:09:24.527 WRITE FPDMA QUEUED
- 61 00 b0 80 ca b5 40 00 2d+22:09:24.525 WRITE FPDMA QUEUED
- 61 80 a8 00 ca b5 40 00 2d+22:09:24.523 WRITE FPDMA QUEUED
- Error 1 occurred at disk power-on lifetime: 23449 hours (977 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 41 c8 40 d8 b5 40 Error: ICRC, ABRT at LBA = 0x00b5d840 = 11917376
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 c8 80 d4 b5 40 00 2d+22:09:24.533 WRITE FPDMA QUEUED
- 61 00 c0 80 d0 b5 40 00 2d+22:09:24.529 WRITE FPDMA QUEUED
- 61 00 b8 80 cf b5 40 00 2d+22:09:24.527 WRITE FPDMA QUEUED
- 61 00 b0 80 ca b5 40 00 2d+22:09:24.525 WRITE FPDMA QUEUED
- 61 80 a8 00 ca b5 40 00 2d+22:09:24.523 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 30166 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
