API tools faq
paste
Advertisement
Guest User

dmesg

a guest
Jul 19th, 2021
55
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.11 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:/# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 5.4.132 (tom@OpenWRTDev) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r17121-9d2dcc8312)) #0 SMP Mon Jul 19 12:51:22 2021
  4. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Meraki MR32
  7. [ 0.000000] earlycon: ns16550 at MMIO 0x18000300 (options '115200n8')
  8. [ 0.000000] printk: bootconsole [ns16550] enabled
  9. [ 0.000000] Memory policy: Data cache writealloc
  10. [ 0.000000] On node 0 totalpages: 32768
  11. [ 0.000000] Normal zone: 288 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  14. [ 0.000000] percpu: Embedded 14 pages/cpu s26700 r8192 d22452 u57344
  15. [ 0.000000] pcpu-alloc: s26700 r8192 d22452 u57344 alloc=14*4096
  16. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  17. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
  18. [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlycon
  19. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  20. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  21. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  22. [ 0.000000] Memory: 120992K/131072K available (4977K kernel code, 150K rwdata, 1248K rodata, 1024K init, 282K bss, 10080K reserved, 0K cma-reserved, 0K highmem)
  23. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  24. [ 0.000000] rcu: Hierarchical RCU implementation.
  25. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  26. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  27. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
  28. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  29. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  30. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  31. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  32. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  33. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
  34. [ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x4a0 with crng_init=0
  35. [ 0.000010] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 4398046511103ns
  36. [ 0.016637] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
  37. [ 0.027936] Switching to timer-based delay loop, resolution 2ns
  38. [ 0.034180] Calibrating delay loop (skipped), value calculated using timer frequency.. 1000.00 BogoMIPS (lpj=5000000)
  39. [ 0.045026] pid_max: default: 32768 minimum: 301
  40. [ 0.049872] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  41. [ 0.057344] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  42. [ 0.065954] CPU: Testing write buffer coherency: ok
  43. [ 0.070946] CPU0: Spectre v2: using BPIALL workaround
  44. [ 0.076420] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  45. [ 0.082696] Setting up static identity map for 0x100000 - 0x10003c
  46. [ 0.089200] rcu: Hierarchical SRCU implementation.
  47. [ 0.094407] smp: Bringing up secondary CPUs ...
  48. [ 0.099705] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  49. [ 0.099713] CPU1: Spectre v2: using BPIALL workaround
  50. [ 0.110766] smp: Brought up 1 node, 2 CPUs
  51. [ 0.114963] SMP: Total of 2 processors activated (2000.00 BogoMIPS).
  52. [ 0.121470] CPU: All CPU(s) started in SVC mode.
  53. [ 0.128373] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  54. [ 0.138460] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  55. [ 0.145539] pinctrl core: initialized pinctrl subsystem
  56. [ 0.151275] NET: Registered protocol family 16
  57. [ 0.156443] DMA: preallocated 256 KiB pool for atomic coherent allocations
  58. [ 0.177143] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  59. [ 0.188327] clocksource: Switched to clocksource arm_global_timer
  60. [ 0.195169] thermal_sys: Registered thermal governor 'step_wise'
  61. [ 0.195517] NET: Registered protocol family 2
  62. [ 0.206308] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  63. [ 0.214136] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  64. [ 0.222728] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  65. [ 0.230571] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  66. [ 0.237785] TCP: Hash tables configured (established 1024 bind 1024)
  67. [ 0.244376] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  68. [ 0.251100] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  69. [ 0.258423] NET: Registered protocol family 1
  70. [ 0.262925] PCI: CLS 0 bytes, default 64
  71. [ 0.268170] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  72. [ 0.278515] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  73. [ 0.284516] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  74. [ 0.298246] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  75. [ 0.305389] printk: console [ttyS0] disabled
  76. [ 0.309820] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 3906250) is a 16550
  77. [ 0.318849] printk: console [ttyS0] enabled
  78. [ 0.327314] printk: bootconsole [ns16550] disabled
  79. [ 0.337480] 18008000.serial: ttyS1 at MMIO 0x18008000 (irq = 22, base_baud = 7812500) is a 16550A
  80. [ 0.347000] bcm2835-rng 18004000.rng: hwrng registered
  81. [ 0.353264] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
  82. [ 0.359692] nand: AMD/Spansion S34ML01G2
  83. [ 0.363627] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  84. [ 0.371246] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
  85. [ 0.381202] Scanning device for bad blocks
  86. [ 0.404513] random: fast init done
  87. [ 0.749610] random: crng init done
  88. [ 1.319741] 5 fixed-partitions partitions found on MTD device brcmnand.0
  89. [ 1.326488] Creating 5 MTD partitions on "brcmnand.0":
  90. [ 1.331646] 0x000000000000-0x000000100000 : "u-boot"
  91. [ 1.337254] 0x000000100000-0x000000400000 : "bootkernel1"
  92. [ 1.343455] 0x000000400000-0x000000500000 : "nvram"
  93. [ 1.349185] 0x000000500000-0x000000800000 : "bootkernel2"
  94. [ 1.355423] 0x000000800000-0x000007f80000 : "ubi"
  95. [ 1.361666] bcm_iproc 18029200.spi: using bspi-mspi mode
  96. [ 1.368312] libphy: iProc MDIO bus: probed
  97. [ 1.372439] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus at 0x7f392a96
  98. [ 1.379776] libphy: mdio_mux: probed
  99. [ 1.384017] libphy: Fixed MDIO Bus: probed
  100. [ 1.388255] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  101. [ 1.394428] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00 and package 0x00
  102. [ 1.403389] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
  103. [ 1.414013] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  104. [ 1.414043] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
  105. [ 1.424828] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  106. [ 1.424839] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
  107. [ 1.434873] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  108. [ 1.445335] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  109. [ 1.455803] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  110. [ 1.466271] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  111. [ 1.476657] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  112. [ 1.487231] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  113. [ 1.497812] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  114. [ 1.508416] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  115. [ 1.508426] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
  116. [ 1.520517] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
  117. [ 1.530951] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
  118. [ 1.541375] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  119. [ 1.541386] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
  120. [ 1.551634] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  121. [ 1.551645] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
  122. [ 1.561721] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  123. [ 1.561730] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
  124. [ 1.573106] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  125. [ 1.573116] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
  126. [ 1.585885] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  127. [ 1.585894] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
  128. [ 1.596006] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
  129. [ 1.607651] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  130. [ 1.607661] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
  131. [ 1.619106] bcma-host-soc 18000000.axi: bus0: Flash type not supported
  132. [ 1.633527] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 0 provided by platform.
  133. [ 1.633850] bgmac_bcma bcma0:3: Found PHY addr: 0
  134. [ 1.638631] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
  135. [ 1.644931] bgmac_bcma bcma0:3: Using random MAC: 2a:94:90:a8:6e:9c
  136. [ 1.658576] b53_common: found switch: BCM53012, rev 5
  137. [ 1.664474] bgmac_bcma bcma0:4: Found PHY addr: 0
  138. [ 1.669207] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
  139. [ 1.675513] bgmac_bcma bcma0:4: Using random MAC: 46:9d:f3:d1:c5:ea
  140. [ 1.683243] bgmac_bcma bcma0:5: Found PHY addr: 30 (NOREGS)
  141. [ 1.690363] bgmac_bcma bcma0:6: Unsupported core_unit 3
  142. [ 1.695692] bgmac_bcma: probe of bcma0:6 failed with error -524
  143. [ 1.814049] pcie_iproc_bcma bcma0:7: PHY or data link is INACTIVE!
  144. [ 1.820251] pcie_iproc_bcma bcma0:7: no PCIe EP device detected
  145. [ 1.826203] pcie_iproc_bcma bcma0:7: PCIe controller setup failed
  146. [ 1.944043] pcie_iproc_bcma bcma0:8: PHY or data link is INACTIVE!
  147. [ 1.950245] pcie_iproc_bcma bcma0:8: no PCIe EP device detected
  148. [ 1.956196] pcie_iproc_bcma bcma0:8: PCIe controller setup failed
  149. [ 2.074045] pcie_iproc_bcma bcma0:9: link: UP
  150. [ 2.078496] pcie_iproc_bcma bcma0:9: PCI host bridge to bus 0000:00
  151. [ 2.084808] pci_bus 0000:00: root bus resource [mem 0x48000000-0x4fffffff]
  152. [ 2.091703] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  153. [ 2.099671] pci 0000:00:00.0: [14e4:8012] type 01 class 0x060400
  154. [ 2.105713] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  155. [ 2.115398] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  156. [ 2.125100] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  157. [ 2.134879] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  158. [ 2.144660] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  159. [ 2.154463] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  160. [ 2.160571] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
  161. [ 2.171202] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  162. [ 2.181002] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  163. [ 2.190689] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
  164. [ 2.200372] PCI: bus0: Fast back to back transfers disabled
  165. [ 2.205971] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  166. [ 2.215857] pci 0000:01:00.0: [14e4:a8dc] type 00 class 0x028000
  167. [ 2.221919] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  168. [ 2.228774] pci 0000:01:00.0: enabling Extended Tags
  169. [ 2.233838] pci 0000:01:00.0: supports D1 D2
  170. [ 2.238951] PCI: bus1: Fast back to back transfers disabled
  171. [ 2.244572] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  172. [ 2.251222] pci 0000:00:00.0: BAR 8: assigned [mem 0x48000000-0x480fffff]
  173. [ 2.258047] pci 0000:01:00.0: BAR 0: assigned [mem 0x48000000-0x48003fff 64bit]
  174. [ 2.265395] pci 0000:00:00.0: PCI bridge to [bus 01]
  175. [ 2.270372] pci 0000:00:00.0: bridge window [mem 0x48000000-0x480fffff]
  176. [ 2.278199] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
  177. [ 2.287253] bcma-host-soc 18000000.axi: bus0: Bus registered
  178. [ 2.293259] pci 0000:00:00.0: enabling device (0140 -> 0142)
  179. [ 2.298974] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
  180. [ 2.305740] bcma-pci-bridge 0000:01:00.0: bus1: Found chip with id 43428, rev 0x00 and package 0x08
  181. [ 2.314855] bcma-pci-bridge 0000:01:00.0: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
  182. [ 2.325524] bcma-pci-bridge 0000:01:00.0: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
  183. [ 2.336285] bcma-pci-bridge 0000:01:00.0: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
  184. [ 2.346428] bcma-pci-bridge 0000:01:00.0: bus1: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
  185. [ 2.357238] bcma-pci-bridge 0000:01:00.0: bus1: Found rev 10 PMU (capabilities 0x108C260A)
  186. [ 2.366868] bcma-pci-bridge 0000:01:00.0: bus1: Using SPROM revision 11 provided by platform.
  187. [ 2.366885] bcma-pci-bridge 0000:01:00.0: bus1: PMU resource config unknown or not needed for device 0xA9A4
  188. [ 2.374059] bcma-pci-bridge 0000:01:00.0: bus1: Workarounds unknown or not needed for device 0xA9A4
  189. [ 2.414319] bcma-pci-bridge 0000:01:00.0: bus1: Bus registered
  190. [ 2.421024] NET: Registered protocol family 10
  191. [ 2.426620] Segment Routing with IPv6
  192. [ 2.430355] NET: Registered protocol family 17
  193. [ 2.434891] 8021q: 802.1Q VLAN Support v1.8
  194. [ 2.439133] Registering SWP/SWPB emulation handler
  195. [ 2.447519] UBI: auto-attach mtd4
  196. [ 2.450852] ubi0: attaching mtd4
  197. [ 3.090140] ubi0: scanning is finished
  198. [ 3.103500] ubi0: attached mtd4 (name "ubi", size 119 MiB)
  199. [ 3.109058] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  200. [ 3.115963] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  201. [ 3.122768] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  202. [ 3.129757] ubi0: good PEBs: 956, bad PEBs: 0, corrupted PEBs: 0
  203. [ 3.135785] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  204. [ 3.143022] ubi0: max/mean erase counter: 234/166, WL threshold: 4096, image sequence number: 0
  205. [ 3.151751] ubi0: available PEBs: 0, total reserved PEBs: 956, PEBs reserved for bad PEB handling: 20
  206. [ 3.161036] ubi0: background thread "ubi_bgt0d" started, PID 473
  207. [ 3.168727] block ubiblock0_2: created from ubi0:2(rootfs)
  208. [ 3.174290] ubiblock: device ubiblock0_2 (rootfs) set to be root filesystem
  209. [ 3.185066] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
  210. [ 3.193099] Freeing unused kernel memory: 1024K
  211. [ 3.219856] Run /sbin/init as init process
  212. [ 3.521099] init: Console is alive
  213. [ 3.524699] init: - watchdog -
  214. [ 4.166173] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  215. [ 4.248349] usbcore: registered new interface driver usbfs
  216. [ 4.253927] usbcore: registered new interface driver hub
  217. [ 4.259355] usbcore: registered new device driver usb
  218. [ 4.271389] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  219. [ 4.279956] init: - preinit -
  220. [ 5.899800] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
  221. [ 5.907521] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  222. [ 5.914268] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  223. [ 10.131353] UBIFS (ubi0:5): Mounting in unauthenticated mode
  224. [ 10.137194] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 631
  225. [ 10.242367] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "rootfs_data"
  226. [ 10.250253] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  227. [ 10.260252] UBIFS (ubi0:5): FS size: 80756736 bytes (77 MiB, 636 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
  228. [ 10.270722] UBIFS (ubi0:5): reserved for root: 3814339 bytes (3724 KiB)
  229. [ 10.277360] UBIFS (ubi0:5): media format: w5/r0 (latest is w5/r0), UUID F73C96D7-3F54-4BF3-A065-FDEC144D8D3A, small LPT model
  230. [ 10.289915] mount_root: overlay filesystem has not been fully initialized yet
  231. [ 10.297512] mount_root: switching to ubifs overlay
  232. [ 10.575261] urandom-seed: Seed file not found (/etc/urandom.seed)
  233. [ 10.673930] procd: - early -
  234. [ 10.676897] procd: - watchdog -
  235. [ 11.209811] procd: - watchdog -
  236. [ 11.213243] procd: - ubus -
  237. [ 11.271788] procd: - init -
  238. [ 11.660097] kmodloader: loading kernel modules from /etc/modules.d/*
  239. [ 11.686840] urngd: v1.0.2 started.
  240. [ 11.762833] i2c /dev entries driver
  241. [ 11.769552] gpio-5 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file
  242. [ 11.778448] gpio-4 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
  243. [ 11.787667] i2c-gpio i2c: using lines 5 (SDA) and 4 (SCL)
  244. [ 11.806063] hidraw: raw HID events driver (C) Jiri Kosina
  245. [ 11.824423] Bluetooth: Core ver 2.22
  246. [ 11.828106] NET: Registered protocol family 31
  247. [ 11.832602] Bluetooth: HCI device and connection manager initialized
  248. [ 11.838982] Bluetooth: HCI socket layer initialized
  249. [ 11.843886] Bluetooth: L2CAP socket layer initialized
  250. [ 11.848967] Bluetooth: SCO socket layer initialized
  251. [ 11.854993] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  252. [ 11.860360] Bluetooth: BNEP filters: protocol multicast
  253. [ 11.865607] Bluetooth: BNEP socket layer initialized
  254. [ 11.874099] usbcore: registered new interface driver btusb
  255. [ 11.880408] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
  256. [ 11.888003] Backport generated by backports.git v5.10.42-1-0-gbee5c545
  257. [ 11.897043] Bluetooth: HCI UART driver ver 2.3
  258. [ 11.901539] Bluetooth: HCI UART protocol H4 registered
  259. [ 11.906687] Bluetooth: HCI UART protocol BCSP registered
  260. [ 11.913253] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  261. [ 11.919209] Bluetooth: HIDP socket layer initialized
  262. [ 11.933852] Bluetooth: RFCOMM TTY layer initialized
  263. [ 11.938777] Bluetooth: RFCOMM socket layer initialized
  264. [ 11.943980] Bluetooth: RFCOMM ver 1.11
  265. [ 11.954761] xt_time: kernel timezone is -0000
  266. [ 11.961464] at24 0-0050: 8192 byte 24c64 EEPROM, read-only, 0 bytes/write
  267. [ 11.987463] ina2xx 0-0045: power monitor ina219 (Rshunt = 60000 uOhm)
  268. [ 12.022899] PPP generic driver version 2.4.2
  269. [ 12.030831] NET: Registered protocol family 24
  270. [ 12.051394] b43-phy0: Broadcom 43428 WLAN found (core revision 30)
  271. [ 12.057624] bcma-pci-bridge 0000:01:00.0: bus1: Switched to core: 0x812
  272. [ 12.059868] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
  273. [ 12.066121] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
  274. [ 12.080107] Broadcom 43xx driver loaded [ Features: PNL ]
  275. [ 12.091666] Broadcom 43xx-legacy driver loaded [ Features: PLD ]
  276. [ 12.104319] usbcore: registered new interface driver brcmfmac
  277. [ 12.114493] kmodloader: done loading kernel modules from /etc/modules.d/*
  278. [ 12.235866] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  279. [ 17.455702] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
  280. [ 17.464249] br-lan: port 1(eth0) entered blocking state
  281. [ 17.469511] br-lan: port 1(eth0) entered disabled state
  282. [ 17.475188] device eth0 entered promiscuous mode
  283. [ 17.486055] br-lan: port 1(eth0) entered blocking state
  284. [ 17.491346] br-lan: port 1(eth0) entered forwarding state
  285. [ 17.510207] br-lan: port 2(eth0.1) entered blocking state
  286. [ 17.515722] br-lan: port 2(eth0.1) entered disabled state
  287. [ 17.521581] device eth0.1 entered promiscuous mode
  288. [ 17.526739] br-lan: port 2(eth0.1) entered blocking state
  289. [ 17.532170] br-lan: port 2(eth0.1) entered forwarding state
  290. [ 17.575854] br-lan: port 3(eth0.2) entered blocking state
  291. [ 17.581293] br-lan: port 3(eth0.2) entered disabled state
  292. [ 17.603119] device eth0.2 entered promiscuous mode
  293. [ 17.608177] br-lan: port 3(eth0.2) entered blocking state
  294. [ 17.613632] br-lan: port 3(eth0.2) entered forwarding state
  295. [ 17.633534] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
  296. [ 17.647159] br-lan: port 4(eth1) entered blocking state
  297. [ 17.652432] br-lan: port 4(eth1) entered disabled state
  298. [ 17.658474] device eth1 entered promiscuous mode
  299. [ 17.663864] br-lan: port 4(eth1) entered blocking state
  300. [ 17.669195] br-lan: port 4(eth1) entered forwarding state
  301. [ 17.682142] br-lan: port 5(eth2) entered blocking state
  302. [ 17.687503] br-lan: port 5(eth2) entered disabled state
  303. [ 17.693179] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
  304. [ 17.709077] device eth2 entered promiscuous mode
  305. [ 17.713986] br-lan: port 5(eth2) entered blocking state
  306. [ 17.719302] br-lan: port 5(eth2) entered forwarding state
  307. [ 18.524198] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  308. [ 18.864073] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  309. [ 19.066019] b43-phy0 ERROR: No 2GHz EPA gain table available for this device
  310. [ 19.094512] b43-phy0 ERROR: No 2GHz EPA gain table available for this device
  311. [ 19.427140] br-lan: port 6(wlan0) entered blocking state
  312. [ 19.432475] br-lan: port 6(wlan0) entered disabled state
  313. [ 19.438147] device wlan0 entered promiscuous mode
  314. [ 19.442991] br-lan: port 6(wlan0) entered blocking state
  315. [ 19.448360] br-lan: port 6(wlan0) entered forwarding state
  316. [ 19.535093] br-lan: port 6(wlan0) entered disabled state
  317. [ 30.964364] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  318. [ 30.970905] br-lan: port 6(wlan0) entered blocking state
  319. [ 30.976270] br-lan: port 6(wlan0) entered forwarding state
  320. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!