Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.9.82 (benpicco@volastation-01) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6339-9dfc809) ) #0 SMP Sat Mar 10 15:43:50 2018
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt:Machine model: TP-LINK Archer C1200 V1
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Hit pending asynchronous external abort (FSR=0x00000c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] free_area_init_node: node 0, pgdat c0a57c00, node_mem_map c7ef8000
- [ 0.000000] Normal zone: 256 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] percpu: Embedded 12 pages/cpu @c7ee6000 s17804 r8192 d23156 u49152
- [ 0.000000] pcpu-alloc: s17804 r8192 d23156 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk debug
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 118960K/131072K available (3463K kernel code, 105K rwdata, 904K rodata, 6080K init, 293K bss, 12112K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc036a0d0 (3465 kB)
- [ 0.000000] .init : 0xc044e000 - 0xc0a3e000 (6080 kB)
- [ 0.000000] .data : 0xc0a3e000 - 0xc0a58500 ( 106 kB)
- [ 0.000000] .bss : 0xc0a58500 - 0xc0aa1920 ( 294 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ18, assuming level low
- [ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
- [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 0.03MHz (virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x108b3bff2, max_idle_ns: 56421785880794 ns
- [ 0.000000] sched_clock: 56 bits at 35kHz, resolution 28550ns, wraps every 70368744167575ns
- [ 0.008565] Ignoring delay timer 0xc0a58778, which has insufficient resolution of 28550ns
- [ 0.017101] Calibrating delay loop... 1790.77 BogoMIPS (lpj=8953856)
- [ 0.079969] pid_max: default: 32768 minimum: 301
- [ 0.084851] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.091674] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.099583] CPU: Testing write buffer coherency: ok
- [ 0.105064] CPU0: update cpu_capacity 1024
- [ 0.109318] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.115228] Setting up static identity map for 0x82a0 - 0x82d4
- [ 0.122794] Brought up 1 CPUs
- [ 0.125992] SMP: Total of 1 processors activated (1790.77 BogoMIPS).
- [ 0.132530] CPU: All CPU(s) started in SVC mode.
- [ 0.139467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.149603] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.155969] pinctrl core: initialized pinctrl subsystem
- [ 0.162051] NET: Registered protocol family 16
- [ 0.166904] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.190772] clocksource: Switched to clocksource arch_sys_counter
- [ 0.198481] NET: Registered protocol family 2
- [ 0.203705] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.210957] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.217495] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.224119] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.230143] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.236852] NET: Registered protocol family 1
- [ 0.241477] PCI: CLS 0 bytes, default 64
- [ 0.366784] Crashlog allocated RAM at address 0x3f00000
- [ 0.373779] workingset: timestamp_bits=30 max_order=15 bucket_order=0
- [ 0.386255] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.392308] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.411779] io scheduler noop registered
- [ 0.415862] io scheduler deadline registered (default)
- [ 0.421943] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.431336] libphy: Fixed MDIO Bus: probed
- [ 0.435619] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
- [ 0.441757] bcma: bus0: Found chip with id 53573, rev 0x03 and package 0x01
- [ 0.449094] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x36, class 0x0)
- [ 0.458031] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x38, class 0x0)
- [ 0.467053] bcma: bus0: Core 2 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x05, class 0x0)
- [ 0.475932] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.481784] bcma: bus0: Core 3 found: ARM CA7 (manuf 0x4BF, id 0x847, rev 0x00, class 0x0)
- [ 0.490435] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x05, class 0x0)
- [ 0.499543] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x08, class 0x0)
- [ 0.508222] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.514075] bcma: bus0: Core 6 found: I2S (manuf 0x4BF, id 0x834, rev 0x06, class 0x0)
- [ 0.522297] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.528121] bcma: bus0: Core 7 found: CNDS DDR2/3 memory controller (manuf 0x4BF, id 0x846, rev 0x00, class 0x0)
- [ 0.538656] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.544509] bcma: bus0: Core 8 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
- [ 0.554416] bcma: bus0: Core 9 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x38, class 0x0)
- [ 0.563438] bcma: bus0: Core 10 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x08, class 0x0)
- [ 0.572203] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.578056] bcma: bus0: Core 11 found: I2S (manuf 0x4BF, id 0x834, rev 0x06, class 0x0)
- [ 0.586364] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.592188] bcma: bus0: Core 12 found: GCI (manuf 0x4BF, id 0x840, rev 0x08, class 0x0)
- [ 0.600496] bcma: bus0: bcma_of_get_irq() failed with rc=-22
- [ 0.606349] bcma: bus0: Core 13 found: PMU (manuf 0x4BF, id 0x827, rev 0x1C, class 0x0)
- [ 0.614600] bcma: bus0: Found rev 28 PMU (capabilities 0x507E351C)
- [ 0.620967] bcma: bus0: Found serial flash
- [ 0.625221] bcma: bus0: Found M25FL128 serial flash (size: 16384KiB, blocksize: 0x10000, blocks: 256)
- [ 0.635385] console [ttyS0] disabled
- [ 0.639182] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 20, base_baud = 2500000) is a 16550A
- [ 0.648346] console [ttyS0] enabled
- [ 0.655541] bootconsole [earlycon0] disabled
- [ 0.903328] 5 bcm47xxpart partitions found on MTD device bcm47xxsflash
- [ 0.909952] Creating 5 MTD partitions on "bcm47xxsflash":
- [ 0.915462] 0x000000000000-0x000000040000 : "boot"
- [ 0.928567] 0x000000040000-0x000000080000 : "boot"
- [ 0.935562] 0x000000080000-0x000000f00000 : "firmware"
- [ 0.943384] 1 trx partitions found on MTD device firmware
- [ 0.948866] Creating 1 MTD partitions on "firmware":
- [ 0.954062] 0x00000000001c-0x000000e80000 : "linux"
- [ 0.961257] 0x000000f00000-0x000000ff0000 : "tplink"
- [ 0.968309] 0x000000ff0000-0x000001000000 : "nvram"
- [ 1.003711] bcma: bus0: Using SPROM revision 11 provided by platform.
- [ 1.010278] bcma: bus0: PMU resource config unknown or not needed for device 0xD145
- [ 1.020042] bcma: bus0: Workarounds unknown or not needed for device 0xD145
- [ 1.140895] pcie_iproc_bcma bcma0:2: PCI host bridge to bus 0000:00
- [ 1.147290] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
- [ 1.154313] pcie_iproc_bcma bcma0:2: link: UP
- [ 1.158767] pci 0000:00:00.0: [14e4:d145] type 01 class 0x060400
- [ 1.164991] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 1.171472] PCI: bus0: Fast back to back transfers disabled
- [ 1.177125] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.185490] pci_bus 0000:01: busn_res: can not insert [bus 01-00] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0])
- [ 1.199166] pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000
- [ 1.205333] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
- [ 1.212385] pci 0000:01:00.0: supports D1 D2
- [ 1.216981] PCI: bus1: Fast back to back transfers disabled
- [ 1.222691] pci_bus 0000:01: busn_res: [bus 01-00] end is updated to 01
- [ 1.229429] pci_bus 0000:01: busn_res: can not insert [bus 01] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0])
- [ 1.242819] pci 0000:00:00.0: BAR 8: assigned [mem 0x10000000-0x100fffff]
- [ 1.249700] pci 0000:01:00.0: BAR 0: assigned [mem 0x10000000-0x10007fff 64bit]
- [ 1.257151] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.262233] pci 0000:00:00.0: bridge window [mem 0x10000000-0x100fffff]
- [ 1.269742] bgmac_bcma bcma0:5: Found PHY addr: 30 (NOREGS)
- [ 1.292582] libphy: bcma_mdio mii bus: probed
- [ 1.297036] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
- [ 1.304859] bgmac_bcma bcma0:5: Timeout waiting for reg 0x1E0
- [ 1.414948] b53_common: found switch: BCM53125, rev 4
- [ 1.421515] bgmac_bcma bcma0:10: Found PHY addr: 30 (NOREGS)
- [ 1.427282] bgmac_bcma bcma0:10: Support for Roboswitch not implemented
- [ 1.435105] bgmac_bcma bcma0:10: Timeout waiting for reg 0x1E0
- [ 1.459287] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
- [ 1.467110] bcma: bus0: Bus registered
- [ 1.471107] pci 0000:00:00.0: enabling device (0140 -> 0142)
- [ 1.476874] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
- [ 1.483783] bcma: bus1: Found chip with id 43217, rev 0x01 and package 0x09
- [ 1.491006] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
- [ 1.499714] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
- [ 1.508565] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
- [ 1.516787] bcma: bus1: Found rev 12 PMU (capabilities 0x108C260C)
- [ 1.543881] can not parse nvram name 0:ag2(null) with value 0xFF got -34
- [ 1.550733] can not parse nvram name 0:ag3(null) with value 0xFF got -34
- [ 1.583537] bcma: bus1: Using SPROM revision 8 provided by platform.
- [ 1.589990] bcma: bus1: PMU resource config unknown or not needed for device 0xA8D1
- [ 1.599783] bcma: bus1: Workarounds unknown or not needed for device 0xA8D1
- [ 1.641152] bcma: bus1: Bus registered
- [ 1.645891] NET: Registered protocol family 10
- [ 1.653257] NET: Registered protocol family 17
- [ 1.657854] 8021q: 802.1Q VLAN Support v1.8
- [ 1.662307] Registering SWP/SWPB emulation handler
- [ 1.682207] Freeing unused kernel memory: 6080K
- [ 1.686832] This architecture does not have kernel memory protection.
- [ 1.712584] init: Console is alive
- [ 1.716353] init: - watchdog -
- [ 1.746274] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 1.907325] usbcore: registered new interface driver usbfs
- [ 1.913150] usbcore: registered new interface driver hub
- [ 1.918688] usbcore: registered new device driver usb
- [ 1.929395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.937731] ehci-platform: EHCI generic platform driver
- [ 1.943413] ehci-platform 18004000.ehci: EHCI Host Controller
- [ 1.949294] ehci-platform 18004000.ehci: new USB bus registered, assigned bus number 1
- [ 1.957574] ehci-platform 18004000.ehci: irq 23, io mem 0x18004000
- [ 1.990835] ehci-platform 18004000.ehci: USB 2.0 started, EHCI 1.00
- [ 1.998372] hub 1-0:1.0: USB hub found
- [ 2.002769] hub 1-0:1.0: 2 ports detected
- [ 2.010449] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.018443] ohci-platform: OHCI generic platform driver
- [ 2.024096] ohci-platform 1800d000.ohci: Generic Platform OHCI controller
- [ 2.031119] ohci-platform 1800d000.ohci: new USB bus registered, assigned bus number 2
- [ 2.039313] ohci-platform 1800d000.ohci: irq 23, io mem 0x1800d000
- [ 2.116285] hub 2-0:1.0: USB hub found
- [ 2.120539] hub 2-0:1.0: 2 ports detected
- [ 2.130360] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 2.161108] init: - preinit -
- [ 2.317449] random: jshn: uninitialized urandom read (4 bytes read)
- [ 2.370553] random: jshn: uninitialized urandom read (4 bytes read)
- [ 2.481585] random: jshn: uninitialized urandom read (4 bytes read)
- [ 2.535573] random: jshn: uninitialized urandom read (4 bytes read)
- [ 2.597698] random: jshn: uninitialized urandom read (4 bytes read)
- [ 2.716924] random: procd: uninitialized urandom read (4 bytes read)
- [ 2.733969] bgmac_bcma bcma0:5: Timeout waiting for reg 0x1E0
- [ 2.740535] bcma: bus0: No bus clock specified for D145 device, pmu rev. 28, using default 80000000 Hz
- [ 2.750442] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 2.756523] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
- [ 3.790669] bgmac_bcma bcma0:5 eth0: Link is Up - 1Gbps/Full - flow control off
- [ 3.798178] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 3.804973] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 6.046593] bgmac_bcma bcma0:5: Timeout waiting for reg 0x1E0
- [ 6.101867] procd: - early -
- [ 6.104950] procd: - watchdog -
- [ 6.690829] procd: - watchdog -
- [ 6.711157] procd: - ubus -
- [ 6.723862] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.771398] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.778307] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.784959] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.792811] procd: - init -
- [ 7.096642] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 7.107091] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.125192] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
- [ 7.133415] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
- [ 7.143207] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.154656] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
- [ 7.207417] xt_time: kernel timezone is -0000
- [ 7.241335] PPP generic driver version 2.4.2
- [ 7.248244] NET: Registered protocol family 24
- [ 7.258293] b43-phy0: Broadcom 43217 WLAN found (core revision 30)
- [ 7.264746] bcma: bus1: Switched to core: 0x812
- [ 7.270884] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
- [ 7.277165] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 0
- [ 7.290955] Broadcom 43xx driver loaded [ Features: NL ]
- [ 7.300491] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 7.308627] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 16.291354] random: fast init done
- [ 19.966681] bgmac_bcma bcma0:5: Timeout waiting for reg 0x1E0
- [ 19.973362] bcma: bus0: No bus clock specified for D145 device, pmu rev. 28, using default 80000000 Hz
- [ 19.983098] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 20.041768] br-lan: port 1(eth0.1) entered blocking state
- [ 20.047250] br-lan: port 1(eth0.1) entered disabled state
- [ 20.053360] device eth0.1 entered promiscuous mode
- [ 20.058213] device eth0 entered promiscuous mode
- [ 20.146034] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 20.213469] bgmac_bcma bcma0:10: Timeout waiting for reg 0x1E0
- [ 20.219922] bcma: bus0: No bus clock specified for D145 device, pmu rev. 28, using default 80000000 Hz
- [ 20.229857] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 20.342631] IPv6: ADDRCONF(NETDEV_UP): eth1.2: link is not ready
- [ 20.991092] bgmac_bcma bcma0:5 eth0: Link is Up - 1Gbps/Full - flow control off
- [ 20.998572] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 21.050876] br-lan: port 1(eth0.1) entered blocking state
- [ 21.056358] br-lan: port 1(eth0.1) entered forwarding state
- [ 21.118483] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 21.310854] bgmac_bcma bcma0:10 eth1: Link is Up - 1Gbps/Full - flow control off
- [ 21.318420] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 21.371838] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.2: link becomes ready
- [ 278.577142] random: crng init done
- [ 300.767629] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
- [ 301.319077] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 384.312938] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
- [ 384.883800] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement