API tools faq
paste
denogginizer

SMART Extended Information

denogginizer
Jan 5th, 2026
166
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.31 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.57+deb12-amd64] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Ultrastar DC HC530
  6. Device Model: WDC WUH721414ALE604
  7. Serial Number: xxxxxxxxxx
  8. LU WWN Device Id: 5 000cca xxxxxxxx
  9. Firmware Version: LDGNW400
  10. User Capacity: 14,000,519,643,136 bytes [14.0 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database 7.3/6061
  15. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Mon Jan 5 15:56:47 2026 EST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is: Unavailable
  21. APM feature is: Disabled
  22. Rd look-ahead is: Enabled
  23. Write cache is: Enabled
  24. DSN feature is: Unavailable
  25. ATA Security is: Disabled, NOT FROZEN [SEC1]
  26. Wt Cache Reorder: Unknown
  27.  
  28. === START OF READ SMART DATA SECTION ===
  29. SMART Status not supported: Incomplete response, ATA output registers missing
  30. SMART overall-health self-assessment test result: PASSED
  31. Warning: This result is based on an Attribute check.
  32.  
  33. General SMART Values:
  34. Offline data collection status: (0x82) Offline data collection activity
  35. was completed without error.
  36. Auto Offline Data Collection: Enabled.
  37. Self-test execution status: ( 0) The previous self-test routine completed
  38. without error or no self-test has ever
  39. been run.
  40. Total time to complete Offline
  41. data collection: ( 101) seconds.
  42. Offline data collection
  43. capabilities: (0x5b) SMART execute Offline immediate.
  44. Auto Offline data collection on/off support.
  45. Suspend Offline collection upon new
  46. command.
  47. Offline surface scan supported.
  48. Self-test supported.
  49. No Conveyance Self-test supported.
  50. Selective Self-test supported.
  51. SMART capabilities: (0x0003) Saves SMART data before entering
  52. power-saving mode.
  53. Supports SMART auto save timer.
  54. Error logging capability: (0x01) Error logging supported.
  55. General Purpose Logging supported.
  56. Short self-test routine
  57. recommended polling time: ( 2) minutes.
  58. Extended self-test routine
  59. recommended polling time: (1390) minutes.
  60. SCT capabilities: (0x003d) SCT Status supported.
  61. SCT Error Recovery Control supported.
  62. SCT Feature Control supported.
  63. SCT Data Table supported.
  64.  
  65. SMART Attributes Data Structure revision number: 16
  66. Vendor Specific SMART Attributes with Thresholds:
  67. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  68. 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0
  69. 2 Throughput_Performance P-S--- 137 137 054 - 92
  70. 3 Spin_Up_Time POS--- 082 082 001 - 380 (Average 368)
  71. 4 Start_Stop_Count -O--C- 100 100 000 - 32
  72. 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 1
  73. 7 Seek_Error_Rate PO-R-- 100 100 001 - 0
  74. 8 Seek_Time_Performance P-S--- 128 128 020 - 18
  75. 9 Power_On_Hours -O--C- 099 099 000 - 7661
  76. 10 Spin_Retry_Count PO--C- 100 100 001 - 0
  77. 12 Power_Cycle_Count -O--CK 100 100 000 - 7
  78. 22 Helium_Level PO---K 100 100 025 - 100
  79. 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2545
  80. 193 Load_Cycle_Count -O--C- 100 100 000 - 2545
  81. 194 Temperature_Celsius -O---- 058 058 000 - 36 (Min/Max 21/44)
  82. 196 Reallocated_Event_Count -O--CK 100 100 000 - 1
  83. 197 Current_Pending_Sector -O---K 100 100 000 - 0
  84. 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
  85. 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
  86. ||||||_ K auto-keep
  87. |||||__ C event count
  88. ||||___ R error rate
  89. |||____ S speed/performance
  90. ||_____ O updated online
  91. |______ P prefailure warning
  92.  
  93. General Purpose Log Directory Version 1
  94. SMART Log Directory Version 1 [multi-sector log support]
  95. Address Access R/W Size Description
  96. 0x00 GPL,SL R/O 1 Log Directory
  97. 0x01 SL R/O 1 Summary SMART error log
  98. 0x02 SL R/O 1 Comprehensive SMART error log
  99. 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
  100. 0x04 GPL R/O 256 Device Statistics log
  101. 0x04 SL R/O 255 Device Statistics log
  102. 0x06 SL R/O 1 SMART self-test log
  103. 0x07 GPL R/O 1 Extended self-test log
  104. 0x08 GPL R/O 2 Power Conditions log
  105. 0x09 SL R/W 1 Selective self-test log
  106. 0x0c GPL R/O 5501 Pending Defects log
  107. 0x10 GPL R/O 1 NCQ Command Error log
  108. 0x11 GPL R/O 1 SATA Phy Event Counters log
  109. 0x12 GPL R/O 1 SATA NCQ Non-Data log
  110. 0x13 GPL R/O 1 SATA NCQ Send and Receive log
  111. 0x15 GPL R/W 1 Rebuild Assist log
  112. 0x21 GPL R/O 1 Write stream error log
  113. 0x22 GPL R/O 1 Read stream error log
  114. 0x24 GPL R/O 256 Current Device Internal Status Data log
  115. 0x25 GPL R/O 256 Saved Device Internal Status Data log
  116. 0x2f GPL - 1 Set Sector Configuration
  117. 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
  118. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  119. 0xe0 GPL,SL R/W 1 SCT Command/Status
  120. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  121.  
  122. SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
  123. No Errors Logged
  124.  
  125. SMART Extended Self-test Log Version: 1 (1 sectors)
  126. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  127.  
  128. SMART Selective self-test log data structure revision number 1
  129. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  130. 1 0 0 Not_testing
  131. 2 0 0 Not_testing
  132. 3 0 0 Not_testing
  133. 4 0 0 Not_testing
  134. 5 0 0 Not_testing
  135. Selective self-test flags (0x0):
  136. After scanning selected spans, do NOT read-scan remainder of disk.
  137. If Selective self-test is pending on power-up, resume after 0 minute delay.
  138.  
  139. SCT Status Version: 3
  140. SCT Version (vendor specific): 256 (0x0100)
  141. Device State: Active (0)
  142. Current Temperature: 36 Celsius
  143. Power Cycle Min/Max Temperature: 31/38 Celsius
  144. Lifetime Min/Max Temperature: 21/44 Celsius
  145. Under/Over Temperature Limit Count: 0/0
  146. SMART Status: 0xc24f (PASSED)
  147. Minimum supported ERC Time Limit: 65 (6.5 seconds)
  148.  
  149. SCT Temperature History Version: 2
  150. Temperature Sampling Period: 1 minute
  151. Temperature Logging Interval: 1 minute
  152. Min/Max recommended Temperature: 0/60 Celsius
  153. Min/Max Temperature Limit: -40/70 Celsius
  154. Temperature History Size (Index): 128 (1)
  155.  
  156. Index Estimated Time Temperature Celsius
  157. 2 2026-01-05 13:49 37 ******************
  158. 3 2026-01-05 13:50 37 ******************
  159. 4 2026-01-05 13:51 36 *****************
  160. 5 2026-01-05 13:52 36 *****************
  161. 6 2026-01-05 13:53 36 *****************
  162. 7 2026-01-05 13:54 37 ******************
  163. ... ..( 40 skipped). .. ******************
  164. 48 2026-01-05 14:35 37 ******************
  165. 49 2026-01-05 14:36 36 *****************
  166. ... ..( 14 skipped). .. *****************
  167. 64 2026-01-05 14:51 36 *****************
  168. 65 2026-01-05 14:52 37 ******************
  169. 66 2026-01-05 14:53 37 ******************
  170. 67 2026-01-05 14:54 36 *****************
  171. 68 2026-01-05 14:55 37 ******************
  172. ... ..( 27 skipped). .. ******************
  173. 96 2026-01-05 15:23 37 ******************
  174. 97 2026-01-05 15:24 36 *****************
  175. ... ..( 4 skipped). .. *****************
  176. 102 2026-01-05 15:29 36 *****************
  177. 103 2026-01-05 15:30 37 ******************
  178. ... ..( 10 skipped). .. ******************
  179. 114 2026-01-05 15:41 37 ******************
  180. 115 2026-01-05 15:42 36 *****************
  181. ... ..( 12 skipped). .. *****************
  182. 0 2026-01-05 15:55 36 *****************
  183. 1 2026-01-05 15:56 37 ******************
  184.  
  185. SMART WRITE LOG does not return COUNT and LBA_LOW register
  186. SCT (Get) Error Recovery Control command failed
  187.  
  188. Device Statistics (GP Log 0x04)
  189. Page Offset Size Value Flags Description
  190. 0x01 ===== = = === == General Statistics (rev 1) ==
  191. 0x01 0x008 4 7 --- Lifetime Power-On Resets
  192. 0x01 0x010 4 7661 --- Power-on Hours
  193. 0x01 0x018 6 163099103458 --- Logical Sectors Written
  194. 0x01 0x020 6 151112486 --- Number of Write Commands
  195. 0x01 0x028 6 183349841608 --- Logical Sectors Read
  196. 0x01 0x030 6 1383354375 --- Number of Read Commands
  197. 0x01 0x038 6 27581019700 --- Date and Time TimeStamp
  198. 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
  199. 0x03 0x008 4 3655 --- Spindle Motor Power-on Hours
  200. 0x03 0x010 4 3655 --- Head Flying Hours
  201. 0x03 0x018 4 2545 --- Head Load Events
  202. 0x03 0x020 4 1 --- Number of Reallocated Logical Sectors
  203. 0x03 0x028 4 106 --- Read Recovery Attempts
  204. 0x03 0x030 4 1 --- Number of Mechanical Start Failures
  205. 0x04 ===== = = === == General Errors Statistics (rev 1) ==
  206. 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
  207. 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
  208. 0x04 0x018 4 0 --- Physical Element Status Changed
  209. 0x05 ===== = = === == Temperature Statistics (rev 1) ==
  210. 0x05 0x008 1 36 --- Current Temperature
  211. 0x05 0x010 1 35 N-- Average Short Term Temperature
  212. 0x05 0x018 1 35 N-- Average Long Term Temperature
  213. 0x05 0x020 1 44 --- Highest Temperature
  214. 0x05 0x028 1 21 --- Lowest Temperature
  215. 0x05 0x030 1 42 N-- Highest Average Short Term Temperature
  216. 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
  217. 0x05 0x040 1 37 N-- Highest Average Long Term Temperature
  218. 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
  219. 0x05 0x050 4 0 --- Time in Over-Temperature
  220. 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
  221. 0x05 0x060 4 0 --- Time in Under-Temperature
  222. 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
  223. 0x06 ===== = = === == Transport Statistics (rev 1) ==
  224. 0x06 0x008 4 382 --- Number of Hardware Resets
  225. 0x06 0x010 4 225 --- Number of ASR Events
  226. 0x06 0x018 4 0 --- Number of Interface CRC Errors
  227. 0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
  228. |||_ C monitored condition met
  229. ||__ D supports DSN
  230. |___ N normalized value
  231.  
  232. Pending Defects log (GP Log 0x0c)
  233. No Defects Logged
  234.  
  235. SATA Phy Event Counters (GP Log 0x11)
  236. ID Size Value Description
  237. 0x0001 2 0 Command failed due to ICRC error
  238. 0x0002 2 0 R_ERR response for data FIS
  239. 0x0003 2 0 R_ERR response for device-to-host data FIS
  240. 0x0004 2 0 R_ERR response for host-to-device data FIS
  241. 0x0005 2 0 R_ERR response for non-data FIS
  242. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  243. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  244. 0x0008 2 0 Device-to-host non-data FIS retries
  245. 0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy
  246. 0x000a 2 19 Device-to-host register FISes sent due to a COMRESET
  247. 0x000b 2 0 CRC errors within host-to-device FIS
  248. 0x000d 2 0 Non-CRC errors within host-to-device FIS
  249.  
Tags: SMART Extended Information
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!