Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- NSA310>> bootm 0x800000
- ## Booting image at 00800000 ...
- Image Name: Linux-3.2.0
- Created: 2012-02-19 0:26:12 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2519392 Bytes = 2.4 MB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Linux version 3.2.0 (peter@Ubuntu) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #13 Sun Feb 19 01:26:10 CET 2012
- CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
- CPU: VIVT data cache, VIVT instruction cache
- Machine: Zyxel NSA-310
- Memory policy: ECC disabled, Data cache writeback
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
- Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xb00000,0x900000 ramdisk=32768
- PID hash table entries: 1024 (order: 0, 4096 bytes)
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 256MB = 256MB total
- Memory: 245544k/245544k available, 16600k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xd0800000 - 0xfe800000 ( 736 MB)
- lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc0487000 (4604 kB)
- .init : 0xc0487000 - 0xc04b1000 ( 168 kB)
- .data : 0xc04b2000 - 0xc04dbf80 ( 168 kB)
- .bss : 0xc04dbfa4 - 0xc04faf88 ( 124 kB)
- SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- NR_IRQS:114
- sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
- Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- devtmpfs: initialized
- NET: Registered protocol family 16
- Kirkwood: MV88F6281-A1, TCLK=200000000.
- Feroceon L2: Enabling L2
- Feroceon L2: Cache support initialised.
- Power resume enabled
- Power-off GPIO enabled
- Kirkwood PCIe port 0:
- link up
- PCI: bus0 uses PCIe port 0
- PCI: bus0: Fast back to back transfers disabled
- pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
- pci 0000:00:01.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
- pci 0000:00:01.0: BAR 4: set to [mem 0xe0010000-0xe0013fff 64bit pref] (PCI address [0xe0010000-0xe0013fff])
- pci 0000:00:01.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
- pci 0000:00:01.0: BAR 2: set to [mem 0xe0014000-0xe0014fff 64bit pref] (PCI address [0xe0014000-0xe0014fff])
- pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x10ff]
- pci 0000:00:01.0: BAR 0: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff])
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Advanced Linux Sound Architecture Driver Version 1.0.24.
- Switching to clocksource orion_clocksource
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 9216K
- NetWinder Floating Point Emulator V0.97 (double precision)
- NTFS driver 2.1.30 [Flags: R/W].
- msgmni has been set to 497
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler cfq registered (default)
- mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
- mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
- mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
- mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
- mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
- console [ttyS0] enabled
- brd: module loaded
- loop: module loaded
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- sata_mv sata_mv.0: slots 32 ports 2
- scsi0 : sata_mv
- scsi1 : sata_mv
- ata1: SATA max UDMA/133 irq 21
- ata2: SATA max UDMA/133 irq 21
- NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
- Scanning device for bad blocks
- modprobe: FATAL: Could not load /lib/modules/3.2.0/modules.dep: No such file or directory
- Creating 9 MTD partitions on "orion_nand":
- 0x000000000000-0x000000100000 : "uboot"
- 0x000000100000-0x000000180000 : "uboot_env"
- 0x000000180000-0x000000200000 : "key_store"
- 0x000000200000-0x000000280000 : "info"
- 0x000000280000-0x000000c80000 : "etc"
- 0x000000c80000-0x000001680000 : "kernel_1"
- 0x000001680000-0x000004640000 : "rootfs1"
- 0x000004640000-0x000005040000 : "kernel_2"
- 0x000005040000-0x000008000000 : "rootfs2"
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:00:01.0: eth0: RTL8168d/8111d at 0xd0806000, 00:00:00:00:00:30, XID 083000c0 IRQ 9
- r8169 0000:00:01.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- orion-ehci orion-ehci.0: Marvell Orion EHCI
- orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
- orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
- orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
- i2c /dev entries driver
- hwmon_vid: Unknown VRM version of your CPU
- lm85 0-002e: Starting monitoring
- Orion Watchdog Timer: Initial timeout 21 sec
- md: linear personality registered for level -1
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- cpuidle: using governor ladder
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- modprobe: FATAL: Could not load /lib/modules/3.2.0/modules.dep: No such file or directory
- usbcore: registered new interface driver snd-usb-audio
- ALSA device list:
- No soundcards found.
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (3980 buckets, 15920 max)
- ctnetlink v0.93: registering with nfnetlink.
- xt_time: kernel timezone is -0000
- ip_tables: (C) 2000-2006 Netfilter Core Team
- TCP cubic registered
- NET: Registered protocol family 10
- IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- L2TP core driver, V2.0
- 8021q: 802.1Q VLAN Support v1.8
- Registering the dns_resolver key type
- input: gpio-keys as /devices/platform/gpio-keys/input/input0
- rtc-mv rtc-mv: setting system clock to 2012-03-05 07:34:55 UTC (1330932895)
- usb 1-1: new high-speed USB device number 2 using orion-ehci
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
- ata1.00: ATA-8: TOSHIBA MK5059GSXP, GN001U, max UDMA/100
- ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5059GS GN00 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 0:0:0:0: [sda] 4096-byte physical blocks
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3
- sd 0:0:0:0: [sda] Attached SCSI disk
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- usb 1-1.2: new high-speed USB device number 3 using orion-ehci
- ata2: SATA link down (SStatus 0 SControl F300)
- Freeing init memory: 168K
- mount: mounting tmpfs on /dev failed: Invalid argument
- Kernel panic - not syncing: Attempted to kill init!
- USB power enabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement