API tools faq
paste
Guest User

Untitled

a guest
Sep 18th, 2024
37
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.26 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.30 20230417
  2. In
  3. channel 0
  4. CS = 0
  5. MR0=0x18
  6. MR4=0x2
  7. MR5=0x1
  8. MR8=0x10
  9. MR12=0x72
  10. MR14=0x72
  11. MR18=0x0
  12. MR19=0x0
  13. MR24=0x8
  14. MR25=0x0
  15. channel 1
  16. CS = 0
  17. MR0=0x0
  18. MR4=0x0
  19. MR5=0x0
  20. MR8=0x0
  21. MR12=0x0
  22. MR14=0x0
  23. MR18=0x0
  24. MR19=0x0
  25. MR24=0x0
  26. MR25=0x0
  27. channel 0 training pass!
  28. channel 1 training failed!
  29. change freq to 416MHz 0,1
  30. Channel 0: LPDDR4,416MHz
  31. Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
  32. no stride
  33. channel 0
  34. CS = 0
  35. MR0=0x18
  36. MR4=0x2
  37. MR5=0x1
  38. MR8=0x10
  39. MR12=0x72
  40. MR14=0x72
  41. MR18=0x0
  42. MR19=0x0
  43. MR24=0x8
  44. MR25=0x0
  45. channel 0 training pass!
  46. channel 0, cs 0, advanced training done
  47. change freq to 856MHz 1,0
  48. ch 0 ddrconfig = 0x101, ddrsize = 0x40
  49. pmugrf_os_reg[2] = 0x1000E2C1, stride = 0x17
  50. ddr_set_rate to 328MHZ
  51. ddr_set_rate to 666MHZ
  52. ddr_set_rate to 928MHZ
  53. channel 0, cs 0, advanced training done
  54. ddr_set_rate to 416MHZ, ctl_index 0
  55. ddr_set_rate to 856MHZ, ctl_index 1
  56. support 416 856 328 666 928 MHz, current 856MHz
  57. OUT
  58. Boot1 Release Time: May 26 2022 18:14:35, version: 1.30
  59. CPUId = 0x0
  60. ChipType = 0x10, 325
  61. mmc_set_bus_width: 1
  62. EmmcClk: 375KHZ
  63. mmc_switch index:183, value:0x2
  64. mmc_switch index:185, value:0x2
  65. EmmcClk: 375KHZ
  66. mmc_set_bus_width: 8
  67. EmmcClk: 200000KHZ
  68. SdmmcInit=2 0
  69. BootCapSize=100000
  70. UserCapSize=29820MB
  71. FwPartOffset=2000 , 100000
  72. NeedKHz=200KHz, Clock=12000KHz
  73. NeedKHz=200KHz, Clock=12000KHz
  74. NeedKHz=200KHz, Clock=12000KHz
  75. mmc0:cmd8,20
  76. mmc0:cmd5,20
  77. mmc0:cmd55,20
  78. mmc0:cmd1,20
  79. NeedKHz=200KHz, Clock=12000KHz
  80. NeedKHz=200KHz, Clock=12000KHz
  81. mmc0:cmd8,20
  82. mmc0:cmd5,20
  83. mmc0:cmd55,20
  84. mmc0:cmd1,20
  85. NeedKHz=200KHz, Clock=12000KHz
  86. NeedKHz=200KHz, Clock=12000KHz
  87. mmc0:cmd8,20
  88. mmc0:cmd5,20
  89. mmc0:cmd55,20
  90. mmc0:cmd1,20
  91. NeedKHz=200KHz, Clock=12000KHz
  92. SdmmcInit=0 1
  93. StorageInit ok = 78577
  94. SecureMode = 1
  95. SecureInit read PBA: 0x4
  96. SecureInit read PBA: 0x404
  97. atags_set_pub_key: ret:(0)
  98. SecureInit ret = 0, SecureMode = 1
  99. atags_set_bootdev: ret:(0)
  100. GPT part: 0, name: uboot, start:0x4000, size:0x2000
  101. GPT part: 1, name: trust, start:0x6000, size:0x2000
  102. GPT part: 2, name: misc, start:0x8000, size:0x2000
  103. GPT part: 3, name: boot, start:0xa000, size:0x40000
  104. GPT part: 4, name: recovery, start:0x4a000, size:0x10000
  105. GPT part: 5, name: backup, start:0x5a000, size:0x10000
  106. GPT part: 6, name: userdata, start:0x6a000, size:0x80000
  107. GPT part: 7, name: rootfs, start:0xea000, size:0x3953fdf
  108. find part:uboot OK. first_lba:0x4000.
  109. find part:trust OK. first_lba:0x6000.
  110. LoadTrust Addr:0x6000
  111. No find bl30.bin
  112. Load uboot, ReadLba = 4000
  113. Load OK, addr=0x200000, size=0x13beb0
  114. RunBL31 0x40000 @ 136381 us
  115. <SOH>NOTICE: BL31: v1.3(release):8f40012ab
  116. NOTICE: BL31: Built : 14:20:53, Feb 16 2023
  117. NOTICE: BL31: Rockchip release version: v1.1
  118. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  119. INFO: Using opteed sec cpu_context!
  120. INFO: boot cpu mask: 0
  121. INFO: plat_rockchip_pmu_init(1203): pd status 3e
  122. INFO: BL31: Initializing runtime services
  123. INFO: BL31: Initializing BL32
  124. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-286-g44e25f04e #hisping.lin #10 Fri Jul 28 06:18:14 UTC 2023 aarch64)<LF>
  125. <CR>INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2<LF>
  126. <CR>INF [0x0] TEE-CORE:init_teecore:83: teecore inits done<LF><CR>INFO: BL31: Preparing for EL3 exit to normal world
  127. INFO: Entry point address = 0x200000
  128. INFO: SPSR = 0x3c9
  129.  
  130.  
  131. U-Boot 2017.09-g260381e8bf1-230928-dirty #vicharak (Nov 28 2023 - 06:24:53 +0000)
  132.  
  133. Model: Vicharak RK3399 VAAMAN VO.3
  134. MPIDR: 0x80000000
  135. PreSerial: 2, raw, 0xff1a0000
  136. DRAM: 2 GiB
  137. Sysmem: init
  138. Relocation Offset: 7da22000
  139. Relocation fdt: 7bc14f18 - 7bc18cd3
  140. CR: M/C/I
  141. DM: v1
  142. dwmmc@fe320000: 0, sdhci@fe330000: 1
  143. Card did not respond to voltage select!
  144. mmc_init: -95, time 9 card not detected!
  145.  
  146. Device 0: unknown device
  147. Card did not respond to voltage select!
  148. mmc_init: -95, time 9 card not detected!
  149. switch to partitions #0, OK
  150. mmc1(part 0) is current device
  151. Booting from eMMC
  152. Bootdev(scan): mmc 1
  153. MMC1: HS400, 150Mhz
  154. PartType: EFI
  155. =================begin===================
  156. 102545 bytes read in 3 ms (32.6 MiB/s)
  157. DTB(Distro): rk3399-vaaman-linux.dtb
  158. boot mode: None
  159. Error binding driver 'gpio_led': -22
  160. Some drivers failed to bind
  161. I2c0 speed: 400000Hz
  162. PMIC: RK808
  163. vdd_center 900000 uV
  164. vdd_cpu_l 900000 uV
  165. vdd_log 1100000 uV
  166. io-domain: OK
  167. *** Warning - bad CRC, using default environment
  168.  
  169. Could not find baseparameter partition
  170. Model: Vicharak RK3399 VAAMAN VO.3 LINUX
  171. MPIDR: 0x80000000
  172. request gpio 124 failed
  173. No resource file: logo.bmp
  174. =================begin===================
  175. 512 bytes read in 2 ms (250 KiB/s)
  176. rockchip_read_distro_logo: Load logo.bmp from 1:4
  177. =================begin===================
  178. 188054 bytes read in 3 ms (59.8 MiB/s)
  179. rockchip_read_distro_logo: Load logo.bmp from 1:4
  180. Rockchip UBOOT DRM driver version: v1.0.1
  181. hdmi@ff940000 disconnected
  182. CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  183. CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  184. aplll 816000 KHz
  185. apllb 816000 KHz
  186. dpll 856000 KHz
  187. cpll 24000 KHz
  188. gpll 800000 KHz
  189. npll 600000 KHz
  190. vpll 24000 KHz
  191. aclk_perihp 133333 KHz
  192. hclk_perihp 66666 KHz
  193. pclk_perihp 33333 KHz
  194. aclk_perilp0 266666 KHz
  195. hclk_perilp0 88888 KHz
  196. pclk_perilp0 44444 KHz
  197. hclk_perilp1 100000 KHz
  198. pclk_perilp1 50000 KHz
  199. request gpio 124 failed
  200. Net: eth0: ethernet@fe300000
  201. Hit key to stop autoboot('CTRL+C'): 0
  202. ANDROID: reboot reason: "(none)"
  203. No valid android hdr
  204. Android image load failed
  205. Android boot failed, error -1.
  206. Unknown command 'boot_fit' - try 'help'
  207.  
  208. ## Booting Rockchip Format Image
  209. Could not find kernel partition, ret=-1
  210.  
  211. Device 0: unknown device
  212. Card did not respond to voltage select!
  213. mmc_init: -95, time 9 card not detected!
  214. switch to partitions #0, OK
  215. mmc1(part 0) is current device
  216. Scanning mmc 1:4...
  217. Found /extlinux/extlinux.conf
  218. Retrieving file: /extlinux/extlinux.conf
  219. =================begin===================
  220. 231 bytes read in 2 ms (112.3 KiB/s)
  221. U-Boot menu
  222. Enter choice: SCRIPT FAILED: continuing...
  223. starting USB...
  224. Bus dwc3@fe900000: usb maximum-speed not found
  225. probe failed, error -22
  226. Bus usb@fe380000: USB EHCI 1.00
  227. Bus usb@fe3a0000: USB OHCI 1.0
  228. Bus usb@fe3c0000: USB EHCI 1.00
  229. Bus usb@fe3e0000: USB OHCI 1.0
  230. Bus usb@fe800000: probe failed, error -2
  231. Bus usb@fe900000: probe failed, error -2
  232. scanning bus usb@fe380000 for devices... 1 USB Device(s) found
  233. scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
  234. scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
  235. scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
  236. scanning usb for storage devices... 0 Storage Device(s) found
  237.  
  238. Device 0: unknown device
  239. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  240. Could not initialize PHY ethernet@fe300000
  241. missing environment variable: pxeuuid
  242. Retrieving file: /extlinux/pxelinux.cfg/01-22-08-29-9a-58-3d
  243. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  244. Could not initialize PHY ethernet@fe300000
  245. Retrieving file: /extlinux/pxelinux.cfg/00000000
  246. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  247. Could not initialize PHY ethernet@fe300000
  248. Retrieving file: /extlinux/pxelinux.cfg/0000000
  249. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  250. Could not initialize PHY ethernet@fe300000
  251. Retrieving file: /extlinux/pxelinux.cfg/000000
  252. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  253. Could not initialize PHY ethernet@fe300000
  254. Retrieving file: /extlinux/pxelinux.cfg/00000
  255. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  256. Could not initialize PHY ethernet@fe300000
  257. Retrieving file: /extlinux/pxelinux.cfg/0000
  258. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  259. Could not initialize PHY ethernet@fe300000
  260. Retrieving file: /extlinux/pxelinux.cfg/000
  261. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  262. Could not initialize PHY ethernet@fe300000
  263. Retrieving file: /extlinux/pxelinux.cfg/00
  264. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  265. Could not initialize PHY ethernet@fe300000
  266. Retrieving file: /extlinux/pxelinux.cfg/0
  267. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  268. Could not initialize PHY ethernet@fe300000
  269. Retrieving file: /extlinux/pxelinux.cfg/default-arm-rockchip
  270. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  271. Could not initialize PHY ethernet@fe300000
  272. Retrieving file: /extlinux/pxelinux.cfg/default-arm
  273. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  274. Could not initialize PHY ethernet@fe300000
  275. Retrieving file: /extlinux/pxelinux.cfg/default
  276. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  277. Could not initialize PHY ethernet@fe300000
  278. Config file not found
  279. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  280. Could not initialize PHY ethernet@fe300000
  281. ethernet@fe300000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  282. Could not initialize PHY ethernet@fe300000
  283. vaaman:>
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!