API tools faq
paste
Advertisement
voltagex

Successful boot 1

voltagex
Feb 10th, 2019
114
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.43 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.14 20180803
  2. In
  3. soft reset
  4. SRX
  5. Channel 0: LPDDR4,50MHz
  6. CS = 0
  7. MR0=0x18
  8. MR4=0x1
  9. MR5=0x6
  10. MR8=0x8
  11. MR12=0x4D
  12. MR14=0x4D
  13. MR18=0x0
  14. MR19=0x0
  15. MR24=0x8
  16. MR25=0xFF
  17. CS = 1
  18. MR0=0x18
  19. MR4=0x1
  20. MR5=0x6
  21. MR8=0x8
  22. MR12=0x4D
  23. MR14=0x4D
  24. MR18=0x0
  25. MR19=0x0
  26. MR24=0x8
  27. MR25=0xFF
  28. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  29. Channel 1: LPDDR4,50MHz
  30. CS = 0
  31. MR0=0x18
  32. MR4=0x1
  33. MR5=0x6
  34. MR8=0x8
  35. MR12=0x4D
  36. MR14=0x4D
  37. MR18=0x0
  38. MR19=0x0
  39. MR24=0x8
  40. MR25=0xFF
  41. CS = 1
  42. MR0=0x18
  43. MR4=0x1
  44. MR5=0x6
  45. MR8=0x8
  46. MR12=0x4D
  47. MR14=0x4D
  48. MR18=0x0
  49. MR19=0x0
  50. MR24=0x8
  51. MR25=0xFF
  52. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  53. 256B stride
  54. channel 0
  55. CS = 0
  56. MR0=0x18
  57. MR4=0x1
  58. MR5=0x6
  59. MR8=0x8
  60. MR12=0x72
  61. MR14=0x72
  62. MR18=0x0
  63. MR19=0x0
  64. MR24=0x8
  65. MR25=0xFF
  66. CS = 1
  67. MR0=0x18
  68. MR4=0x1
  69. MR5=0x6
  70. MR8=0x8
  71. MR12=0x72
  72. MR14=0x72
  73. MR18=0x0
  74. MR19=0x0
  75. MR24=0x8
  76. MR25=0xFF
  77. channel 1
  78. CS = 0
  79. MR0=0x18
  80. MR4=0x1
  81. MR5=0x6
  82. MR8=0x8
  83. MR12=0x72
  84. MR14=0x72
  85. MR18=0x0
  86. MR19=0x0
  87. MR24=0x8
  88. MR25=0xFF
  89. CS = 1
  90. MR0=0x18
  91. MR4=0x1
  92. MR5=0x6
  93. MR8=0x8
  94. MR12=0x72
  95. MR14=0x72
  96. MR18=0x0
  97. MR19=0x0
  98. MR24=0x8
  99. MR25=0xFF
  100. channel 0 training pass!
  101. channel 1 training pass!
  102. change freq to 400MHz 0,1
  103. channel 0
  104. CS = 0
  105. MR0=0x18
  106. MR4=0x1
  107. MR5=0x6
  108. MR8=0x8
  109. MR12=0x72
  110. MR14=0x72
  111. MR18=0x0
  112. MR19=0x0
  113. MR24=0x8
  114. MR25=0xFF
  115. CS = 1
  116. MR0=0x18
  117. MR4=0x1
  118. MR5=0x6
  119. MR8=0x8
  120. MR12=0x72
  121. MR14=0x72
  122. MR18=0x0
  123. MR19=0x0
  124. MR24=0x8
  125. MR25=0xFF
  126. channel 1
  127. CS = 0
  128. MR0=0x18
  129. MR4=0x1
  130. MR5=0x6
  131. MR8=0x8
  132. MR12=0x72
  133. MR14=0x72
  134. MR18=0x0
  135. MR19=0x0
  136. MR24=0x8
  137. MR25=0xFF
  138. CS = 1
  139. MR0=0x18
  140. MR4=0x1
  141. MR5=0x6
  142. MR8=0x8
  143. MR12=0x72
  144. MR14=0x72
  145. MR18=0x0
  146. MR19=0x0
  147. MR24=0x8
  148. MR25=0xFF
  149. channel 0 training pass!
  150. channel 1 training pass!
  151. change freq to 800MHz 1,0
  152. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  153. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  154. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  155. OUT
  156. Boot1: 2018-08-06, version: 1.15
  157. CPUId = 0x0
  158. ChipType = 0x10, 277
  159. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  160. mmc: ERROR: Card did not respond to voltage select!
  161. emmc reinit
  162. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  163. mmc: ERROR: Card did not respond to voltage select!
  164. emmc reinit
  165. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  166. mmc: ERROR: Card did not respond to voltage select!
  167. SdmmcInit=2 1
  168. mmc0:cmd5,20
  169. SdmmcInit=0 0
  170. BootCapSize=0
  171. UserCapSize=7580MB
  172. FwPartOffset=2000 , 0
  173. StorageInit ok = 81463
  174. SecureMode = 0
  175. SecureInit read PBA: 0x4
  176. SecureInit read PBA: 0x404
  177. SecureInit read PBA: 0x804
  178. SecureInit read PBA: 0xc04
  179. SecureInit read PBA: 0x1004
  180. SecureInit read PBA: 0x1404
  181. SecureInit read PBA: 0x1804
  182. SecureInit read PBA: 0x1c04
  183. SecureInit ret = 0, SecureMode = 0
  184. GPT 0x3190d20 signature is wrong
  185. LoadTrust Addr:0x4000
  186. No find bl30.bin
  187. No find bl32.bin
  188. Load uboot, ReadLba = 2000
  189. Load OK, addr=0x200000, size=0xaee6c
  190. RunBL31 0x10000
  191. NOTICE: BL31: v1.3(debug):56eea3d
  192. NOTICE: BL31: Built : 15:27:37, Aug 8 2018
  193. NOTICE: BL31: Rockchip release version: v1.1
  194. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  195. INFO: Using opteed sec cpu_context!
  196. INFO: boot cpu mask: 0
  197. INFO: plat_rockchip_pmu_init(1151): pd status 3e
  198. INFO: BL31: Initializing runtime services
  199. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  200. ERROR: Error initializing runtime service opteed_fast
  201. INFO: BL31: Preparing for EL3 exit to normal world
  202. INFO: Entry point address = 0x200000
  203. INFO: SPSR = 0x3c9
  204.  
  205.  
  206. U-Boot 2017.09-02559-gc22527550f (Feb 10 2019 - 16:48:49 +1100)
  207.  
  208. Model: Firefly-RK3399 Board
  209. DRAM: 3.9 GiB
  210. Relocation Offset is: f7d10000
  211. Sysmem: init
  212. I2c speed: 400000Hz
  213. PMIC: RK808
  214. vdd_center 900000 uV
  215. vdd_cpu_l 900000 uV
  216. vdd-log init 950000 uV
  217. MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
  218. Card did not respond to voltage select!
  219. mmc_init: -95, time 27
  220. *** Warning - No block device, using default environment
  221.  
  222. In: serial@ff1a0000
  223. Out: serial@ff1a0000
  224. Err: serial@ff1a0000
  225. Model: Firefly-RK3399 Board
  226. RKPARM: Invalid parameter part table
  227. switch to partitions #0, OK
  228. mmc1 is current device
  229. do_rkimg_test found IDB in SDcard
  230. Boot from SDcard
  231. Bootdev: mmc 1
  232. RKPARM: Invalid parameter part table
  233. ## Unknown partition table type 0
  234. PartType: <NULL>
  235. RKPARM: Invalid parameter part table
  236. get part misc fail -1
  237. boot mode: normal
  238. CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  239. CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
  240. aplll 816000 KHz
  241. apllb 24000 KHz
  242. dpll 800000 KHz
  243. cpll 24000 KHz
  244. gpll 800000 KHz
  245. npll 600000 KHz
  246. vpll 24000 KHz
  247. aclk_perihp 133333 KHz
  248. hclk_perihp 66666 KHz
  249. pclk_perihp 33333 KHz
  250. aclk_perilp0 266666 KHz
  251. hclk_perilp0 88888 KHz
  252. pclk_perilp0 44444 KHz
  253. hclk_perilp1 100000 KHz
  254. pclk_perilp1 50000 KHz
  255. Net: eth0: ethernet@fe300000
  256. Hit key to stop autoboot('CTRL+C'): 0
  257. RKPARM: Invalid parameter part table
  258. android_bootloader_boot_flow Could not find misc partition
  259. ANDROID: reboot reason: "(none)"
  260. RKPARM: Invalid parameter part table
  261. load_android_image: Can't find part: boot
  262. Android boot failed, error -1.
  263. RKPARM: Invalid parameter part table
  264. =Booting Rockchip format image=
  265. RKPARM: Invalid parameter part table
  266. boot_rockchip_image kernel or boot part info error
  267. switch to partitions #0, OK
  268. mmc1 is current device
  269. RKPARM: Invalid parameter part table
  270. RKPARM: Invalid parameter part table
  271. RKPARM: Invalid parameter part table
  272. RKPARM: Invalid parameter part table
  273. RKPARM: Invalid parameter part table
  274. RKPARM: Invalid parameter part table
  275. RKPARM: Invalid parameter part table
  276. RKPARM: Invalid parameter part table
  277. RKPARM: Invalid parameter part table
  278. RKPARM: Invalid parameter part table
  279. RKPARM: Invalid parameter part table
  280. RKPARM: Invalid parameter part table
  281. RKPARM: Invalid parameter part table
  282. RKPARM: Invalid parameter part table
  283. RKPARM: Invalid parameter part table
  284. RKPARM: Invalid parameter part table
  285. RKPARM: Invalid parameter part table
  286. RKPARM: Invalid parameter part table
  287. RKPARM: Invalid parameter part table
  288. RKPARM: Invalid parameter part table
  289. RKPARM: Invalid parameter part table
  290. RKPARM: Invalid parameter part table
  291. RKPARM: Invalid parameter part table
  292. RKPARM: Invalid parameter part table
  293. RKPARM: Invalid parameter part table
  294. RKPARM: Invalid parameter part table
  295. RKPARM: Invalid parameter part table
  296. RKPARM: Invalid parameter part table
  297. RKPARM: Invalid parameter part table
  298. RKPARM: Invalid parameter part table
  299. RKPARM: Invalid parameter part table
  300. RKPARM: Invalid parameter part table
  301. RKPARM: Invalid parameter part table
  302. RKPARM: Invalid parameter part table
  303. RKPARM: Invalid parameter part table
  304. RKPARM: Invalid parameter part table
  305. RKPARM: Invalid parameter part table
  306. RKPARM: Invalid parameter part table
  307. RKPARM: Invalid parameter part table
  308. RKPARM: Invalid parameter part table
  309. RKPARM: Invalid parameter part table
  310. RKPARM: Invalid parameter part table
  311. RKPARM: Invalid parameter part table
  312. RKPARM: Invalid parameter part table
  313. RKPARM: Invalid parameter part table
  314. RKPARM: Invalid parameter part table
  315. RKPARM: Invalid parameter part table
  316. RKPARM: Invalid parameter part table
  317. RKPARM: Invalid parameter part table
  318. RKPARM: Invalid parameter part table
  319. RKPARM: Invalid parameter part table
  320. RKPARM: Invalid parameter part table
  321. RKPARM: Invalid parameter part table
  322. RKPARM: Invalid parameter part table
  323. RKPARM: Invalid parameter part table
  324. RKPARM: Invalid parameter part table
  325. RKPARM: Invalid parameter part table
  326. RKPARM: Invalid parameter part table
  327. RKPARM: Invalid parameter part table
  328. RKPARM: Invalid parameter part table
  329. RKPARM: Invalid parameter part table
  330. RKPARM: Invalid parameter part table
  331. RKPARM: Invalid parameter part table
  332. ** No partition table - mmc 1 **
  333. Card did not respond to voltage select!
  334. mmc_init: -95, time 18
  335. starting USB...
  336. USB0: USB EHCI 1.00
  337. USB1: USB EHCI 1.00
  338. scanning bus 0 for devices... 1 USB Device(s) found
  339. scanning bus 1 for devices... 1 USB Device(s) found
  340. scanning usb for storage devices... 0 Storage Device(s) found
  341.  
  342. Device 0: unknown device
  343. ethernet@fe300000 Waiting for PHY auto negotiation to complete. done
  344. Speed: 100, full duplex
  345. BOOTP broadcast 1
  346. BOOTP broadcast 2
  347. BOOTP broadcast 3
  348. DHCP client bound to address 10.1.1.241 (1376 ms)
  349. *** Warning: no boot file name; using '0A0101F1.img'
  350. Using ethernet@fe300000 device
  351. TFTP from server 0.0.0.0; our IP address is 10.1.1.241; sending through gateway 10.1.1.1
  352. Filename '0A0101F1.img'.
  353. Load address: 0x800800
  354. Loading: T
  355. Abort
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!