Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [START OF THE ROUTER]
- <break>
- Decompressing...done␍␊
- ␍␊
- ␍␊
- CFE version 6.30.39.16 (r331229) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)␍␊
- Build Date: <0xe5><0x9b><0x9b> 7<0xe6><0x9c><0x88> 11 14:46:11 CST 2013 (yau@wireless-pub2)␍␊
- Copyright (C) 2000-2008 Broadcom Corporation.␍␊
- ␍␊
- Init Arena␍␊
- Init Devs.␍␊
- Boot partition size = 262144(0x40000)␍␊
- Found an ST compatible serial flash with 32 64KB blocks; total size 2MB␍␊
- Found a Zentel NAND flash with 2048B pages or 128KB blocks; total size 128MB␍␊
- bcm_robo_enable_switch: EEE is disabled␍␊
- et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.16 (r331229)␍␊
- CPU type 0x19749: 600MHz␍␊
- Tot mem: 131072 KBytes␍␊
- ␍␊
- CFE mem: 0x80700000 - 0x8094F790 (2422672)␍␊
- Data: 0x80739390 - 0x8073C740 (13232)␍␊
- BSS: 0x8073C740 - 0x8074D790 (69712)␍␊
- Heap: 0x8074D790 - 0x8094D790 (2097152)␍␊
- Stack: 0x8094D790 - 0x8094F790 (8192)␍␊
- Text: 0x80700000 - 0x80739388 (234376)␍␊
- ␍␊
- Device eth0: hwaddr 08-62-66-8D-B7-D8, ipaddr 192.168.1.1, mask 255.255.255.0␍␊
- gateway not set, nameserver not set␍␊
- Null Rescue Flag.␍␊
- boot the image...␍␊
- go load␍␊
- Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)␍␊
- Loading: TFTP Server.␍␊
- Failed.␍␊
- Could not load :: Timeout occured␍␊
- Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)␍␊
- Loading: ...... 3396620 bytes read␍␊
- Entry at 0x80001000␍␊
- Closing network.␍␊
- Starting program at 0x80001000␍␊
- start_kernel␍␊
- Linux version 2.6.22.19 (root@asus) (gcc version 4.2.3) #1 Thu Jan 28 20:46:30 CST 2021␍␊
- CPU revision is: 00019749␍␊
- Found an ST compatible serial flash with 32 64KB blocks; total size 2MB␍␊
- Determined physical RAM map:␍␊
- memory: 07fff000 @ 00000000 (usable)␍␊
- memory: 08000000 @ 87fff000 (usable)␍␊
- Built 1 zonelists. Total pages: 585216␍␊
- Kernel command line: root=/dev/mtdblock3 console=ttyS0,115200 init=/sbin/preinit␍␊
- Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.␍␊
- Primary data cache 32kB, 4-way, linesize 32 bytes.␍␊
- Synthesized TLB refill handler (20 instructions).␍␊
- Synthesized TLB load handler fastpath (32 instructions).␍␊
- Synthesized TLB store handler fastpath (32 instructions).␍␊
- Synthesized TLB modify handler fastpath (31 instructions).␍␊
- PID hash table entries: 2048 (order: 11, 8192 bytes)␍␊
- CPU: BCM5300 rev 1 pkg 0 at 600 MHz␍␊
- Using 300.000 MHz high precision timer.␍␊
- console [ttyS0] enabled␍␊
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)␍␊
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)␍␊
- Memory: 238480k/131068k available (2592k kernel code, 22728k reserved, 524k data, 200k init, 131072k highmem)␍␊
- Invalid signature of oopsbuf: FF-FF-FF-FF-FF-FF-FF-FF (len 4294967295)␍␊
- Mount-cache hash table entries: 512␍␊
- NET: Registered protocol family 16␍␊
- PCI: Initializing host␍␊
- PCI: Reset RC␍␊
- PCI: Initializing host␍␊
- PCI: Reset RC␍␊
- PCI: Fixing up bus 0␍␊
- PCI/PCIe coreunit 0 is set to bus 1.␍␊
- PCI: Fixing up bridge␍␊
- PCI: Fixing up bridge␍␊
- PCI: Enabling device 0000:01:00.1 (0004 -> 0006)␍␊
- PCI: Fixing up bus 1␍␊
- PCI/PCIe coreunit 1 is set to bus 2.␍␊
- PCI: Fixing up bridge␍␊
- PCI: Fixing up bridge␍␊
- PCI: Enabling device 0000:02:00.1 (0004 -> 0006)␍␊
- PCI: Fixing up bus 2␍␊
- NET: Registered protocol family 2␍␊
- Time: MIPS clocksource has been installed.␍␊
- IP route cache hash table entries: 4096 (order: 2, 16384 bytes)␍␊
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)␍␊
- TCP bind hash table entries: 16384 (order: 4, 65536 bytes)␍␊
- TCP: Hash tables configured (established 16384 bind 16384)␍␊
- TCP reno registered␍␊
- highmem bounce pool size: 64 pages␍␊
- squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher␍␊
- io scheduler noop registered (default)␍␊
- HDLC line discipline: version $Revision: 4.8 $, maxframe=4096␍␊
- N_HDLC line discipline registered.␍␊
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled␍␊
- serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A␍␊
- serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A␍␊
- PPP generic driver version 2.4.2␍␊
- MPPE/MPPC encryption/compression module registered␍␊
- NET: Registered protocol family 24␍␊
- PPPoL2TP kernel driver, V0.18.3␍␊
- PPTP driver version 0.8.5␍␊
- IMQ starting with 3 devices...␍␊
- IMQ driver loaded successfully.␍␊
- ⇥ Hooking IMQ after NAT on PREROUTING.␍␊
- ⇥ Hooking IMQ before NAT on POSTROUTING.␍␊
- pflash: found no supported devices␍␊
- Boot partition size = 262144(0x40000)␍␊
- Creating 2 MTD partitions on "sflash":␍␊
- 0x00000000-0x00040000 : "pmon"␍␊
- 0x001f0000-0x00200000 : "nvram"␍␊
- Found a Zentel NAND flash with 2048B pages or 128KB blocks; total size 128MB␍␊
- lookup_nflash_rootfs_offset: offset = 0x0␍␊
- nflash: squashfs filesystem found at block 9␍␊
- Creating 4 MTD partitions on "nflash":␍␊
- 0x00000000-0x02000000 : "linux"␍␊
- 0x001357a0-0x02000000 : "rootfs"␍␊
- 0x04000000-0x06000000 : "linux2"␍␊
- 0x041357a0-0x06000000 : "rootfs2"␍␊
- NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Zentel NAND 128MiB 3,3V 8-bit)␍␊
- Creating 3 MTD partitions on "brcmnand":␍␊
- 0x00000000-0x02000000 : "trx"␍␊
- 0x04000000-0x06000000 : "asustrx2"␍␊
- 0x06000000-0x07f00000 : "brcmnand"␍␊
- dev_nvram_init: _nvram_init␍␊
- sdhci: Secure Digital Host Controller Interface driver␍␊
- sdhci: Copyright(c) Pierre Ossman␍␊
- u32 classifier␍␊
- Netfilter messages via NETLINK v0.30.␍␊
- nf_conntrack version 0.5.0 (2048 buckets, 16384 max)␍␊
- ip_tables: (C) 2000-2006 Netfilter Core Team␍␊
- net/ipv4/netfilter/tomato_ct.c [Jan 28 2021 20:46:08]␍␊
- NET: Registered protocol family 1␍␊
- NET: Registered protocol family 10␍␊
- ip6_tables: (C) 2000-2006 Netfilter Core Team␍␊
- NET: Registered protocol family 17␍␊
- 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>␍␊
- All bugs added by David S. Miller <[email protected]>␍␊
- VFS: Mounted root (squashfs filesystem) readonly.␍␊
- Freeing unused kernel memory: 200k freed␍␊
- Warning: unable to open an initial console.␍␊
- Failed to execute /sbin/preinit. Attempting defaults...␍␊
- /dev/nvram: No such file or directory␍␊
- 1: set_action 0␍␊
- firmware version: 9.0.0.4.382_52503-gf8d6575␍␊
- [1 init:init_nvram +6] init_nvram for model(49)␍␊
- ctf: module license 'Proprietary' taints kernel.␍␊
- et_module_init: passivemode set to 0x0␍␊
- et_module_init: et_txq_thresh set to 0xce4␍␊
- bcm_robo_enable_switch: EEE is disabled␍␊
- eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.2002 (r382208)␍␊
- set_wltxpower(0x0246): unit: 0, txpower: 100␍␊
- set_wltxpower(0x0246): unit: 1, txpower: 100␍␊
- 1: check_action 0␍␊
- 1: set_action 7␍␊
- hotplug net INTERFACE=eth0 ACTION=add␍␊
- hotplug net INTERFACE=eth0 ACTION=add␍␊
- 1: set_action 0␍␊
- wl_module_init: passivemode set to 0x0␍␊
- PCI: Enabling device 0000:01:01.0 (0000 -> 0002)␍␊
- hotplug net INTERFACE=eth1 ACTION=add␍␊
- hotplug net INTERFACE=eth1 ACTION=add␍␊
- eth1: Broadcom BCM4331 802.11 Wireless Controller 6.30.163.2002 (r382208)␍␊
- PCI: Enabling device 0000:02:01.0 (0000 -> 0002)␍␊
- hotplug net INTERFACE=eth2 ACTION=add␍␊
- hotplug net INTERFACE=eth2 ACTION=add␍␊
- eth2: Broadcom BCM4360 802.11 Wireless Controller 6.30.163.2002 (r382208)␍␊
- 1: check_action 0␍␊
- start jffs2: 8, 32505856␍␊
- Algorithmics/MIPS FPU Emulator v1.5␍␊
- usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)␍␊
- usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)␍␊
- 226: check_action 0␍␊
- checking for user scripts: '.usbhotplug'␍␊
- usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)␍␊
- usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)␍␊
- 240: check_action 0␍␊
- checking for user scripts: '.usbhotplug'␍␊
- start_logger:␍␊
- _ifconfig: name=eth0 flags=1043 IFUP addr= netmask=␍␊
- hotplug net INTERFACE=vlan1 ACTION=add␍␊
- hotplug net INTERFACE=vlan1 ACTION=add␍␊
- usb hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)␍␊
- usb hotplug INTERFACE=9/0/0 ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)␍␊
- 264: check_action 0␍␊
- checking for user scripts: '.usbhotplug'␍␊
- hotplug net INTERFACE=vlan2 ACTION=add␍␊
- hotplug net INTERFACE=vlan2 ACTION=add␍␊
- update_lan_state(lan_, 0, 0)␍␊
- generate_wl_para(0x0b6c): unit 0 subunit -1␍␊
- generate_wl_para(0x0f0a): bw: 0␍␊
- generate_wl_para(0x0f0c): chanspec: 0␍␊
- generate_wl_para(0x0f0d): bw_cap: 3␍␊
- generate_wl_para(0x0f13): obss_coex: 1␍␊
- wlconf_pre(0x10d2): set vhtmode 0␍␊
- generate_wl_para(0x0b6c): unit 1 subunit -1␍␊
- generate_wl_para(0x0f0a): bw: 0␍␊
- generate_wl_para(0x0f0c): chanspec: 0␍␊
- generate_wl_para(0x0f0d): bw_cap: 7␍␊
- generate_wl_para(0x0f13): obss_coex: 0␍␊
- wlconf_pre(0x10cd): set vhtmode 1␍␊
- hotplug net INTERFACE=br0 ACTION=add␍␊
- hotplug net INTERFACE=br0 ACTION=add␍␊
- vlan1: cmd=14 (errno 122): Operation not supported␍␊
- _ifconfig: name=vlan1 flags=1243 IFUP addr= netmask=␍␊
- _ifconfig: name=eth1 flags=1243 IFUP addr= netmask=␍␊
- generate_wl_para(0x0b6c): unit 0 subunit -1␍␊
- generate_wl_para(0x0f0a): bw: 0␍␊
- generate_wl_para(0x0f0c): chanspec: 0␍␊
- generate_wl_para(0x0f0d): bw_cap: 3␍␊
- generate_wl_para(0x0f13): obss_coex: 1␍␊
- generate_wl_para(0x0b6c): unit 0 subunit 1␍␊
- generate_wl_para(0x0b6c): unit 0 subunit 2␍␊
- generate_wl_para(0x0b6c): unit 0 subunit 3␍␊
- ␍␊
- _ifconfig: name=eth2 flags=1243 IFUP addr= netmawlc_phy_cal_init_acphy: NOT Implemented␍␊
- sk=␍␊
- generate_wl_para(0x0b6c): unit 1 subunit -1␍␊
- generate_wl_para(0x0f0a): bw: 0␍␊
- generate_wl_para(0x0f0c): chanspec: 0␍␊
- generate_wl_para(0x0f0d): bw_cap: 7␍␊
- generate_wl_para(0x0f13): obss_coex: 0␍␊
- generate_wl_para(0x0b6c): unit 1 subunit 1␍␊
- generate_wl_para(0x0b6c): unit 1 subunit 2␍␊
- generate_wl_para(0x0b6c): unit 1 subunit 3␍␊
- ␍␊
- start_lan: setting MAC address of bridge br0 as 08:62:66:8D:B7:D8␍␊
- _ifconfig: name=br0 flags=1243 IFUP addr=192.168.1.1 netmask=255.255.255.0␍␊
- _ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0␍␊
- route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0␍␊
- update_lan_state(lan_, 2, 0)␍␊
- nat_rule: stop_nat_rules 1.␍␊
- stop_nat_rules: apply the redirect_rules state 0 ret 0␍␊
- start_lan 2763␍␊
- # wanduck: Got LAN(-1) information:␍␊
- wanduck: delay 1 seconds before the first detect...␍␊
- [check_dev_reset] asd exist when dev is default.␍␊
- [register_feature] blockfile registered ␍␊
- [register_feature] chknvram registered ␍␊
- [register_feature] misc registered ␍␊
- [are_all_sig_file_valid] Local version file is invalid!␍␊
- [init] Remove all invalid files␍␊
- acsd: scan in progress ...␍␊
- wanduck: delay 2 seconds before the first detect...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- wanduck: delay 3 seconds before the first detect...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- wanduck: delay 4 seconds before the first detect...␍␊
- acsd: scan in progress ...␍␊
- acsd: selected channel spec: 0x1002 (2)␍␊
- acsd: acs_set_chspec: 0x1002 (2) for reason APCS_INIT␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- wanduck: delay 5 seconds before the first detect...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- ␍␊
- # Enable direct rule␍␊
- acsd: scan in progress ...␍␊
- acsd: scan in progress ...␍␊
- acsd: selected channel spec: 0xe02a (36/80)␍␊
- acsd: acs_set_chspec: 0xe02a (36/80) for reason APCS_INIT␍␊
- [1 init:start_dnsmasq +23] begin␍␊
- [1 init:stop_dnsmasq +23] begin␍␊
- [1 init:stop_dnsmasq +23] end␍␊
- [1 init:start_dnsmasq +23] end␍␊
- start_lan_port(0) 1␍␊
- decomp: fname=/var/lib/misc/rstats-speed.gz␍␊
- decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0␍␊
- msgget ok␍␊
- load: speed_count = 0␍␊
- load: read source= save_path=␍␊
- load_history: fname=/var/lib/misc/rstats-history.gz␍␊
- decomp: fname=/var/lib/misc/rstats-history.gz␍␊
- decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0␍␊
- decomp: fname=/var/lib/misc/rstats-history.gz␍␊
- decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0␍␊
- load_history: load failed␍␊
- TZ watchdog␍␊
- illegal, cannot enable DualWAN␍␊
- [Mastiff]init␍␊
- disk_monitor: starting...␍␊
- disk_monitor: day=5, week=6, time=5:5.␍␊
- disk_monitor: decide if scan the target...␍␊
- disk_monitor: 0: wait_second=64800...␍␊
- disk_monitor: 1: wait_second=64800...␍␊
- disk_monitor: 2: wait_second=233262000...␍␊
- disk_monitor: wait_second=64800...␍␊
- disk_monitor: Pause...␍␊
- ␍␊
- vlan1: cmd=14 (errno 122): Operation not supported␍␊
- start_wan: start_wan_if(0)!␍␊
- [1 init:start_wan_if +28] unit=0.␍␊
- update_wan_state(wan0_, 0, 0)␍␊
- convert_wan_nvram(wan0_)␍␊
- update_wan_state(wan0_, 1, 0)␍␊
- start_wan_if(0x0650): ifup:eth0␍␊
- _ifconfig: name=eth0 flags=1043 IFUP addr= netmask=␍␊
- start_wan_if(0x0654): start auth:0␍␊
- start_auth:: done␍␊
- start_wan_if(0x065e): start udhcpc:eth0, 0␍␊
- start_wan_if(): End.␍␊
- udhcpc_wan:: deconfig␍␊
- _ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=␍␊
- wan_down(eth0)␍␊
- wan_down(eth0): .␍␊
- stop_auth:: done␍␊
- route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0␍␊
- update_wan_state(wan0_, 3, 0)␍␊
- update_wan_state(wan0_, 4, 3)␍␊
- udhcpc:: deconfig done␍␊
- start_usb␍␊
- [1 init:init_m<break>
- <0x1a><0x0b>`i@S<0x05><0x92><0x95><0x0c><break>
- <0x96>+<0x8b><0x0b>)<0x13><0x13><0x92><0x96><0xd7><0xab><0x0b>⇥ W<0x8b><0x0b><0x12><break>
- .<break>
- <0x03><break>
- om user)␍␊
- <break>
- [This is where it restarts]
- Decompressing...done␍␊
- ␍␊
- ␍␊
- CFE version 6.30.39.16 (r331229) based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)␍␊
- Build Date: <0xe5><0x9b><0x9b> 7<0xe6><0x9c><0x88> 11 14:46:11 CST 2013 (yau@wireless-pub2)␍␊
- Copyright (C) 2000-2008 Broadcom Corporation.␍␊
- ␍␊
- Init Arena␍␊
- Init Devs.␍␊
- Boot partition size = 262144(0x40000)␍␊
- Found an ST compatible serial flash with 32 64KB blocks; total size 2MB␍␊
- Found a Zentel NAND flash with 2048B pages or 128KB blocks; total size 128MB␍␊
- bcm_robo_enable_switch: EEE is disabled␍␊
- et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.16 (r331229)␍␊
- CPU type 0x19749: 600MHz␍␊
- Tot mem: 131072 KBytes␍␊
- ␍␊
- CFE mem: 0x80700000 - 0x8094F790 (2422672)␍␊
- Data: 0x80739390 - 0x8073C740 (13232)␍␊
- BSS: 0x8073C740 - 0x8074D790 (69712)␍␊
- Heap: 0x8074D790 - 0x8094D790 (2097152)␍␊
- Stack: 0x8094D790 - 0x8094F790 (8192)␍␊
- Text: 0x80700000 - 0x80739388 (234376)␍␊
- ␍␊
- Device eth0: hwaddr 08-62-66-8D-B7-D8, ipaddr 192.168.1.1, mask 255.255.255.0␍␊
- gateway not set, nameserver not set␍␊
- Null Rescue Flag.␍␊
- boot the image...␍␊
Advertisement
Add Comment
Please, Sign In to add comment