API tools faq
paste
Advertisement
Guest User

RP64 reboot fail from SD-card

a guest
Jan 26th, 2019
262
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 56.17 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.13 20180801
  2. In
  3. Channel 0: LPDDR4,50MHz
  4. CS = 0
  5. MR0=0x98
  6. MR4=0x1
  7. MR5=0xFF
  8. MR8=0x8
  9. MR12=0x4D
  10. MR14=0x4D
  11. MR18=0x0
  12. MR19=0x0
  13. MR24=0x8
  14. MR25=0x0
  15. CS = 1
  16. MR0=0x18
  17. MR4=0x3
  18. MR5=0xFF
  19. MR8=0x8
  20. MR12=0x4D
  21. MR14=0x4D
  22. MR18=0x0
  23. MR19=0x0
  24. MR24=0x8
  25. MR25=0x0
  26. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  27. Channel 1: LPDDR4,50MHz
  28. CS = 0
  29. MR0=0x98
  30. MR4=0x1
  31. MR5=0xFF
  32. MR8=0x8
  33. MR12=0x4D
  34. MR14=0x4D
  35. MR18=0x0
  36. MR19=0x0
  37. MR24=0x8
  38. MR25=0x0
  39. CS = 1
  40. MR0=0x18
  41. MR4=0x1
  42. MR5=0xFF
  43. MR8=0x8
  44. MR12=0x4D
  45. MR14=0x4D
  46. MR18=0x0
  47. MR19=0x0
  48. MR24=0x8
  49. MR25=0x0
  50. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  51. 256B stride
  52. channel 0
  53. CS = 0
  54. MR0=0x98
  55. MR4=0x1
  56. MR5=0xFF
  57. MR8=0x8
  58. MR12=0x72
  59. MR14=0x72
  60. MR18=0x0
  61. MR19=0x0
  62. MR24=0x8
  63. MR25=0x0
  64. CS = 1
  65. MR0=0x18
  66. MR4=0x3
  67. MR5=0xFF
  68. MR8=0x8
  69. MR12=0x72
  70. MR14=0x72
  71. MR18=0x0
  72. MR19=0x0
  73. MR24=0x8
  74. MR25=0x0
  75. channel 1
  76. CS = 0
  77. MR0=0x98
  78. MR4=0x1
  79. MR5=0xFF
  80. MR8=0x8
  81. MR12=0x72
  82. MR14=0x72
  83. MR18=0x0
  84. MR19=0x0
  85. MR24=0x8
  86. MR25=0x0
  87. CS = 1
  88. MR0=0x18
  89. MR4=0x1
  90. MR5=0xFF
  91. MR8=0x8
  92. MR12=0x72
  93. MR14=0x72
  94. MR18=0x0
  95. MR19=0x0
  96. MR24=0x8
  97. MR25=0x0
  98. channel 0 training pass!
  99. channel 1 training pass!
  100. change freq to 400MHz 0,1
  101. channel 0
  102. CS = 0
  103. MR0=0x98
  104. MR4=0x1
  105. MR5=0xFF
  106. MR8=0x8
  107. MR12=0x72
  108. MR14=0x72
  109. MR18=0x0
  110. MR19=0x0
  111. MR24=0x8
  112. MR25=0x0
  113. CS = 1
  114. MR0=0x18
  115. MR4=0x81
  116. MR5=0xFF
  117. MR8=0x8
  118. MR12=0x72
  119. MR14=0x72
  120. MR18=0x0
  121. MR19=0x0
  122. MR24=0x8
  123. MR25=0x0
  124. channel 1
  125. CS = 0
  126. MR0=0x98
  127. MR4=0x1
  128. MR5=0xFF
  129. MR8=0x8
  130. MR12=0x72
  131. MR14=0x72
  132. MR18=0x0
  133. MR19=0x0
  134. MR24=0x8
  135. MR25=0x0
  136. CS = 1
  137. MR0=0x18
  138. MR4=0x1
  139. MR5=0xFF
  140. MR8=0x8
  141. MR12=0x72
  142. MR14=0x72
  143. MR18=0x0
  144. MR19=0x0
  145. MR24=0x8
  146. MR25=0x0
  147. channel 0 training pass!
  148. channel 1 training pass!
  149. change freq to 800MHz 1,0
  150. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  151. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  152. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  153. OUT
  154. U-Boot SPL board init
  155.  
  156. U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09)
  157. booted from SD
  158. Trying to boot from MMC2
  159. NOTICE: BL31: v1.3(debug):65aa5ce
  160. NOTICE: BL31: Built : 10:47:37, Jun 19 2018
  161. NOTICE: BL31: Rockchip release version: v1.1
  162. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  163. INFO: Using opteed sec cpu_context!
  164. INFO: boot cpu mask: 0
  165. INFO: plat_rockchip_pmu_init(1151): pd status 3e
  166. INFO: BL31: Initializing runtime services
  167. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  168. ERROR: Error initializing runtime service opteed_fast
  169. INFO: BL31: Preparing for EL3 exit to normal world
  170. INFO: Entry point address = 0x200000
  171. INFO: SPSR = 0x3c9
  172.  
  173.  
  174. U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000)
  175.  
  176. Model: Pine64 RockPro64
  177. DRAM: 3.9 GiB
  178. DCDC_REG1@vdd_center: ; enabling
  179. DCDC_REG2@vdd_cpu_l: ; enabling
  180. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  181. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  182. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  183. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  184. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  185. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  186. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  187. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  188. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  189. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  190. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  191. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  192. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  193. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  194. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  195. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  196. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  197. vdd-log@vdd_log: ; enabling (ret: -38)
  198. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  199. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  200. *** Warning - bad CRC, using default environment
  201.  
  202. In: serial@ff1a0000
  203. Out: serial@ff1a0000
  204. Err: serial@ff1a0000
  205. Model: Pine64 RockPro64
  206. Net: eth0: ethernet@fe300000
  207. Hit any key to stop autoboot: 0
  208. Card did not respond to voltage select!
  209. mmc_init: -95, time 19
  210. switch to partitions #0, OK
  211. mmc1 is current device
  212. Scanning mmc 1:7...
  213. Found /boot/extlinux/extlinux.conf
  214. Retrieving file: /boot/extlinux/extlinux.conf
  215. 2041 bytes read in 29 ms (68.4 KiB/s)
  216. select kernel
  217. 1:kernel-4.20.0-1083-ayufan-g686e1f1aa461
  218. 2:kernel-4.20.0-1083-ayufan-g686e1f1aa461-memtest
  219. 3:kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1
  220. 4:kernel-4.4.154-1124-rockchip-ayufan-ged3ce4d15ec1-memtest
  221. Enter choice: 1:kernel-4.20.0-1083-ayufan-g686e1f1aa461
  222. Retrieving file: /boot/initrd.img-4.20.0-1083-ayufan-g686e1f1aa461
  223. 5677918 bytes read in 631 ms (8.6 MiB/s)
  224. Retrieving file: /boot/vmlinuz-4.20.0-1083-ayufan-g686e1f1aa461
  225. 29598208 bytes read in 3148 ms (9 MiB/s)
  226. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=9e:da:8f:ae:43:c3 eth1addr= serial=96ed659a4f7abc3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  227. Retrieving file: /boot/dtbs/4.20.0-1083-ayufan-g686e1f1aa461/rockchip/rk3399-rockpro64.dtb
  228. 55324 bytes read in 103 ms (524.4 KiB/s)
  229. ## Flattened Device Tree blob at 01f00000
  230. Booting using the fdt blob at 0x1f00000
  231. Loading Ramdisk to f5998000, end f5f0235e ... OK
  232. Loading Device Tree to 00000000f5987000, end 00000000f599781b ... OK
  233.  
  234. Starting kernel ...
  235.  
  236. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  237. [ 0.000000] Linux version 4.20.0-1083-ayufan-g686e1f1aa461 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #ayufan SMP PREEMPT Sun Dec 30 13:42:26 UTC 2018
  238. [ 0.000000] Machine model: Pine64 RockPro64
  239. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  240. [ 0.000000] printk: bootconsole [uart8250] enabled
  241. [ 0.000000] efi: Getting EFI parameters from FDT:
  242. [ 0.000000] efi: UEFI not found.
  243. [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
  244. [ 0.000000] NUMA: No NUMA configuration found
  245. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
  246. [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa3840-0xf6fa4fff]
  247. [ 0.000000] Zone ranges:
  248. [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
  249. [ 0.000000] Normal empty
  250. [ 0.000000] Movable zone start for each node
  251. [ 0.000000] Early memory node ranges
  252. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  253. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  254. [ 0.000000] psci: probing for conduit method from DT.
  255. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  256. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  257. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  258. [ 0.000000] psci: SMC Calling Convention v1.0
  259. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  260. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
  261. [ 0.000000] Detected VIPT I-cache on CPU0
  262. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  263. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  264. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  265. [ 0.000000] Policy zone: DMA32
  266. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=9e:da:8f:ae:43:c3 eth1addr= serial=96ed659a4f7abc3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  267. [ 0.000000] Memory: 3942836K/4061184K available (18044K kernel code, 1896K rwdata, 7376K rodata, 1536K init, 480K bss, 101964K reserved, 16384K cma-reserved)
  268. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  269. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  270. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  271. [ 0.000000] Tasks RCU enabled.
  272. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  273. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  274. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  275. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  276. [ 0.000000] GICv3: Distributor has no Range Selector support
  277. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  278. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  279. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  280. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6880000 (flat, esz 8, psz 64K, shr 0)
  281. [ 0.000000] ITS: using cache flushing for cmd queue
  282. [ 0.000000] GICv3: using LPI property table @0x00000000f6840000
  283. [ 0.000000] GIC: using cache flushing for LPI property table
  284. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6850000
  285. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  286. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  287. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  288. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  289. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  290. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  291. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  292. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  293. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  294. [ 0.002914] Console: colour dummy device 80x25
  295. [ 0.003337] printk: console [tty0] enabled
  296. [ 0.003733] printk: bootconsole [uart8250] disabled
  297. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  298. [ 0.000000] Linux version 4.20.0-1083-ayufan-g686e1f1aa461 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #ayufan SMP PREEMPT Sun Dec 30 13:42:26 UTC 2018
  299. [ 0.000000] Machine model: Pine64 RockPro64
  300. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  301. [ 0.000000] printk: bootconsole [uart8250] enabled
  302. [ 0.000000] efi: Getting EFI parameters from FDT:
  303. [ 0.000000] efi: UEFI not found.
  304. [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
  305. [ 0.000000] NUMA: No NUMA configuration found
  306. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
  307. [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa3840-0xf6fa4fff]
  308. [ 0.000000] Zone ranges:
  309. [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
  310. [ 0.000000] Normal empty
  311. [ 0.000000] Movable zone start for each node
  312. [ 0.000000] Early memory node ranges
  313. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  314. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  315. [ 0.000000] psci: probing for conduit method from DT.
  316. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  317. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  318. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  319. [ 0.000000] psci: SMC Calling Convention v1.0
  320. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  321. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
  322. [ 0.000000] Detected VIPT I-cache on CPU0
  323. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  324. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  325. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  326. [ 0.000000] Policy zone: DMA32
  327. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=9e:da:8f:ae:43:c3 eth1addr= serial=96ed659a4f7abc3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  328. [ 0.000000] Memory: 3942836K/4061184K available (18044K kernel code, 1896K rwdata, 7376K rodata, 1536K init, 480K bss, 101964K reserved, 16384K cma-reserved)
  329. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  330. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  331. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  332. [ 0.000000] Tasks RCU enabled.
  333. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  334. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  335. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  336. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  337. [ 0.000000] GICv3: Distributor has no Range Selector support
  338. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  339. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  340. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  341. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6880000 (flat, esz 8, psz 64K, shr 0)
  342. [ 0.000000] ITS: using cache flushing for cmd queue
  343. [ 0.000000] GICv3: using LPI property table @0x00000000f6840000
  344. [ 0.000000] GIC: using cache flushing for LPI property table
  345. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6850000
  346. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  347. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  348. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  349. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  350. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  351. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  352. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  353. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  354. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  355. [ 0.002914] Console: colour dummy device 80x25
  356. [ 0.003337] printk: console [tty0] enabled
  357. [ 0.003733] printk: bootconsole [uart8250] disabled
  358. [ 0.004301] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  359. [ 0.004336] pid_max: default: 32768 minimum: 301
  360. [ 0.004470] LSM: Security Framework initializing
  361. [ 0.006546] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  362. [ 0.007605] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  363. [ 0.007691] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  364. [ 0.007745] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  365. [ 0.030978] ASID allocator initialised with 32768 entries
  366. [ 0.038976] rcu: Hierarchical SRCU implementation.
  367. [ 0.047106] Platform MSI: interrupt-controller@fee20000 domain created
  368. [ 0.047544] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  369. [ 0.051986] EFI services will not be available.
  370. [ 0.059886] smp: Bringing up secondary CPUs ...
  371. [ 0.092100] Detected VIPT I-cache on CPU1
  372. [ 0.092137] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  373. [ 0.092152] GICv3: CPU1: using allocated LPI pending table @0x00000000f6860000
  374. [ 0.092197] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  375. [ 0.124182] Detected VIPT I-cache on CPU2
  376. [ 0.124211] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  377. [ 0.124223] GICv3: CPU2: using allocated LPI pending table @0x00000000f6870000
  378. [ 0.124254] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  379. [ 0.156279] Detected VIPT I-cache on CPU3
  380. [ 0.156306] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  381. [ 0.156318] GICv3: CPU3: using allocated LPI pending table @0x00000000f6900000
  382. [ 0.156347] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  383. [ 0.190973] CPU features: enabling workaround for EL2 vector hardening
  384. [ 0.191490] Detected PIPT I-cache on CPU4
  385. [ 0.192681] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  386. [ 0.193133] GICv3: CPU4: using allocated LPI pending table @0x00000000f6910000
  387. [ 0.194311] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  388. [ 0.230548] Detected PIPT I-cache on CPU5
  389. [ 0.231682] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  390. [ 0.232104] GICv3: CPU5: using allocated LPI pending table @0x00000000f6920000
  391. [ 0.233161] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  392. [ 0.236954] smp: Brought up 1 node, 6 CPUs
  393. [ 0.237351] SMP: Total of 6 processors activated.
  394. [ 0.237397] CPU features: detected: GIC system register CPU interface
  395. [ 0.237424] CPU features: detected: 32-bit EL0 Support
  396. [ 0.237457] CPU features: detected: CRC32 instructions
  397. [ 0.260024] CPU: All CPU(s) started at EL2
  398. [ 0.260497] alternatives: patching kernel code
  399. [ 0.264945] devtmpfs: initialized
  400. [ 0.283633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  401. [ 0.283892] futex hash table entries: 2048 (order: 5, 131072 bytes)
  402. [ 0.285408] xor: measuring software checksum speed
  403. [ 0.323019] 8regs : 1154.000 MB/sec
  404. [ 0.363238] 8regs_prefetch: 1033.000 MB/sec
  405. [ 0.403460] 32regs : 1421.000 MB/sec
  406. [ 0.443665] 32regs_prefetch: 1193.000 MB/sec
  407. [ 0.443686] xor: using function: 32regs (1421.000 MB/sec)
  408. [ 0.443743] pinctrl core: initialized pinctrl subsystem
  409. [ 0.448644] DMI not present or invalid.
  410. [ 0.450237] NET: Registered protocol family 16
  411. [ 0.457704] audit: initializing netlink subsys (disabled)
  412. [ 0.458287] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1
  413. [ 0.464416] cpuidle: using governor menu
  414. [ 0.466190] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  415. [ 0.466283] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  416. [ 0.483553] DMA: preallocated 1024 KiB pool for atomic allocations
  417. [ 0.487225] Serial: AMBA PL011 UART driver
  418. [ 0.606039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  419. [ 0.608266] cryptd: max_cpu_qlen set to 1000
  420. [ 0.676772] raid6: int64x1 gen() 217 MB/s
  421. [ 0.744696] raid6: int64x1 xor() 218 MB/s
  422. [ 0.813091] raid6: int64x2 gen() 338 MB/s
  423. [ 0.881742] raid6: int64x2 xor() 300 MB/s
  424. [ 0.950021] raid6: int64x4 gen() 520 MB/s
  425. [ 1.018336] raid6: int64x4 xor() 383 MB/s
  426. [ 1.086740] raid6: int64x8 gen() 492 MB/s
  427. [ 1.155046] raid6: int64x8 xor() 375 MB/s
  428. [ 1.223535] raid6: neonx1 gen() 365 MB/s
  429. [ 1.291835] raid6: neonx1 xor() 427 MB/s
  430. [ 1.360237] raid6: neonx2 gen() 584 MB/s
  431. [ 1.428506] raid6: neonx2 xor() 604 MB/s
  432. [ 1.496937] raid6: neonx4 gen() 756 MB/s
  433. [ 1.565247] raid6: neonx4 xor() 723 MB/s
  434. [ 1.633618] raid6: neonx8 gen() 821 MB/s
  435. [ 1.701986] raid6: neonx8 xor() 768 MB/s
  436. [ 1.702005] raid6: using algorithm neonx8 gen() 821 MB/s
  437. [ 1.702024] raid6: .... xor() 768 MB/s, rmw enabled
  438. [ 1.702042] raid6: using neon recovery algorithm
  439. [ 1.704200] ACPI: Interpreter disabled.
  440. [ 1.707115] vcc3v3_pcie: supplied by dc_12v
  441. [ 1.709880] vcc_sys: supplied by dc_12v
  442. [ 1.714180] vgaarb: loaded
  443. [ 1.715599] SCSI subsystem initialized
  444. [ 1.717234] usbcore: registered new interface driver usbfs
  445. [ 1.717386] usbcore: registered new interface driver hub
  446. [ 1.717720] usbcore: registered new device driver usb
  447. [ 1.720994] media: Linux media interface: v0.10
  448. [ 1.721177] videodev: Linux video capture interface: v2.00
  449. [ 1.721578] pps_core: LinuxPPS API ver. 1 registered
  450. [ 1.721627] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  451. [ 1.721689] PTP clock support registered
  452. [ 1.725165] Advanced Linux Sound Architecture Driver Initialized.
  453. [ 1.726353] Bluetooth: Core ver 2.22
  454. [ 1.726478] NET: Registered protocol family 31
  455. [ 1.726498] Bluetooth: HCI device and connection manager initialized
  456. [ 1.726526] Bluetooth: HCI socket layer initialized
  457. [ 1.726555] Bluetooth: L2CAP socket layer initialized
  458. [ 1.726598] Bluetooth: SCO socket layer initialized
  459. [ 1.726644] NetLabel: Initializing
  460. [ 1.726661] NetLabel: domain hash size = 128
  461. [ 1.726677] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  462. [ 1.726827] NetLabel: unlabeled traffic allowed by default
  463. [ 1.730885] clocksource: Switched to clocksource arch_sys_counter
  464. [ 1.731752] VFS: Disk quotas dquot_6.6.0
  465. [ 1.732187] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  466. [ 1.732516] pnp: PnP ACPI: disabled
  467. [ 1.749741] NET: Registered protocol family 2
  468. [ 1.754494] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  469. [ 1.754834] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  470. [ 1.755391] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  471. [ 1.756182] TCP: Hash tables configured (established 32768 bind 32768)
  472. [ 1.756755] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  473. [ 1.756981] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  474. [ 1.757464] NET: Registered protocol family 1
  475. [ 1.760880] RPC: Registered named UNIX socket transport module.
  476. [ 1.760909] RPC: Registered udp transport module.
  477. [ 1.760927] RPC: Registered tcp transport module.
  478. [ 1.760945] RPC: Registered tcp NFSv4.1 backchannel transport module.
  479. [ 1.763584] Trying to unpack rootfs image as initramfs...
  480. [ 2.216852] Freeing initrd memory: 5544K
  481. [ 2.224899] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  482. [ 2.228710] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  483. [ 2.229646] kvm [1]: 8-bit VMID
  484. [ 2.229675] kvm [1]: IPA Size Limit: 40bits
  485. [ 2.231464] kvm [1]: vgic-v2@fff20000
  486. [ 2.231814] kvm [1]: GIC system register CPU interface enabled
  487. [ 2.233886] kvm [1]: vgic interrupt IRQ10
  488. [ 2.236831] kvm [1]: Hyp mode initialized successfully
  489. [ 2.504511] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  490. [ 2.523022] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  491. [ 2.524882] NFS: Registering the id_resolver key type
  492. [ 2.524976] Key type id_resolver registered
  493. [ 2.524994] Key type id_legacy registered
  494. [ 2.525024] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  495. [ 2.525046] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  496. [ 2.527542] fuse init (API version 7.28)
  497. [ 2.528525] 9p: Installing v9fs 9p2000 file system support
  498. [ 3.620717] NET: Registered protocol family 38
  499. [ 3.637218] Key type asymmetric registered
  500. [ 3.637291] Asymmetric key parser 'x509' registered
  501. [ 3.637517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  502. [ 3.638268] io scheduler noop registered
  503. [ 3.638906] io scheduler cfq registered (default)
  504. [ 3.638933] io scheduler mq-deadline registered
  505. [ 3.638953] io scheduler kyber registered
  506. [ 3.648656] vcc5v0_host: supplied by vcc_sys
  507. [ 3.649059] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
  508. [ 3.654001] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
  509. [ 3.707633] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  510. [ 3.707715] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  511. [ 3.713347] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  512. [ 3.713463] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  513. [ 3.723972] pwm-regulator: supplied by vcc_sys
  514. [ 3.724841] vcc3v3_sys: supplied by vcc_sys
  515. [ 3.724958] vcc5v0_typec: supplied by vcc_sys
  516. [ 3.738292] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  517. [ 3.743369] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  518. [ 3.745421] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  519. [ 3.861568] printk: console [ttyS2] enabled
  520. [ 3.865738] SuperH (H)SCI(F) driver initialized
  521. [ 3.867725] msm_serial: driver initialized
  522. [ 3.893409] cacheinfo: Unable to detect cache hierarchy for CPU 0
  523. [ 3.956365] brd: module loaded
  524. [ 3.973981] loop: module loaded
  525. [ 4.027316] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  526. [ 4.027953] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  527. [ 4.031911] m25p80 spi0.0: gd25q128 (16384 Kbytes)
  528. [ 4.043561] 3 fixed-partitions partitions found on MTD device spi0.0
  529. [ 4.044182] Creating 3 MTD partitions on "spi0.0":
  530. [ 4.044636] 0x000000000000-0x0000003f8000 : "loader"
  531. [ 4.049394] 0x0000003f8000-0x000000400000 : "env"
  532. [ 4.052346] 0x0000007c0000-0x000000800000 : "vendor"
  533. [ 4.059772] libphy: Fixed MDIO Bus: probed
  534. [ 4.062188] tun: Universal TUN/TAP device driver, 1.6
  535. [ 4.069269] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  536. [ 4.069847] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  537. [ 4.070888] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  538. [ 4.071525] igb: Copyright (c) 2007-2014 Intel Corporation.
  539. [ 4.072139] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  540. [ 4.072844] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  541. [ 4.074378] sky2: driver version 1.30
  542. [ 4.077959] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  543. [ 4.079268] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.4
  544. [ 4.079949] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  545. [ 4.080595] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  546. [ 4.081111] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  547. [ 4.081630] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  548. [ 4.082333] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  549. [ 4.082990] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  550. [ 4.088555] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  551. [ 4.090094] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  552. [ 4.090813] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  553. [ 4.091296] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  554. [ 4.091974] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  555. [ 4.092651] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  556. [ 4.093126] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  557. [ 4.093762] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  558. [ 4.094378] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  559. [ 4.094941] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  560. [ 4.095472] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  561. [ 4.363280] libphy: stmmac: probed
  562. [ 4.363642] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  563. [ 4.364765] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  564. [ 4.369933] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  565. [ 4.371035] usbcore: registered new interface driver pegasus
  566. [ 4.371645] usbcore: registered new interface driver rtl8150
  567. [ 4.372235] usbcore: registered new interface driver r8152
  568. [ 4.372810] usbcore: registered new interface driver asix
  569. [ 4.373394] usbcore: registered new interface driver ax88179_178a
  570. [ 4.374008] usbcore: registered new interface driver cdc_ether
  571. [ 4.374641] usbcore: registered new interface driver dm9601
  572. [ 4.375223] usbcore: registered new interface driver CoreChips
  573. [ 4.375817] usbcore: registered new interface driver smsc75xx
  574. [ 4.376413] usbcore: registered new interface driver smsc95xx
  575. [ 4.376987] usbcore: registered new interface driver net1080
  576. [ 4.377571] usbcore: registered new interface driver plusb
  577. [ 4.378139] usbcore: registered new interface driver cdc_subset
  578. [ 4.378835] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  579. [ 4.379598] usbcore: registered new interface driver cdc_ncm
  580. [ 4.380778] VFIO - User Level meta-driver version: 0.3
  581. [ 4.385194] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
  582. [ 4.400639] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
  583. [ 4.407839] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
  584. [ 4.421078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  585. [ 4.421710] ehci-pci: EHCI PCI platform driver
  586. [ 4.422230] ehci-platform: EHCI generic platform driver
  587. [ 4.425280] ehci-platform fe380000.usb: EHCI Host Controller
  588. [ 4.425899] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  589. [ 4.428712] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  590. [ 4.446564] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  591. [ 4.448864] hub 1-0:1.0: USB hub found
  592. [ 4.449300] hub 1-0:1.0: 1 port detected
  593. [ 4.453718] ehci-platform fe3c0000.usb: EHCI Host Controller
  594. [ 4.454296] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  595. [ 4.458365] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  596. [ 4.478578] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  597. [ 4.480559] hub 2-0:1.0: USB hub found
  598. [ 4.480942] hub 2-0:1.0: 1 port detected
  599. [ 4.483263] ehci-orion: EHCI orion driver
  600. [ 4.484083] ehci-exynos: EHCI EXYNOS driver
  601. [ 4.484734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  602. [ 4.485448] ohci-pci: OHCI PCI platform driver
  603. [ 4.486022] ohci-platform: OHCI generic platform driver
  604. [ 4.487231] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  605. [ 4.487864] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  606. [ 4.490689] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  607. [ 4.556121] hub 3-0:1.0: USB hub found
  608. [ 4.556510] hub 3-0:1.0: 1 port detected
  609. [ 4.557939] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  610. [ 4.558718] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  611. [ 4.561344] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  612. [ 4.623929] hub 4-0:1.0: USB hub found
  613. [ 4.624316] hub 4-0:1.0: 1 port detected
  614. [ 4.625708] ohci-exynos: OHCI EXYNOS driver
  615. [ 4.627852] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  616. [ 4.628377] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  617. [ 4.631615] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  618. [ 4.632537] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
  619. [ 4.634970] hub 5-0:1.0: USB hub found
  620. [ 4.635383] hub 5-0:1.0: 1 port detected
  621. [ 4.636265] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  622. [ 4.636779] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  623. [ 4.637487] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  624. [ 4.638206] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  625. [ 4.640148] hub 6-0:1.0: USB hub found
  626. [ 4.640568] hub 6-0:1.0: 1 port detected
  627. [ 4.641702] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  628. [ 4.642233] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  629. [ 4.645336] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  630. [ 4.646294] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
  631. [ 4.648679] hub 7-0:1.0: USB hub found
  632. [ 4.649097] hub 7-0:1.0: 1 port detected
  633. [ 4.650212] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  634. [ 4.650759] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  635. [ 4.651469] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  636. [ 4.652145] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  637. [ 4.654131] hub 8-0:1.0: USB hub found
  638. [ 4.654588] hub 8-0:1.0: 1 port detected
  639. [ 4.656379] usbcore: registered new interface driver usb-storage
  640. [ 4.667014] i2c /dev entries driver
  641. [ 4.676875] rk808 0-001b: chip id: 0x0
  642. [ 4.687427] rk808-regulator rk808-regulator: there is no dvs0 gpio
  643. [ 4.688060] rk808-regulator rk808-regulator: there is no dvs1 gpio
  644. [ 4.688739] DCDC_REG1: supplied by vcc_sys
  645. [ 4.690374] DCDC_REG2: supplied by vcc_sys
  646. [ 4.691702] DCDC_REG3: supplied by vcc_sys
  647. [ 4.692600] DCDC_REG4: supplied by vcc_sys
  648. [ 4.693553] LDO_REG1: supplied by vcc_sys
  649. [ 4.695322] LDO_REG2: supplied by vcc_sys
  650. [ 4.695921] vcc2v8_dvp: Bringing 3000000uV into 2800000-2800000uV
  651. [ 4.697549] LDO_REG3: supplied by vcc_sys
  652. [ 4.699081] LDO_REG4: supplied by vcc_sys
  653. [ 4.699673] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
  654. [ 4.701438] LDO_REG5: supplied by vcc_sys
  655. [ 4.703297] LDO_REG6: supplied by vcc_sys
  656. [ 4.704832] LDO_REG7: supplied by vcc_sys
  657. [ 4.706330] LDO_REG8: supplied by vcc_sys
  658. [ 4.708007] SWITCH_REG1: supplied by vcc3v3_sys
  659. [ 4.708873] SWITCH_REG2: supplied by vcc3v3_sys
  660. [ 4.714838] rk808-rtc rk808-rtc: registered as rtc0
  661. [ 4.716476] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  662. [ 4.717140] fan53555-reg: supplied by vcc_sys
  663. [ 4.719594] vcc1v8_s3: supplied by vcc_1v8
  664. [ 4.721140] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  665. [ 4.721798] fan53555-reg: supplied by vcc_sys
  666. [ 4.722992] random: fast init done
  667. [ 4.731595] rockchip-rga ff680000.rga: HW Version: 0x03.02
  668. [ 4.743890] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  669. [ 4.747052] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.21
  670. [ 4.748274] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
  671. [ 4.749181] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.20
  672. [ 4.750033] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
  673. [ 4.751165] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
  674. [ 4.775439] Bluetooth: HCI UART driver ver 2.3
  675. [ 4.777716] cpu cpu0: Linked as a consumer to regulator.11
  676. [ 4.778413] cpu cpu0: Dropping the link to regulator.11
  677. [ 4.779704] cpu cpu0: Linked as a consumer to regulator.11
  678. [ 4.782291] cpu cpu4: Linked as a consumer to regulator.24
  679. [ 4.783385] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  680. [ 4.785162] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  681. [ 4.787698] sdhci: Secure Digital Host Controller Interface driver
  682. [ 4.788254] sdhci: Copyright(c) Pierre Ossman
  683. [ 4.788913] Synopsys Designware Multimedia Card Interface Driver
  684. [ 4.790519] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  685. [ 4.791444] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  686. [ 4.792049] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  687. [ 4.792591] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  688. [ 4.793555] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.17
  689. [ 4.794249] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  690. [ 4.794898] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
  691. [ 4.806973] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  692. [ 4.822549] sdhci-pltfm: SDHCI platform and OF driver helper
  693. [ 4.825212] mmc1: CQHCI version 5.10
  694. [ 4.849981] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  695. [ 4.857154] ledtrig-cpu: registered to indicate activity on CPUs
  696. [ 4.860377] usbcore: registered new interface driver usbhid
  697. [ 4.860896] usbhid: USB HID core driver
  698. [ 4.864318] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
  699. [ 4.871429] xt_time: kernel timezone is -0000
  700. [ 4.871853] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  701. [ 4.872661] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  702. [ 4.873455] IPVS: ipvs loaded.
  703. [ 4.873730] IPVS: [rr] scheduler registered.
  704. [ 4.874108] IPVS: [wrr] scheduler registered.
  705. [ 4.874543] IPVS: [lc] scheduler registered.
  706. [ 4.874921] IPVS: [wlc] scheduler registered.
  707. [ 4.875274] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  708. [ 4.875309] IPVS: [fo] scheduler registered.
  709. [ 4.876561] IPVS: [ovf] scheduler registered.
  710. [ 4.876954] IPVS: [lblc] scheduler registered.
  711. [ 4.877351] IPVS: [lblcr] scheduler registered.
  712. [ 4.877752] IPVS: [dh] scheduler registered.
  713. [ 4.878131] IPVS: [sh] scheduler registered.
  714. [ 4.878516] IPVS: [sed] scheduler registered.
  715. [ 4.878903] IPVS: [nq] scheduler registered.
  716. [ 4.879531] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  717. [ 4.880161] Initializing XFRM netlink socket
  718. [ 4.881011] NET: Registered protocol family 10
  719. [ 4.882007] Segment Routing with IPv6
  720. [ 4.882605] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  721. [ 4.883518] NET: Registered protocol family 17
  722. [ 4.883951] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  723. [ 4.885176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  724. [ 4.885703] Bluetooth: HIDP socket layer initialized
  725. [ 4.886175] 8021q: 802.1Q VLAN Support v1.8
  726. [ 4.886668] 9pnet: Installing 9P2000 support
  727. [ 4.887098] Key type dns_resolver registered
  728. [ 4.888240] registered taskstats version 1
  729. [ 4.889417] Btrfs loaded, crc32c=crc32c-generic
  730. [ 4.909967] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  731. [ 4.912752] rk808-rtc rk808-rtc: setting system clock to 2019-01-26 10:35:35 UTC (1548498935)
  732. [ 4.913525] of_cfs_init
  733. [ 4.913791] of_cfs_init: OK
  734. [ 4.914276] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  735. [ 4.915061] cfg80211: failed to load regulatory.db
  736. [ 4.916119] vcc3v3_pcie: disabling
  737. [ 4.916490] ALSA device list:
  738. [ 4.916765] No soundcards found.
  739. [ 4.917452] ttyS2 - failed to request DMA
  740. [ 4.918324] Freeing unused kernel memory: 1536K
  741. [ 4.942821] Run /init as init process
  742. Loading, please wait...
  743. [ 4.990625] usb 7-1: new high-speed USB device number 2 using xhci-hcd
  744. starting version 237
  745. [ 5.047305] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 221
  746. [ 5.047993] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
  747. [ 5.050341] mmcblk0: mmc0:59b4 SD 7.23 GiB
  748. [ 5.061939] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  749. [ 5.062550] usb 3-1: new low-speed USB device number 2 using ohci-platform
  750. [ 5.196480] hub 7-1:1.0: USB hub found
  751. [ 5.197221] hub 7-1:1.0: 4 ports detected
  752. [ 5.212625] iommu: Adding device ff8f0000.vop to group 0
  753. [ 5.213257] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  754. [ 5.215699] iommu: Adding device ff900000.vop to group 1
  755. [ 5.216345] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  756. [ 5.222124] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  757. [ 5.223229] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  758. [ 5.224264] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  759. [ 5.227680] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  760. [ 5.230310] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  761. [ 5.231594] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  762. [ 5.234001] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  763. [ 5.234855] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  764. [ 5.235434] [drm] No driver support for vblank timestamp query.
  765. [ 5.304181] Console: switching to colour frame buffer device 240x67
  766. [ 5.304923] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:2516:0042.0001/input/input1
  767. [ 5.307970] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  768. [ 5.336931] rockchip-drm display-subsystem: fb0: frame buffer device
  769. [ 5.355073] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  770. [ 5.363413] hid-generic 0003:2516:0042.0001: input: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3a0000.usb-1/input0
  771. [ 5.376712] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) Consumer Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:2516:0042.0002/input/input2
  772. [ 5.437012] hub 8-1:1.0: USB hub found
  773. [ 5.438061] hub 8-1:1.0: 4 ports detected
  774. [ 5.439615] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) System Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:2516:0042.0002/input/input3
  775. [ 5.442890] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) Keyboard as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:2516:0042.0002/input/input5
  776. [ 5.445689] hid-generic 0003:2516:0042.0002: input: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3a0000.usb-1/input1
  777. [ 5.506788] usb 7-1.1: new high-speed USB device number 3 using xhci-hcd
  778. Begin: Loading essential drivers ... done.
  779. Begin: Running /scripts/init-premount ... done.
  780. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  781. Begin: Running /scripts/local-premount ... done.
  782. Warning: fsck not present, so skipping root file system
  783. [ 5.662099] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  784. done.
  785. [ 5.676818] hub 7-1.1:1.0: USB hub found
  786. Begin: Running /scripts/local-bottom ... done.
  787. Begin: Running /scripts/init-bottom ... [ 5.677769] hub 7-1.1:1.0: 4 ports detected
  788. done.
  789. [ 5.872222] usb 8-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  790. [ 5.997035] hub 8-1.1:1.0: USB hub found
  791. [ 5.997889] hub 8-1.1:1.0: 4 ports detected
  792. [ 6.043705] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  793. [ 6.047148] systemd[1]: Detected architecture arm64.
  794.  
  795. Welcome to Ubuntu 18.04.1 LTS!
  796.  
  797. [ 6.062615] systemd[1]: Set hostname to <rockpro64>.
  798. [ 6.315765] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  799. [ 6.318044] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  800. [ 6.530254] random: systemd: uninitialized urandom read (16 bytes read)
  801. [ 6.531213] systemd[1]: Reached target Remote File Systems.
  802. [ OK ] Reached target Remote File Systems.
  803. [ 6.543133] random: systemd: uninitialized urandom read (16 bytes read)
  804. [ 6.545129] systemd[1]: Created slice System Slice.
  805. [ OK ] Created slice System Slice.
  806. [ 6.555090] random: systemd: uninitialized urandom read (16 bytes read)
  807. [ 6.556607] systemd[1]: Listening on Journal Socket.
  808. [ OK ] Listening on Journal Socket.
  809. [ 6.578058] systemd[1]: Starting Load Kernel Modules...
  810. Starting Load Kernel Modules...
  811. [ 6.596161] systemd[1]: Starting Restore / save the current clock...
  812. Starting Restore / save the current clock...
  813. Starting Nameserver information manager...
  814. [ OK ] Created slice system-serial\x2dgetty.slice.
  815. Starting Set the console keyboard layout...
  816. Starting Create list of required stce nodes for the current kernel...
  817. [ OK ] Listening on udev Kernel Socket.
  818. [ OK ] Listening on Journal Socket (/dev/log).
  819. [ OK ] Listening on Syslog Socket.
  820. [ OK ] Started ntp-systemd-netif.path.
  821. Mounting POSIX Message Queue File System...
  822. [ OK ] Listening on udev Control Socket.
  823. Starting udev Coldplug all Devices...
  824. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  825. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  826. [ OK ] Created slice User and Session Slice.
  827. [ OK ] Reached target System Time Synchronized.
  828. Mounting Kernel Debug File System...
  829. Mounting Huge Pages File System...
  830. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  831. [ OK ] Reached target Local Encrypted Volumes.
  832. [ OK ] Listening on Journal Audit Socket.
  833. Starting Journal Service...
  834. Starting Remount Root and Kernel File Systems...
  835. [ OK ] Reached target Swap.
  836. [ OK ] Reached target Slices.
  837. [ OK ] Started Load Kernel Modules.
  838. [ OK ] Started Restore / save the current clock.
  839. [ OK ] Started Set the console keyboard layout.
  840. [ OK ] Started Journal Service.
  841. [ OK ] Started Create list of required stavice nodes for the current kernel.
  842. [ OK ] Mounted POSIX Message Queue File System.
  843. [ OK ] Mounted Kernel Debug File System.
  844. [ OK ] Mounted Huge Pages File System.
  845. [ OK ] Started Remount Root and Kernel File Systems.
  846. [ OK ] Started Nameserver information manager.
  847. [ OK ] Reached target Network (Pre).
  848. Starting Load/Save Random Seed...
  849. Starting Create Static Device Nodes in /dev...
  850. Starting Flush Journal to Persistent Storage...
  851. Mounting Kernel Configuration File System...
  852. Starting Apply Kernel Variables...
  853. Mounting FUSE Control File System...
  854. [ OK ] Started Load/Save Random Seed.
  855. [ OK ] Mounted Kernel Configuration File System.
  856. [ OK ] Mounted FUSE Control File System.
  857. [ OK ] Started Apply Kernel Variables.
  858. [ OK ] Started Create Static Device Nodes in /dev.
  859. [ OK ] Started udev Coldplug all Devices.
  860. Starting udev Kernel Device Manager...
  861. [ OK ] Reached target Local File Systems (Pre).
  862. [ OK ] Started udev Kernel Device Manager.
  863. Starting Network Service...
  864. [ OK ] Found device /dev/ttyS2.
  865. [ 9.006023] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  866. [ 9.008525] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  867. [ 9.009201] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl
  868. [ 9.010376] es8316 1-0010: Error applying setting, reverse things back
  869. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  870. [ OK ] Started Network Service.
  871. [ OK ] Found device /dev/disk/by-label/boot.
  872. [ OK ] Started Flush Journal to Persistent Storage.
  873. Mounting /boot/efi...
  874. [ OK ] Mounted /boot/efi.
  875. [ OK ] Reached target Local File Systems.
  876. Starting Raise network interfaces...
  877. Starting Set console font and keymap...
  878. Starting Create Volatile Files and Directories...
  879. [ OK ] Started Set console font and keymap.
  880. [ OK ] Started Create Volatile Files and Directories.
  881. Starting Network Time Synchronization...
  882. Starting Update UTMP about System Boot/Shutdown...
  883. Starting Network Name Resolution...
  884. [ OK ] Started Update UTMP about System Boot/Shutdown.
  885. [ OK ] Started Raise network interfaces.
  886. [ OK ] Started Network Time Synchronization.
  887. [ OK ] Reached target System Initialization.
  888. [ OK ] Started Discard unused blocks once a week.
  889. [ OK ] Started Message of the Day.
  890. [ OK ] Started Daily apt download activities.
  891. [ OK ] Listening on D-Bus System Message Bus Socket.
  892. [ OK ] Reached target Sockets.
  893. [ OK ] Started Daily Cleanup of Temporary Directories.
  894. [ OK ] Started resolvconf-pull-resolved.path.
  895. [ OK ] Reached target Paths.
  896. [ OK ] Reached target Basic System.
  897. [ OK ] Started ntp-systemd-netif.service.
  898. Starting Initializes zram swaping...
  899. Starting Login Service...
  900. [ OK ] Started D-Bus System Message Bus.
  901. Starting WPA supplicant...
  902. Starting resolvconf-pull-resolved.service...
  903. Starting Resets System Activity Data Collector...
  904. Starting Generate SSH keys if not there...
  905. Starting Dispatcher daemon for systemd-networkd...
  906. [ OK ] Started Set the CPU Frequency Scaling governor.
  907. Starting Rock 64 First boot...
  908. Starting Network Manager...
  909. [ OK ] Started Daily apt upgrade and clean activities.
  910. [ OK ] Reached target Timers.
  911. [ OK ] Started Regular background program processing daemon.
  912. Starting System Logging Service...
  913. [ OK ] Started Network Name Resolution.
  914. [FAILED] Failed to start Initializes zram swaping.
  915. See 'systemctl status zram-config.service' for details.
  916. [ OK ] Started resolvconf-pull-resolved.service.
  917. [ OK ] Started Resets System Activity Data Collector.
  918. [ OK ] Started Generate SSH keys if not there.
  919. [ OK ] Started Rock 64 First boot.
  920. [ OK ] Started Login Service.
  921. [ OK ] Started WPA supplicant.
  922. [ OK ] Reached target Host and Network Name Lookups.
  923. [ OK ] Started ntp-systemd-netif.service.
  924. Starting Hostname Service...
  925. Starting resolvconf-pull-resolved.service...
  926. [ OK ] Started System Logging Service.
  927. [ OK ] Started resolvconf-pull-resolved.service.
  928. [ OK ] Started Hostname Service.
  929. [ OK ] Started ntp-systemd-netif.service.
  930. Starting resolvconf-pull-resolved.service...
  931. [ OK ] Started resolvconf-pull-resolved.service.
  932. [ OK ] Started Network Manager.
  933. Starting Network Manager Script Dispatcher Service...
  934. [ OK ] Reached target Network.
  935. Starting Permit User Sessions...
  936. Starting OpenBSD Secure Shell server...
  937. [ OK ] Started Permit User Sessions.
  938. [ OK ] Started Serial Getty on ttyS2.
  939. Starting Set console scheme...
  940. [ OK ] Started Network Manager Script Dispatcher Service.
  941. [ OK ] Started Set console scheme.
  942. [ OK ] Created slice system-getty.slice.
  943. [ OK ] Started Getty on tty1.
  944. [ OK ] Reached target Login Prompts.
  945. [ OK ] Started OpenBSD Secure Shell server.
  946. Starting Authorization Manager...
  947. [ OK ] Started Authorization Manager.
  948. [ OK ] Started Dispatcher daemon for systemd-networkd.
  949. [ OK ] Reached target Multi-User System.
  950. [ OK ] Reached target Graphical Interface.
  951. Starting Update UTMP about System Runlevel Changes...
  952. [ OK ] Started Update UTMP about System Runlevel Changes.
  953.  
  954.  
  955. Ubuntu 18.04.1 LTS rockpro64 ttyS2
  956.  
  957. rockpro64 login: Stopping Authorization Manager...
  958. [ OK ] Stopped target Graphical Interface.
  959. [ OK ] Stopped target Multi-User System.
  960. [ OK ] Stopped Resets System Activity Data Collector.
  961. Stopping Hostname Service...
  962. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
  963. Stopping Session 2 of user rock64.
  964. [ OK ] Stopped target Timers.
  965. [ OK ] Stopped Discard unused blocks once a week.
  966. Stopping Dispatcher daemon for systemd-networkd...
  967. Stopping Regular background program processing daemon...
  968. Stopping User Manager for UID 1000...
  969. [ OK ] Stopped Daily Cl Stopping Serial Getty on ttyS2...
  970. [ OK ] Stopped Message of the Day.
  971. [ OK ] Stopped Daily apt upgrade and clean activities.
  972. [ OK ] Stopped Daily apt download activities.
  973. [ OK ] Stopped target System Time Synchronized.
  974. [ OK ] Stopped Dispatcher daemon for systemd-networkd.
  975. [ OK ] Stopped Regular background program processing daemon.
  976. [ OK ] Stopped Hostname Service.
  977. [ OK ] Stopped Serial Getty on ttyS2.
  978. [ OK ] Stopped Getty on tty1.
  979. [ OK ] Stopped OpenBSD Secure Shell server.
  980. [ OK ] Stopped Authorization Manager.
  981. [ OK ] Stopped Session 2 of user rock64.
  982. [ OK ] Stopped Generate SSH keys if not there.
  983. [ OK ] Removed slice system-getty.slice.
  984. [ OK ] Removed slice system-serial\x2dgetty.slice.
  985. [ OK ] Stopped System Logging Service.
  986. [ OK ] Stopped User Manager for UID 1000.
  987. [ OK ] Removed slice User Slice of rock64.
  988. Stopping Login Service...
  989. Stopping Permit User Sessions...
  990. [ OK ] Stopped Permit User Sessions.
  991. [ OK ] Stopped target Remote File Systems.
  992. [ OK ] Stopped target Network.
  993. Stopping Network Name Resolution...
  994. Stopping WPA supplicant...
  995. Stopping Network Manager...
  996. Stopping Raise network interfaces...
  997. [ OK ] Stopped Network Name Resolution.
  998. [ OK ] Stopped WPA supplicant.
  999. Stopping Network Service...
  1000. [ OK ] Stopped Network Service.
  1001. [ OK ] Stopped Login Service.
  1002. [ OK ] Stopped Raise network interfaces.
  1003. [ OK ] Stopped Network Manager.
  1004. [ OK ] Stopped target Network (Pre).
  1005. Stopping D-Bus System Message Bus...
  1006. [ OK ] Stopped D-Bus System Message Bus.
  1007. [ OK ] Stopped target Basic System.
  1008. [ OK ] Stopped target Slices.
  1009. [ OK ] Removed slice User and Session Slice.
  1010. [ OK ] Stopped target Sockets.
  1011. [ OK ] Closed Syslog Socket.
  1012. [ OK ] Stopped target Paths.
  1013. [ OK ] Stopped resolvconf-pull-resolved.path.
  1014. [ OK ] Closed D-Bus System Message Bus Socket.
  1015. [ OK ] Stopped target System Initialization.
  1016. Stopping Update UTMP about System Boot/Shutdown...
  1017. [ OK ] Stopped target Local Encrypted Volumes.
  1018. [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
  1019. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
  1020. [ OK ] Stopped Apply Kernel Variables.
  1021. Stopping Load/Save Random Seed...
  1022. Stopping Restore / save the current clock...
  1023. [ OK ] Stopped Load Kernel Modules.
  1024. Stopping Network Time Synchronization...
  1025. [ OK ] Stopped Load/Save Random Seed.
  1026. [ OK ] Stopped Restore / save the current clock.
  1027. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  1028. [ OK ] Stopped Network Time Synchronization.
  1029. [ OK ] Stopped Create Volatile Files and Directories.
  1030. [ OK ] Stopped target Local File Systems.
  1031. Unmounting /boot/efi...
  1032. Unmounting /run/user/1000...
  1033. [ OK ] Unmounted /run/user/1000.
  1034. [ OK ] Stopped target Swap.
  1035. [ OK ] Unmounted /boot/efi.
  1036. [ OK ] Reached target Unmount All Filesystems.
  1037. [ OK ] Stopped target Local File Systems (Pre).
  1038. [ OK ] Stopped Create Static Device Nodes in /dev.
  1039. [ OK ] Stopped Remount Root and Kernel File Systems.
  1040. [ OK ] Reached target Shutdown.
  1041. [ OK ] Reached target Final Step.
  1042. Starting Reboot...
  1043. [ 37.561199] reboot: Restarting system
  1044. DDR Version 1.13 20180801
  1045. In
  1046. soft reset
  1047. SRX
  1048. Channel 0: LPDDR4,50MHz
  1049. CS = 0
  1050. MR0=0x98
  1051. MR4=0x3
  1052. MR5=0xFF
  1053. MR8=0x8
  1054. MR12=0x4D
  1055. MR14=0x4D
  1056. MR18=0x0
  1057. MR19=0x0
  1058. MR24=0x8
  1059. MR25=0x0
  1060. CS = 1
  1061. MR0=0x18
  1062. MR4=0x3
  1063. MR5=0xFF
  1064. MR8=0x8
  1065. MR12=0x4D
  1066. MR14=0x4D
  1067. MR18=0x0
  1068. MR19=0x0
  1069. MR24=0x8
  1070. MR25=0x0
  1071. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  1072. Channel 1: LPDDR4,50MHz
  1073. CS = 0
  1074. MR0=0x98
  1075. MR4=0x3
  1076. MR5=0xFF
  1077. MR8=0x8
  1078. MR12=0x4D
  1079. MR14=0x4D
  1080. MR18=0x0
  1081. MR19=0x0
  1082. MR24=0x8
  1083. MR25=0x0
  1084. CS = 1
  1085. MR0=0x18
  1086. MR4=0x3
  1087. MR5=0xFF
  1088. MR8=0x8
  1089. MR12=0x4D
  1090. MR14=0x4D
  1091. MR18=0x0
  1092. MR19=0x0
  1093. MR24=0x8
  1094. MR25=0x0
  1095. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  1096. 256B stride
  1097. channel 0
  1098. CS = 0
  1099. MR0=0x98
  1100. MR4=0x81
  1101. MR5=0xFF
  1102. MR8=0x8
  1103. MR12=0x72
  1104. MR14=0x72
  1105. MR18=0x0
  1106. MR19=0x0
  1107. MR24=0x8
  1108. MR25=0x0
  1109. CS = 1
  1110. MR0=0x18
  1111. MR4=0x3
  1112. MR5=0xFF
  1113. MR8=0x8
  1114. MR12=0x72
  1115. MR14=0x72
  1116. MR18=0x0
  1117. MR19=0x0
  1118. MR24=0x8
  1119. MR25=0x0
  1120. channel 1
  1121. CS = 0
  1122. MR0=0x98
  1123. MR4=0x3
  1124. MR5=0xFF
  1125. MR8=0x8
  1126. MR12=0x72
  1127. MR14=0x72
  1128. MR18=0x0
  1129. MR19=0x0
  1130. MR24=0x8
  1131. MR25=0x0
  1132. CS = 1
  1133. MR0=0x18
  1134. MR4=0x3
  1135. MR5=0xFF
  1136. MR8=0x8
  1137. MR12=0x72
  1138. MR14=0x72
  1139. MR18=0x0
  1140. MR19=0x0
  1141. MR24=0x8
  1142. MR25=0x0
  1143. channel 0 training pass!
  1144. channel 1 training pass!
  1145. change freq to 400MHz 0,1
  1146. channel 0
  1147. CS = 0
  1148. MR0=0x98
  1149. MR4=0x1
  1150. MR5=0xFF
  1151. MR8=0x8
  1152. MR12=0x72
  1153. MR14=0x72
  1154. MR18=0x0
  1155. MR19=0x0
  1156. MR24=0x8
  1157. MR25=0x0
  1158. CS = 1
  1159. MR0=0x18
  1160. MR4=0x81
  1161. MR5=0xFF
  1162. MR8=0x8
  1163. MR12=0x72
  1164. MR14=0x72
  1165. MR18=0x0
  1166. MR19=0x0
  1167. MR24=0x8
  1168. MR25=0x0
  1169. channel 1
  1170. CS = 0
  1171. MR0=0x98
  1172. MR4=0x81
  1173. MR5=0xFF
  1174. MR8=0x8
  1175. MR12=0x72
  1176. MR14=0x72
  1177. MR18=0x0
  1178. MR19=0x0
  1179. MR24=0x8
  1180. MR25=0x0
  1181. CS = 1
  1182. MR0=0x18
  1183. MR4=0x81
  1184. MR5=0xFF
  1185. MR8=0x8
  1186. MR12=0x72
  1187. MR14=0x72
  1188. MR18=0x0
  1189. MR19=0x0
  1190. MR24=0x8
  1191. MR25=0x0
  1192. channel 0 training pass!
  1193. channel 1 training pass!
  1194. change freq to 800MHz 1,0
  1195. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  1196. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  1197. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  1198. OUT
  1199. U-Boot SPL board init
  1200.  
  1201. U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09)
  1202. booted from SD
  1203. Trying to boot from MMC2
  1204. mmc_load_image_raw_sector: mmc block read error
  1205. SPL: failed to boot from all boot devices
  1206. ### ERROR ### Please RESET the board ###
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!